NoClassDefinitionFoundException when using additional libraries
I run an applet that has it's classes packaged in a jar file. Since I use additional libraries, that I added to this jar file, running the applet causes a NoClassDefinitionFoundException. The applet can't find the libraries it needs. I created the jar with eclipse's "export as jar", my eclipse-project has the additional libraries in it's build path as external jars. Why can't the applet find them though they are in the archive-jar-file? Where do I have to put them or what do I have to do to make the applet find them?
If you're doing stuff with applets then I think all the classes have to be packaged in the same jar. A jar inside a jar might work, but I haven't tried it.
Similar Messages
-
How to use additional libraries in a project
I am trying to call an existing EJB from page bean. And for the life of me, I can not figure out how to add additional libraries to Creator project.
Is it supported at this stage?Right click on the References node in the project navigator and select: Add New Library Reference. In the subsequent dialog, specify the path to the jar file you wish to include. This library will be automatically added to the application classpath at design time and deployed with the application when you run the project.
-
Error messages in iTunes when using multiple libraries
Hi there -- my boyfriend got a new iPod yesterday, a 5th generation 30G. I have a 4th generation 20G that I've been using for about half a year. After some difficulty getting it set up, thanks to extra editions of iPod software on the computer conflicting with iTunes 7, we finally got the iTunes recognizing his new iPod.
I created a seperate library for him (like you can in iPhoto, where you press shift when you start the program to choose your library). When I plug the 30G iPod in, iTunes recognizes it and starts updating. It gets about halfway through the songs that need to be updated, and then an error popup shows up that says something like "iPod cannot continue updating because the file or folder is corrupted." It's not stopping on a particular song or album; it seems to stop about halfway through the list of songs it's updating, whether it's adding 10 songs or 50. If I click "OK" (the only option), it continues updating; when it's done I get the "iPod has finished updating" message.
Then, if I press eject I get another error: "iPod cannot eject because it is being used by another program." The iPod still has the "Do Not Disconnect" symbol at this time, instead of switching to charging like it should once it's done updating. I have to pull the USB cord from the computer or shut down iTunes to get it to stop.
The iPod will update and seems to work fine, but this makes me worry that there's a problem that will only get worse with time, and I'd rather deal with it now. I also don't know if I should keep disconnecting the iPod when it's tell me not to even though it's updated, if I can help it.
Is it the software on the iPod (fully updated)? Or perhaps having two libraries (the one with the problems is not the original one)? iTunes was deleted and reinstalled last night with the help of Apple's phone support, so it's new.
For the record, my 4th generation iPod updates fine with my library, with no error messages, and ejects as it should. I haven't tried it with the second library; I also haven't tried using the 5th generation iPod with a new library or my existing, original one.Latest problem now with iTunes is that I can't connect to the iTunes store or update art work. Freezes up. Clearly they nerfed old iTunes to make us upgrade to an inferior version. So frustrating.
-
Have a Windows 7 machine with terabytes of HDD space and 8 Gigs RAM. Two iTunes libraries (mine and my wife's with about 10% file overlap). Two iPhone 5s (iOS 6.0.2), 1 iPad 2 (iOS 6.0.1), 1 iPad 3 (iOS 5.1.1), and a jailbroken iPhone 3GS 32 GB that we've converted to an iPod essentially (iOS 3. something--not willing to update given the historically bad performance of the new iOS on the 3GS). Running iTunes 10 (also not willing to update to 11 after reading reviews).
I get multiple errors in both libraries with lots of popup boxes saying devices cannot connect, be properly identified, or sync, etc. Disconnecting and reconnecting via cable is marginally better (more so with the 3GS less with the iPads).
I'd like to be able to link certain devices to certain libaries (i.e. my iPhone5 and iPad3 with my library and my wife's iPhone5, iPad2, iPhone 3GS with her library). Instead it seems the wrong devices always show up or none at all.
Any suggestions would be most welcome. I have a moderately high level of tech expertise, so if there are scripts or hacks to be written/run I wouldn't be shy about trying them. Also would consider an iTunes alternative given that Apple isn't interested in supporting users with massive music libraries who need powerful databases as opposed to the dumbed down stuff they are trying to push in 11.
Thanks!
