Node is not processing

Hallo friends,
after years of using Logic I am trying to set up a Node. Without success
What works: a LAN connection between my two Macs. I used automatic configuration, under TCP/IP Configured IPv4 Using DHCP.
I can connect to the file server from / to each of my Macs. I can mount hard drives, share internet connections...
I installed Logic Node app on my MacBook and I used the Logic Node installer located in utilities folder on my dualG5 (I am trying to use MacBook as a node and Dual G5 as a Master computer).
I started the Node app on MacBook first, than launched Logic app on dualG5. Without opening new project I opened Preferences / Audio / Nodes. Now: I can see my MacBook available (not with grey letters). No box is checked (near "Enable Logic Nodes" or near "MacBook" under Node). So I check "Enable Logic Nodes". I can see *Initializing Core Audio* is working. Than I try to check the box near my MacBook node, but I can' t. The whole line turns into darker grey as soon as I select the checkbox,but nothing happens. when I try to select it another time, the popup window occurs and says:
*Logic Pro lost the connection to the Node "MacBook"*
Please relaunch Node application or check network connection
My network connection seems to work fine, I can log in, mount drives, share internet... The Node app seems to be or it' s icon looks like connected in MacBook dock (and it says "Connected to G5"). What I found out is, that if I try to Quit the Node app on MacBook either when Logic is running on G5 or after I quit Logic on G5, I am never able to quit Node app on my MacBook normally as it stops responding, when I try to quit it. I always have to Force Quit this Node app...
Now the second way I tried: started Node app on MacBook, launched Logic on dualG5. Opened Preferences / Audio / Nodes. Nothing is checked AND NOW I CHECKED the checkbox near the MacBook node FIRST. It can be done (remember nothing happened when I tried to check it after I checked "Enable Logic Nodes" checkbox). Than I checked "Enable Logic Nodes" , seems to be OK. The Node on MacBook says and looks like connected...
I opened a project and created approx. 10 audio tracks. I inserted Linear phase EQs, Logic compressors, Deessers, EQs to them. I also inserted whole lot of Waves SSL bundle to some tracks, but kept Logic native and Waves plugins separate. The system was pretty maxed out. Now the maximum I could get whenassign a track to a Node processing, was that the Track Node button showed green arrow, but did not light green. Whing according to manual is: Sync Pending and not Enabled/Active. I even could see some tracks Enabled/Inactive.
After spending last 24+ hours how to figure it out, I am asking for help.
Here are some answers I expect you might ask:
-yes, I have same versions of Logic and Node
-yes, I have Waves SSL bundle installed on my MacBook, same version as on DualG5
-yes, I tried it with native Logic plugins only
-yes, the Firewall is OFF on both machines (Preferences / Sharing)
- I unchecked all Ports except "Built in Ethernet" on dualG5 and "Airport" and "Built in Ethernet" on MacBook in Preferences / Network Port Configurations
-yes, I tried it with "Airport" unchecked also
-yes, I tried to reboot many times - both machines. I put Node app into login items on MacBook. I tried to shut both machines of, start MacBook first, make sure Node is "on", started dualG5, launched Logic...
-yes, I inserted so many plugins to so many tracks that may dualG5 gave me "System Overload" message everytime I tried to playback the project, but Node did not start to process...
-no, I am not networking genius
-yes, I tried different LAN cable (CAT5 always, one "crossed" or "cross-patched")
-I've got Parallels and WinXP installed on my MacBook, but they never run, when I tried Node setup (actually, I am almost never using them )
Any ideas appreciated, thank you.
Message was edited by: Diamond Dog

I'd start with something simple - one audio track, with one Logic plugin.
Can you get a solid green node light on that? if not, no point trying anything more complicated until you can get this fixed.
Note - I briefly tried it with my MBP and my old Powerbook as a node, and it worked fine without any particular headaches setting it up...

Similar Messages

Returning to a previous Node in the process.

Does anyone have a good pattern for returning to a previous node in the process?
I can't think of any way to do it that is not exceedingly cumbersome, especially
considering that I Want to be able to return to almost any node from any other
node.
To state in a slightly different way,how do I move "back" in the process.
Thanks, ken

I have read that you can loop back accept across AND/OR joins. Or is it
just OR? You can even loop back to the node itself; what else are you
looking for? Oh! Pattern, well just analyse and test again and again don't
break the joins rule (per above) and do have an exit :) in the loop. Also
there are other rules for parallel paths which need to be followed for your
own sanity (in case you have parallel paths as part of the loop).
Need more specifics to be any more helpful,
Raoon Kundi
214 566 7878
[email protected]
"Jared" <[email protected]> wrote in message
news:3f4cf869$[email protected]..
>
I have no idea if this works the way you want it to, but can you use an'Unmark
Task Done' action?
"Robert Varga" <[email protected]> wrote:
Put it in a loop which has its test condition at the end.
"Ken Clark" <[email protected]> wrote in message
news:3f4520b9$[email protected]..
Does anyone have a good pattern for returning to a previous node inthe
process?
I can't think of any way to do it that is not exceedingly cumbersome,especially
considering that I Want to be able to return to almost any node fromany
other
node.
To state in a slightly different way,how do I move "back" in the
process.
>>>
Thanks, ken

UCCX error-remote UCCX node is not reachable

Hi,
I am working in UCCX 9.0,trying to upload new script developed thorugh UCCX script editor ,whenever I click upload script through "script management" tab,giving error as "remote UCCX node is not reachable,it is not recommended to create,modify or delete the files in this state,as it will be inconsistent between nodes",let me know any idea about this error.
Thanks,
Baskar.

