Node missing - subcontracting with chargeable components
Dear Experts,
Our system is ERP EHP5 SPS05.
In SPRO under MM - Inventory Management and Physical Inventory -
the node Subcontracting with chargeable components is missing
Please help.
Thanks.
Dear Kotakonda,
In the IMG activity Activation Switch for SAP R/3 Enterprise Extension Set, activate Extension Set
EA-SCM.
Then carry out the IMG activities for Subcontracting with Chargeable Components in Customizing for
Materials Management (MM), by choosing Inventory Management and Physical Inventory ->
Subcontracting with Chargeable Components.
See also
SAP Note 641298
and link http://help.sap.com/saphelp_47x200/helpdata/en/cb/2f26455c59a046a37e58dc3f1ae85e/Chap_09_MM.pdf
Hope it helps
Thanks & Regards,
Amit Barnawal
Similar Messages
-
Subcontracting with chargeable components Node missing
Dear Experts,
Our system is ERP EHP5 SPS05.
In SPRO under MM - Inventory Management and Physical Inventory -
the node Subcontracting with chargeable components is missing
Please help.
Thanks.Try Transaction code SCC.
It will take you to the config for sc with chargable components
Rajesh -
Subcontracting with Chargeable Components
Hi All,
Please tell me configartion steps of Subcontracting with Chargeable Components.
what is the business process to map in SAP.
Regards
PavanI actually found this one in help.sap.come:
http://help.sap.com/erp2005_ehp_04/helpdata/DE/15/318debd36f6348ab711dd588f9ec54/frameset.htm -
SCC u2013 Sub contracting with Chargeable components
we need to use SCC u2013 Sub contracting with Chargeable components.
For that, Activated u2018SCCu2019 at Client level and Valuation area level.
Any further config process required to use this process?
I did not find any difference in postings between normal Sub-con process and SCC.
Please advise what is the difference?
Advance THANKS for replies.
V. RAMAN.Hi,
This procedure provides the way of manual payment for Subcontract expense.
I want to clear Accrued revenue by deduction AP using T code /n/SAPNEA/JSCR19
While posting, I am getting error message Amount too large to clear", maybe the system set the limit for the tolerance value for clear document. Please suggest me, where to change the settings.
Rahul -
Sub-contracting with chargeable component.
Hi All,
I am doing following scenario
Scenario: Sub-contracting with chargeable component.
Activity: Clearing (Consumption-Based)
T Code - /n/SAPNEA/JSCR19
Amount: 23,100,000
While action posting, we are getting following error message
Error Message: E The difference is too large for processing
Kindly suggest where to do necessary changes in the system.
RahulHi,
This procedure provides the way of manual payment for Subcontract expense.
I want to clear Accrued revenue by deduction AP using T code /n/SAPNEA/JSCR19
While posting, I am getting error message Amount too large to clear", maybe the system set the limit for the tolerance value for clear document. Please suggest me, where to change the settings.
Rahul -
Java node 'server0' terminated with exit code 2150 after JSPM patches
Dear Experts,
We want to install SAP Netweaver 7.3 EHP1.
After applying patches SP11 from JSPM utility we tried to restart the SAP Java instances from SAP MMC.
But it failed to start with error code :
*** LOG => SfCJavaVm: exit hook is called. (rc = 2150)
*** ERROR => Java node 'server0' terminated with exit code 2150.
*** To resolve the issue, we restarted machine, Database services, SAP services but it still did not start.
*** Let us know if you need any other trace file for debugging.
Below is the log file:
stdout log file:-
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:10:29 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [109] ms
Substituted the values for [94] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.296: [GC2.296: [ParNew: 343552K->8912K(381696K), 0.0251348 secs] 343557K->8917K(2059008K), 0.0253589 secs] [Times: user=0.03 sys=0.03, real=0.02 secs]
[125] ms
Loading [ThreadManager]... [32] ms
Loading [ClassLoaderManager]... [31] ms
Loading [ClusterManager]... [485] ms
Loading [LockingManager]... [63] ms
Loading [ConfigurationManager]... [1624] ms
Loading [CacheManager]... [141] ms
Loading [DatabaseManager]... [547] ms
Loading [SessionManager]... [515] ms
Loading [LicensingManager]... [32] ms
Loading [ServiceManager]...
Initialize components for : 94 ms.
Resolve components for : 31 ms.
Load components for 969 ms.
Loading services.
Calculate startup service set for 266 ms.
