Node manager service not starting
Hi
I am doing a uccx setup with cucm in VM ware.
I am not able to open the appadmin page and when i triy to do so the node manger service get stopped .
from the mvir loggs in "c:\program files\wfavvid\logs\mivr " i cann't see anything.
what can be the possibility for this.
Appreciate your quicj response.
Thanks
You're not providing much to work with here.
What version of UCCX are you working with? What version of Callmanager? Have you confirmed that your services are running on CallManager (like the callmanager service, CTI Manager, AXL service, etc.)? Those services sometimes don't start properly if your VM's are on underpowered hosts. Check them.
If the node manager doesn't start, usually, it tries to reboot the UCCX server. Is that happening? What errors are you seeing in the event logs? Are your services working and processing scripts?
Is this a new install, or was it working and just broke?
Tell us more. We can't see what's going on over there.
Cliff
Similar Messages
-
Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name: System
Source: Service Control Manager
Date: 21/01/2015 4:50:32 PM
Event ID: 7024
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7024</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
<EventRecordID>53721</EventRecordID>
<Correlation />
<Execution ProcessID="568" ThreadID="12436" />
<Channel>System</Channel>
<Computer> intentionally removed.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Remote Desktop Management</Data>
<Data Name="param2">%%2284126209</Data>
<Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name: Application
Source: MSSQL$MICROSOFT##WID
Date: 21/01/2015 5:24:47 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: NETWORK SERVICE
Computer: intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
<Provider Name="MSSQL$MICROSOFT##WID" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
<EventRecordID>4228336</EventRecordID>
<Channel>Application</Channel>
<Computer>intentionally removed.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data> Reason: Could not find a login matching the name provided.</Data>
<Data> [CLIENT: <named pipe>]</Data>
<Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Wily Enterprise Manager Service not Started in Windows 2008 Server
Hi All,
Our Solution Manager is in EHP1 SP21 and OS-Windows 2008 Server.
We installed Wily Enterprise Manager 8.0. and found 1 non-fatal error in the installation log. The service is not starting.
However it works fine for Windows 2003 Server.
Can anyone encountered with the same kind of problem?
This is the latest log file information:
Summary
Installation: Successfulwith errors.
387 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Action Notes:
Execute ANT Script: Script:
Status: ERROR
Additional Notes: ERROR - E:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:425: Timeout: killed the sub-process
Thank you in advance.
Regards
SanjaiNote 1273028 - Introscope 8 Release Notes resoved this issue.
Known problems in all Releases 8.x
2. Windows Server 2008 is not yet officially supported by CA Wily for the Enterprise Manager. If you want to install the Enterprise Manager anyway, set the "Windows 2003 compatibility mode" for the installer before launching it. To activate this mode, right click on the installer.exe file in the Windows Explorer, select tab "Compatibility", activate the check box for compatibility mode and select Windows 2003. If you do not set this, the installer will consider your OS as Unix and install shell scripts (no suffix) instead of batch files (.bat) and leave out some files for Windows Service registration.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error. -
Weblogic managed service not starting up after Windows restart
Hi All
I have an issue with start up of Managed instances configured as windows service. When we reboot the machine the services which are configured to be automatically start are not starting up. When I manually start them they would just run fine. I have no clue why this is happening. We have our applications running on Weblogic Server 8.1 SP6
I already tried the following method stated in this URL http://www.javagalaxy.com/forum/viewtopic.php?f=8&t=188? and had no luck with the service start up.
Can someone please guide me through what I can do to fix this issue.
Thanks in advance for help.
Edited by: user4970372 on May 7, 2010 7:28 AMI did enable the log and see the same error
<May 19, 2010 1:07:00 PM CDT> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at com.rsa.jsafe.JA_PKCS5Padding.a([BIILjava.lang.Object;)I(Unknown Source)
at com.rsa.jsafe.JG_BlockCipher.decryptFinal([BI)I(Unknown Source)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:67)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
--------------- nested within: ------------------
weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:77)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
>
<May 19, 2010 1:07:00 PM CDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]>
The WebLogic Server did not start up properly.
com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at com.rsa.jsafe.JA_PKCS5Padding.a([BIILjava.lang.Object;)I(Unknown Source)
at com.rsa.jsafe.JG_BlockCipher.decryptFinal([BI)I(Unknown Source)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:67)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
--------------- nested within: ------------------
weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:77)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:56)
at weblogic.management.EncryptionHelper.decryptString(EncryptionHelper.java:45)
at weblogic.ldap.EmbeddedLDAP.initServerConfig(EmbeddedLDAP.java:1147)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:231)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:815)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
Reason: weblogic.security.internal.encryption.EncryptionServiceException - with nested exception:
[com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.]