PS also my home sharing doesn't work at all on any device, but that seems to be Apple standard
tags: home_sharing ios windows7 working sync_itunes iphone5 ipad2 ipad3 iphone3gs multiple_libraries multiple_users multiple_devices sync itunes10 computer 10.5Latest problem now with iTunes is that I can't connect to the iTunes store or update art work. Freezes up. Clearly they nerfed old iTunes to make us upgrade to an inferior version. So frustrating.
-
Which file/folder to select when using multiple libraries?
I've recently decided to split my library and my mom's library - but we still share a computer. And I'm not sure which file or which folder to say is the correct one for each library. For right now, each library is the same, but if I add a CD and she adds a different CD, we shouldn't be able to access each other's - and I'm trying to set it up so that doesn't happen.
Except I'm not tech savvy enough to do that.
Any help would be greatly appreciated.tanner,
I don't have Vista in front of me, but on Win 7 you can set up a new account by Start > Control Panel > Add or Remove User Accounts > Create New Account.
Go ahead and create a new account and play with it a little. It won't affect anything in the existing account. When you feel comfortable, set up a new iTunes library in it. -
9i form gen : hangs when using object libraries
9i form gen seems to hang (no progress, pegs the CPU) when specifying any object library. I thought that perhaps the OFGSTND1.OLB hadn't been recompiled for forms 9, but even after recompilation it happens. I have double checked paths, etc. (the generator refers to the right .olb just before hanging...)
Anyone else experienced this or have a workaround?Hi Trevor,
I tried generating a Form base don EMP Table with Object library Ofgstnd1.olb.It worked fine.Can you try and generate the form without any library attachement and see if it is hanging still or not.Because there seems to be no problem with the object library.Do tell me if you can generate the form easily without attachement.
Thanks
Vishal -
Super slow connection when using additional linksys SD205 router with WRT54G
Hi there,
I have a WRT54G that distributes my cable modem's internet connection. All my wired and wireless connections work perfectly.
I recently got a Linksys SD205 5 port switch and connected it to a wired port on my WRT54G router, then connected 3 network devices to this 5 port switch (a mac running OS10.4.10, a pc running winXP SP2, and a network printer).
The problem with this setup is that my internet connection has now slowed to an absolute crawl - if it works at all.
I've tried switching cables but nothing makes a difference. Plugging directly into the WRT54G eliminates the problem - network speed goes back to normal.
What am i missing here? Shouldn't this type of setup just work? Any help would be greatly appreciated!
thanks
BrendanThe WRT54G firmware is version 8. I just upgrade to v8.02. and now everything's working fine. thanks for reminding me to do the obvious
Message Edited by birdog on 09-20-2007 08:57 AM -
We have a signed Java applet that uses external libraries, specifically the OpenOffice application libraries.
We have a problem running Java applet with 7u51 of "InvocationTargetException" when use these libraries OpenOffice, that is not signed; regardless of the browser used (Mozilla Firefox, Explorer, Chrome).
Please, as you could solve this problem? This problem can not arose with 7u40 and earlier..
Best regards.In java - JRE 1.7.0_51-b13 and signed applet - Stack Overflow found solution. I've missed to add in external jars manifest this:
Trusted-Library: true -
I meet a problem about linking when I use Sharing Libraries.
I meet a problem when I use Sharing Libraries.
When I debug my flash on my local end, I can set the URL to "ShareLibrary.swf" (For “Export for runtime sharing”).
All Files linking the file "ShareLibrary.swf" are working correctly.
But When I put this swf on the net, the link can't work unless changing the URL to full path including the ip address.
Is there any way that I can make it work using the same URL, no matter the file is on the local or on the net?Morning Alex,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iPhone: Sound muffled or low from the speaker or when speaking into the mic.
http://support.apple.com/kb/TS1631
Resolution
Check the following:
Check the volume setting on your iPhone. You can adjust the volume by pressing the volume up and down buttons on the left side of the iPhone.
If you are using a third-party iPhone case, make sure it is not covering the speaker, microphone, or top microphone. Try making some calls without the case to see if a caller can now hear you more clearly or play music to see if the speaker's volume is better.
If you have not removed the plastic display film used for protection during shipment, either ensure that the microphone and speaker are not covered or remove the film completely.