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [62] ms / [0] CPU ms
Service [engine.dsr.facade] started. [62] ms / [0] CPU ms
Service [webservices] started. [62] ms / [0] CPU ms
Service [tc~je~security~api] started. [62] ms / [0] CPU ms
Service [tc~je~cross~api] started. [62] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [62] ms / [0] CPU ms
Service [r3startup] started. [62] ms / [0] CPU ms
Service [security.destination.facade] started. [62] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [62] ms / [0] CPU ms
Service [tc~je~sca~jco.plugin] started. [110] ms / [0] CPU ms
Service [jmx_notification] started. [140] ms / [15] CPU ms
Service [cluster] started. [125] ms / [0] CPU ms
Service [runtimeinfo] started. [109] ms / [15] CPU ms
Service [memory] started. [297] ms / [31] CPU ms
Service [timeout] started. [297] ms / [15] CPU ms
Service [userstore] started. [297] ms / [0] CPU ms
Service [tc~sec~destinations~provider] started. [344] ms / [171] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 298078K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 84% used [0x000000013fe70000, 0x00000001518d3970, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157be4038, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 60K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 31907K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:10:46 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [188] ms
Substituted the values for [78] ms
Finished reading kernel objects for [266] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.406: [GC2.406: [ParNew: 343552K->8913K(381696K), 0.0187920 secs] 343557K->8919K(2059008K), 0.0190498 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[141] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [94] ms
Loading [ClusterManager]... [454] ms
Loading [LockingManager]... [47] ms
Loading [ConfigurationManager]... [1578] ms
Loading [CacheManager]... [78] ms
Loading [DatabaseManager]... [344] ms
Loading [SessionManager]... [296] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 78 ms.
Resolve components for : 16 ms.
Load components for 703 ms.
Loading services.
Calculate startup service set for 172 ms.
Service [webservices] started. [16] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [16] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [r3startup] started. [16] ms / [0] CPU ms
Service [tc~je~cross~api] started. [31] ms / [0] CPU ms
Service [tc~je~security~api] started. [47] ms / [0] CPU ms
Service [engine.dsr.facade] started. [47] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [47] ms / [0] CPU ms
Service [security.destination.facade] started. [47] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [47] ms / [0] CPU ms
Service [cluster] started. [62] ms / [15] CPU ms
Service [tc~je~sca~jco.plugin] started. [62] ms / [0] CPU ms
Service [jmx_notification] started. [46] ms / [0] CPU ms
Service [runtimeinfo] started. [62] ms / [0] CPU ms
Service [memory] started. [172] ms / [15] CPU ms
Service [tc~sec~destinations~provider] started. [234] ms / [109] CPU ms
Service [timeout] started. [266] ms / [31] CPU ms
Service [log_configurator] started. [312] ms / [46] CPU ms
Service [userstore] started. [312] ms / [31] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 298923K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 84% used [0x000000013fe70000, 0x00000001519a6a18, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157be45b8, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 60K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 31359K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Service [locking] started. [47] ms / [0] CPU ms
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:11:02 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [110] ms
Substituted the values for [93] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.297: [GC2.297: [ParNew: 343552K->9136K(381696K), 0.0230809 secs] 343557K->9142K(2059008K), 0.0233963 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[125] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [16] ms
Loading [ClusterManager]... [501] ms
Loading [LockingManager]... [62] ms
Loading [ConfigurationManager]... [1500] ms
Loading [CacheManager]... [125] ms
Loading [DatabaseManager]... [453] ms
Loading [SessionManager]... [406] ms
Loading [LicensingManager]... [32] ms
Loading [ServiceManager]...
Initialize components for : 110 ms.
Resolve components for : 32 ms.
Load components for 953 ms.
Loading services.
Calculate startup service set for 265 ms.
Service [tc~je~security~api] started. [16] ms / [0] CPU ms
Service [webservices] started. [16] ms / [15] CPU ms
Service [engine.lm.log.facade] started. [0] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [0] ms / [0] CPU ms
Service [engine.dsr.facade] started. [0] ms / [0] CPU ms
Service [r3startup] started. [0] ms / [0] CPU ms
Service [tc~je~cross~api] started. [0] ms / [0] CPU ms
Service [security.destination.facade] started. [32] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [32] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [32] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [32] ms / [0] CPU ms
Service [tc~je~sca~jco.plugin] started. [47] ms / [15] CPU ms
Service [jmx_notification] started. [125] ms / [31] CPU ms
Service [runtimeinfo] started. [109] ms / [15] CPU ms
Service [cluster] started. [109] ms / [0] CPU ms
Service [userstore] started. [156] ms / [15] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
Service [timeout] started. [235] ms / [31] CPU ms
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 275035K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 77% used [0x000000013fe70000, 0x000000015021acd0, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157c1c238, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 59K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 29998K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Service [memory] started. [312] ms / [46] CPU ms
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:11:18 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [15] ms
Objects read for [109] ms
Substituted the values for [94] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [94] ms
Loading [PoolManager]... [16] ms
Loading [ApplicationThreadManager]... 2.267: [GC2.268: [ParNew: 343552K->9051K(381696K), 0.0218818 secs] 343557K->9057K(2059008K), 0.0221899 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[156] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [16] ms
Loading [ClusterManager]... [485] ms
Loading [LockingManager]... [62] ms
Loading [ConfigurationManager]... [1297] ms
Loading [CacheManager]... [141] ms
Loading [DatabaseManager]... [437] ms
Loading [SessionManager]... [406] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 110 ms.
Resolve components for : 31 ms.
Load components for 953 ms.
Loading services.
Calculate startup service set for 265 ms.