*************************************************************************** -
Oracle Management Server not starting up. says node manager is down!!!
Hi ALL,
We are trying to startup (OMS) Oracle Management Server but it's not starting up. it tries to connect to the node manager and says failed to connect to Node Manager as the node manager is not running.
OPMN also not running.
I have attached a snapshot so you can see.
PLEASE HELP
hi Again, below are the error reports
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at omkn-ms01.int.unisa.ac.za:7403.
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.socketConnect(Native Method)
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.Socket.connect(Socket.java:529)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:228)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Attempt to connect to nm failed. Trying to start it...
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>status of node manager:
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Not connected to Node Manager
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
2014-01-30 18:56:52,363 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:172)
regards,
Ambrose.I assumethe node manager is not running on Exadata though you have posted in the Exadata forum !
how are you starting it. Are you using the gcstartup script within init.d ?
Thanks -
CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start
Dear,
After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
From what we see this error seems to be a problem in the license.
Following is the error:
ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
Thanks for help!Hi,
From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
please see below the correct startup type
configuration for LMS Services. As you notice you see that only the
"CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
start automatically, the Daemon Manager is responsible for starting all the
other CiscoWorks LMS services in a specific order.
So by having the below configuration, LMS will start correctly by itself
after Windows successfully reboots. In fact having any other start up
configuration will cause LMS to not start, because if one of the LMS
services starts before it dependent services, it will not come up and all
subsequent services will fail to start as well.
CiscoWorks ANI database engine - Manual (if Campus Manager installed)
CiscoWorks Daemon Manager - Automatic
CiscoWorks RME NG database engine - Manual (if RME installed)
CiscoWorks Tomcat Servlet Engine - Manual
CiscoWorks VisiBroker Smart Agent - Manual
CiscoWorks Web Server - Manual
CWCS Cmf database engine - Manual
CWCS rsh/rcp service - Automatic
CWCS syslog service - Automatic
CWCS tftp server - Automatic
If DFM installed:
DFM dfmEpm database engine - Manual
DFM dfmFh database engine - Manual
DFM dfmInv database engine - Manual
If IPM installed:
IPM Aging Server - Automatic
IPM DB Server - Automatic
IPM Naming Server - Automatic
IPM PM Server - Automatic
IPM Stopper - Automatic
--Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
Thanks
Afroj -
Where do I find the "Node Manager" service?
Can anyone tell me where to find the "Node Manager Service" In Call Manager 5.1.2 or IPCC 4.5?
My db_CRA database in IPCC is not updating the real time ICD statistics table and Bug CSCsc09160 seems to indicate that stopping and starting the "Node Managers" may fix the issue.
From the bug report:
Symptom:
Under the db_cra two tables (RtCSQsSummary and RtICDStatistics) are not updating. They stop updating concurrently with engine failovers and reboots. Only a hard reboot or a
service failover brings them back into an active state.
When the RtCSQsSummary and RtICDStatistics tables do update on the
primary DB they do not update on the secondary DB and the data on them
doesnt get refreshed.
Conditions:
stopping Node manager on node 1, data fails to be written to node 2. Then when we start NM back up on node 1 data is still not written to either data store
Workaround:
Not much as a workaround, because the solution requirs stop on both Node
Managers and bring up node 1 first and the data starts writing to DB
again.
Thanks,
BrianPost Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution. -
Cisco Unified CCX Node Manager service terminated unexpectedly
"Windows must now restart because the Cisco Unified CCX Node Manager service terminated unexpectedly."
After I installed my CCX os and software. The os reminded me like above. I guessed I need to upgrade the patch of my OS. And I also installed McAfee ver 8.5i at my OS. But that doesn't work. I noticed that the status of cisco unified ccx node manager was starting.On a new install, this can occur if you start patching the OS before you get UCCX installed. This is especially a problem in an HA environment. Some of the patches set values to things they should not be if they are applied before the software is installed.
