Node Application - effectivness?
Just how effective is it when a another Mac is used as a Node. I am currently using a G4 PowerBook 1.25GHz (2G RAM) which is struggling with my extensive use of software instruments and plug-ins.
I am considering purchasing the latest edition of the G5 dual-core PowerMac 2.0GHz to use solely as a Node, but I would like to know just how much better this would make my set up before I spend the cash.
Can anyone advise me please??
Thanks for the replies.
Going further, since logic only works with its own samples, and logic installs them, i believe in user/ library. Then if we install
outside samples there, will they be noded. ??
I took most of the samples that came with logic CD out because they luged the program too much. Maybe its after using logic manager.? I don't use its own manager at all anymore. Redmatica EXS Manager is what is recomended.
One last point, the new VSL upgrade is called to be also able to instal inside logic. Humm.
Similar Messages
-
Node application G4 dual 450/macmini/LaCie
is it possible to chain together a Dual 450 G4 a mac mini intel dual and a LaCie HD and run the Node application to spread the processor weight?
thanksPat,
When connected, does it show up in Disk Utility? If so, it's failure to mount is probably due to restrictive permissions and differing ownership. In other words, you probably have permissions for the volume set such that only the "owner" can access it, and said ownership differs on your G4 tower.
In fact, the drive is probably mounting, but the mounted volume is inaccessible to you (on the tower).
If you find that the drive is, in fact, showing up in Disk Utility, and you wish to access it from the tower, let us know. There are steps you can take to correct the problem.
Scott -
Patch applying on Two node application server(load balancing)
Hi,
We have Two aplication servers with load balancing with PCP.
I want to know about applying patches order.
First patch has to be applied on primary applicaton node.
and next it has to be applied on secodary application node.
Please confirm.
Regards,
maleemmaleem wrote:
Hi Mapps,
We do not have shared aplicaton Tier. I think in that case we have to apply patches on both applicaton nodes.
am i right? please correct me if i am wrong.
Regards,
maleem
Correct.
Thanks,
Hussein -
Applications Module distribution among database nodes
Hello Pros,
I am an Oracle database administrator who is very new to the Oracle applcations 11i. I was wondering if there where a mechanism to distribute the application modules between Oracle database nodes.
The architechure we have is two node applications server and two nodes oracle database server. I need to know if it is possible from the "application manager" to distribute the requests between the database nodes so that the "self service", "workflow, and "payroll" go to database node 1, reports and external thin client applications goes to database node 2.
Can we do that ? I can see from the database that the node 1 is too busy and node 2 tothing to do but to receive cr from the other database node.
Please advice whether it is possible to do
Thank you in advance.
Regards,
C.You'll have better luck posting in the right forum. This one is for issues relating to Oracle's ODBC driver.
I'm not familiar enough with JDEV to know which forum that is top of my head though.
Greg -
Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface. -
We are getting problem in deploying our application on SAP NetWeaver. We have downloaded Sneak Preview edition of SAP NetWeaver 6.40 SP 11. We deployed our war file using Deploy Tool. But our application could not load JDBC drivers and giving following exception.
Wed Jul 26 16:49:19 GMT+05:30 2006 Failed to load Database Driver: sun.jdbc.odbc.JdbcOdbcDriver
Wed Jul 26 16:49:19 GMT+05:30 2006 Unable to load database driver = JdbcOdbcDriver
Wed Jul 26 16:49:19 GMT+05:30 2006 Failed to get Database Connection for user : sa and database name : native
java.sql.SQLException: [Microsoft][SQLServer JDBC Driver][SQLServer]Login failed for user 'sa'.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSLoginRequest.processReplyToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at com.ourapplication.server.framework.pool.JDCConnectionPool.getConnection(JDCConnectionPool.java:173)
at com.ourapplication.server.framework.pool.PoolManager.getConnection(PoolManager.java:455)
at com.ourapplication.server.framework.audit.AuditManager.getInstance(AuditManager.java:115)
at com.ourapplication.server.util.Macros.initializeServerProperties(Macros.java:307)
at com.ourapplication.server.util.Macros.<init>(Macros.java:252)
at com.ourapplication.server.util.Macros.<clinit>(Macros.java:245)
at com.ourapplication.server.framework.pool.PoolManager.init(PoolManager.java:162)
at com.ourapplication.server.framework.pool.PoolManager.<init>(PoolManager.java:112)
at com.ourapplication.server.framework.pool.PoolManager.getInstance(PoolManager.java:130)
at com.ourapplication.server.security.ExtSecurityManagerModule.readFromDatabase(ExtSecurityManagerModule.java:599)
at com.ourapplication.server.security.ExtSecurityManagerModule.<init>(ExtSecurityManagerModule.java:125)
at com.ourapplication.server.security.ExtSecurityManagerModule.<clinit>(ExtSecurityManagerModule.java:105)
at com.ourapplication.server.login.UserLoginServlet.init(UserLoginServlet.java:52)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:134)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:376)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Wed Jul 26 16:49:19 GMT+05:30 2006 Error while reading maximum log entry : java.lang.NullPointerException
Our application is properly running on other application servers. Please help us. Thanks in advance.Hi,
Please check whether JDBC drivers are registered in Visual Admin.