Hi,
RTMT is configured and found the following error.
2013-11-11 04:11:39 :INFO: Received request to start the service Cisco Unified CCX Engine
2013-11-11 04:11:39 :INFO: Checking if PID File exists.
2013-11-11 04:11:39 :INFO: process Cisco Unified CCX Engine is not running
2013-11-11 04:11:39 :INFO: Starting process Cisco Unified CCX Engine, Exe=/opt/cisco/uccx/bin/UCCX_Engine, Conf=/opt/cisco/uccx/conf/UCCX_EngineCfg.xml
2013-11-11 04:11:39 :INFO: Cisco Unified CCX Engine initialization complete.... PID 18469 updated in pid file /opt/cisco/uccx/conf/UCCX_Engine.pid
2014-06-05 05:45:46 :INFO: Received request to start the service Cisco Unified CCX Engine
2014-06-05 05:45:46 :INFO: Checking if PID File exists.
2014-06-05 05:45:47 :INFO: PID File exists, pid=18469
2014-06-05 05:45:47 :INFO: process Cisco Unified CCX Engine with PID 18469 might have crashed, PID file still exists
2014-06-05 05:45:47 :INFO: Stale PID entry 18469, removing PID file
2014-06-05 05:45:49 :INFO: Starting process Cisco Unified CCX Engine, Exe=/opt/cisco/uccx/bin/UCCX_Engine, Conf=/opt/cisco/uccx/conf/UCCX_EngineCfg.xml
2014-06-05 05:45:49 :INFO: Cisco Unified CCX Engine initialization complete.... PID 4201 updated in pid file /opt/cisco/uccx/conf/UCCX_Engine.pid
2014-06-05 07:04:03 :INFO: Received request to stop the service Cisco Unified CCX Engine
2014-06-05 07:04:03 :INFO: PID File exists, pid=4201
2014-06-05 07:04:03 :INFO: Stopping the Process Cisco Unified CCX Engine, pid=4201
2014-06-05 07:04:03 :INFO: Stopped the process Cisco Unified CCX Engine
2014-06-05 07:28:29 :INFO: Received request to start the service Cisco Unified CCX Engine
2014-06-05 07:28:29 :INFO: Checking if PID File exists.
2014-06-05 07:28:29 :INFO: process Cisco Unified CCX Engine is not running

11gR2 Cluster node does not start, start of ora.gipcd fails

Hi
I have a clusert node which just does not start, and i do know understand what the problem is.
Does anyone have an idea what the problem cound be?
I am using Oracle 11.2.0.1.0 on OEL.
I appreciate any help, thank you.
Regards Bernhard
NAME           TARGET STATE        SERVER                   STATE_DETAILS
Cluster Resources
ora.asm
      1        ONLINE OFFLINE
ora.crsd
      1        ONLINE INTERMEDIATE node001
ora.cssd
      1        ONLINE OFFLINE
ora.cssdmonitor
      1        ONLINE OFFLINE
ora.ctssd
      1        ONLINE OFFLINE
ora.diskmon
      1        ONLINE OFFLINE
ora.drivers.acfs
      1        ONLINE ONLINE       node001
ora.evmd
      1        ONLINE OFFLINE
ora.gipcd
      1        ONLINE OFFLINE
ora.gpnpd
      1        ONLINE OFFLINE
ora.mdnsd
      1        ONLINE ONLINE       node001                              alertnode001.log
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2012-06-29 08:43:52.511
[/opt/grid/product/11gR2/grid/bin/cssdmonitor(5144)]CRS-5822:Agent '/opt/grid/product/11gR2/grid/bin/cssdmonitor_root' disconnected from server. Details at (:CRSAGF00117:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdmonitor_root/oracssdmonitor_root.log.
2012-06-29 08:48:49.713
[ohasd(4346)]CRS-2112:The OLR service started on node node001.
2012-06-29 08:48:50.010
[ohasd(4346)]CRS-8017:location: /etc/oracle/lastgasp has 50 reboot advisory log files, 0 were announced and 0 errors occurred
2012-06-29 08:48:55.134
[ohasd(4346)]CRS-2772:Server 'node001' has been assigned to pool 'Free'.
[client(4634)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
[client(4652)]CRS-10001:ACFS-9322: done.
2012-06-29 08:50:59.362
[ohasd(4346)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.oracssdmonitor_root.log
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2012-06-29 08:48:51.003: [    AGFW][1810312288] Starting the agent: /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdmonitor_root/
2012-06-29 08:48:51.003: [   AGENT][1810312288] Agent framework initialized, Process Id = 4414
2012-06-29 08:48:51.003: [ USRTHRD][1810312288] to enter agent main
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_main: setting priority to 4
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] *** Agent Framework Started ***
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_vmondisv: Compatible vendor clusterware not in use
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_thrdspawn: spawn OMON succ
2012-06-29 08:48:54.939: [ USRTHRD][1810312288] clsncssd_main: spawn omon succ
2012-06-29 08:48:54.939: [ USRTHRD][1098914112] clsnomon_main: default values for omon, initrate 1000, pollrate 500.
2012-06-29 08:48:54.939: [ USRTHRD][1098914112] clsnomon_main: starting omon
2012-06-29 08:48:54.942: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
2012-06-29 08:48:54.942: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29
2012-06-29 08:48:55.041: [    AGFW][1810312288] SERVER IPC CONNECT STR: (ADDRESS=(PROTOCOL=IPC)(KEY=OHASD_IPC_SOCKET_11))
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] Inited lsf context 0x1ae1cdd0
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] Initing CLS Framework messaging
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] New Framework state: 2
2012-06-29 08:48:55.041: [CLSFRAME][1810312288] M2M is starting...