Check that the speaker, microphone mesh covers, and top microphone hole are not clogged with lint or other debris.
If the speaker, microphone mesh, or top microphone (iPhone 4 only) appear clogged, please use a clean, small, dry, soft-bristled brush to clean them. To do this follow these instructions:
Use the brush to carefully and gently brush the speaker and microphone mesh.
Brush away from the 30-pin dock connector to avoid getting any debris into the dock connector.
Hope this helps,
Mario -
How can I show additional tab rows when using many open tabs?
How can I show additional tab rows when using many open tabs?
What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
The Tab bar should be displayed above the Navigation Toolbar.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
ID CS5: problem with using Boost libraries in plugin
Hi all!
I try to use Boost libraries in my plugin.
When just add a line
#include <boost/asio.hpp> ------ included in SDK in external\asl\boost_libraries\boost
after (also before) line
#include "VCPlugInHeaders.h" ---
the result is
error C2064: term does not evaluate to a function taking 0 arguments
what corresponds to file "external\asl\boost_libraries\boost/asio/error.hpp(220)".
Error also remains when insert #include statement in VCPlugInHeaders.h directly.
If I compile my code out of SDK environment (as outstanding project) --- no problems at all.
Probably need additional configuration of Boost in SDK environment?
Thanks in advanse for your help!If using "asio C++ library" separately of Boost --- the plugin compiles without errors and works.
-
Adobe Photoshop CS4/5 Crashes when using the Move Tool
Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel -
Application crashes when using JNI with Jdk 1,2, 1.3 and 1.4
Hi!
I have this application that has a GUI written in Java and a file parser written in C. JNI is used to connect these parts together. The problem is that the application only works when I am using jdk 1.1.8 but not when using jdk1.2, jdk1.3 or jdk1.4. I am running the application on a Solaris 8 machine.
I have not written the application myself but I am going to be working with it from now on. But I have today little knowledge with JNI and I have tried different approaches to solve the problem. For example I have tried to used DDD together with GDB to find out what the problem is but with no luck. When I run the application using jdk1.4 I get the following error when the JVM crashes:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 10 occurred at PC=0xFA023164
Function=Java_Bitmap_setDebug+0x1C
Library=/usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Current Java thread:
at Bitmap.setDebug(Native Method)
at DisplayPanel.loadFile(DisplayPanel.java:396)
at MicPlot.loadFile(MicPlot.java:1452)
at MicPlot.loadFile(MicPlot.java:1441)
at MicPlot.miOpen_Action(MicPlot.java:1267)
at MicPlot$SymAction.actionPerformed(MicPlot.java:1184)
at java.awt.MenuItem.processActionEvent(MenuItem.java:588)
at java.awt.MenuItem.processEvent(MenuItem.java:548)
at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:285)
at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:273)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:452)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Dynamic libraries:
0x10000 /opt/java/jdk1.4/bin/java
0xff360000 /usr/lib/libthread.so.1
0xff3a0000 /usr/lib/libdl.so.1
0xff280000 /usr/lib/libc.so.1
0xff270000 /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1
0xfe000000 /opt/java/j2sdk1.4.1/jre/lib/sparc/client/libjvm.so
0xff220000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff1d0000 /usr/lib/libm.so.1
0xff250000 /usr/lib/libw.so.1
0xff0e0000 /usr/lib/libmp.so.2
0xff0b0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/native_threads/libhpi.so
0xff080000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libverify.so
0xff030000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libjava.so
0xfe7e0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libzip.so
0xfe4e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xedd00000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libawt.so
0xfc480000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libmlib_image.so
0xfc410000 /opt/java/j2sdk1.4.1/jre/lib/sparc/motif21/libmawt.so
0xeda80000 /usr/dt/lib/libXm.so.4
0xfa090000 /usr/openwin/lib/libXt.so.4
0xfa3d0000 /usr/openwin/lib/libXext.so.0
0xfc7e0000 /usr/openwin/lib/libXtst.so.1
0xed980000 /usr/openwin/lib/libX11.so.4
0xfa2a0000 /usr/openwin/lib/libdps.so.5
0xfa3b0000 /usr/openwin/lib/libSM.so.6
0xfa1d0000 /usr/openwin/lib/libICE.so.6
0xed880000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libfontmanager.so
0xfa390000 /usr/openwin/lib/locale/common/xlibi18n.so.2
0xfa1b0000 /usr/openwin/lib/locale/iso8859-1/xomEuro.so.2
0xfa190000 /usr/lib//liblayout.so
0xfa050000 /usr/openwin/lib/locale/common/ximlocal.so.2
0xfa010000 /usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Local Time = Thu Oct 3 13:32:47 2002
Elapsed Time = 35
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1-beta-b14 mixed mode)
