Node and System Parameters

Hi all,
Thanks to an excellent article in last month's Sound on Sound and the purchase of my new Dual 2.7 G5 I just got my first Logic node configured and it works great. I'm actually using a dual 1.3 G4 (upgraded) Quicksilver via gigabit ethernet. I use VNC to control the node computer, which incidentally doubles as my iTunes server. . .
The only hitch in the process is that every time I launch Logic 7.1 I get this message:
"Some of your system parameters must be changed to maximize performance of Logic Node connections."
Then it askes me for my admin password, and it runs just fine. The requested right is system.privelege.admin. Funny thing is that this happens also when I quit Logic.
Is there a way to permanently give Logic this privilege? I tried fixing permissions on both my main machine (G5) and my node machine (G4).
Thanks!
Brett Strader
Lush Music
Napa, CA

VNC is awesome. You will be so happy. . .
You need a VNC server app on each of your node machines. The one I use is OSXVnc. You can get it (free) at:
http://www.redstonesoftware.com/vnc.html
It's really easy to set up, just make sure the firewall settings on your node machine allow Apple Remote Desktop (which is based on VNC), and Remote Login.
On your main Logic Computer, you'll need a VNC client. A popular one is Chicken of the VNC, which is available at:
http://sourceforge.net/projects/cotvnc/
Make sure your port settings are correct (copy them down from the server). Login, and you will see your node machine's dektop appear in a window.
Have fun!
Brett

Similar Messages

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Registering with the WebEx Data Center and the Cisco WebEx Node Management System

Dear guys, ...
Please help,
i want to implement to webex node ASR1000, i have read in "Configuring the Cisco Webex Node for ASR 100.pdf", there is prerequisites to implement it, that is "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Can someone tell how to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Are there any step by step documentation to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"?
Thank you
BR

You should have received a PAK Key with your order. Go to Cisco licensing and enter the PAK Key as this will start the process. Once the PAK Key is validated a screen will be displayed to enter your request for ASR 100 integration. It normally takes a few days to a couple of weeks to get the information back from WebEx needed to configure your ASR.
If you did not get a PAK Key contact your WebEx rep to get the process started to integrate your ASR to your WebEx site.
Hope this helps
John

Dataguard using ASM in primary node and FILESYSTEM in standby node

Hi There!
I need to configure a Dataguard, and my primary DB is working on ASM, the standby node is going to be using filesystems, so I want to know if there is a guide that I can follow in order to get this task successfully completed.
My operating system is Solaris 10, and the DB Release is 10.2.0.4. I want to know the best practices.
Also I want to remember some RMAN Restore and Recover techniques to have this configuration ready, up and running.
Thanks in Advance.
Paola
@>--->----

setting this up isn't that different to setting up a single instance standby on ASM,
the MAA guide is here
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.pdf
this details the configuration using ASM on both sides, if you want to use filesystem storage on the standby then the following parameters will need to be changed
*.db_file_name_convert='+DATA/CHICAGO/','+DATA/BOSTON/','+RECOVERY/CHICAGO','+RECOVERY/BOSTON'
*.log_file_name_convert='+DATA/CHICAGO/','+DATA/BOSTON/','+RECOVERY/CHICAGO','+RECOVERY/BOSTON'
to something like
*.db_file_name_convert='+DATA/CHICAGO/','/oradata/boston','+RECOVERY/CHICAGO','/recovery/boston'
*.log_file_name_convert='+DATA/CHICAGO/','/oradata/boston','+RECOVERY/CHICAGO','/recovery/boston'
alternativly you can set the DB_CREATE_FILE_DEST and DB_CREATE_ONLINE_LOG_DEST_n parameters and let oracle create OMF files for the dataguard instance.
Chris

Java Dispatcher not coming up,Server node and SDM is running.