2012-06-29 08:48:55.047: [ CRSCOMM][1810312288] m_pClscCtx=0x1ae21d70m_pUgblm=0x1ae754b0
2012-06-29 08:48:55.047: [ CRSCOMM][1810312288] Starting send thread
2012-06-29 08:48:55.052: [ CRSCOMM][1119893824] clsIpc: sendWork thread started.
2012-06-29 08:48:55.057: [ CRSCOMM][1130383680] IPC Client thread started listening
2012-06-29 08:48:55.057: [ CRSCOMM][1130383680] init data sent from server
2012-06-29 08:48:55.057: [CLSFRAME][1810312288] New IPC Member:{Relative|Node:0|Process:0|Type:2}:OHASD:node001
2012-06-29 08:48:55.058: [CLSFRAME][1810312288] New process connected to us ID:{Relative|Node:0|Process:0|Type:2} Info:OHASD:node001
2012-06-29 08:48:55.066: [CLSFRAME][1810312288] Starting thread model named: MultiThread
2012-06-29 08:48:55.073: [CLSFRAME][1810312288] Starting thread model named: SingleThread
2012-06-29 08:48:55.076: [CLSFRAME][1810312288] Starting thread model named: SingleThreadT
2012-06-29 08:48:55.080: [CLSFRAME][1810312288] New Framework state: 3
2012-06-29 08:48:55.080: [    AGFW][1810312288] Agent Framework started successfully
2012-06-29 08:48:55.080: [    AGFW][1182832960] Agfw engine module has enabled...
2012-06-29 08:48:55.080: [CLSFRAME][1182832960] Module Enabling is complete
2012-06-29 08:48:55.080: [CLSFRAME][1182832960] New Framework state: 6
2012-06-29 08:48:55.080: [    AGFW][1182832960] Agent is started with userid: root , expected user: root
2012-06-29 08:48:55.081: [    AGFW][1182832960] Agent sending message to PE: AGENT_HANDSHAKE[Proxy] ID 20484:14
2012-06-29 08:48:55.088: [    AGFW][1182832960] Agent received the message: RESTYPE_ADD[ora.cssdmonitor.type] ID 8196:299
2012-06-29 08:48:55.089: [    AGFW][1182832960] Added new restype: ora.cssdmonitor.type
2012-06-29 08:48:55.089: [    AGFW][1182832960] Agent sending last reply for: RESTYPE_ADD[ora.cssdmonitor.type] ID 8196:299
2012-06-29 08:48:55.090: [    AGFW][1182832960] Agent received the message: RESOURCE_ADD[ora.cssdmonitor 1 1] ID 4356:301
2012-06-29 08:48:55.090: [    AGFW][1182832960] Added new resource: ora.cssdmonitor 1 1 to the agfw
2012-06-29 08:48:55.091: [    AGFW][1182832960] Agent sending last reply for: RESOURCE_ADD[ora.cssdmonitor 1 1] ID 4356:301
2012-06-29 08:48:55.091: [    AGFW][1182832960] Agent received the message: RESOURCE_PROBE[ora.cssdmonitor 1 1] ID 4097:302
2012-06-29 08:48:55.091: [    AGFW][1182832960] Preparing CHECK command for: ora.cssdmonitor 1 1
2012-06-29 08:48:55.096: [    AGFW][1172343104] Executing command: check for resource: ora.cssdmonitor 1 1
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr OMON_INITRATE, value 1000
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr OMON_POLLRATE, value 500
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr ORA_OPROCD_MODE, value
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr PROCD_TIMEOUT, value 1000
2012-06-29 08:48:55.096: [ora.cssdmonitor][1172343104] [check] clsncssd_getattr: attr LOGGING_LEVEL, value 1
2012-06-29 08:48:55.096: [    AGFW][1172343104] check for resource: ora.cssdmonitor 1 1 completed with status: OFFLINE
2012-06-29 08:48:55.096: [CRSTIMER][1203812672] Timer Thread Starting.
2012-06-29 08:48:55.096: [    AGFW][1182832960] ora.cssdmonitor 1 1 state changed from: UNKNOWN to: OFFLINE
2012-06-29 08:48:55.096: [    AGFW][1182832960] Agent sending last reply for: RESOURCE_PROBE[ora.cssdmonitor 1 1] ID 4097:302
2012-06-29 08:48:55.096: [    AGFW][1182832960] Agent has no resources to be monitored.Sending suicide request.
2012-06-29 08:48:55.096: [    AGFW][1182832960] Agent sending message to PE: AGENT_SUICIDE[Proxy] ID 20486:28
2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent received the message: RESOURCE_DELETE[ora.cssdmonitor 1 1] ID 4358:317
2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent sending last reply for: RESOURCE_DELETE[ora.cssdmonitor 1 1] ID 4358:317
2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent has no resources to be monitored.Sending suicide request.
2012-06-29 08:48:55.100: [    AGFW][1182832960] Agent sending message to PE: AGENT_SUICIDE[Proxy] ID 20486:34
2012-06-29 08:48:55.101: [    AGFW][1182832960] ora.cssdmonitor 1 1 marked as deleted.
2012-06-29 08:48:55.101: [    AGFW][1182832960] Deleting the resource: ora.cssdmonitor 1 1
2012-06-29 08:48:55.101: [    AGFW][1182832960] Agent is commiting suicide.
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_exit: CSSD Agent was asked to exit with exit code 1
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_becomeactive: Signaling active state
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_term: still threads up (1)
2012-06-29 08:48:55.101: [ USRTHRD][1182832960] clsncssd_exit: Agent is done.
2012-06-29 08:48:55.101: [    AGFW][1182832960] Agent is exiting with exit code: 1
2012-06-29 08:48:55.947: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
2012-06-29 08:48:55.947: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29
2012-06-29 08:48:56.952: [ CSSCLNT][1098914112]clssscConnect: gipc request failed with 29 (0x16)
2012-06-29 08:48:56.952: [ CSSCLNT][1098914112]clsssInitNative: connect failed, rc 29Edited by: Bernhard W on 03-Jul-2012 02:14

