Nobex radio Issue - "Invalid Parent Application"

Hi there hope you guys can help me as I really want this app and don't mind paying for it. I recently got my Bold 9900, and It doesn't want to install the premium version of nobex even after I choose the premium it does a free version install.
When I do want to go to premium through the option in the free version nobex, it gives me the error message "Invalid parent application". I deleted it a few times already and tried installing it in many ways but to no avail. It keeps installing free version even after I chose the premium in the app store. Please help this is driving me insane. :/
Regards,
Marcel

I had same problem. try contact their support. I sent them email, in few hours they updated my account and all good. best application what I have in my phone and support

Similar Messages

BPEL Deployment issue - parent application (orabpel) is not found!

Hello everyone,
I've a got a small issue while deploying the Oracle's VocationRequest BPEL project to the my BPEL Server. It produces the following output:
--- BEGIN ---
parent application (orabpel) is not found!
[deployTaskForm]
[deployTaskForm]
BUILD FAILED
C:\Jdeveloper10.132\jdev\mywork\HumanWorkFlow\simplewf\build.xml:98: Error while deploying the form on server "uranus" Error message :
java.lang.SecurityException
     at oracle.ide.IdeCore$7.checkExit(IdeCore.java:177)
     at java.lang.Runtime.exit(Runtime.java:88)
     at java.lang.System.exit(System.java:868)
     at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.executeCommand(Oc4jAdminCmdline.java:127)
     at com.collaxa.cube.ant.taskdefs.DeployForm.deployIAS(DeployForm.java:750)
     at com.collaxa.cube.ant.taskdefs.DeployForm.deployForm(DeployForm.java:548)
     at com.collaxa.cube.ant.taskdefs.DeployForm.deployForms(DeployForm.java:814)
     at com.collaxa.cube.ant.taskdefs.DeployForm.execute(DeployForm.java:840)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
--- END ---
I've been looking at other resource for help but are unable to find anything which is relevant. Your time and help is much appreciated.
Thanks and Regards,
John

Advanced version is when you have created the dehydration store in a database of your choice. It also creates a separate oc4j instance (oc4j_soa).
Basic means that it installs the dehydration store into an Oracle lite database. It also stores all deployements into the oc4j instance home.
You can check this by going to the enterprise manager and see what oc4j instances have been created. If you see home and oc4j_soa I would sugest that you have done an advanced install. If you only see the home oc4j instance I would say that you have a basic install.
Now to answer your question. Looking at your note you are pointing the application server to the home instance. If you look at you Integration server you point this to your application server connection. This is home. If you have done an advanced install this should be oc4j_soa.
Plan of attack.
Check what install you have by looking at the enterprise manager.
If it is advanced chnage your JDev connection to oc4j_soa.
Otherwise update the post and we will go from there.
cheers
James

Bridge's Parent Application is Not Active, Bridge Requires That a Qualifying Product Has Been Launch

Has anyone figured out how to fix this? Tried fixes & I still can not open RAW files from Bridge or Photoshop CS5. I upgraded the Camera RAW plug-in and downloaded all fixes for Photoshop CS5 ( done automatically through Adobe updater) so program is up to date. I can open RAW files from mini bridge if I right click the photo BUT if I take the photo back to Bridge I can not open it there. ( I could do this before the upgrades so this is not different ). I have windows 7 professional 32 bit. I tried DNG files & .cr2 files.
In Photoshop CS4 I had the same problem ( almost the same error message...bridge requires a qualify product to be launched at least once... Camera RAW) and it was never fixed but I didn't understand the advantages of working in camera RAW. So it may be the same glich if I had it in CS4 & CS5. Thanks in advance for your help.

i ran into the same issue just this last week....and i finally found (at least in my case) the SOLUTION...i'd D/Led the trial version of adobe illustrator...something in that download, or the preference choices that followed afterward, KICKED my "Parent Application," which had always been photoshop CS4, to the curb! realizing, as i've had to in the past, that i should "look back to what you'd done just prior to the change (with its resulting ERROR message) and UNDO it." ergo: i dumped the trial version of illustrator, and VOILA! i can now, once again, open jpgs by opting for "open in camera raw" directly from the BRIDGE again...hope this helps! too bad newly added ADOBE programs don't ask you to actually ESTABLISH which of their programs you would LIKE to designate as the PARENT APPLICATION when you're loading said new software!