Hi Everyone,
While starting my Java instance, Dispatcher is stopped with return code "666",Server node and SDM is running.This is all of sudden not sure what has changed.
I have changed the heap size value of dispatcher ,Did cleanipc ,But still no luck.
My heap size parameters are according to SAP note:
Note 0001024539 - Recommended Settings for NW04 >= SP14, NW 7.0 >= SP6 on AIX-BPBO.
Java version :
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20080923 (SR12) (JIT enabled: jitc))
Please find below dispatcher error log.
Mon Jan 10 15:36:04 2011
JVMDUMP006I Processing Dump Event "systhrow", detail "java/lang/OutOfMemoryError" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/core.20110110.153604.2523266.0001.dmp'
Note: "Enable full CORE dump" in smit is set to FALSE and as a result there will be limited threading information in core file.
Mon Jan 10 15:36:14 2011
JVMDUMP010I System Dump written to /usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/core.20110110.153604.2523266.0001.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/Snap.20110110.153604.2523266.0002.trc'
JVMDUMP010I Snap Dump written to /usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/Snap.20110110.153604.2523266.0002.trc
JVMDUMP007I JVM Requesting Heap Dump using '/usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/heapdump.20110110.153604.2523266.0003.phd'
Mon Jan 10 15:36:15 2011
JVMDUMP010I Heap Dump written to /usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/heapdump.20110110.153604.2523266.0003.phd
JVMDUMP007I JVM Requesting Java Dump using '/usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/javacore.20110110.153604.2523266.0004.txt'
JVMDUMP010I Java Dump written to /usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher/javacore.20110110.153604.2523266.0004.txt
JVMDUMP013I Processed Dump Event "systhrow", detail "java/lang/OutOfMemoryError".
</verbosegc>
[Thr 6428] JLaunchIExitJava: exit hook is called (rc = 666)
[Thr 6428] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 6428] SigISetIgnoreAction : SIG_IGN for signal 20
[Thr 6428] JLaunchCloseProgram: good bye (exitcode = 666)
Could somebody help...
Thanks