Service [engine.lm.log.facade] started. [16] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [16] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [16] ms / [0] CPU ms
Service [webservices] started. [16] ms / [0] CPU ms
Service [engine.dsr.facade] started. [16] ms / [0] CPU ms
Service [tc~je~cross~api] started. [16] ms / [0] CPU ms
Service [r3startup] started. [32] ms / [0] CPU ms
Service [tc~je~security~api] started. [32] ms / [0] CPU ms
Service [security.destination.facade] started. [32] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [runtimeinfo] started. [47] ms / [15] CPU ms
Service [tc~je~sca~jco.plugin] started. [47] ms / [0] CPU ms
Service [jmx_notification] started. [63] ms / [0] CPU ms
Service [cluster] started. [47] ms / [15] CPU ms
Service [timeout] started. [172] ms / [93] CPU ms
Service [userstore] started. [140] ms / [31] CPU ms
Service [memory] started. [172] ms / [15] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 277992K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 78% used [0x000000013fe70000, 0x0000000150513298, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157c06fd0, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 59K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 30982K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Thanks and Regards,
Muddassar KhanHi Muddassar,
Hope you are doing good.
A new note has been released exclusively for this issue. Please see:
note 1937296 - SUM fails at start-shadow-instance-dm step. This is not
an issue with the SCAs and more with the kernel employed.
You will need to make sure that you are on the latest kernel so that
this can be resolved.
The below links will help you if there are any queries with the
kernel update procedure
SAP Note No. 1636252 - Installing a 7.20 kernel in SAP Web AS
7.00/7.01/7.10/7.11
SAP Note No. 1629598 - SAP Kernel 720 will replace older
kernel versions
SAP Note No. 19466 - Downloading SAP kernel patches
Also check:
<http://scn.sap.com/docs/DOC-1206>
(for Manual Kernel Upgrade)
and
<http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/11219>
(for kernel upgrade using JSPM)
Thank you and have a nice day!
Kind Regards,
Hemanth -
PS subcontracting with external activity
Hi,
I have a couple of questions about "PS subcontracting with external activity" I have not found any information about this for PS subcon flow, I was looking for a subcon PS Wiki but no succeed.
The scenario is to use a external activity to a subcontractor and put the material components to deliver in the external activity and check the subcon check box. Then use the valuated project stock for holding the materials.
For material components there is an option in tab "Proc. Param" and fiel "Mat. Prov. Ind." = "Material Provision Indicator", do you know if this option can be use or be available in PS? This field is grey so I can not do anything with it, so my guess is that option use only by a BOM, could you confirm that for me?
Right now I have a problem in the system so I can not save a project when creating a external activity and use the subcon check box, this is at OSS right now. But I was wondering if I put the material components in a external activity, how will it be represented in the PO?
Will it be only one item in the PO, the service from the external activity? and inside this item will hold all my material components? this can be found in tab "Material data" -> "Components".
Please share if you have some information about this,
Regards
Jose
PS Note that this scenario is not a MM subconabdul,
I'm talking what you can do in the system, there is 3 posibilities I have in mind:
Alternative 1
Is when I will send all the parts, thats right separated parts to be one. The material which will be the final material, is not in my stock/company. It is a new material Im manufacturing with the help of a subcontractor.
In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will put it together to the final material.
For this alternative I think I have to create the material which the subcontractor will put together and have it as a head material in a BOM. The BOM will represent the parts Im sending for assembly, so when the material is deliver back to me, I will do a goods receipt of the head material.
My question is in this if I have thought this right, if you have experience of this please contact me.
Alternative 2
Is when I will send a existing material and all the parts which will be use to maintain/repair this particular material from my stock/company to a subcontractor who will do the work. This material will have the same material no. when I do the goods receipt.
In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will maintain/repair the material.
For this alternative I think I can use a BOM, create a BOM of this existing material which will be maintain/repair with the parts I will send.
My question is in this if I have thought this right, if you have experience of this please contact me.
Alternative 3
This alternative is almost the same as alternative 2 with the exception that the material Im sending will change the material no when its back from the subcontractor. So I will send a existing material and all the parts which will be use to maintain/repair this particular material from my stock/company to a subcontractor who will do the work. This material will get a new material no. when I do the goods receipt.
In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will maintain/repair the material.
For this alternative I think I can use a BOM, create a BOM of this existing material which will be maintain/repair with the parts I will send. Then I have to put the new material in my external activity as a material component with negative quantity as part of the subcontracting delivery
My question is in this if I have thought this right, if you have experience of this please contact me.
I hope my question is now clear for you, we are using the defence and aero solution so what I know I do can use the subcontracting with valuated project stock -
Subcontracting with project stock
Hi All,
When using project stock as we cannot issue components to the subcontractor in the subcontracting process we have created a new storage location for the subcontractor. So when the components will be sent to the subcontractor we will move the components from one storage location to the subcontractor's storage location using movement 311 Q.
But how do I get the delivery document that should be sent with these components. Is there a SAP standard way of triggering the delivery documents in this case?