When installing UCCX on a new system, you should build the OS on the box (DO NOT PATCH at this time), Install the UCCX software and integrate with CCM, get your second server (if you are doing HA) on line with OS and UCCX and integrated. Once all the above are done, then you can start installing OS patches and UCCX patches.
You should NEVER start installing things like AV software before you have the system completely up and working. If you do, and they cause issues, you cannot tell if it's a system issue, or something caused by your a/v software. -
EPMA Windows Services not starting
Before you all jump on me, I've read almost all of the threads and documentation concerning this issue that are out there. I've checked the databases and they are configured appropriately, I've checked the IPv6 settings and they are ok. this EPMA installation is on a windows server 2008 r2 platform, Planning and other components are installed in a LINUX environment. I've got everything just about working except for the Dimension Server. The service will not start:
Log Name: Application
Source: Hyperion EPMA DimensionServer
Date: 8/23/2012 11:59:52 AM
Event ID: 0
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: my-server-name
Description:
Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start because database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String configFileName, Boolean restorePastInstanceSessions, Boolean enableCaching)
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.Service.Main.InitializeSessionManager()
at Hyperion.DimensionServer.Service.Main.Start()
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Hyperion EPMA DimensionServer" />
<EventID Qualifiers="0">0</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-08-23T15:59:52.000000000Z" />
<EventRecordID>4404</EventRecordID>
<Channel>Application</Channel>
<Computer>my-server-name</Computer>
<Security />
</System>
<EventData>
<Data>Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start because database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String configFileName, Boolean restorePastInstanceSessions, Boolean enableCaching)
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.Service.Main.InitializeSessionManager()
at Hyperion.DimensionServer.Service.Main.Start()
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)</Data>
</EventData>
</Event>
Dimension SErver log:
[2012-08-23T11:58:06.501-04:00] [EPMADIM] [NOTIFICATION:32] [EPMADIM-1] [EPMADIM.Hyperion.NetJNIBridge.Process.Program] [tid: EPMA NetJNIBridge] [ecid: disabled,0] Binding to port: 5255
[2012-08-23T11:58:06.657-04:00] [EPMADIM] [NOTIFICATION:32] [EPMADIM-1] [EPMADIM.Hyperion.DimensionServer.Utility.ChannelUtility] [tid: EPMA NetJNIBridge] [ecid: disabled,0] Detected pure IPv4 environment. Using default binding.
[2012-08-23T11:59:52.176-04:00] [EPMADIM] [NOTIFICATION:32] [EPMADIM-1] [EPMADIM.Hyperion.DimensionServer.Global] [tid: EPMA Server Startup] [ecid: disabled,0] Dimension Server terminated.
[2012-08-23T11:59:52.380-04:00] [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: EPMA Server Startup] [ecid: disabled,0] SVR_ERR_PROCESSMGR_CANT_INIT_SESSIONMGR:Cannot initialize the Session Manager. at Hyperion.DimensionServer.Service.Main.InitializeSessionManager()
at Hyperion.DimensionServer.Service.Main.Start()
I don't know if this is relevant but here's a snippet from the shared services security log:
[2012-08-23T11:41:18.958-04:00] [EPMCSS] [TRACE] [] [oracle.EPMCSS.CSS] [tid: 29] [ecid: 0000J_K7LfyComI_mp0FyZ1GD^h3000009,0] Duplicate Entry[[
com.hyperion.css.dal.DALUniqueConstraintException: ORA-00001: unique constraint (EBASEADM.PK_PROV_INFO) violated
at com.hyperion.css.dal.jdbc.oracle.OracleExceptionHandler.handle(OracleExceptionHandler.java:20)
at com.hyperion.css.dal.jdbc.wrapper.CSSPreparedStatement.executeUpdate(CSSPreparedStatement.java:129)
at com.hyperion.css.store.policy.PolicyStoreImpl.addRolesForEntry(PolicyStoreImpl.java:985)
at com.hyperion.css.facade.impl.CSSUserProvisioningAPIImpl.setRolesList(CSSUserProvisioningAPIImpl.java:2352)
at com.hyperion.css.facade.CSSUserProvisioningFacade.setRolesList(CSSUserProvisioningFacade.java:1059)
at com.hyperion.interop.lib.helper.RegistryHelper.reRegisterApplication(RegistryHelper.java:646)
at com.hyperion.interop.lib.helper.RegistrationHelper.register(RegistrationHelper.java:565)
at com.hyperion.interop.lib.CMSClient.register(CMSClient.java:738)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
at org.mozilla.javascript.optimizer.OptRuntime.callN(OptRuntime.java:86)
at org.mozilla.javascript.gen.c66._c0(D:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\repository\product\epmawebtier\58-register-instance-file.js:45)