I am really getting desperate about this.
The ASM persmissions are on both nodes the same, so this should not be the problem and i can not find any problem on the network.
The log files of the healthy node do not say anything about the node which does not startup now, the last log entry was from 6 months ago, when i shut that node down. There seems to be no communication between the two nodes now.
I tried to manually start the ora.cssd but somehow ora.gipcd just does not start and i can not find the problem.
[oracle@dmrs11srvcla001 ~]$ crsctl stat res -t -init
NAME           TARGET STATE        SERVER                   STATE_DETAILS
Cluster Resources
ora.asm
      1        ONLINE OFFLINE
ora.crsd
      1        ONLINE INTERMEDIATE dmrs11srvcla001
ora.cssd
      1        ONLINE OFFLINE
ora.cssdmonitor
      1        ONLINE ONLINE       dmrs11srvcla001
ora.ctssd
      1        ONLINE OFFLINE
ora.diskmon
      1        OFFLINE OFFLINE
ora.drivers.acfs
      1        ONLINE ONLINE       dmrs11srvcla001
ora.evmd
      1        ONLINE OFFLINE
ora.gipcd
      1        ONLINE OFFLINE
ora.gpnpd
      1        ONLINE OFFLINE
ora.mdnsd
      1        ONLINE ONLINE       dmrs11srvcla001
[oracle@dmrs11srvcla001 ~]$ crsctl start res ora.cssd -init
CRS-2672: Attempting to start 'ora.gipcd' on 'dmrs11srvcla001'
Start action for daemon aborted
CRS-2674: Start of 'ora.gipcd' on 'dmrs11srvcla001' failed
CRS-2679: Attempting to clean 'ora.gipcd' on 'dmrs11srvcla001'
CRS-2681: Clean of 'ora.gipcd' on 'dmrs11srvcla001' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'dmrs11srvcla001'
Start action for daemon aborted
CRS-2674: Start of 'ora.gpnpd' on 'dmrs11srvcla001' failed
CRS-2679: Attempting to clean 'ora.gpnpd' on 'dmrs11srvcla001'
CRS-2681: Clean of 'ora.gpnpd' on 'dmrs11srvcla001' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'dmrs11srvcla001'
CRS-2672: Attempting to start 'ora.diskmon' on 'dmrs11srvcla001'
CRS-2676: Start of 'ora.diskmon' on 'dmrs11srvcla001' succeededalertnode001.log
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:11:40.789
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:11:41.654
[ohasd(4351)]CRS-2765:Resource 'ora.mdnsd' has failed on server 'node001'.
2012-07-02 17:11:43.404
[cssd(4997)]CRS-1713:CSSD daemon is started in clustered mode
2012-07-02 17:11:46.634
[cssd(4997)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-07-02 17:11:46.745
[ohasd(4351)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'node001'.
2012-07-02 17:12:42.384
[/opt/grid/product/11gR2/grid/bin/orarootagent.bin(4488)]CRS-5818:Aborted command 'start for resource: ora.diskmon 1 1' for resource 'ora.diskmon'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/orarootagent_root/orarootagent_root.log.
2012-07-02 17:12:46.390
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.diskmon'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:14:50.768
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:16:55.819
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:16:58.354
[cssd(5137)]CRS-1713:CSSD daemon is started in clustered mode
2012-07-02 17:16:58.425
[cssd(5137)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-07-02 17:25:23.194
[ohasd(4351)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node001'.
2012-07-02 17:25:23.200
[ohasd(4351)]CRS-2767:Target resource 'ora.diskmon' is offline, will not recover.
2012-07-02 17:26:57.384
[/opt/grid/product/11gR2/grid/bin/cssdagent(5116)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
2012-07-02 17:27:02.514
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cssd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-02 17:37:11.971
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.evmd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 02:13:57.821
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 05:14:37.915
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 05:44:44.630
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 06:14:51.303
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 06:44:57.981
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 07:15:04.655
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 07:42:45.015
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gipcd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-03 07:44:50.068
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.gpnpd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.
2012-07-03 07:44:52.369
[cssd(10209)]CRS-1713:CSSD daemon is started in clustered mode
2012-07-03 07:44:52.434
[cssd(10209)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-07-03 07:45:11.331
[ohasd(4351)]CRS-2765:Resource 'ora.crsd' has failed on server 'node001'.
2012-07-03 07:53:17.222
[ohasd(4351)]CRS-2765:Resource 'ora.diskmon' has failed on server 'node001'.
2012-07-03 07:53:17.222
[ohasd(4351)]CRS-2767:Target resource 'ora.diskmon' is offline, will not recover.
2012-07-03 07:54:51.401
[/opt/grid/product/11gR2/grid/bin/cssdagent(10188)]CRS-5818:Aborted command 'start for resource: ora.cssd 1 1' for resource 'ora.cssd'. Details at (:CRSAGF00113:) in /opt/grid/product/11gR2/grid/log/node001/agent/ohasd/oracssdagent_root/oracssdagent_root.log.
2012-07-03 07:54:56.524
[ohasd(4351)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cssd'. Details at (:CRSPE00111:) in /opt/grid/product/11gR2/grid/log/node001/ohasd/ohasd.log.ohasd.log
2012-07-03 07:45:11.330: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_STATUS[Proxy] ID 20481:24919
2012-07-03 07:45:11.330: [    AGFW][1347250496] Received state change for ora.crsd 1 1 [old state = PARTIAL, new state = OFFLINE]
2012-07-03 07:45:11.330: [    AGFW][1347250496] Agfw Proxy Server sending message to PE, Contents = [MIDTo:2|OpID:3|FromA:{Invalid|Node:0|Process:0|Type:0}|ToA:{Invalid|Node:-1|Process:-1|Type:-1}|MIDFrom:0|Type:4|Pri2|Id:23258]
2012-07-03 07:45:11.330: [    AGFW][1347250496] Agfw Proxy Server replying to the message: RESOURCE_STATUS[Proxy] ID 20481:24919
2012-07-03 07:45:11.330: [   CRSPE][1357756736] State change received from node001 for ora.crsd 1 1
2012-07-03 07:45:11.331: [   CRSPE][1357756736] Processing PE command id=139. Description: [Resource State Change (ora.crsd 1 1) : 0x1c284d40]
2012-07-03 07:45:11.331: [   CRSPE][1357756736] RI [ora.crsd 1 1] new external state [OFFLINE] old value: [INTERMEDIATE] on node001 label = []
2012-07-03 07:45:11.331: [   CRSPE][1357756736] Resource Resource Instance ID[ora.crsd 1 1]. Values:
STATE=OFFLINE
TARGET=ONLINE
LAST_SERVER=node001
CURRENT_RCOUNT=1
LAST_RESTART=1341292505
FAILURE_COUNT=0
FAILURE_HISTORY=
STATE_DETAILS=
INCARNATION=29
STATE_CHANGE_VERS=29
LAST_FAULT=1341292504
DEGREE_ID=1
ID=ora.crsd 1 1
CARDINALITY_ID=1
Lock Info:
Write Locks:none
ReadLocks:|STATE INITED||INITIAL CHECK DONE| has failed!
2012-07-03 07:45:11.331: [   CRSPE][1357756736] Processing unplanned state change for [ora.crsd 1 1]