Regards,
V SHi,
In case of subcontracting PO with account assignment for Project, components are directly withdrawn from the project stock at the time of the goods receipt. But if you want to withdraw the components from the stock of material provided to vendor then you can set the collective requirement field in Material Master MRP4 view as Collective requirements only (2), then you can use ME2O.
The collective requirement field has to be set for the components to be provided.
If you work with this setting then you don't need any seperatestorage location the process will behve as normal subcontracting process.
Regards
Chandra Shekhar
Edited by: Chandra Shekhar Singh on Jul 14, 2011 6:48 PM -
Hi,
Can anybody send me step by step configuration of subcontracting with delivery to my mail id:[email protected]
The following is my scenario.
We are sending raw materials to one vendor in batches.And in turn that vendor will send back the finished goods to the company.It is an urgent please.
Thanks in advance
kumar
Message was edited by:
MANUPATI KUMARHi,
First Create BOM in Transaction code: CS01, for your Finished product which you want to procure from the SC Vendor........in items you can give the Raw materials you are providing to SC Vendor.....Very Importanly, for the component you want to send to SC Vendor also should have the Sales view....then only the Shipping point determination and all takes place...
Then in Transaction code ME11, create Sub Contracting Inforecord
Then in OLME-->Purchase Order>Set up Sub Contract Order--
> For your Plant from where you are shipping the material to SC Vendor, Assign Delivery type LB....
Then for your Suppling Plant Sales Area, Create one Customer master and in that customer master assign your SC Vendor in General Data->Control Data Tab>In Vendor Field and In Sales Area Data-.> Shipping Data tab--
>Maintain entries in Delivery Priority,Shipping Conditions,Delivering Plant fields.
Then Create SC Purchase Order with Item catogary "L"....In Item details--->Material Data Tab--
.>Components, you can view the details of the material you have to send to SC Vendor.... then save the PO
Then Goto, Transaction Code, ME2O, choose the component and choose create Delivery....then Delivery no will be created.....then you goto VL02n and do the PGI...The components will be automatically transferred to SC Vendor in 541 movement type...
After completion of work, you can do GR Normally...
Hope I have explained in detailed manner
Reward if useful
Regards
S.Baskaran -
For server Eagle-PROD-Instance, the Node Manager associated with machine
I have a wlst script that creates a domain and a managed server. I associate the server with a machine that's attached to a node manager. It creates the managed server fine but when I try and start it I get this error
For server Eagle-PROD-Instance, the Node Manager associated with machine Eagle-Machine is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
The machine is associated with the Node Manager and the NM is running. I can start the managed server from the command line, but not from the admin console
This is the script, am I missing something?
Thanks
name: createManagedServer.py
description: This script create the weblogic domain, and executes each weblogic queue module
subfile. it reads a property file : weblogic_wlst.properties for server domain information
author : mike reynolds - edifecs 2011
created : April 8th 2011
import sys
from java.lang import System
from java.util import Properties
from java.io import FileInputStream
from java.io import File
from weblogic.management.security.authentication import UserEditorMBean
from weblogic.management.security.authentication import GroupEditorMBean
from weblogic.management.security.authentication import UserPasswordEditorMBean
# Loads the contents a properties file into a java.util.Properties
# configPropFile = "weblogic_wlst.properties"
def loadPropertiesFromFile(configPropFile):
configProps = Properties()
propInputStream = FileInputStream(configPropFile)
configProps.load(propInputStream)
propInputStream.close()
return configProps
def getProperties():
importConfigFile = sys.argv[1]
print importConfigFile
domainProps = loadPropertiesFromFile(importConfigFile)
properties = Properties()
input = FileInputStream(importConfigFile)
properties.load(input)
input.close()
return properties
def create_users(username, password, description):
# create admin user
cmo.getFileRealms()
try:
userObject=cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
userObject.createUser(username,password,description)
print "Created user " + username + "successfully"
except:
print "check to see if user " + username + " exists "
def add_user_to_group(username):
print "Adding a user to group ..."