# An error report file has been saved as hs_err_pid27692.log.
# Please refer to the file for further information.
Abort
From this information I think that the problem should be in the native method setDebug. But I have tried to set a breakpoint at the beginning of that function in the C part but with no luck. The application crashes before it reaches that position in the C file.
What could possibly go wrong between the setDebug function in the C part and the function call in the Java part?
When using GDB, GDB cannot figure out what is wrong it just returns a hex address, no function name.
I would really appreciate some help. I have tried everything that I can come up with!
Best regards
LarsI have figured out that the application fails on its first call to the native methods.
So I have this Bitmap class that contains all the native calls and it is defined shortly as follow:
public class Bitmap {
static {
System.loadLibrary("BitmapImpl");
native void setDebug(int debuglevel, int statistics);
There are many more native methods defined in Bitmap, but I only show the setDebug method because that is the first one that is executed and also the one that immediately fails.
My setDebug C function is defined as follow in BitmapImpl.c
#include <time.h>
#include <stdio.h>
#include <limits.h>
#include <fcntl.h>
#include <jni.h>
#include <math.h>
#include <errno.h>
#include "Bitmap.h"
#include "data.h"
jint debug = 0;
jint statistics = 1;
JNIEXPORT void JNICALL Java_Bitmap_setDebug
(JNIEnv *jenv, jobject jo, jint d, jint s)
debug = d;
statistics = s;
My libBitmapImpl.so file is compiled using the following Makefile and using GNU gcc:
JAVAPATH=$(JAVAINCLUDEPATH)
LMACRO=-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSOLARIS
CSOURCE=BitmapImpl.c
all:
gcc -O3 -G $(LMACRO) -I$(JAVAPATH) -I$(JAVAPATH)/solaris \
$(CSOURCE) -o libBitmapImpl.so
It is still a total mystory why the application fails. I have tried it on a RedHat Linux machine and there it works fine. But not on Solaris. Only if I use the jdk1.1.8 but not a later one.
Would really appreiciate some help!
Best regards
Lars -
When using Iphoto to import photo from existing folder to iphoto, what happens if:
1. I delete that photo in iphoto? will the original file in the folder be deleted too ?
2. when importing, does the hard disk store 2 versions of the photo, hence occupying additional space in the harddisk?1 - no -- iPhoto only manages fiel within the iPhoto library - it does not ever do anything with files outside the library
2 - No idea what you are asking - by default (and strongly recommended) iPhoto copies the original to the iPhoto library and you delete the source file outside the iPhoto library - iPhoto alwasy has at least two versions of every photo and some times three - it always have the original, a thumbnail and once a photo is modified a preview - this is not optional - if it is not what you want then iPhoto is not the correct progrtam to be using for phopto management
LN -
Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5
My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please HelpThanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off
Maybe you are looking for
-
Portrait Orientation - Pagination / Layout Inspector "Header Height"?
OK, I started playing with iBooks Author and I've managed to create my first book, with various images and framed text boxes in the page layout. Although this was easily achieved in just a few hours, I note I spent most of the time struggling to get
-
When adding Custom Text to a slideshow in Aperture, I can no longer centre the text in the text box. Is there something I am missing? I am running Aperture 3.6 on Yosemite. Any ideas gratefully received, thanks.
-
ID PDF into Quark, won't print
I know I know, I need to switch to InDesign and send Quark packing but right now that's not possible. I have clients who send me ID PDF's and I have to import them in our layout in Quark 6.5. (I'm using an Intel Mac OS 10.4.11) It'll let me import th
-
Problem instalation Premiere elements 12
Hi I buy APE 12 with canon 6D. I have a problem with install Elements 12. When I click on New project i have to login on Adobe, and my program not running.
-
HT4528 Clicking sound when making a phone call
Clicking sound when making phone call