Hi John ,Thanks
The dispatcher connects to only one server node.dev_dispatcher content details below.
JStartupIReadSection: read node properties [ID18122300]
-> node name          : dispatcher
-> node type          : dispatcher
-> node execute       : yes
-> jlaunch parameters :
-> java path          : /usr/java14_64
-> java parameters    : -Xmn70M -Xgcpolicy:gencon -verbose:gc -Xj9 -Xdump:system:events=systhrow,filter=java/lang/OutOfMemoryError,request=exclusive+prepwalk -Djava.security.policy=.\java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1
-> java vm version    : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142-20080923 (JIT enabled)
-> java vm vendor     : IBM J9 VM (IBM Corporation)
-> java vm type       : server
-> java vm cpu        : ppc64
-> heap size          : 200M
-> init heap size     : 200M
-> root path          : /usr/sap/D10/DVEBMGS01/j2ee/cluster/dispatcher
-> class path         : ./bin/boot/boot.jar:./bin/system/bytecode.jar:.
-> OS libs path       : /usr/sap/D10/DVEBMGS01/j2ee/os_libs
-> main class         : com.sap.engine.boot.Start
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : /usr/sap/D10/DVEBMGS01/exe/jstartup.jar:/usr/sap/D10/DVEBMGS01/exe/jvmx.jar
-> shutdown class     : com.sap.engine.boot.Start
-> parameters         :
-> debuggable         : no
-> debug mode         : no
-> debug port         : 50000
-> shutdown timeout   : 120000
[Thr 1] JLaunchISetDebugMode: set debug mode [no]
[Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [dispatcher]
-> stack   : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Xmn70M
-> arg[ 4]: -Xgcpolicy:gencon
-> arg[ 5]: -verbose:gc
-> arg[ 6]: -Xj9
-> arg[ 7]: -Xdump:system:events=systhrow,filter=java/lang/OutOfMemoryError,request=exclusive+prepwalk
-> arg[ 8]: -Djava.security.policy=.\java.policy
-> arg[ 9]: -Djava.security.egd=file:/dev/urandom
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -Dsys.global.dir=/usr/sap/D10/SYS/global
-> arg[ 12]: -Dapplication.home=/usr/sap/D10/DVEBMGS01/exe
-> arg[ 13]: -Djava.class.path=/usr/sap/D10/DVEBMGS01/exe/jstartup.jar:/usr/sap/D10/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/system/bytecode.jar:.
-> arg[ 14]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/D10/DVEBMGS01/exe:
/usr/sap/D10/DVEBMGS01/exe:/usr/sap/D10/DVEBMGS01/exe:/usr/TDAccess2.4.1:/usr/sap/D10/SYS/exe/run:/oracle/client/10x_64/instantclient:/
usr/java14_64/jre/bin/j9vm:/usr/sap/D10/DVEBMGS01/exe::/usr/lib:/usr/sap/D10/DVEBMGS01/j2ee/os_libs:/usr/sap/D10/DVEBMGS01/exe:/usr/sap/D10
/DVEBMGS01/exe:/usr/sap/D10/DVEBMGS01/exe:/usr/TDAccess2.4.1:/usr/sap/D10/SYS/exe/run:/oracle/client/10x_64/instantclient
-> arg[ 15]: -Dmemory.manager=200M
-> arg[ 16]: -Xmx200M
-> arg[ 17]: -Xms200M
-> arg[ 18]: -DLoadBalanceRestricted=no
-> arg[ 19]: -Djstartup.mode=JCONTROL
-> arg[ 20]: -Djstartup.ownProcessId=2748598
-> arg[ 21]: -Djstartup.ownHardwareId=U0234126406
-> arg[ 22]: -Djstartup.whoami=dispatcher
-> arg[ 23]: -Djstartup.debuggable=no
-> arg[ 24]: -DSAPINFO=D10_01_dispatcher
-> arg[ 25]: -DSAPSTART=1
-> arg[ 26]: -DCONNECT_PORT=64999
-> arg[ 27]: -DSAPSYSTEM=01
-> arg[ 28]: -DSAPSYSTEMNAME=D10
-> arg[ 29]: -DSAPMYNAME=eccdcs1s_D10_01
-> arg[ 30]: -DSAPPROFILE=/usr/sap/D10/SYS/profile/D10_DVEBMGS01_xxxxxxx
-> arg[ 31]: -DFRFC_FALLBACK=ON
-> arg[ 32]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 33]: -DSAPSTARTUP=1
-> arg[ 34]: -DSAPSYSTEM=01
-> arg[ 35]: -DSAPSYSTEMNAME=D10
-> arg[ 36]: -DSAPMYNAME=xxxxxxxx_D10_01
-> arg[ 37]: -DSAPDBHOST=xxxxxxx
-> arg[ 38]: -Dj2ee.dbhost=xxxxxx
Edited by: Khaiser Khan Mohammed on Jan 18, 2011 11:19 AM

Reg Input parmeters and Output parameters.

Hi frnds,
            I would like to know about Input parameters and Ouput parametets.How they can be used in Smartforms. could please provide me some expamles if any.
Regards many,

