Node not Assign Meassage In RSA5

I have Just Installed SAP BI-7 in my system . When I open the transaction RSA5( installing standard business content data sources) I got an error Node is not assign . Please suggest me.

HI ,
Just download the application componant hierarchy from TCODE : RSA9
goto TCODE :RSA9 --> it will ask do you want to download the application hierarchy --> say yes
Regards,
Sathya

Similar Messages

How to include the not assigned nodes in Hierarchy structure

Hi Experts,
I am running a report which has got Hierarchy variable type. After execution of the query some of the nodes appear always under "not assigned".
Please let me know is it possible to include these not assigned node under hierarchy structure.If so how to do that?
Regards
Kumar

Hi Subbiah.
You can also supress the "not assigned" nodes in the hierarchy maintanence by choosing: Hierarchy attributes -> Supress unassigned nodes.
Hope it helps.
BR
Stefan

GL should not shown in NOT ASSIGNED node in T-Code: F.01

Dear Gurus,
My user don't want to show few GLs in FSV (i.e., in T-Code: F.01), that too in Non Assigned Node also.
Is there any setting for the same?
Regards
JS

There is no setting for that. The only way that I can think of is to put them in the G/L account exclusion list in the selection screen of F.01. Click on Multiple Selection icon next to G/L account from to fields and paste those accounts in Exclude Single Values tab. To get the list of accounts under not assigned node, execute T Code OB58, highlight the financial statement version and click on Fin.statement items button. Now click on Check (Ctrl+F5) icon and carry out the checks to get the list of not assigned accounts at the chart of accounts level or for a specific company code.
Tip: You can create a selection variant for F.01 with the excluded accounts, so you do not have to do this everytime you run F.01.

Urgent Help plzzzzzzzzz Hierarchy in Bex displaying like Not Assigned Mater

Hi Experts,
plz solve my problem like displaying Hierarchy in Bex ,
I loaded hierarchy from R/3 system into Bw 0Mterial.
In Bex 0material Properties I Selected heirachy on Material , this heirarchy having 8 levels,
but in the out put it showing only one level displayng
like Not Assigned Material.
i did all the bex setting well, but i dnot know why i am getting this ...
plz any one help..
Thanks in advance
Anil

Hi Anil,
Your query is built on an infoprovider, right? The way the hierarchy is displayed depends on TRANSACTION DATA IN INFOPROVIDER. To display the hierarchy normally you need to have in the provider not blank values of the characteristics you used in the query and not blank material code. Unassigned node means that this requirement doesn't met.
If would be much more useful if you describe what you have in the query and what - in the provider.
Best regards,
Eugene

Impact of GL's when not assigned to FSV. Where they will be adjusted?

Dear SAP Guru's,
When we take a trial balance through F.01 using a financial statement version which contains some gl accounts which are not assigned to that FSV but contain some balance, the trial balance which is derived is showing a tallied balance sheet. Upon further investigation we found that the same is adjusted under the head "Reverses and surplus - Balance in profit and loss account"
Is it SAP standard. If yes any note is available on this?
Please guide me.
Regards,
Anand.Inguva

Dear Anand.Inguva,
According to [help.sap.com- Special Financial Statement Items node |http://help.sap.com/saphelp_erp60_sp/helpdata/en/96/8b3c2d43ce11d189ee0000e81ddfac/frameset.htm] :
"The balance sheet net result and the P&L statement result are calculated by the program that creates the financial statements. This program also lists, under the item Not assigned, those accounts that could not be assigned to an item in the financial statement version.
The financial statement profit or loss is determined from only those accounts assigned to assets or liabilities. The accounts for the items Financial Statement Notes or Not Assigned are not considered either in the calculation of the retained earnings/net loss or for the P&L result. The balance of all the other accounts produces the P&L statement result."
Hope this helps.
Best regards,
Milen.