Please follow following steps
Check your JDBC driver is registered. or else you have register it
1. Start the Visual Admin tool
2. Open the node Services under the server you want to check.
3. Click on the entry ClassLoader Viewer under Services. 5. The components are displayed in the right window. Open the node Applications in the right window.
6. Check for the entry in sap.com/com.sapportals.connectors.database and click on it.
Under sap.com/com.sapportals.connectors.database, your JDBC driver should be available.
<b>Connection URL:</b> jdbc:sap:oracle://<Host_Name/IP_ADDRESS>:<DB_PORT>;SID=<SID>
<b>Driver Class Name:</b> com.sap.portals.jdbc.oracle.OracleDriver -
Oracle SQL Developer and Application Express
Hi all,
I have a SQL Developer 1.5.4.59.40 and have an application developed in Application Express 10G XE with APEX 3.1.2. I have successfully opened my schema which owns an application, but to my surprise there is no node for viewing my application????? How can i view my application?
With Regards,
Sunil Bhatia - Programmer
Eon Technologies Pvt Ltd
Edited by: Sunil Bhatia on Mar 26, 2009 9:39 AMHello,
If you go to your parsing scheme in SQL Developer for ex. SCOTT you'll see a node Application Express.
That should list all the applications that have the SCOTT parsing scheme defined in your APEX application.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum -
Problem in NODE 1 after reboot
Hi,
Oracle Version:11gR2
Operating System:Cent Os
Hi we have some problem in node 1 after sudden reboot of both the nodes when the servers are up the database in node 2 started automatically but in node 1 we started manually.
But inthe CRSCTL command it is showing that node 1 database is down as show below.
[root@rac1 bin]# ./crsctl stat res -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.ASM_DATA.dg
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.ASM_FRA.dg
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.LISTENER.lsnr
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.OCR_VOTE.dg
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.asm
ONLINE ONLINE rac1 Started
ONLINE ONLINE rac2 Started
ora.eons
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.gsd
OFFLINE OFFLINE rac1
OFFLINE OFFLINE rac2
ora.net1.network
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.ons
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.registry.acfs
ONLINE ONLINE rac1
ONLINE ONLINE rac2
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rac2
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE rac1
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE rac1
ora.oc4j
1 OFFLINE OFFLINE
ora.qfundrac.db
1 OFFLINE OFFLINE
2 ONLINE ONLINE rac2 Open
ora.rac1.vip
1 ONLINE ONLINE rac1
ora.rac2.vip
1 ONLINE ONLINE rac2
ora.scan1.vip
1 ONLINE ONLINE rac2
ora.scan2.vip
1 ONLINE ONLINE rac1
ora.scan3.vip
1 ONLINE ONLINE rac1but for the below command it is showing both the nodes are up
SQL> select inst_id,status,instance_role,active_state from gv$instance;
INST_ID STATUS INSTANCE_ROLE ACTIVE_ST
1 OPEN PRIMARY_INSTANCE NORMAL
2 OPEN PRIMARY_INSTANCE NORMALhere is the output for cluvfy .
[grid@rac1 bin]$ ./cluvfy stage -post crsinst -n rac1,rac2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1"
Checking user equivalence...
Check: User equivalence for user "grid"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "grid"
Checking time zone consistency...
Time zone consistency check passed.
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
rac2 running
rac1 running
Oracle Cluster Synchronization Services appear to be online.
Cluster manager integrity check passed
UDev attributes check for OCR locations started...
Result: UDev attributes check passed for OCR locations
UDev attributes check for Voting Disk locations started...