Defining a Form Interface
Use
You define a form interface to send data from your application to a form.
Integration
The form interface is a part of the Interface form object and is defined in the Form Builder. The form interface of a form is structured in the same way as the interface of a function module in the system. However, form interfaces do not support Changing parameters.
Prerequisites
●     You have created an Interface form object.
●     The application program provides the data that you want to insert in the form. Therefore, you already know the types of the corresponding variables.
The semantics of the valid parameter types match the semantics of a function module,
See also:
Getting Information about Interface Parameters
Overview of Function Modules (in ABAP Workbench: Tools)
Creating Function Modules (in ABAP Programming (BC-ABA))
Procedure
       1.      Open the required interface in the Repository Browser of the ABAP Workbench.
       2.      The Interface tab is displayed. Under Form Interface, double-click the Import node.
       3.      You see a screen for entering import parameters. This screen also shows the standard parameter /1BCDWB/DOCPARAMS. You cannot change this parameter.
You use this parameter in your application program, to specify the value for the language setting, for example. To display this structure in the ABAP Dictionary, double-click the SFPDOCPARAMS type.
       4.      XML schema-based interface
○     The standard parameter /1BCDWB/DOCXML with the type XSTRING is used for sending data from the application program.
ABAP-based or Smart-Forms-compatible interface
○     To insert a new line, choose Insert Line (). Enter the parameter names of the data you want to import. These names are valid for the whole form and do not have to match the variable names in the data collection program. All data types are valid. TYPE can be selected under Type Assignment.
       5.      When you double-click Export, you see the standard parameter /1BCDWB/FORMOUTPUT of the generated function module. You cannot change this parameter.
You use this parameter in your application program, to make the generated form available as a PDF for further processing, for example.
       6.      To display the exceptions used by the generated function module, double-click Exceptions.
       7.      Activate the interface.
At runtime, the application program must provide the parameters. If a parameter has been defined in the form, but is not defined when the application program is called, then the output of the form ends with the program crashing (hex dump).
However, it is also possible that the application program provides parameters that the form does not need. You do not need to mention these parameters in the form; they can also be specified in a different order from the code of the application program. This has the advantage that an application program can work with several different forms.
Migrated Smart Forms Interface or New Smart Forms-Compatible Interface
When you edit the interface of a migrated Smart Form or a new interface that is compatible with Smart Forms, the Tables option gives you extra parameters. When you set the Import, Export, and Exceptions parameters, the system also lets you use the standard parameters from the Smart Forms.
If you have a Smart Forms-compatible interface, you can use the existing application program of this Smart Form without making any modifications. (See also Switching Runtime in Migrating Smart Forms.)
Result
You have defined the form interface and you can use the specified parameter names in the form context.
http://help.sap.com/saphelp_nw2004s/helpdata/en/da/8fcc44d98b4e8bac6f102aa1fc69cc/content.htm

Problem with childs nodes and automatic key mapping in a Data Object

Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.

The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers

Move node and its silings from one jtree to another

Hi,
I am trying to move JTree nodes and its siblings from one JTree to another. If anyone has the code, please post it on the website or mail to [email protected]
Thanks
Pavan

Pavan,
You may have to do a sanity check before adding it.
Better run the program in a debugger and have a break point at the clipBoard.put() line. Else system.out.println() lines will kill enormouse programming time rather than using debugger.
Also in following this thread, i found that you may have to be bit more thorough with the DefaultMutableTreeNode class first.
Thanks,
ananth
Thomas,
for (int p = 0; p < jtree.getSelectionCount(); p++) {
               System.out.println(".3.......p= "+p);
node =
=
(EuamDefaultMutableTreeNode)paths[p].getLastPathCompon
nt();
                    clipBoard.put(node.toString(), node);
               System.out.println(".4...........");
Giving error at clipBoard.put()
line....java.lang.NullPointerException
..Any idea why?
Thanks.
Pavan

"waiting" and "system error" status cannot be resent in rwb?

Hi,gurus:
In RWB->MESSAGE MONITORING,I can't resend or cancel the messages with the status " waiting" and "system error".
when I clicked "resend" button,it asked for user and password.After I was authentificated,the system didn't resend a message. Have you ever met this issue?
By the way,I could resend the error messages before.
Thanks in advance.