at org.mozilla.javascript.gen.c66.call(D:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\repository\product\epmawebtier\58-register-instance-file.js)
at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
at org.mozilla.javascript.gen.c66.call(D:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\repository\product\epmawebtier\58-register-instance-file.js)
at org.mozilla.javascript.gen.c66.exec(D:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\repository\product\epmawebtier\58-register-instance-file.js)
at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
at com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner.runNextScript(ProductDeployScriptRunner.java:187)
at com.hyperion.cis.config.DeploymentApiAdapter.deploy(DeploymentApiAdapter.java:118)
at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:804)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:498)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:90)
at java.lang.Thread.run(Thread.java:619)
Any insight as to what I can do here will be appreciated!You should take a look at the *"Database Installation"* part from the Installation Start here guide since if you are using Oracle Database to configure the EPMA components you need to install the Full Oracle Database Client since the PATH variable includes the path to the /bin folder for the Database client.
Following is from the installation start here guide for EPM 11.1.2.2
Install the full Oracle Database client on the following machines before you start your installation of EPM System products:
Performance Management Architect Dimension server.
Note:
1. It is important to install the full database client as part of the installation because the PATH variable is updated to include the path to the /bin folder of the Oracle client.This setting is required for successful configuration.
2. If you are using Oracle Database 10.2.0.4+, you must use a minimum of Oracle Database client 11.1.0.6.0.
3. Performance Management Architect and Financial Management both require that a 64-bit Oracle Database client be installed.
Thanks
HyperEPM -
HP Connection manager service not installed. Application will exit
I'm actually having a number of problems with this laptop, but I figured I'd start with this one. I get the message "HP connection manager service not installed. Application will exit.
As strange as this may seem, when I get this message, I also cannot open any of the folders on my desktop. I don't know if the problems are related or not.
Any help is appreicated !
If this helps its model number is A5F92AVHi @krazykat_randi ,
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having multiple issues with your notebook, one of which is when you try to open the connection manager you get the message "HP connection manager service not installed. Application will exit.". You also can not open folders on your desktop.
Have you checked for viruses or malware? MS Malicious Software Removal Tool.
This is not a recommendation but many people have used Malwarebytes with success also.
Have you tried running MS Fix It to aid with overcoming issues?
Have you tried doing a restore back to when it was working properly?
If you still have issues I suggest you do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 7)
If you have not yet done a backup you will have an opportunity during the recovery to do one.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
EPMA server service not started
Hi All,
I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
but i am facing two issues.
1. In services, EPMA Server service not started.
2. In FDM, I am getting error in connecting to Essbase.
Error: Unable to retrieve target system data.
Is any thing, i have to install additionally?
Regards,
madyHi,
In Windows Event Viewer i got this message.
Log Name: System
Source: Service Control Manager
Date: 9/3/2012 12:46:12 AM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: hyperionepm
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
<EventRecordID>70587</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="16540" />
<Channel>System</Channel>
<Computer>hyperionepm</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Parallels Tools Service</Data>
</EventData>
</Event> -
Oracle Management Server Not starting
Hi all,
I created the OMS server, but it is not getting started. I am on Linux Fedora2 with Oracle 9iR2. When I give
oemctl start oms
it says that OMS startup timed out.
Please do help
The following are the output from the oms.nohup file
Starting the management server at Wed Feb 9 15:52:16 IST 2005
OEMCTL for Linux: Version 9.2.0.1.0 Production
Copyright (c) 1998, 2002, Oracle Corporation. All rights reserved.
Starting the Oracle Management Server...