Bridges Parent application error

When I try to open a picture with camera raw in bridge I get an error that says, "Bridges parent application is not active, Bridge requires that a qualifying product has been launched." What can I do about this?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Redeploy parent application with Enterprise Manager

If I attempt to redeploy a parent application using Enterprise Manager I get the following error:
"Only a single application can be redeployed at a time. Only childless applications can be Redeployed"
I don't understand why I am being prevented from doing something seemingly trivial. Why do I need to go through the process of undeploying all child applications and then deploying them again?

Luis,
If all of the files uploaded piecemeal worked fine, then I believe your problem to be with your deployment descriptor(s). Also, note that the .war file lives in a different directory:
C:\oc4j\j2ee\home\applications\Application-Name
Perhaps if you have time you could post all of the associated deployment descriptor files. Log files from the C:\oc4j\j2ee\home\log\oc4j directory would also help to troubleshoot your deployment issues. You can turn up the logging level to "FINEST" for maximum output to your log file.
-Michael

Invalid Parent Path in Archive

Secure Access V2.0 returned an error when I tried to open my vault. After I type in the password I get the error message, "Invalid Parent Path In Archive". When I click 'OK' I get the standard "4 Ways To Protect Your Data" screen as usual when I open a vault. When I click the 'Next" button I get the error, "This vault could not be loaded, it may be located on another computer or the original vault file has been manually removed." After I click OK the main screen opens. It has the vault listed, but if I click on it I get the same error message. Whats going on? How can I access my vault? It is my backup for important documents and archives. No, I haven't moved or deleted the vault. The vault is located on the memory stick.I only work from one computer running Windows 7. This particular Sandisk 32 Extreme is never used with any other computer. I haven't changed the password. Everything was working fine until I just couldn't sign in.

Hello, There are some steps you can try in order to recover the vault files . 1) copy the vault and secure access application from the write protected drive over to the new drive2) run secure access on the new drive3) when it prompts to create a new vault go ahead and create a new vault with the exact same password as the old vault4) encrypt any file in the new vault (this will generate two new system files)5) close secure access6) open the vault folder on the new drive via windows explorer, navigate to the system files folder, you should see several files, among them are two sets of "USB Flash Drive-XXXXXXXXXXXXXXX.idx and .bak files7) Looking at the date stamps of the files, 2 will be older and 2 will be newer (you can also check on the old write protected drive to confirm the names of the older files, the older files contain the encryption information needed however the file name is associated with the previous drive we will need to rename the old files)8) copy the 2 newer files and paste them into any temporary location outside of the flash drive (i.e.. desktop)8) once you've copied the two new files to a temporary location delete the originals from the system files folder on the flash drive.9) go to the temporary location and copy only the file name from the .idx file (the file name, not the file itself)10) go to the vault / system files and rename the old .idx file with the name you copied from the new .idx file11) repeat the same for the idx.bak file12) now you should have renamed the old .idx and .idx.bak files with the names of the newly generated system files.

HOWTO: Specify the parent application attribute during deployment

Hi all,
I wonder how can I specify the "parent application" attribute in order to deploy my application correctly
(I am trying to deploy a BPEL application and I am needing to specify the "-parent orabpel" option in the admin.jar execution... but I didn't also find how to solve this problem in a general way...)
Thank you in advance for your help

I am very sorry with you, but I decided to put this question here, because the problem IS NOT BPEL related... (as I mentioned in my original post)
If I build an application... for example "App1", and I deployed in the Oracle AS 10g, and then I want to deploy from my JDeveloper the "App2", but I want to specify that "App1" is parent application of "App2".... How can I do it from JDeveloper without using the admin.jar utility or using the EM console from my App Server?
In my humble opinion (I am not an ACE member)... is a general problem of the IDE more than specific to BPEL
Thank you again if someone can give me a real clue on this issue...

In a multiple monitor situation, how do I get popup windows to open on the same monitor as the parent application is displayed.

I have two monitors. I have an application that I run all day, displayed on my secondary monitor. Whenever a popup windows is launched form that application, it always opens on the primary monitor. Very annoying. Any way to get the popup to launch in on the same monitor as the parent application?

Did you solve this problem ?

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

Issue is TEXT_IO application API is not working in report builder 10g.

Issue is TEXT_IO application API is not working in report builder 10g.
TEXT_IO application api is working in report builder 6i. (Not working in upgrade from Oracle EBiz 11i to Oracle Ebiz R12)
I saw that details in some forums, client_text_io is available for form builder 10g.
Is any other api available for report builder 10g?
If it is available what steps we need to do?

All the CLIENT_% procedures are part of webutil in Forms. Forms uses the Java applet on the client PC to perform actions on the local PC via webutil. This is not possible for Reports.
You can still use text_io on the server, but you need some other way to copy the files to/from the client PC.
I wonder how you used the functionality in EBS R11. Even R11 uses web reports, so text_io already worked on the server, not the client PC.