Hi,
I checked the note 1233918,and it talked about the same issue.
But the solution is as follows,which I don't know what to do.(Our PI version is PI7.0 SR3 SP14)
Symptom
When the first message for a managed system is cancelled or resent, after pressing ok in the logon pop-up nothing happens - message is not resent or cancelled. The logon data is correct, since subsequent resend/ cancel works without further logon request. Another symptom is cancelling or resending a wrong message, when using the filter mechanism in the table. E.g. the table displays messages A, B, C, D. If message C is selected and after that the filter is set so that message C is hidden from the filter selection, when selecting message D and trying to resend/cancel it, message C is cancelled/resent (the hidden one, previously selected) and nothing is happening with message D.
Other terms
NWA, PI, Message monitoring, resend, cancel
Reason and Prerequisites
The UI Proxy connection was not obtained properly. Another reason - TableAccessories was not invalidating the nodes properly. Also after filtering the result list, resend/cancel was taking wrong message Ids.
Solution
For SP5 install LMNWABASICCOMP05P_1.SCA or higher patch level.
For SP6 install LMNWABASICCOMP06P_1.SCA or higher patch level.

Mail Adapter - Dynamically maintaining To and From Parameters

Hi all,
I am using the mail adapter as receiver in my scenario where i need to set up the TO and FROM parameters dynamically in the adapter configuration. Can any body please suggest how to do that?
Thanks
-Kulwant

Kulwant,
Did you gone thru this link?
http://help.sap.com/saphelp_nw70/helpdata/EN/6b/4493404f673028e10000000a1550b0/content.htm
use the below code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/Mail","THeaderTO");
String to_add = "[email protected]"
conf.set(key, to_add);
return "";
raj.
Edited by: Raj on Oct 29, 2008 3:55 PM