2012-07-03 07:45:11.331: [   CRSPE][1357756736] ora.crsd 1 1: uptime exceeds uptime threshold , resetting restart count
2012-07-03 07:45:11.331: [   CRSPE][1357756736] Local Recovery picked for [ora.crsd 1 1]
2012-07-03 07:45:11.333: [   CRSPE][1357756736] Sending message to agfw: id = 23260
2012-07-03 07:45:11.333: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23260
2012-07-03 07:45:11.333: [   CRSPE][1357756736] CRS-2672: Attempting to start 'ora.crsd' on 'node001'
2012-07-03 07:45:11.333: [    AGFW][1347250496] Agfw Proxy Server forwarding the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23260 to the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
2012-07-03 07:45:12.349: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23261 from the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
2012-07-03 07:45:12.350: [    AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_START[ora.crsd 1 1] ID 4098:23260
2012-07-03 07:45:12.350: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23260
2012-07-03 07:45:12.350: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.crsd 1 1] ID 4098:23261 from the agent /opt/grid/product/11gR2/grid/bin/orarootagent_root
2012-07-03 07:45:12.350: [    AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_START[ora.crsd 1 1] ID 4098:23260
2012-07-03 07:45:12.350: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23260
2012-07-03 07:45:12.351: [   CRSPE][1357756736] RI [ora.crsd 1 1] new external state [INTERMEDIATE] old value: [OFFLINE] on node001 label = []
2012-07-03 07:45:12.351: [   CRSPE][1357756736] CRS-2676: Start of 'ora.crsd' on 'node001' succeeded
2012-07-03 07:45:12.351: [   CRSPE][1357756736] PE Command [ Resource State Change (ora.crsd 1 1) : 0x1c284d40 ] has completed
2012-07-03 07:45:12.351: [    AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23269
2012-07-03 07:45:12.351: [    AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23269
2012-07-03 07:45:12.351: [    AGFW][1347250496] Agfw received reply from PE for resource state change for ora.crsd 1 1
2012-07-03 07:53:17.220: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_STATUS[Proxy] ID 20481:25353
2012-07-03 07:53:17.221: [    AGFW][1347250496] Received state change for ora.diskmon 1 1 [old state = ONLINE, new state = PLANNED_OFFLINE]
2012-07-03 07:53:17.221: [    AGFW][1347250496] Agfw Proxy Server sending message to PE, Contents = [MIDTo:2|OpID:3|FromA:{Invalid|Node:0|Process:0|Type:0}|ToA:{Invalid|Node:-1|Process:-1|Type:-1}|MIDFrom:0|Type:4|Pri2|Id:23497]
2012-07-03 07:53:17.221: [    AGFW][1347250496] Agfw Proxy Server replying to the message: RESOURCE_STATUS[Proxy] ID 20481:25353
2012-07-03 07:53:17.221: [   CRSPE][1357756736] State change received from node001 for ora.diskmon 1 1
2012-07-03 07:53:17.221: [   CRSPE][1357756736] Processing PE command id=140. Description: [Resource State Change (ora.diskmon 1 1) : 0x2aaab00318a0]
2012-07-03 07:53:17.221: [   CRSPE][1357756736] RI [ora.diskmon 1 1] new external state [OFFLINE] old value: [ONLINE] on node001 label = []
2012-07-03 07:53:17.221: [   CRSPE][1357756736] RI [ora.diskmon 1 1] new target state: [OFFLINE] old value: [ONLINE]
2012-07-03 07:53:17.222: [ CRSOCR][1351452992] Multi Write Batch processing...
2012-07-03 07:53:17.222: [   CRSPE][1357756736] Resource Resource Instance ID[ora.diskmon 1 1]. Values:
STATE=OFFLINE
TARGET=OFFLINE
LAST_SERVER=node001
CURRENT_RCOUNT=0
LAST_RESTART=1341294297
FAILURE_COUNT=0
FAILURE_HISTORY=
STATE_DETAILS=
INCARNATION=2
STATE_CHANGE_VERS=5
LAST_FAULT=1341242723
DEGREE_ID=1
ID=ora.diskmon 1 1
CARDINALITY_ID=1
Lock Info:
Write Locks:START of [ora.cssd 1 1] on [node001] : 0x2aaab000ba10
ReadLocks:|STATE INITED| has failed!
2012-07-03 07:53:17.222: [   CRSPE][1357756736] Processing unplanned state change for [ora.diskmon 1 1]
2012-07-03 07:53:17.222: [   CRSPE][1357756736] Target is not ONLINE, not recovering [ora.diskmon 1 1]
2012-07-03 07:53:17.222: [   CRSPE][1357756736] PE Command [ Resource State Change (ora.diskmon 1 1) : 0x2aaab00318a0 ] has completed
2012-07-03 07:53:17.222: [    AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23501
2012-07-03 07:53:17.222: [    AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23501
2012-07-03 07:53:17.223: [    AGFW][1347250496] Agfw received reply from PE for resource state change for ora.diskmon 1 1
2012-07-03 07:53:17.223: [ CRSOCR][1351452992] Multi Write Batch done.
2012-07-03 07:54:56.523: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.cssd 1 1] ID 4098:23242 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:54:56.523: [    AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_START[ora.cssd 1 1] ID 4098:23220
2012-07-03 07:54:56.524: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23220
2012-07-03 07:54:56.524: [    AGFW][1347250496] Received the reply to the message: RESOURCE_START[ora.cssd 1 1] ID 4098:23242 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:54:56.524: [   CRSPE][1357756736]Created alert : (:CRSPE00111:) : Start action timed out!
2012-07-03 07:54:56.524: [   CRSPE][1357756736] Start action failed with error code: 3
2012-07-03 07:54:56.524: [    AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_START[ora.cssd 1 1] ID 4098:23220
2012-07-03 07:54:56.524: [   CRSPE][1357756736] Received reply to action [Start] message ID: 23220
2012-07-03 07:54:56.524: [    AGFW][1347250496] Agfw Proxy Server received the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:54:56.524: [    AGFW][1347250496] Suicide request received from /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:54:56.524: [    AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:54:56.524: [   CRSPE][1357756736] CRS-2674: Start of 'ora.cssd' on 'node001' failed
2012-07-03 07:54:56.525: [UiServer][1361959232] Container [ Name: ORDER
     MESSAGE:
     TextMessage[CRS-2674: Start of 'ora.cssd' on 'node001' failed]
     MSGTYPE:
     TextMessage[1]
     OBJID:
     TextMessage[ora.cssd]
     WAIT:
     TextMessage[0]
2012-07-03 07:54:56.525: [   CRSPE][1357756736] Sending message to agfw: id = 23555
2012-07-03 07:54:56.525: [   CRSPE][1357756736] CRS-2679: Attempting to clean 'ora.cssd' on 'node001'
2012-07-03 07:54:56.525: [    AGFW][1347250496] Agfw Proxy Server received the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
2012-07-03 07:54:56.525: [    AGFW][1347250496] Agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id root is being stopped. Will be restarted when agent stops completly
2012-07-03 07:54:56.525: [    AGFW][1347250496] Could not forward message [RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555] to agent. /opt/grid/product/11gR2/grid/bin/cssdagent_root is not running
2012-07-03 07:54:56.525: [    AGFW][1347250496] Can not start Agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id root is waiting to be restarted.