Result: UDev attributes check passed for Voting Disk locations
Check default user file creation mask
Node Name Available Required Comment
rac2 0022 0022 passed
rac1 0022 0022 passed
Result: Default user file creation mask check passed
Checking cluster integrity...
Node Name
rac1
rac2
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ASM Running check passed. ASM is running on all cluster nodes
Checking OCR config file "/etc/oracle/ocr.loc"...
OCR config file "/etc/oracle/ocr.loc" check successful
Disk group for ocr location "+OCR_VOTE" available on all the nodes
Checking size of the OCR location "+OCR_VOTE" ...
Size check for OCR location "+OCR_VOTE" successful...
Size check for OCR location "+OCR_VOTE" successful...
WARNING:
This check does not verify the integrity of the OCR contents. Execute 'ocrcheck' as a privileged user to verify the contents of OCR.
OCR integrity check passed
Checking CRS integrity...
The Oracle clusterware is healthy on node "rac2"
The Oracle clusterware is healthy on node "rac1"
CRS integrity check passed
Checking node application existence...
Checking existence of VIP node application
Node Name Required Status Comment
rac2 yes online passed
rac1 yes online passed
Result: Check passed.
Checking existence of ONS node application
Node Name Required Status Comment
rac2 no online passed
rac1 no online passed
Result: Check passed.
Checking existence of GSD node application
Node Name Required Status Comment
rac2 no does not exist ignored
rac1 no does not exist ignored
Result: Check ignored.
Checking existence of EONS node application
Node Name Required Status Comment
rac2 no online passed
rac1 no online passed
Result: Check passed.
Checking existence of NETWORK node application
Node Name Required Status Comment
rac2 no online passed
rac1 no online passed
Result: Check passed.
Checking Single Client Access Name (SCAN)...
SCAN VIP name Node Running? ListenerName Port Running?
qfund-rac.qfund.net rac2 true LISTENER 1521 true
Checking name resolution setup for "qfund-rac.qfund.net"...
SCAN Name IP Address Status Comment
qfund-rac.qfund.net 192.168.8.118 passed
qfund-rac.qfund.net 192.168.8.119 passed
qfund-rac.qfund.net 192.168.8.117 passed
Verification of SCAN VIP and Listener setup passed
OCR detected on ASM. Running ACFS Integrity checks...
Starting check to see if ASM is running on all cluster nodes...
ASM Running check passed. ASM is running on all cluster nodes
Starting Disk Groups check to see if at least one Disk Group configured...
Disk Group Check passed. At least one Disk Group configured
Task ACFS Integrity check passed
Checking Oracle Cluster Voting Disk configuration...
Oracle Cluster Voting Disk configuration check passed
Checking to make sure user "grid" is not in "root" group
Node Name Status Comment
rac2 does not exist passed
rac1 does not exist passed
Result: User "grid" is not part of "root" group. Check passed
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
rac2 passed
rac1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 yes
rac1 yes
Result: Liveness check passed for "ntpd"
Checking NTP daemon command line for slewing option "-x"
Check: NTP daemon command line
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon slewing option check passed
Checking NTP daemon's boot time configuration, in file "/etc/sysconfig/ntpd", for slewing option "-x"
Check: NTP daemon's boot time configuration
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
NTP Time Server ".INIT." is common to all nodes on which the NTP daemon is running
NTP Time Server ".LOCL." is common to all nodes on which the NTP daemon is running
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Checking on nodes "[rac2, rac1]"...
Check: Clock time offset from NTP Time Server
Time Server: .INIT.
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
rac2 0.0 passed
rac1 0.0 passed
Time Server ".INIT." has time offsets that are within permissible limits for nodes "[rac2, rac1]".
Time Server: .LOCL.
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
rac2 -29.328 passed
rac1 -84.385 passed
Time Server ".LOCL." has time offsets that are within permissible limits for nodes "[rac2, rac1]".
Clock time offset check passed
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Post-check for cluster services setup was successful.
[grid@rac1 bin]$Please help me how to solve this problem.
Thanks & regards
Poorna Prasad.SHi All,
Now again i reboothed the database again manually and the database is no up on both the node.