Jtree Select node and change leafs icon problem

Hi All,
i create a tree and implement a TreeSelectionListener:
my mission is whenever i select a node i need to change the icon of this node (for now.later i will have to find if it have childrens).
import java.awt.Color;
import java.awt.Component;
import java.util.Enumeration;
import java.util.NoSuchElementException;
import java.util.Vector;
import javax.swing.ImageIcon;
import javax.swing.JTree;
import javax.swing.event.TreeExpansionEvent;
import javax.swing.event.TreeExpansionListener;
import javax.swing.event.TreeSelectionEvent;
import javax.swing.event.TreeSelectionListener;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
import javax.swing.tree.TreeModel;
import javax.swing.tree.TreeNode;
import javax.swing.tree.TreePath;
public class TreeView{
     DefaultMutableTreeNode top;
     JTree tree ;
     Color frameColor;
     public static ImageIcon NoTSelIcon;
     public static ImageIcon SelIcon;
    public static String[] name= new String[8];
     public TreeView(Color BackColor) {
          // TODO Auto-generated constructor stub
        top = new DefaultMutableTreeNode("Diagnostics");
        this.frameColor=BackColor;
         SelIcon = createImageIcon("../Resource/Images/Select.gif");
         if (SelIcon == null)
             System.err.println("Tutorial icon missing; using default.");
         NoTSelIcon = createImageIcon("../Resource/Images/NotSelc.gif");
           if (NoTSelIcon == null)
             System.err.println("Tutorial icon missing; using default.");
     public Component createTreeComponents(){
            //Create the nodes.
             createNodes(top);
        //Create a tree that allows one selection at a time.
        tree = new JTree(top);
        //TREE LISTENERS
        //Treeselction listener
        Handler hObject = new Handler();
        tree.addTreeSelectionListener(hObject);
       //Tree expand/collapse listener
        HandlerExpansionListener hObjectExpan = new HandlerExpansionListener();
        tree.addTreeExpansionListener(hObjectExpan);
//       tree.getSelectionModel().setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
        //set tree background
        tree.setBackground(frameColor);
         tree.setCellRenderer(new OverrideTreeCellRenderer(frameColor,SelIcon,NoTSelIcon));
        return tree;
      private void createNodes(DefaultMutableTreeNode top) {
             DefaultMutableTreeNode category = null;
             DefaultMutableTreeNode SubCategory = null;
             DefaultMutableTreeNode SubCategoryBasee = null;
             DefaultMutableTreeNode SubSubCategoryBasee = null;
             category = new DefaultMutableTreeNode("Dfe");
             top.add(category);
             //Sub test visible
             SubCategory = new DefaultMutableTreeNode("Test Visible");
             category.add(SubCategory);
             SubCategory.add(new DefaultMutableTreeNode("Son 1"));
             SubCategory.add(new DefaultMutableTreeNode("Son 2"));
             SubSubCategoryBasee = new DefaultMutableTreeNode("Test Base");
             SubSubCategoryBasee.add(new DefaultMutableTreeNode("Grandson 1"));
             SubSubCategoryBasee.add(new DefaultMutableTreeNode("Grandson 2"));
             SubCategory.add(SubSubCategoryBasee);
      class Handler implements TreeSelectionListener {
               public void valueChanged(TreeSelectionEvent arg0) {
                    // TODO Auto-generated method stub
                    System.out.println("treeSelect event ");
                    TreePath trph;
                    trph=arg0.getNewLeadSelectionPath();
                    int count=trph.getPathCount();
                    DefaultMutableTreeNode Selnode = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
                    String Name = (String)Selnode.getUserObject();
                    setSelected(Selnode,true);
                    int number_ofnodes=getNodeCountBelow((TreeModel)tree.getModel() , Selnode, false);
                    System.out.println("The Number of nodes under "+Name+"="+number_ofnodes);
                    tree.setCellRenderer(new IconRenderer(SelIcon,NoTSelIcon,frameColor));
      class HandlerExpansionListener implements TreeExpansionListener {
               public void valueChanged(TreeSelectionEvent arg0) {
                    // TODO Auto-generated method stub
                    DefaultMutableTreeNode node = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
                    if (node == null) return;
                  }     // The inner class
               public void treeCollapsed(TreeExpansionEvent arg0) {
                    // TODO Auto-generated method stub
                    System.out.println("treeCollapsed event ");
               public void treeExpanded(TreeExpansionEvent arg0) {
                    // TODO Auto-generated method stub
                    System.out.println("treeExpanded event ");
      /** Returns an ImageIcon, or null if the path was invalid. */
         protected static ImageIcon createImageIcon(String path) {
              //ImageIcon imcon= new ImageIcon(path);
              //return imcon;
             java.net.URL imgURL = TreeView.class.getResource(path);
             if (imgURL != null) {
                 return new ImageIcon(imgURL);
             } else {
                 System.err.println("Couldn't find file: " + path);
                 return null;
         DefaultMutableTreeNode newnode;
         public void setSelected(DefaultMutableTreeNode Selnode ,boolean isSelected)
                Enumeration Enchilds=Selnode.children();//ENUMRATE ALL CHILDS FOR THIS NODE
             if (Enchilds != null)
                  while (Enchilds.hasMoreElements())
                       newnode=(DefaultMutableTreeNode)Enchilds.nextElement();
                       String NameSel = (String)newnode.getUserObject();
                       setSelected(newnode,isSelected);
         //GETTING THE TREE DEPTH
         public int getNodeCountBelow(TreeModel model, Object node, boolean includeInitialNode)
             int n = includeInitialNode ? 1 : 0;
             for (int i = 0; i < model.getChildCount(node); i ++)
                 n += getNodeCountBelow(model, model.getChild(node, i), true);
             return n;
import java.awt.Color;
import java.awt.Component;
import java.util.Enumeration;
import java.util.NoSuchElementException;
import javax.swing.Icon;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
public class IconRenderer extends DefaultTreeCellRenderer {
     private static final long serialVersionUID = 1L;
     Icon SelectedIcon;
     Icon NotSelectedIcon;
     Color BackgroundColor;
     boolean Selected=false;
     boolean Leaf=false;
     boolean IsItaChild=false;
     DefaultMutableTreeNode SelctedNode=null;
    public IconRenderer(Icon SelIcon,Icon NoTSelIcon,Color Bacground) {
         SelectedIcon = SelIcon;
         NotSelectedIcon = NoTSelIcon;
         BackgroundColor=Bacground;
         setBackgroundNonSelectionColor(BackgroundColor);
    public Component getTreeCellRendererComponent(JTree tree,Object value,boolean sel,boolean expanded,
                                                    boolean leaf,int row,boolean hasFocus)
         super.getTreeCellRendererComponent(tree, value, sel,expanded, leaf, row,hasFocus);
         Selected=sel;
         Leaf=leaf;
         DefaultMutableTreeNode node = (DefaultMutableTreeNode) value;
         String s2 = (String)node.getUserObject();
   return this;
}my problem is :
when i select a node the the method "getTreeCellRendererComponent"
start to run on the entire tree from buttom to top and than from top to buttom.
for me it waste of time because if has say 100 nodes it wont botthers me.
but i have 20000 nodes and more its take a time.
and for all this nodes i have to make compares.
is there a way to force the DefaultTreeCellRenderer to not run the entire tree???
Thanks