2012-07-03 07:54:56.525: [UiServer][1361959232] Container [ Name: ORDER
     MESSAGE:
     TextMessage[CRS-2679: Attempting to clean 'ora.cssd' on 'node001']
     MSGTYPE:
     TextMessage[3]
     OBJID:
     TextMessage[ora.cssd]
     WAIT:
     TextMessage[0]
2012-07-03 07:55:01.627: [ CRSCOMM][1340946752][FFAIL] Couldnt clscreceive message, no message: 11
2012-07-03 07:55:01.627: [ CRSCOMM][1340946752] Client disconnected.
2012-07-03 07:55:01.627: [ CRSCOMM][1340946752][FFAIL] Listener got clsc error 11 for memNum. 14
2012-07-03 07:55:01.628: [ CRSCOMM][1340946752] IPC listener connection to member 14 has been removed
2012-07-03 07:55:01.628: [CLSFRAME][1340946752] Removing IPC Member:{Relative|Node:0|Process:14|Type:3}
2012-07-03 07:55:01.628: [CLSFRAME][1340946752] Disconnected from AGENT process: {Relative|Node:0|Process:14|Type:3}
2012-07-03 07:55:01.628: [   CRSPE][1357756736] Disconnected from server:
2012-07-03 07:55:01.628: [    AGFW][1347250496] Agfw Proxy Server received process disconnected notification, count=1
2012-07-03 07:55:01.628: [    AGFW][1347250496] /opt/grid/product/11gR2/grid/bin/cssdagent_root disconnected.
2012-07-03 07:55:01.628: [    AGFW][1347250496] Restarting the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.628: [    AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root[10188] stopped!
2012-07-03 07:55:01.628: [ CRSCOMM][1347250496] removeConnection: Member 14 does not exist.
2012-07-03 07:55:01.628: [    AGFW][1347250496] Starting the agent: /opt/grid/product/11gR2/grid/bin/cssdagent with user id: root and incarnation:7
2012-07-03 07:55:01.632: [    AGFW][1347250496] Starting the HB [Interval = 30000, misscount = 10kill allowed=0] for agent: /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.819: [CLSFRAME][1340946752] New IPC Member:{Relative|Node:0|Process:15|Type:3}:AGENT
2012-07-03 07:55:01.819: [CLSFRAME][1340946752] New process connected to us ID:{Relative|Node:0|Process:15|Type:3} Info:AGENT
2012-07-03 07:55:01.837: [    AGFW][1347250496] Agfw Proxy Server received the message: AGENT_HANDSHAKE[Proxy] ID 20484:14
2012-07-03 07:55:01.837: [    AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root with pid:10530 connected to server.
2012-07-03 07:55:01.837: [    AGFW][1347250496] Agfw Proxy Server sending message: RESTYPE_ADD[ora.cssd.type] ID 8196:23591 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.838: [    AGFW][1347250496] Agfw Proxy Server sending message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:23593 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.838: [    AGFW][1347250496] Agfw Proxy Server forwarding the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555 to the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.839: [    AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_HANDSHAKE[Proxy] ID 20484:14
2012-07-03 07:55:01.851: [    AGFW][1347250496] Received the reply to the message: RESTYPE_ADD[ora.cssd.type] ID 8196:23591 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.854: [    AGFW][1347250496] Received the reply to the message: RESOURCE_ADD[ora.cssd 1 1] ID 4356:23593 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.861: [    AGFW][1347250496] Received the reply to the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23594 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.862: [    AGFW][1347250496] Agfw Proxy Server sending the reply to PE for message:RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
2012-07-03 07:55:01.862: [    AGFW][1347250496] Received the reply to the message: RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23594 from the agent /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.862: [   CRSPE][1357756736] Received reply to action [Clean] message ID: 23555
2012-07-03 07:55:01.862: [    AGFW][1347250496] Agfw Proxy Server sending the last reply to PE for message:RESOURCE_CLEAN[ora.cssd 1 1] ID 4100:23555
2012-07-03 07:55:01.863: [    AGFW][1347250496] Agfw Proxy Server received the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:55:01.863: [   CRSPE][1357756736] Received reply to action [Clean] message ID: 23555
2012-07-03 07:55:01.863: [    AGFW][1347250496] Suicide request received from /opt/grid/product/11gR2/grid/bin/cssdagent_root
2012-07-03 07:55:01.863: [    AGFW][1347250496] Agfw Proxy Server replying to the message: AGENT_SUICIDE[Proxy] ID 20486:34
2012-07-03 07:55:01.863: [   CRSPE][1357756736] CRS-2681: Clean of 'ora.cssd' on 'node001' succeeded
2012-07-03 07:55:01.863: [   CRSPE][1357756736] Sequencer for [ora.cssd 1 1] has completed with error: CRS-0215: Could not start resource 'ora.cssd'.
2012-07-03 07:55:01.863: [UiServer][1361959232] Container [ Name: ORDER
     MESSAGE:
     TextMessage[CRS-2681: Clean of 'ora.cssd' on 'node001' succeeded]
     MSGTYPE:
     TextMessage[3]
     OBJID:
     TextMessage[ora.cssd]
     WAIT:
     TextMessage[0]
2012-07-03 07:55:01.864: [   CRSPE][1357756736] PE Command [ Start Resource : 0x2aaab0009d00 ] has completed
2012-07-03 07:55:01.864: [    AGFW][1347250496] Agfw Proxy Server received the message: CMD_COMPLETED[Proxy] ID 20482:23606
2012-07-03 07:55:01.864: [   CRSPE][1357756736] UI Command [Start Resource : 0x2aaab0009d00] is replying to sender.
2012-07-03 07:55:01.864: [    AGFW][1347250496] Agfw Proxy Server replying to the message: CMD_COMPLETED[Proxy] ID 20482:23606
2012-07-03 07:55:01.864: [UiServer][1361959232] Container [ Name: UI_DATA
     ora.cssd:
     TextMessage[215]
2012-07-03 07:55:01.864: [UiServer][1361959232] Done for ctx=0x2aaab004ece0
2012-07-03 07:55:01.869: [UiServer][1364060480] Closed: remote end failed/disc.
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752][FFAIL] Couldnt clscreceive message, no message: 11
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752] Client disconnected.
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752][FFAIL] Listener got clsc error 11 for memNum. 15
2012-07-03 07:55:03.791: [ CRSCOMM][1340946752] IPC listener connection to member 15 has been removed
2012-07-03 07:55:03.791: [CLSFRAME][1340946752] Removing IPC Member:{Relative|Node:0|Process:15|Type:3}
2012-07-03 07:55:03.791: [CLSFRAME][1340946752] Disconnected from AGENT process: {Relative|Node:0|Process:15|Type:3}
2012-07-03 07:55:03.792: [   CRSPE][1357756736] Disconnected from server:
2012-07-03 07:55:03.792: [    AGFW][1347250496] Agfw Proxy Server received process disconnected notification, count=1
2012-07-03 07:55:03.792: [    AGFW][1347250496] /opt/grid/product/11gR2/grid/bin/cssdagent_root disconnected.
2012-07-03 07:55:03.792: [    AGFW][1347250496] Agent /opt/grid/product/11gR2/grid/bin/cssdagent_root[10530] stopped!
2012-07-03 07:55:03.792: [ CRSCOMM][1347250496] removeConnection: Member 15 does not exist.