cmo.getFileRealms()
try:
userObject2 = cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
userObject2.addMemberToGroup('Administrators',username)
print "Done adding user " + username
except:
print "check to see if user " + username + " is already in group "
def connect_server(user,pw,url):
connect(user,pw,url)
def create_machine():
try:
print 'Creating machine' + machine
# cd('/')
# create(machine, 'Machine')
mach = cmo.createUnixMachine(machine)
mach.setPostBindUIDEnabled(true)
mach.setPostBindUID('oracle')
mach.setPostBindGIDEnabled(true)
mach.setPostBindGID('oracle')
mach.getNodeManager().setNMType('ssl')
except:
print "machine exists"
def build_domain():
### Read Basic Template
WL_HOME = "C:/Oracle/Middleware/wlserver_10.3"
readTemplate(WL_HOME+"/common/templates/domains/wls.jar")
template=WL_HOME+"/common/templates/domains/wls.jar"
cd('Servers/AdminServer')
set('ListenAddress', adminServerAddress)
set('ListenPort', int(adminServerPort))
cd('/')
cd('/Security/base_domain/User/weblogic')
cmo.setPassword('w3bl0g1c')
### Write Domain
setOption('OverwriteDomain', 'true')
print "writing domain " + domainDir + domainName
writeDomain(domainDir+'/'+domainName)
closeTemplate()
create_machine()
arg = "Arguments=\" -server -Xms256m -Xmx768m -XX:MaxPermSize=256m -da\""
prps = makePropertiesObject (arg)
domain = domainDir + domainName
try:
#startNodeManager()
#nmConnect('weblogic', 'w3bl0g1c', host, 5556, 'AdminServer', domain, 'ssl')
# nmStart('AdminServer')
startServer('AdminServer', domainName, url, adminUser, adminPassword, domainDir, 'true')
except:
print "could not connect to Node Manager"
def create_server():
# get server instance properties
name = properties.getProperty("serverName")
domain = properties.getProperty("domainName")
port = properties.getProperty("listenPort")
address = properties.getProperty("listenAddress")
servermb=getMBean("Servers/" + name)
machine = properties.getProperty("machineName")
nodePort = properties.getProperty("nodeManagerPort")
domainDir = properties.getProperty("domainDir")
if servermb is None:
startEdit()
cd('/')
cmo.createServer(name)
cd('/Servers/'+ name)
cmo.setListenAddress(address)
cmo.setListenPort(int(port))
cd('/')
cmo.createMachine(machine)
cd('/Machines/' + machine + '/NodeManager/' + machine )
cmo.setNMType('Plain')
cmo.setListenAddress(address)
cmo.setListenPort(int(nodePort))
cmo.setDebugEnabled(false)
cd('/Servers/' + name)
cmo.setListenPortEnabled(true)
cmo.setJavaCompiler('javac')
cmo.setClientCertProxyEnabled(false)
cmo.setMachine(getMBean('/Machines/' + machine ))
cmo.setCluster(None)
cd('/Servers/' + name + '/SSL/' + name)
cd('/Servers/' + name + '/ServerDiagnosticConfig/' + name)
cmo.setWLDFDiagnosticVolume('Low')
cd('/Servers/' + name)
cmo.setCluster(None)
cd('/Servers/' + name + '/SSL/' + name)
cmo.setEnabled(false)
### Executable Script
### CreateDomain.py
### Define constants
WL_HOME = "C:/Oracle/Middleware/wlserver_10.3"
print "Starting the script ..."
print "Getting properties ... "
properties = getProperties()
adminServerAddress = properties.getProperty("adminServerAddress")
adminServerPort = properties.getProperty("adminServerPort")
adminUser = properties.getProperty("adminUser")
adminPassword = properties.getProperty("adminPassword")
edifecsUser = properties.getProperty("edifecsUser")
edifecsPassword = properties.getProperty("edifecsPassword")
host = properties.getProperty("host")
domainDir = properties.getProperty("domainDir")
domainName = properties.getProperty("domainName")
user = properties.getProperty("username")
pw = properties.getProperty("passwd")
url = properties.getProperty("adminURL")
machine = properties.getProperty("machineName")
print "Building the domain..."
build_domain()
print "Connecting to server"
connect_server(adminUser, adminPassword, url)
edit()
startEdit()
# create managed server
# create_machine()
create_server()
print "Creating users"
# starting configuration tree
serverConfig()
create_users(adminUser, adminPassword, "Administrator")
add_user_to_group(adminUser)
create_users(edifecsUser, edifecsPassword,"Administrator")
add_user_to_group(edifecsUser)
# have to restart edit to save config
edit()
startEdit()
# nmKill('AdminServer')
print "saving configuration"
try:
save()
activate(block="true")
print "script returns SUCCESS"
print "admin server is running"
print "starting server " + name
startServer(domainName, name ,url,adminUser, adminPassword, domainDir,'true')
except:
print "failed to save server"
dumpStack()Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers -
F *** ERROR = Node 'bootstrap' failed with exit code 503.
Hi,
i installed the sap nw 7.2 trial version succesfully and due to sapgui problem i downloaded a new sapgui 720 patches from the service place and installed and when installation ,i installed jre for the sapgui. after that when i start the sap server the jstart.exe is not started it is stopped. and showing the errror message
F *** ERROR => Node 'bootstrap' failed with exit code 503.
dev_jstart
trc file: "dev_jstart.3508", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
pid 3508
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sat May 22 10:55:11 2010
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F
F Sat May 22 10:55:11 2010
F ********************************************************************************
F Java environment properties (D:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 3512] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 3512] *** LOG => connected to Enqueue Server.
F [Thr 3512] *** LOG => connected to Message Server.
F [Thr 3512] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : D:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3648
F ********************************************************************************
F [Thr 3512] *** LOG => Process deployment started (pid 3648).
F
F [Thr 3512] Sat May 22 10:55:14 2010
F [Thr 3512] *** LOG => Process deployment stopping (pid 3648).
F
F [Thr 3656] Sat May 22 10:55:14 2010
F [Thr 3656] *** LOG => Signal 13 SIGCHLD.