"Not Assigned " accounst in FSV

Hello Members
I have some doubts in Preparing Financial statement version.
What is "no assigned " node?
What is the use of it?
There are several accounts i can C but which can be grouped in either assets , liabilities or Pl groups.
If those accounts are there in "not assigned" node how can i group them to other respective nodes?
Regards

ThanX Sridevi
My doubt is still there
In ur previous reply u said that -
" Not assigned node has the GL accounts that are part of CoA, but not included in FSV. If you include such accounts in other nodes, it will not be visible if u run the FSV report"
If i cannot see the accounts in the other nodes even after running the FSV then how i will analyse the value lying in that GL account ? (i ve clearly explained my doubt in previous reply)
can i see the accounts if i move them to diffrent nodes other than "not assigned" node?
Pls Clarify
Regards

DHCP server does not assign IP addresses SG500 firmware 1.3.5

good day collegues
has any of you come across the following issue:
my switch (after upgrading to the newest firmware 1.3.5) does not assign IP addresses to some of the hosts.
after a couple of hours I managed (do not even how) to force my switch to assign IP addresses only to some of the hosts.
still some of them cannot get the IP address and remain with "funny" IP address like i.e. 169.254.100.100
additional info
1. if I boot my switch with the previous version of firmware (1.3.0.6) everything is OK. all my hosts get correct IP addresess
2. the hosts which do not get IP address were perviously entered in stat host table - now removed, ARP cleared, etc, everything many many times rebooted.
I ran out of ideas, could you pleae give me some hints ?
the config below:
config-file-header
SG500
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode router queues-mode 4
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end zzz
no spanning-tree
vlan database
vlan 11,13-14
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
no ip dhcp snooping verify
ip dhcp snooping information option allowed-untrusted
ip dhcp snooping vlan 11
ip dhcp snooping vlan 13
ip dhcp snooping vlan 14
ip arp inspection logging interval infinite
green-ethernet energy-detect
no eee enable
arp timeout 1
ip dhcp server
ip dhcp pool host q409
address 10.10.11.2 255.255.255.0 client-identifier 01:00:08:9b:ac:8f:92
default-router 10.10.11.254
dns-server 10.10.10.1
exit
ip dhcp pool host PCH-100
address 10.10.11.10 255.255.255.0 client-identifier 01:00:06:dc:41:ef:ef
default-router 10.10.11.254
dns-server 10.10.10.1
exit
ip dhcp pool host q209
address 10.10.13.3 255.255.255.0 client-identifier 01:00:08:9b:ac:72:ba
client-name q209
default-router 10.10.13.254
dns-server 8.8.8.8
exit
exit
ip dhcp pool network HOME
address low 10.10.11.1 high 10.10.11.254 255.255.255.0
lease infinite
default-router 10.10.11.254
dns-server 10.10.10.1
exit
ip dhcp pool network GUESTS
address low 10.10.14.1 high 10.10.14.254 255.255.255.0
lease infinite
netbios-node-type b-node
default-router 10.10.14.254
dns-server 10.10.10.1 62.233.233.233
exit
ip dhcp relay address 10.10.10.1
ip dhcp relay address 10.10.11.254
ip dhcp relay address 10.10.13.254
ip dhcp relay address 10.10.14.254
no boot host auto-config
no qos
qos advanced-mode trust dscp
qos wrr-queue wrtd
exit
hostname SG500
line telnet
exec-timeout 0
exit
logging buffered debugging
no logging file
aaa authentication login Telnet local
aaa authentication enable Telnet enable
aaa authentication dot1x default none
line telnet
login authentication Telnet
enable authentication Telnet
password 999 encrypted
exit
no passwords complexity enable
passwords aging 0
username 999 password encrypted 999 privilege 15
ip http timeout-policy 0 http-only
clock timezone " " 1
clock summer-time web recurring eu
clock source sntp
clock source browser
sntp unicast client enable
clock dhcp timezone
ip domain name 999
ip name-server 10.10.10.1 62.233.233.233 8.8.8.8
ip host 999 10.10.13.3
ip telnet server
no service mirror-configuration
no security-suite deny syn-fin
security-suite syn protection mode disabled
interface vlan 1
ip address 10.10.10.254 255.255.255.0
no ip address dhcp
interface vlan 11
name HOME
ip address 10.10.11.254 255.255.255.0
ip dhcp relay enable
interface vlan 13
name DMZ
ip address 10.10.13.254 255.255.255.0
ip dhcp relay enable
interface vlan 14
name GUESTS
ip address 10.10.14.254 255.255.255.0
ip dhcp relay enable
interface gigabitethernet1/10
description "(99) QNAP 409"
switchport trunk native vlan 11
exit
macro auto disabled
macro auto processing type host enabled
macro auto processing type ip_phone disabled
macro auto processing type ip_phone_desktop disabled
macro auto processing type router enabled
mac address-table aging-time 10
ip default-gateway 10.10.10.1
snmp-server set 999 permit