Creative Zen Radio Issue

Creative Zen Radio Issue?Hey,
I've had this creative zen player for some time now whilst im overall happy with my product, sadly there is all of a sudden a issue with it.
When i listen to the radio then lock it to just enjoy it - if i then unlock it, some times the screen locks up and stays black.
Whilst a reset solves this it doesn't stop it happening again.
But (this is a big but)...
The volume which i have on safely low - goes to compelte maximum with sound safety option off. It almost defeaned me when it occured and had ringing in my ears. I have booked an appointment with doctors as the ringing yes not really gone since.
Additionally im pretty sure my headphones are screwed as they were totally distorted when this occured which has probably ruined the quality of the speakers which were only a few months old.
So is this well known ? Cos im surprised no one has sued for loss of hearing if others have had this issue. I've yet to have my medical results on it - but would mostly prefer to have my mp3 fixed or replaced cos i cannot risk using it and having it do it again and make my hearing become damaged.
Thanks for reading.

Does the radio stop working right after lock? I locked the player right after choosing a radio station and the player continues to play. You might want to contact our Customer Support to see if they can help you further.

Bridge's parent application is not active

Hi,
I've suddenly come across a problem with Adobe Bridge where it isn't allowing me to open .CR2 files into Camera Raw. When I right click on an image in Bridge, an error message pops up:
"Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature."
Originally, I opened Photoshop CS6, then File > Browse in Bridge. I've have opened ACR hundreds of times on this computer so I don't understand why it wants me to open it to be able to use it. I've opened a RAW file from Windows explorer, but when going back to Bridge, the same error occurs.
Does anyone know what the problem is here and how to fix it?
Running Windows 7, Photoshop CS6 64-bit, ACR 7.1, Bridge CS6 64-bit.
Thank you!

Then, in Bridge, I get the dreaded "Camera Raw blah blah blah" message when trying to open files in ACR by pressing 'cmd-R' or going to File > Open in Camera Raw.
This seems related to an old thread and I'm using email to read and write to the forum. Can you clarify a bit more about the blahblah?
You stated that it happened suddenly this morning and also mention a subscription trouble with the creative cloud. Did you use Bridge after the trouble was solved and it worked but stopped this morning or was it directly after you reinstalled everything?
Did you already try the obvious restart Bridge holding down option key and choose reset preferences? The Clean tool is not deleting everything Adobe has installed before.
And double check on the updates, the application manager sometimes has a mind of its own, especially when having multiple language versions installed, it only updates the language version set in preferences.
And check PS the About Menu
for about PS it should say 13.1.2 x64
and about plug in / camera raw it should say 7.3.0.71.
And in Bridge About Bridge it should say 5.0.2.4
Can you confirm this and can you also report what other applications you have installed from the creative cloud.
And since I changed to OSX 10.8 I can't check myself, is 10.7.5 the latest update?

Bridge CC parent application is not active

Hi, I'm currently using elements 13 (that's both premiere and photoshop) on windows 7 64 bit. I installed Bridge CC specifically to use the camera Raw feature, however as the title says every time I attempt to open a .cr2 file using camera raw it brings up the message "bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature."
Now I assume a qualifying product would be photoshop, which i've opened before, I've looked around elsewhere for solutions and only found swapping the AMTlib.dll which hasn't worked at all for me as it just breaks bridge completely. This is bearing in mind that everything worked fine on elements 12 on my previous PC but I've gotten rid of that and there's no way for me to able to access it now.
Thanks for the help in advance.

Bridge CC only works with CC products not Elements versions of anything which have their “Organizer”.

What does 'Bridge's parent application is not active" mean?

I just installed Adobe CS5 design premium and I am trying to open Camera RAW files in Bridge in Camera RAW, but it keeps giving me an error saying, "Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature." What does this mean? What am I supposed to do in order to use this feature of Bridge? Thanks for helping me.

This has been a problem for some. Try opening Bridge from Photoshop or another application, rather than from the Bridge icon.

Bridge's parent application is not active. Bridge requires that a qualifying ....

Hi,
After installing CS6, whenever I try to open Camera Raw Preference, I get this error message ....
Bridge's parent application is not active. Bridge requires that a qualifying product has been lauched at least once to enable this feature
Can anybody kindly tell me exactly what this means, and more important, how to fix this problem?
Thank you.

Most of the time it means you have an expired Adobe trial on your computer. Bridge is waiting for it to give command. Find and uninstall the trial.

Nobex radio Issue - "Invalid Parent Application"

Similar Messages

Maybe you are looking for