JDBC Sender channel not processing the messages

Hello,
From yesterday onwards JDBC Sender channel not processing the messages. In CC monitoring it is showing in Green Led and status is functioning. Cahnnel is polling for messages to DB server as per polling interval. But it is not processing the msg's. Under Processing detials for cluster node it is showing only "Processing Started" for each polling interval.
I have done the check in DB server by executing the query in the channel, whether there are any records are exisitng or not. There are 1000+ records.
Previously the parameter "Disconnect from DB after processing each message" was not set. I have set the parameter and activated in Productiion. Still the messages are not processing by channel
What was the problem? How to rectify with this.
Cheers
Veera

Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)

Error:The node does not contain any elements

Hi Experts,
I am getting this error.
The following error text was processed in the system SR6 : The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
The error occurred on the application server server6_SR6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
      Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
      Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
      Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
      Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
      Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
      Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
      Method: INIT of program CL_WDR_CONTROLLER=============CP
      Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
      Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
What is the problem here?
Thank you.
Lalitha.

(Assuming you have created elements for node...)
Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
u2022        1u20261          Only one element is instantiated.
u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
u2022        0u2026n          The number of instantiated elements of the context node can vary.
The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
Thanks,
Swanand.

Cluster node does not shutdown after "received shutdown"

Hi,
We put together an automated restart process that restarts cluster nodes across multiple servers. To shutdown a node, we use the Coherence MBeanConnector and invoke stop on object: name=Management,nodeId=<member id>. This works for most cases where member's log output shows "received shutdown", partition transfer messages and after the last primary partitions have been transferred the VM exits.
For one node however, the VM did not exit. From looking at the log file for this particular node, the primary partitions were transferred, the distributedCache thread stops showing output, but the Cluster thread continues to show activity.
Note that this node was the last VM to stop on the given server.
Has anyone seen this before or ideas on why this particular node did not exit after receiving the shutdown message?
Thanks!
Marcel.

Hi Marcel -
Please take a thread dump (via "kill -3" or "ctrl-break") on the VM that does not stop correctly. Coherence does not shut the VM down; it simply shuts itself down. If a non-daemon thread is running on the VM, then it may not exit. However, we won't know that until we see the thread dump.
Peace,
Cameron Purdy | Oracle Coherence

The text which is in text node is not displaying in output in smartforms

Hi,
In smartforms i created a text node and entered some text like following.
     Target Quantity               60000001     60000002
     Scheduled Quantity               60000003     60000004
     So far delivered Quantity          60000005     60000006
     Last delivered Quantity          60000007     60000008
      Delivery Schedule Details
the text which i entered as above in the text node is not displaying.It is in main area.

Hi
if u are using table or template inside the main window
then just mention the position of the text element
goto text element - output options- output structure tab----give line and column no.
Thanks
krushna

Just checking on another odd feature: Typedef enum Property Node "Value" not reflecting changes in the Typedef?

Just encountered this odd behavior in LV 2011 which I reduced to the following example:
- create a new VI and drop an enum control on te FP.
- make this control a typedef and open the corresponding typedef
- create a "case 1" item and a "case 2" item
- save the typedef (I used the name Typedef Control 1) and CLOSE it (this is to allow updating of the original control).
- drop a case structure on the diagram and connect the enum to it:
So far so good. Now create a "Value" Property node for the enum and use it instead of the terminal:
If I now go back to the typedef and add a "case 3" item, save the typedef and close it, the control is updated, but the Property node is not.
How do I know that? For one, the Case Structure contextual menu does not offer to create a case for every value. Also, if I add a "case 3" case manually, it turns red.
Luckily, the magic Ctrl-R key stroke actually does solve this problem.
Tested in LV 2011.

By Ctrl-R trick do you simply mean running the VI? That is one way to force a recompile, but if you hold down Ctrl while pressing the run button you can recompile without running. This should not be "dangerous" in any situation.
As you have drawn your example, I see no reason not to use a local in that situation (ok, maybe for vanity). Still, I view the behavior you describe as a bug, and it should certainly be fixed for the benefit of local haters out there. You have to be a little careful where you draw the line between what gets handled in real time and what gets handled only at compile time.

Job getting cancelled for 'Chain not processed for date-2007031920070318' ?

Hi All,
We have 2 process chains running only on weekdays - one for sales and the other for billing. A cancelled job is created for one of the process chains with the job log message as 'Chain not processed for date-2007031920070318' for the not run days whereas the other does not have any issues though the same monitor job program runs for both. The difference is only in the variant but nothing much other than that its maintained for 2 different chains.
   We also debugged the monitor job program. It basically does nothing other than displaying messages depending on the status of the chain log.
Please let me know your suggestions as to why it happens.
Thanks,
krishna

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

OPP(Output Post Processor) not processing the report (XML Publisher)

Hi,
I have defined a concurrent program (XML Publisher report) then ran but failed with the errors below. I am running the report in Oracle E-Business Suite 11.5.10.2, thru a concurrent manager other than Standard Manager. My guess is that OPP(Output Post Processor) is not processing the request outputs coming from a different manager/work shift since requests ran thru Standard Managers are all OK.
In the OAM(Oracle Applications Manager)-> OPP, there is only 1 process allocated for both Actual and Target. If we increase the number of processes, will it work?
/home/app/oracle/prodcomn/temp/pasta19356_0.tmp:
/home/app/oracle/prodcomn/temp/pasta19356_1.tmp: No such file or directory
Pasta: Error: Print failed. Command=lp -c -dkonica4 /home/app/oracle/prodcomn/temp/pasta19356_1.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
Anybody who has experienced similar issue?
Thanks in advance.
Rownald