F [Thr 3512] *** LOG => Process deployment stopped (pid 3648).
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 1 completed.
F [Thr 3512] *** LOG => Starting run level 2.
F
F Sat May 22 10:55:15 2010
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3736
F ********************************************************************************
F [Thr 3512] *** LOG => Process bootstrap started (pid 3736).
F
F [Thr 3512] Sat May 22 10:55:20 2010
F [Thr 3512] *** LOG => Process bootstrap stopping (pid 3736).
F
F [Thr 3744] Sat May 22 10:55:21 2010
F [Thr 3744] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:21 2010
F [Thr 3512] *** LOG => Process bootstrap stopped (pid 3736).
F [Thr 3512] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : D:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : D:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3884
F ********************************************************************************
F [Thr 3512] *** LOG => Process snapshot started (pid 3884).
F [Thr 3512] *** LOG => Process snapshot running (pid 3884).
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) connected.
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) disconnected.
F
F [Thr 3892] Sat May 22 10:55:29 2010
F [Thr 3892] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:29 2010
F [Thr 3512] *** LOG => Process snapshot stopped (pid 3884).
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 2 completed.
F [Thr 3512] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 3512] MPI: dynamic quotas disabled.
I [Thr 3512] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 3512] *** LOG => exiting (exitcode 22002, retcode 1).<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[C:\Documents and Settings\Administrator\.sdtgui\log\SDTServer.log]/>
<!PATTERN[SDTServer.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%6s]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 23, 2015 10:45:07 AM [Info ]: *************************************************
May 23, 2015 10:45:07 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:45:07 AM [Info ]: StorageService switched off.
May 23, 2015 10:45:07 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:45:07 AM [Info ]: Key Store management switched off.
May 23, 2015 10:45:08 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:45:08 AM [Info ]: WebstartService switched off.
May 23, 2015 10:45:08 AM [Info ]: RoleService switched off.
May 23, 2015 10:45:08 AM [Info ]: AlertService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting NotesService ...
May 23, 2015 10:45:08 AM [Info ]: ProcessService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting MIDService ...
May 23, 2015 10:45:08 AM [Info ]: Starting FileService ...
May 23, 2015 10:45:08 AM [Info ]: LogService switched off.
May 23, 2015 10:45:08 AM [Info ]: MailService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting services ...
May 23, 2015 10:45:08 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:45:08 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:45:08 AM [Info ]: Services started.
May 23, 2015 10:45:08 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:45:08 AM [Info ]: HTTP server started.
May 23, 2015 10:45:08 AM [Info ]: SL Controller started.
May 23, 2015 10:45:08 AM [Info ]: Starting GUI ...
May 23, 2015 10:45:11 AM [Info ]: GUI started.
May 23, 2015 10:46:53 AM [Info ]: *************************************************
May 23, 2015 10:46:53 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:46:53 AM [Info ]: StorageService switched off.
May 23, 2015 10:46:53 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:46:53 AM [Info ]: Key Store management switched off.
May 23, 2015 10:46:53 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:46:53 AM [Info ]: WebstartService switched off.
May 23, 2015 10:46:53 AM [Info ]: RoleService switched off.
May 23, 2015 10:46:53 AM [Info ]: AlertService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting NotesService ...
May 23, 2015 10:46:53 AM [Info ]: ProcessService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting MIDService ...
May 23, 2015 10:46:53 AM [Info ]: Starting FileService ...
May 23, 2015 10:46:53 AM [Info ]: LogService switched off.
May 23, 2015 10:46:53 AM [Info ]: MailService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting services ...
May 23, 2015 10:46:53 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:46:53 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:46:53 AM [Info ]: Services started.
May 23, 2015 10:46:53 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:46:53 AM [Info ]: HTTP server started.
May 23, 2015 10:46:53 AM [Info ]: SL Controller started.
May 23, 2015 10:46:53 AM [Info ]: Starting GUI ...
May 23, 2015 10:46:56 AM [Info ]: GUI started.
May 23, 2015 10:47:19 AM [Info ]: *************************************************
May 23, 2015 10:47:19 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:47:19 AM [Info ]: StorageService switched off.
May 23, 2015 10:47:19 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:47:19 AM [Info ]: Key Store management switched off.
May 23, 2015 10:47:20 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:47:20 AM [Info ]: WebstartService switched off.
May 23, 2015 10:47:20 AM [Info ]: RoleService switched off.
May 23, 2015 10:47:20 AM [Info ]: AlertService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting NotesService ...
May 23, 2015 10:47:20 AM [Info ]: ProcessService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting MIDService ...
May 23, 2015 10:47:20 AM [Info ]: Starting FileService ...
May 23, 2015 10:47:20 AM [Info ]: LogService switched off.
May 23, 2015 10:47:20 AM [Info ]: MailService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting services ...
May 23, 2015 10:47:20 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:47:20 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:47:20 AM [Info ]: Services started.