Here is the output for few commands
[grid@rac1 bin]$ ./crs_stat -t
Name Type Target State Host
ora....DATA.dg ora....up.type OFFLINE OFFLINE
ora.ASM_FRA.dg ora....up.type OFFLINE OFFLINE
ora....ER.lsnr ora....er.type ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type ONLINE ONLINE rac1
ora....N2.lsnr ora....er.type ONLINE ONLINE rac2
ora....N3.lsnr ora....er.type ONLINE ONLINE rac2
ora....VOTE.dg ora....up.type ONLINE ONLINE rac1
ora.asm ora.asm.type ONLINE ONLINE rac1
ora.eons ora.eons.type ONLINE ONLINE rac1
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE rac1
ora....drac.db ora....se.type OFFLINE OFFLINE
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application OFFLINE OFFLINE
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application OFFLINE OFFLINE
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type ONLINE ONLINE rac2
ora....ry.acfs ora....fs.type ONLINE ONLINE rac1
ora.scan1.vip ora....ip.type ONLINE ONLINE rac1
ora.scan2.vip ora....ip.type ONLINE ONLINE rac2
ora.scan3.vip ora....ip.type ONLINE ONLINE rac2
[grid@rac1 bin]$ srvctl status nodeapps -n rac1,rac2
-bash: srvctl: command not found
[grid@rac1 bin]$ ./srvctl status nodeapps -n rac1,rac2
PRKO-2003 : Invalid command line option value: rac1,rac2
[grid@rac1 bin]$ ./srvctl status nodeapps -n rac1
-n <node_name> option has been deprecated.
VIP rac1-vip is enabled
VIP rac1-vip is running on node: rac1
Network is enabled
Network is running on node: rac1
GSD is disabled
GSD is not running on node: rac1
ONS is enabled
ONS daemon is running on node: rac1
eONS is enabled
eONS daemon is running on node: rac1
[grid@rac1 bin]$ ./srvctl status nodeapps -n rac2
-n <node_name> option has been deprecated.
VIP rac2-vip is enabled
VIP rac2-vip is running on node: rac2
Network is enabled
Network is running on node: rac2
GSD is disabled
GSD is not running on node: rac2
ONS is enabled
ONS daemon is running on node: rac2
eONS is enabled
eONS daemon is running on node: rac2Here is the output for crsctl stat res -t
[grid@rac1 bin]$ ./crsctl stat res -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.ASM_DATA.dg
OFFLINE OFFLINE rac1
OFFLINE OFFLINE rac2
ora.ASM_FRA.dg
OFFLINE OFFLINE rac1
OFFLINE OFFLINE rac2
ora.LISTENER.lsnr
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.OCR_VOTE.dg
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.asm
ONLINE ONLINE rac1 Started
ONLINE ONLINE rac2 Started
ora.eons
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.gsd
OFFLINE OFFLINE rac1
OFFLINE OFFLINE rac2
ora.net1.network
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.ons
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.registry.acfs
ONLINE ONLINE rac1
ONLINE ONLINE rac2
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rac1
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE rac2
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE rac2
ora.oc4j
1 OFFLINE OFFLINE
ora.qfundrac.db
1 OFFLINE OFFLINE
2 OFFLINE OFFLINE
ora.rac1.vip
1 ONLINE ONLINE rac1
ora.rac2.vip
1 ONLINE ONLINE rac2
ora.scan1.vip
1 ONLINE ONLINE rac1
ora.scan2.vip
1 ONLINE ONLINE rac2
ora.scan3.vip
1 ONLINE ONLINE rac2What is going wrong here .
Thanks & Regards,
Poorna Prasad.S
Edited by: SIDDABATHUNI on Apr 30, 2011 2:06 PM
Edited by: SIDDABATHUNI on Apr 30, 2011 2:10 PM -
I need to determine which version of windows os in on the computer running my application to make some minor adjustments to a subvi. Is there a programmatic way to determine this using Labview.
Or, use the Application property node Application>OS>Detailed Name. Although I can't say anything about its output on other-than-Windows OSes.
By the way, I think you win the "reviving old thread" award today
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer -
Autotune Plug-in Causes Node App to Crash
Has anyone noticed that you can't use the logic autotune plug-in while running distributed audio? The node application on the node machine crashes if you make any adjustments to the parameters in the autotune plug-in even though you may only be running the track that uses the plug-in on the host machine . . . NOT on the node machine. It's very strange. Moreover don't even think about running a track that uses autotune on the node machine because it's a sonic disaster. So basically you can't run distributed audio if you are using this plug-in. The apple tech guy was able to reproduce the issue on the phone with me but they have no solution for the bug as of yet. I am wondering if anyone else has experienced this and/or has a work-around.