Hi Andbor, please make a backup config of your file, factory reset the switch.
After this, manually configure a DHCP scope without any other configuration.
Just something simple like this
ip dhcp pool network GUESTS
address low 10.10.14.1 high 10.10.14.254 255.255.255.0
lease infinite
netbios-node-type b-node
default-router 10.10.14.254
dns-server 10.10.10.1 62.233.233.233
Verify your machine receive IP address with no other configuration.
In some ways, I'm afraid some of your connections black listed due to the arp inspection.
-Tom
Please mark answered for helpful posts

To display detals of not assigned Costelements in Query

Dear All,
I need to create a query on not assigned costelement hierarchy and broadcast the output through E-mail.
The query I created, displays the not assigned costelements under a separate node (filtered in query as #) but the problem is that the not assigned cost elements appear as u201C#u201D.
I want to get the details of these not assigned cost elements i.e. the query should display which cost elements are not assigned in the hierarchy. I couldnu2019t find the node REST_H (which I believe is created automatically for not assigned elements) in my hierarchy. How do I display the not assigned costelements in my query ?
One way I could think of is to compare the master data table and the hierarchy table of the InfoObject 0Costelement. The entries which are present in the master data table but not in the hierarchy tables are the unassigned costelements I am looking for.
Any standard way or a much simpler way of achieving this ?
Regards
Shalabh Jain

Hi Stefan,
Thanks for the efforts.
But the option "Suppress 'Unassigned' Node" is used to either display not-assigned node or not.
But my requirement is to mandatorily display not-assigned node with the "DETAILS" of not-assigned costelements. I believe that by default the not-assigned costelement appears as # in the query. I want the details...i.e. which costelements are not-assigned.
Regards
Shalabh

I need in Formula Node to assign to the variable value 4000000000!!! What kind of variable it should be???

i've just tryed to write unsigned in32, but it does not understand 'unsogned'... But i need variable to be unsigned, because the max value = 4000000000... So, how can i solve this probleme???

Hi,
I don't see exactly what you're trying to do here.
Where do you want to assign the variable 4000000000 to? If you want it as an
input, just use a dbl, with only zeros behind the coma.
Note that an integer is a number without any decimals. An integer in LabVIEW
is this, but with an extra limitation that it can only be 32 bits... So a
dbl can be an integer.
If the input dbl is not an integer, use round, round to -inf or round to
+inf to make it one. This can also be done if the output needs to be an
integer.Inside the formula node floor(x), int(x), intrz(x) or ceil(x) can be
used to make integers.
I hope this is what you mean... I can't see any problems doing this.
Regards,
Wiebe.
"DrON" wrote in message
news:506500000008000000E
[email protected]..
> I need in Formula Node to assign to the variable value 4000000000!!!
> What kind of variable it should be???
>
> i've just tryed to write unsigned in32, but it does not understand
> 'unsogned'... But i need variable to be unsigned, because the max
> value = 4000000000... So, how can i solve this probleme???