Error starting Oracle Management Server. ORBSingleton: access deniedjava.lang.SecurityException: ORBSingleton: access denied
at com.sun.corba.se.internal.corba.ORBSingleton.connect(ORBSingleton.java:309)
at oracle.sysman.vxn.VxnNamingContext.<init>(VxnNamingContext.java:285)
at oracle.sysman.vxn.VxnNamingContext.getNewContext(VxnNamingContext.java:222)
at oracle.sysman.vxn.VxnNamingService.getInitialContext(VxnNamingService.java:1072)
at oracle.sysman.vxn.VxnNamingService.enableBootstrap(VxnNamingService.java:1080)
at oracle.sysman.vxn.VxnNamingService.init(VxnNamingService.java:238)
at oracle.sysman.vxn.VxnNamingService.getNamingService(VxnNamingService.java:103)
at oracle.sysman.vxn.VxnNamingService.getNamingService(VxnNamingService.java:112)
at oracle.sysman.vxa.VxaAppServer.initServer(VxaAppServer.java:3417)
at oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:3048)
OMS exited on Wed Feb 9 15:52:18 IST 2005 with return value 56
Could not start management server. Initialization failure
\nManagement server startup failed. Check the file /oracle/ora9/product/9.2.0.1.0/sysman/log/oms.nohup for detailsI assumethe node manager is not running on Exadata though you have posted in the Exadata forum !
how are you starting it. Are you using the gcstartup script within init.d ?
Thanks -
Re: Node Manager is not responding
Yes, we have seen this also. But only on NT Nodes. I have not seen this
occur on UNIX or VMS. The only way we have been able to clean it up is by
using Mark Russinovich's HandleEx utility. You cannot even look at it
using Escript/environment console. It just hangs. It usually happens when
available memory(RAM) is very low. I have not been able to find a way to
resolve this problem without killing/restarting the nodemgr itself.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>We have the same problem when there are too many users connected to the
environment. When the number of users reaches about 450 to 500, the
environment become very unresponsive. Then it just hangs. We then have to
kill the process and start it again. The way we have resolved this problems
is by keep the number of users connected to the environment to about 400 to
450.
Mark what do you mean by Mark Russinovich's HandleEx utility?
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From:
[email protected][SMTP:[email protected]
Sent: Monday, June 21, 1999 11:39 AM
To: [email protected]
Cc: [email protected]
Subject: Re: Node Manager is not responding
Yes, we have seen this also. But only on NT Nodes. I have not seen this
occur on UNIX or VMS. The only way we have been able to clean it up is by
using Mark Russinovich's HandleEx utility. You cannot even look at it
using Escript/environment console. It just hangs. It usually happens
when
available memory(RAM) is very low. I have not been able to find a way to
resolve this problem without killing/restarting the nodemgr itself.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
SAP Service Not Starting in BI 7.0
Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay PaulHi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul -
Apple mobile device service not started
Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7first I would check the event viewer for into about what goes wrong that cause the service to fail
if this don't give a clear image about what the problem is
then I would uninstall itunes and resinstall it
if that didn't help I would ask questions about solve the problem in the itunes for windows forum where people wise in the ways of itunes would be more likely to read your post
https://discussions.apple.com/community/itunes/itunes_for_windows
Maybe you are looking for
-
How do you unlock a disabled ipad mini? I have my notes in Notability and I don't want to lose them. I know my passcode but I left my keyboard on and it disabled it.
-
Backup DB with dynamic sql - want to substitute in dbname and disk file path
Re: Backup DB with dynamic sql - want to substitute in dbname and disk file path Hope I can explain this. Below is a small snippet of code. I want to set @SQLTemplate_TSQL once at the top of the script and then execute the SET @SQLCommand and sp_exec
-
Logical database excess problem
hi frends, is it possible to make single report for using multiple logical databases ?
-
I just started working in ODI sometime back. But getting problem while creating a fact table. In datstore i am creating foreign keys(i.e Reference Key) for the fact table which have respective parent table and primary key. but after executing the int
-
Skype EXC_BAD_ACCESS (SIGBUS) KERN_PROTECTION_FAILURE
Please help, can't open Skype not sure what to do? Process: Skype [179] Path: /Applications/Skype.app/Contents/MacOS/Skype Identifier: com.skype.skype Version: 2.8.0.851 (2.8.0.851) Code Type: X86 (Native) Parent Process: launchd [117] Date/Time: 201