Hello,
Welcome to Adobe Forums.
To disable the Contribute plugin from Microsoft Outlook 2013 you need to click on File menu then choose options from it.
FIle>Options>Add-Ins>
Then Click on Go button from Manage com Add-ins .
Highlight the Contribute plugin from the list and remove it .
Please see the screenshot as mentioned below.
Regards,
Rajeev. -
PCP with RAC simulation of node affinity in EBS 12.0.6
Hi ,
We are on 12.0.6 with sindle node database with PCP configured.
Migrating to 2 node RAC with 12.0.6 with PCP.
Architecture is
3 node application tier
2 node RAC DB.
all middlet tier services are enabled on the all 3 app nodes. concurrent managers are distrubuted across the 3 application nodes.
Is any way that we can cofigure the managers running on a particular node should always connect to specific RAC instance.
In 12.1.1 it is RAC affinity but in 12.0.6 how do we achvie it.
Please advice. Your help is highlt appreciate.
Thanks
Jana.also as mentioned by Srini, even Oracle as suggested the same method when I raise a SR,
From note: 1070621.1
What is being requested is called Request Instance Affinity or Node Affinity. This feature is available on EBS Release 12.1.1; see Note 566521.1 "Oracle Application Object Library Release Notes, Release 12.1.1" and Note 1129203.1 "How to run a concurrent program against a specific RAC instance with PCP/RAC setup?"
This feature is not available on earlier releases of EBS, however. As per a Concurrent Processing Developer the same effects can be simulated:
"If configured for RAC and the manager(s) connect to a specific instance ONLY (meaning not using _balance), then setup a manager to run on a particular node and connecting to a particular instance. That means, make certain the program runs on that manager only by inclusion / exclusion rules."
Thanks
Jana -
Hi i need help from the experts in node set up
i just both the logic pro upgrade from logic express and I have a g5 and g4 can somboody help my to use the node sistem to put them together. i am in mexico and is not easy to find that kind of help, i dont have a clear idea because the manual instructions are not clear enough how to install the node sistem, they send you to on line help... welll thank you verry much
kosmingThis is not strictly true... The G4 will work as a Node, though the benefit of it will be minimised.
It wirks pretty simply and you won't do any harm (especially your wallet), giving it a try.
Make sure you install the equivalent version (extremely important) of the Logic Node application on your G4 and run it.
Launch Logic on your G5, open preferences/ Audio / Nodes. Provided you have your computers networked correctly (I am assuming you have done this), the Node computer will be listed there. You can then activate it, if listed.
Assigning a track to a Node is done in the arrange window (view / Node buttons, needs to be enabled) .. Click the Node button and voila!!
It is important to note that only Logic plugins (with the exception of EXS24 and, I think, Ultrabeat) can be processed by a Node. -
Rac node failure crs cleanup failing
I have a three node rac database, 10.2.0.4 running on Windows server 2008. I lost a hard drive on one of the servers and it corrupted the mirror disk as well so I am having to rebuild. I am going through these procedures, RAC on Windows: How to Cleanup When A Node Has Been Disconnected or The OS Rebuilt (Doc ID 742737.1) and am running into a problem once I tried to delete the listener and then on to crs to delete the nodeapps for node3.
For the listener, I go into netca and the option to delete a listener is grayed out. When I run crs_stat I can still see the ora.node3.lsnr there. Does this mean that I just need to update tnsnames.ora or is there another place the information would be held? I hate to manually delete because I am afraid I won't get it cleaned out from everywhere. Any idea why that option would not be there?
My second issue is when I run this:
srvctl stop nodeapps -n node3 The nodeapps stop doesn't return any output and then when I try to remove nodeapps it gives me PRKO-2112: Some or all node applications are not removed successfully on node.
I have searched metalink for that error with no success as the document I found also says that you must stop nodeapps. I have already deleted the node from the db and asm and updated the appropriate inventory. I just need to finish the listener and crs and update the inventory for crs. Also, I noticed that the vip for the failed node was reassigned to node2 and I show that it has been released when i run cluvfy to check. Would crs give me errors on this if that was not the case?
I appreciate any help or guidance!Wanted to post a follow up in case any others are interested in the results...
I had tried to add the listener back to one of the remaining nodes .ora file and then delete but that didn't work. Also, remove nodeapps continued to throw an error that it could not stop the listener or vip for the failed node.