You need to make sure that your TreeModel interprets your group nodes to be non-leaf nodes (one of the methods in the TreeModel interface is called isLeaf). If you are using a DefaultTreeModel with DefaultMutableTreeNode objects, you can use the askAllowsChildren property of DefaultTreeModel and the allowsChildren property of DefaultMutableTreeNode to control this. See the API for more details:
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/tree/DefaultTreeModel.html
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/tree/DefaultMutableTreeNode.html

ORA-01078: failure in processing system parameters LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'

I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
I have following users and groups as
[grid@orcl11g ~]$ id grid
   uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
[grid@orcl11g ~]$ id oracle11g
   uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
.bash_profile edited for oracle11g user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=ora11g
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=ora11g
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
.bash_profile edited for grid user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=+ASM
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid
export GRID_HOME=$ORACLE_BASE/product/11.2.0/grid
export ORACLE_SID=+ASM
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
When I log on as grid user. I check the followings:
[grid@orcl11g ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[grid@orcl11g ~]$ srvctl status database -d ora11g
Database is running.
[grid@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> select status from v$instance;
STATUS
STARTED
Till here everything seems to be OK!!!!
When I log as oracle user. I check the followings:
[oracle11g@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> select status from v$instance;
select status from v$instance
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'
Also when I log on as a grid user again and use following commands to shutdown and start database again the STATUS of instance is again STARTED not OPEN.
[grid@orcl11g ~]$ srvctl stop database -d ora11g -o normal
[grid@orcl11g ~]$ srvctl start database -d ora11g
And also when I edit /etc/oratab file. I change N to Y for +ASM. But when restart system it seems not changed value is N again.
    +ASM:/u01/app/grid/product/11.2.0/grid:N   # line added by Agent
     ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
NOW QUESTIONS!!!!!
1. Why I can't change the status of database to OPEN as grid user?
2. The status is always STARTED when querying v$instance. İs it status of +ASM or database?
3. When checking database as grid user it seems to be Database runnning... If running why it is not in OPEN state? What is running means here?
4. When I log on as oracle user and query v$instance, then error shown above occured. And also when startup the database then another error occured as in above. WHY?
5. When I edit /etc/oratab file manually why second row saved but the first one is changed after restart the system?
6. Normally, which user have to start, stop or manage database? I think that oracle user is necessary for managing database and the grid user is only for managing ASM and Oracle Restart.
PLEASE HELP ME TO SOLVE THIS CHAOTİC SİTUATİON!!!
Thanks,
DBA_84

I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox)
Pl identify exact version of 11gR2 to 4 decimal places. As noted in your other thread - Failed to start oracle-ohasd, error: Inappropriate ioctl for device ohasd failed to start at roothas.pl - you will need a minimum version of 11.2.0.3 for Linux 6.x - using a lower version may result in unexpected issues or problems.

Import and export parameters of an FM are passed by value---why?