Sales group not assigned to sales office

Hi,
When i tried to create ERP quotation from Opportunity, "Sales group not assigned to Sales Office" error is arised.
With Regards
Selvam T

Hi Selvam,
Check in Opportunity the sales org. u have used. Then go to path: SPRO-> CRM-> Master Data-> Org. Mgmt-> Assignment of Org. units from SAP ECC.
In this node, check the corresponding sales group you are using in ECC and then go to ECC and map the sales office and sales group.
If you dont want to use sales group or sales office then go to tx. PPOMA_CRM in CRM. Select the org. which you are using, then click on Function tab, select Sales radio button and delete the assignment for R/3 sales office and sales group and uncheck them as well.
Let me know in case you need any further information.
Warm Regards,
MG

0ORGUNIT Hierarchy and Not Assigned

Hello Everyone,
I am using 0ORGUNIT and the associated ORGEH hierarchy.
I execute my query with a date of 01/01/2006 - 12/31/2006 and the Org Unit hierarchy display always shows :
Organizational Unit
   Not Assigned Organizational Unit (s)
   1000            Division South
   1001            Division SouthEast
Why do I always get the 'Not Assigned Organizational Unit (s) displayed? Even if I change my date range it doesn't matter.
I did notice that if I go into RSD1 for 0ORGUNIT and maintain hierarchy the short description for this hierarchy is displayed in German. Could this be it? If so, how to translate?
Thank you everyone, Colleen

Hello Ajay,
I just realized it is the REST_H 'Not Assigned' node. I read the documentation on this, but still don't understand fully it's purpose or how to get rid of it.
Your help is appreciated.
Thanks so much, Colleen

To display not assigned Costelements in Query

Dear All,
I need to create a query on not assigned costelement hierarchy and broadcast the output through E-mail.
The query I created, displays the not assigned costelements under a separate node (filtered in query as #) but the problem is that the not assigned cost elements appear as u201C#u201D.
I want to get the details of these not assigned cost elements i.e. the query should display which cost elements are not assigned in the hierarchy. I couldnu2019t find the node REST_H (which I believe is created automatically for not assigned elements) in my hierarchy. How do I display the not assigned costelements in my query ?
One way I could think of is to compare the master data table and the hierarchy table of the InfoObject 0Costelement. The entries which are present in the master data table but not in the hierarchy tables are the unassigned costelements I am looking for.
Any standard way or a much simpler way of achieving this ?
Regards
Shalabh Jain

Hi,
But I believe this setting "Suppress Unassigned nodes" is used to show or hide the unassigned node in the query. It has nothing to do with the display of # value or the actual unassigned costelements.
I want to get the "DETAILS" of the unassigned costelements which are appearing as # in the query.
Regards
Shalabh

InfoObject Z_C_NO is not assigned to an InfoArea

hello expert,
I am trying to load master data attribute through data source but when I do the transformation using info object it shows me error that "InfoObject Z_C_NO is not assigned to an InfoArea".
I have refer this pdf http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1049343f-45bf-2e10-a78f-cc60acda867a?overridelayout=t…
and using this I am trying to load but it shows me error that I mentioned above.
And also give me another ways to load master data attribute as well as text also.
so please help me to solve it...

BB,
It is odd that the objects are not assigned to any infoarea. I don't really understand what steps you took to put yourself into this position. Well, no matter.
Normally when you create a project, you also create a new infoarea in which to store all of the objects that will be used in your project. This makes it easer to locate them later on. Objects that are not specifically assigned to an infoarea are normally found in the "Unassigned Nodes" infoarea. I have never tried to manually assign an object to this infoarea, though, I normally find the objects already there, and assign them to my custom infoarea.
Best Regards,
DB49

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec *

Error while trying to run Bex Query -------- Field symbol is not assigned.

Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveen

can u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too

Node not Assign Meassage In RSA5

Similar Messages

Maybe you are looking for