After a few days of reading I make a decision to just unregister the abandoned services from crs. I made sure to backup the OCRCONFIG before I ran crs_unregister and was able to successfully remove the listener and vip services from the failed node.
This eliminated my issue with netca, the node did not show up there anymore. I then went on to remove nodeapps and it failed saying it could not find the resource vip. I then ran olsnodes -n and used crssetup to remove the node entirely. Everything showed removed and I went and updated the crs inventory to finish.
All looks good and now I am working to rebuild and add the node back in. -
Vip not started in newly added node in 10gR2
Hi
I'm facing a issue while adding third node in 10gR2 env.
after pre-requisite check has been success, I run $CRS_HOME/oui/bin/addNode.sh script.
after GUI based installation , I run all the three script , which has been completed successfully,
Then I run vipca as root user to configure vip , but it thrown error ,CRS-1006, CRS 1028, crs-0215, crs-0223
I check status of OCR voting and their permission and status on node 3 , all looks good.
CRS-1006: No more member to consider CRS-0215: could not start resource 'ora.rac3.vip'
CRS-1028: dependency analysis failed because of CRS-0223 resource 'ora.rac1.gsd' has placement error.
CRS-1028: dependency analysis failed because of CRS-0223 resource 'ora.rac2.gsd' has placement error.
CRS-1028: dependency analysis failed because of CRS-0223 resource 'ora.rac1.ons' has placement error.
CRS-1028: dependency analysis failed because of CRS-0223 resource 'ora.rac2.ons' has placement error.
Can u please suggest.....
Regards
rajeev....[oracle@rac1 cluvfy]$ ./runcluvfy.sh stage -post crsinst -n rac1,rac2,rac3 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
rac3 yes
Result: Node reachability check passed from node "rac1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 passed
rac3 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
rac2 running
rac1 running
rac3 running
Result: Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Node Name
rac1
rac2
rac3
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
rac2 yes
rac1 yes
rac3 yes
Result: Liveness check passed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
rac2 yes
rac1 yes
rac3 yes
Result: Liveness check passed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
rac2 yes
rac1 yes
rac3 yes
Result: Liveness check passed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
rac2 yes yes yes
rac1 yes yes yes
rac3 yes yes yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
rac2 yes
rac1 yes
rac3 yes
Result: CRS health check passed.
CRS integrity check passed.
Checking node application existence...
Checking existence of VIP node application
Node Name Required Status Comment
rac2 yes exists passed
rac1 yes exists passed
rac3 yes exists passed
Result: Check passed.
Checking existence of ONS node application
Node Name Required Status Comment
rac2 no exists passed
rac1 no exists passed
rac3 no exists passed
Result: Check passed.
Checking existence of GSD node application
Node Name Required Status Comment
rac2 no exists passed
rac1 no exists passed
rac3 no exists passed
Result: Check passed.
Post-check for cluster services setup was successful. -
CCMS - Missing APPLICATION ERRORS
Hi Experts,
When i go to the CCMS monitoring RZ21 transaction under the node integration server i'm only able to see the node System Errors and the other node Application Errors is missing. I've done the GRMG configuartion and i can also view the XI Repository, XI directory heartbeats .
what should i do inorder for the application errors node to appear so that i can see each of the namespaces.
regards,
Rahul.Hi Rahul,
Apply SAP Note 936558 - SAP XI alert monitor: 'Application errors' subtree missing
Regards,
Prateek
Maybe you are looking for
-
Disable the "enter a password to unlock the disk" prompt
is there a way to disable the "enter a password to unlock the disk" prompt? My macbook has 2 logical drives, one of them is encrypted, and everytime I start the Mac os x it pops up with that prompt. Any help is appreciated!
-
Jumping of reports by using RRI
Hi Gurus Can anybody help me in getting the scenarions for RRI, when it is usefull on what scenarios wego for RRI
-
TS4268 iMessage and Facetime have a "Waiting for activation" message. What do I do?
Facetime and iMessage have a "Waiting for activation" error message in the setting section. Need help figuring out what to do.
-
Hi, I have 10 years of experience in construction industry.My area of expertise is in project management.I before 5 years I have a strong desire to work in IT industry. But not able to get a chance.But I need a career profile change to IT industry. S
-
Control Statment in PL/SQL Basic Loop
Hi, I have a PL/SQL procedure which contains a basic loop. Please refer the below sample code. In the following code, I just process each record. I would like to skip a record process if certain condition arrives. Right now My code it goes to excepti