Q] By default the import and export parameters of an FM are passed by value---what is the advantage of this system?

Hi,
Import and export parameters are, by default, passed by value. However, they can also be passed by reference. Tables parameters can only be passed by reference.
Pass by reference means, passing the address itself rather than passing the value.
I guess passing by value is easier and advantageous

OEM Issue: oemagent stops after some time on specific node on a 3 node RAC system.

We have a 3 node RAC system running 11.2.0.3 .
The oemagent keeps failing on 1 particular node and needs to be brought up every now and then. What could be the probable cause of this. Also, I have not seen anything suspicious in the agent logs.
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.2.0
OMS Version       : 12.1.0.2.0
Protocol Version : 12.1.0.1.0
Last successful upload                       : 2015-03-10 07:28:10
Last attempted upload                        : 2015-03-10 07:28:10
Total Megabytes of XML files uploaded so far : 0.08
Number of XML files pending upload           : 0
Size of XML files pending upload(MB)         : 0
Available disk space on upload filesystem    : 78.16%
Collection Status                            : Collections enabled
Heartbeat Status                             : Ok
Last attempted heartbeat to OMS              : 2015-03-10 07:28:25
Last successful heartbeat to OMS             : 2015-03-10 07:28:25
Next scheduled heartbeat to OMS              : 2015-03-10 07:29:25
Agent is Running and Ready
Sometimes while checking status we often get the followinG:
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Status agent Failure:unable to connect to http server at https://<servername>:<port>/emd/lifecycle/main/ [peer not authenticated]
Agent is Not Running
Any help?

We have a 3 node RAC system running 11.2.0.3 .
The oemagent keeps failing on 1 particular node and needs to be brought up every now and then. What could be the probable cause of this. Also, I have not seen anything suspicious in the agent logs.
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.2.0
OMS Version       : 12.1.0.2.0
Protocol Version : 12.1.0.1.0
Last successful upload                       : 2015-03-10 07:28:10
Last attempted upload                        : 2015-03-10 07:28:10
Total Megabytes of XML files uploaded so far : 0.08
Number of XML files pending upload           : 0
Size of XML files pending upload(MB)         : 0
Available disk space on upload filesystem    : 78.16%
Collection Status                            : Collections enabled
Heartbeat Status                             : Ok
Last attempted heartbeat to OMS              : 2015-03-10 07:28:25
Last successful heartbeat to OMS             : 2015-03-10 07:28:25
Next scheduled heartbeat to OMS              : 2015-03-10 07:29:25
Agent is Running and Ready
Sometimes while checking status we often get the followinG:
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Status agent Failure:unable to connect to http server at https://<servername>:<port>/emd/lifecycle/main/ [peer not authenticated]
Agent is Not Running
Any help?

Increase the SGA_MAX_SIZE and SGA_TARGET parameters

HI ,
I am using oracle 10g R2 and windows server 2003 .
My server is having 8 GB RAM .
I want to increase the SGA_MAX_SIZE and SGA_TARGET parameters .
I am using the below command , but getting the error
SQL> alter system set sga_max_size=2000M scope=spfile ;
alter system set sga_max_size=2000M scope=spfile
ERROR at line 1:
ORA-32001: write to SPFILE requested but no SPFILE specified at startup
Can someone please help ..

hi
connect as sys user and then try...
first make folder as backup and then copy the old SPFILEorcl to the same folder(backup)
now you can easily modify the files otherwise you will get error..
you will find here..
C:\ORACLE_HOME\database
SQL> alter system set sga_max_size=2000M scope=spfile ;
System altered.OR.
connect as sys user.
and do the following...
1).SQL>create pfile from spfile;
2).modify the pfile and decrease\increase the size of pools.
3).shutdown database.
4). Startup database using created pfile.
if it start ok then.
5.) Recreate the Spfile with the created Pfile.
SQL>create spfile from pfile;sarah

Node and System Parameters

Similar Messages

Maybe you are looking for