Hello,
Just an additional tests info. We have 2 concurrent managers which I think is affecting the XML report output - Standard Manager(running 24 hours) and a Warehouse manager (9am-4:15pm).
When I run the report before or after the Warehouse manager workshift(9am-4:15pm), the output is fine - which means PDF is generated and Pasta printing is OK. However, when report is run between 9am-4:15pm, the report only shows XML output with an error in Pasta printing(above). I also found that re-opening the output(ran prior to Warehouse workshift) on the period between 9am-4:15pm would also result to just an XML output instead of the previous PDF.
Anybody who has experienced similar issue like this? Any idea? The report is not directly defined as "inclusion" in the Warehouse manager, only the program calling it. Any effect of multiple concurrent managers in the XML Publisher output?
Thanks in advance for your ideas..

HT5631 how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi Experts,
We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
Can anyone let me know how to fix the issue or what needs to be done?
Your help is highly appreciated.
Regards
Faisal

Hi,
It seems to be problem with permission of files. Please ask your basis to do following:
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards
Aashish Sinha

Regarding Rough FISCAL YEAR VARIANT NOT PROCESSED

Hi Experts,
I am loading data from 2lis_03_um to 0IC_C03,While executing DTP i am getting error as Rogh FISCAL YEAR VARIANT NOT PROCESSED.
Can anyone please suggest me how to resolve the issue.
Thanks
Laxman

Hi,
Use the settings here:
transaction code SPRO
SAP Netweaver
Business Intelligence
Settings for BI content
Trande Industries
Retailing
=> set fiscal year variant
regards,
pascal

Bill and Routing Interface concurrent program is not processing component

Hi All,
While running Bill and Routing Interface concurrent program,not processing the component item(Line Item) from bom_inventory_comps_interface,still it show process flag as 1. where as billing item(Header Item) is successfully done..i have tried with all the option by giving component sequence id and batch id still it is not processing component item..
Is it recommendable to give bill sequence id and component sequence id in interface table using bom_inventory_component_s sequence..
I will be very pleased if i listen from u guys... Plz help me in resolving this issue..
My Header Insert Stmt..
INSERT INTO apps.bom_bill_of_mtls_interface@system_link_visma
(assembly_item_id, organization_id,
alternate_bom_designator, last_update_date,
last_updated_by, creation_date, created_by,
revision, item_number, item_description,
implementation_date, transaction_type,
process_flag, assembly_type, batch_id
VALUES (l_inv_item_id, l_org_id,
NULL, SYSDATE,
1318, SYSDATE, 1318,
l_revision, l_item_num, l_description,
SYSDATE, 'CREATE',
1, 1, 10003535
Component Insert stmt
INSERT INTO apps.bom_inventory_comps_interface@system_link_visma
(operation_seq_num, component_item_id,
item_num, basis_type, component_quantity,
auto_request_material, effectivity_date,
disable_date, planning_factor,
component_yield_factor,
enforce_int_requirements,
include_in_cost_rollup, wip_supply_type,
supply_subinventory, supply_locator_id,
check_atp, optional,
mutually_exclusive_options,
low_quantity, high_quantity,
so_basis, shipping_allowed,
include_on_ship_docs, required_to_ship,
required_for_revenue, component_remarks,
transaction_type, process_flag,
assembly_item_id, component_item_number,
batch_id,component_sequence_id
VALUES (l_operation_seq, l_comp_item_id,
cur2.item_sequence, l_basis, cur2.quantity,
l_auto_request_mtls, cur2.from_date,
cur2.TO_DATE, cur2.planning_factor,
cur2.yield_factor,
l_enforce_int_requirements,
l_include_in_cost_rollup, l_supply_type,
l_supply_subinventory, NULL,
l_check_atp, l_optional,
l_mutually_exclusive_options,
cur2.minimum_quantity, cur2.maximum_quantity,
l_sale_order_basis, l_shippable_flag,
l_include_on_ship_docs, l_required_to_ship,
l_required_for_revenue, cur2.comments,
'CREATE', 1,
l_inv_item_id, l_comp_item_num,
10003535,apps.bom_inventory_components_s.nextval@system_link_visma
For Subcomponent Insert Stmt
INSERT INTO apps.bom_sub_comps_interface@system_link_visma
(substitute_component_id,
substitute_item_quantity,
assembly_item_id, component_item_id,
operation_seq_num, organization_id,
substitute_comp_number,
component_item_number,
assembly_item_number,
transaction_type, process_flag,
enforce_int_requirements,
effectivity_date,component_sequence_id,batch_id
VALUES (l_sub_comp_item_id,
cur3.quantity,
l_inv_item_id, l_comp_item_id,
cur2.operation_sequence, l_org_id,
l_sub_comp_item_num,
l_comp_item_num,
l_item_num,
'CREATE', 1,
l_enforce_int_requirements,
SYSDATE,apps.bom_inventory_components_s.currval@system_link_visma,10003535
Thanks
Raman Sharma
Edited by: 929841 on May 4, 2012 12:28 AM
Edited by: 929841 on May 4, 2012 2:58 AM

You need to populate the organization_id or organization_code in bom_inventory_comps_interface.
Here is a minimal insert
INSERT INTO bom.bom_inventory_comps_interface
            (operation_seq_num, last_update_date, last_updated_by,
             creation_date, created_by, process_flag, transaction_type,
             bom_item_type,
             effectivity_date, organization_code, assembly_item_number,
             item_num, component_item_number, component_quantity
     VALUES (1                                                   -- op_seq_num
             ,SYSDATE, 1433
             ,SYSDATE, 1433, 1                                  -- process_flag
             ,'Create',
             4 -- bom_item_type 1 Model; 2 Option class; 3 Planning; 4 Standard; 5 Product family
             ,SYSDATE - 1, 'PUB', 'SSGPARENT1'          -- assembly_item_number
             ,10                                                     --item_num
             , 'SSGCOMP1'                           -- component_item_number
             , 10                                          --qty
            )Sandeep Gandhi

Node is not processing

Similar Messages

Maybe you are looking for