May 23, 2015 10:47:20 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:47:20 AM [Info ]: HTTP server started.
May 23, 2015 10:47:20 AM [Info ]: SL Controller started.
May 23, 2015 10:47:20 AM [Info ]: Starting GUI ...
May 23, 2015 10:47:23 AM [Info ]: GUI started.
May 23, 2015 11:27:57 AM [Info ]: Stopping services ...
May 23, 2015 11:27:57 AM [Info ]: Stopping service "SAPinstService" ...
May 23, 2015 11:27:57 AM [Info ]: Service "SAPinstService" stopped.
May 23, 2015 11:27:57 AM [Info ]: Services stopped.
May 23, 2015 11:27:57 AM [Info ]: Server shutdown by SAPinstService -
Subcontract PO - suppress components.
Hello All,
Is there a way to suppress components from printing on a subcontract PO ouput (NEU)? Our company creates subcontract PO with 250 components. We would like to stop printing the components when PO's are printed. I could not see anything obvious on the Material data tab or settings that prevents list from printing on the NEU ouput.
Thank you for your help.Hi,
As per your requirement you must to take the help of ABPER.Having taken help from them the printing of the material in the PO print preview can be restricted.
Thanks,
Sridhar G -
JStart.exe not started on CE7.2- Node 'bootstrap' failed with exit code 503
Hi,
I installed on SAP Composition Environment 7.2 on Windows7 32bit .
So, once i start the CE1 server from sapmmc the jstart.exe status is 'stopped'. How can i solve this issue that make me can
Thanks for any comments.
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
pid 3492
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sun Jun 19 15:14:34 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F
F Sun Jun 19 15:14:35 2011
F ********************************************************************************
F Java environment properties (C:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 996] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 996] *** LOG => connected to Enqueue Server.
F
F [Thr 996] Sun Jun 19 15:14:48 2011
F [Thr 996] *** LOG => connected to Message Server.
F [Thr 996] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 996] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 996] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;C:\usr\sap\CE1\J00\j2ee\os_libs;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : C:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3768
F ********************************************************************************
F [Thr 996] *** LOG => Process deployment started (pid 3768).
F
F [Thr 996] Sun Jun 19 15:14:56 2011
F [Thr 996] *** LOG => Process deployment stopping (pid 3768).
F
F [Thr 5952] Sun Jun 19 15:14:56 2011
F [Thr 5952] *** LOG => Signal 13 SIGCHLD.
F [Thr 996] *** LOG => Process deployment stopped (pid 3768).
F [Thr 996] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 1 completed.
F [Thr 996] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 996] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;C:\usr\sap\CE1\J00\j2ee\os_libs;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : C:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3776
F ********************************************************************************
F [Thr 996] *** LOG => Process bootstrap started (pid 3776).
F
F [Thr 996] Sun Jun 19 15:15:03 2011
F [Thr 996] *** LOG => Process bootstrap stopping (pid 3776).
F
F [Thr 5316] Sun Jun 19 15:15:03 2011
F [Thr 5316] *** LOG => Signal 13 SIGCHLD.
F [Thr 996] *** LOG => Process bootstrap stopped (pid 3776).
F [Thr 996] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : C:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : C:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3772
F ********************************************************************************
F [Thr 996] *** LOG => Process snapshot started (pid 3772).
F [Thr 996] *** LOG => Process snapshot running (pid 3772).
F
F [Thr 996] Sun Jun 19 15:15:05 2011
F [Thr 996] *** LOG => SAP Start Service (pid 2304) connected.
F [Thr 996] *** LOG => SAP Start Service (pid 2304) disconnected.
F
F [Thr 4340] Sun Jun 19 15:15:13 2011
F [Thr 4340] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 996] Sun Jun 19 15:15:13 2011
F [Thr 996] *** LOG => Process snapshot stopped (pid 3772).
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 2 completed.
F [Thr 996] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 996] MPI: dynamic quotas disabled.
I [Thr 996] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 996] *** LOG => exiting (exitcode 22002, retcode 1).
Edited by: Thongie on Jun 19, 2011 10:21 AM
Edited by: Thongie on Jun 19, 2011 10:26 AMThe lastes log
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
pid 3492
F ********************************************************************************
F Process snapshot started with pid 3772
F ********************************************************************************
F [Thr 996] *** LOG => Process snapshot started (pid 3772).
F [Thr 996] *** LOG => Process snapshot running (pid 3772).
F
F [Thr 996] Sun Jun 19 15:15:05 2011
F [Thr 996] *** LOG => SAP Start Service (pid 2304) connected.
F [Thr 996] *** LOG => SAP Start Service (pid 2304) disconnected.
F
F [Thr 4340] Sun Jun 19 15:15:13 2011
F [Thr 4340] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 996] Sun Jun 19 15:15:13 2011
F [Thr 996] *** LOG => Process snapshot stopped (pid 3772).
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 2 completed.
F [Thr 996] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 996] MPI: dynamic quotas disabled.
I [Thr 996] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 996] *** LOG => exiting (exitcode 22002, retcode 1).
Edited by: Thongie on Jun 19, 2011 10:22 AM
Edited by: Thongie on Jun 19, 2011 10:30 AM -
Chargeable Components and Non-Chargeable Components in Routing
Dear Experts
I am investigating about relationship of Routing and Chargeable Components, Non-Chargeable Components.
Is it possible that one routing has Chargeable Components and Non-Chargeable Components in its task?
Below is instance.
This routing is to manufacture laptop.
10: assemble1 Chargeable Components
20: assemble2 self-manufacture
30: quiality check self-manufacture
40: coating Non-Chargeable Components
50: packaging self-manufacture
If this is possible, please give the information about config and master setting.
Or should I divide the task like below?
To make halfway laptop
10: assemble1 Chargeable Components
To make laptop without packaging
10: assemble2 self-manufacture
20: quiality check self-manufacture
To make laptop with coating
10: coating Non-Chargeable Components
To make completely laptop
10: packaging self-manufacture
Kind regards,Hi,
You can use this Routing
Below is instance.
This routing is to manufacture laptop.
10: assemble1 Chargeable Components
20: assemble2 self-manufacture
30: quiality check self-manufacture
40: coating Non-Chargeable Components
50: packaging self-manufacture
But in THIS Routing , if you check you have the Assembly indicator tick against the operation 10 and 20
If you click over there ,it will go the the assembly Routing for this 10 and 20 operation, since you mentioned as assembly. so the component that you assigned for this operaions are assembly components. -
Subcontracting with slaes order
hi i want to know
how can we do the subcontracting with sales order
i got a process using 311 e movemnt when i search on SDN
plz let me know if this process is correct how can i have subcon challan
Subcontracting scenario(Sale Order wise)
Subcontracting For Sales order.
Subcontract Account assigned PO
how can i create storage loc as vendor
plz help
regards
rajHi,
Subcontracting for Project Stock: -
Purpose: - Subcontracting is also possible in conjunction with Project stocks. The subcontracting orders are account-assigned to a Project. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the Project stock the time of the goods receipt. The material manufactured is also posted to the Project stock.
The cost of subcontracting is then debited to the Project.
Since the components are not transferred to the "stock of material provided to vendor", it is recommended that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the Project stocks.
Features: -
Withdrawal from Stock of Mat. Provided for Project: -
For components that are managed in Project stock, you can define whether the components are to be withdrawn directly from each Project or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from Project stock.
Regarding Subcontracting Challan: -
Go to OMJJ, select the field "movement type" and press enter
Enter movement type "311" and double click on "Field selection (Enjoy)" under Dialog Structure on left side.
here "New Entries" and add field "LIFNR" (Vendor)
Now in MIGO, at the time of transfer posting of components using movement type "311 Q", specify the vendor code of the Subcontracting PO (i.e. Subcontractor)
Now create Subcontracting Challan in J1IF01 for material document of 311 Q movement type.
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0001", Movement Type "311 Q" should be maintained.
Then do GR against PO and refer the Subcontracting Challan here.
And then do reconciliation in J1IFQ for the GR Document against Subcontracting Challan.
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 Q" should be maintained.
Follow the below mentioned process;
Process Steps: -
1. OX09 - Create Storage Location as "9999" for Subcontractor Location
2. MB1B - Do Transfer Posting of material from RM Warehouse to this Storage Location via movement type "311 Q" (Instead of doing 541)
3. Now go to J1IF01 - here use material document of movement type "311 Q" and create Subcontracting challan. (If required)
Prerequisite: - In SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > Here for Movement Type Group "0001" (For issues), maintain movement type "311 Q" also along with 541.
Rest all, refer subcontracting challan during GR and then reconciliation and completion, etc... will be same as usual.
Note: - At the time of GR, consume components from storage location "9999" (for 543 movement type)
Maybe you are looking for
-
Creative cloud app: Installing update: stuck at 2% Message "trying to connect to server"
I've flushed all my browsers cache, Uninstalled the app and re-installed it, cleaned the hosts, checked every single thread available with the same problem... none are solved. web-fonts won't sync until the update happens so I cant really work. This
-
Itunes on my desktop pc won't recognise my itouch but itunes on my laptop will, why ?
Itunes wont see my itouch on my desktop pc, but it works ok on my laptop, I also have two iphones and another ipod on the desktop pc each with its own library, they all work fine, tried uninstalling itunes and reinstalling but no luck. This itouch us
-
Passing XML String via HTTP Sender
Hello everyone, currently we try to find a solution on the following requirement - maybe you have useful advice for us: 8 different business documents can be sent via a web-interface to SAP XI via the http sender adapter. We already have a customized
-
Can I create an action link(drill through) to a Union report
hello experts, Through my summary report I have created an action link to the detail report. My summary report is coming from one subject area; but my detail report is a union of 4 different subject areas. When I click on my action link to do to the
-
Hi, I am trying to create a BDC program to create product hierarchy rebates using VBO1. I have a problem when entering the material for settlement because there is no page down button on the screen just a scroll bar. So if I have a load of conditio