Node rac disappeared
Hi,
RAC 2 nodes --> 11gr2 (11.2.0.3)
OS= RHEL 5
i was trying to reconfigure RAC because we want to change bond0, bond1 to eth0,eth1. I was following this post:
https://forums.oracle.com/thread/582406
I stopped nodeapps, asm, database and all was ok, but when i was writting the operations in node 1 i had a mistake and wrote "/opt/11.2.0/grid/crs/install/roothas.pl -verbose -deconfig -f" because i used ctrl*v and this sentence i used in other server (nothing to do with this).
The problem now is that when i tried to reconfigure again with "/opt/11.2.0/grid/crs/install/roothas.pl -verbose" i can't :
Using configuration parameter file: ./crsconfig_params
User ignored Prerequisites during installation
The oracle binary is currently linked with RAC enabled.
Please execute the following steps to relink oracle binary
and rerun the command with RAC disabled:
setenv ORACLE_HOME <oracle_restart_home>
cd <oracle_restart_home>/rdbms/lib
make -f ins_rdbms.mk rac_off ioracle
So i tried to run root.sh again to solve it but:
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/grid/crs/install/crsconfig_params
User ignored Prerequisites during installation
Invalid interface. There are more than one interface,
but there is no private interface specified
/u02/app/grid/perl/bin/perl -I/u01/app/grid/perl/lib -I/u01/app/grid/crs/install /u01/app/grid/crs/install/rootcrs.pl execution failed
so i tried to reconfigure network to the initial phase but have the same errors.
someone know how to reconfigure this node?
thanks in advance
Hi JollyRoger,
I tried with rootcrs.pl but not luck:
node 1
[root@XXXX install]# ./rootcrs.pl
Using configuration parameter file: ./crsconfig_params
User ignored Prerequisites during installation
Invalid interface. There are more than one interface,
but there is no private interface specified
so i checked for private interface:
node1 (problematic node)
[root@XXXX bin]# ./oifcfg iflist -p -n
eth4 1x.x.x.x PRIVATE 255.xxx.xxx.x
eth3 1xx.xxx.x.x PRIVATE 255.xxx.xxx.x
eth0 1xx.xxx.xxx.xxx PRIVATE 255.xxx.xxx.xxx
eth1 1x.x.x.x PRIVATE 255.xxx.xxx.x
[root@XXXX bin]# ./oifcfg getif -global
PRIF-10: failed to initialize the cluster registry
node2 (same values like node 1)
[root@xxxx bin]$ ./oifcfg iflist -p -n
eth3 1xx.xxx.x.x PRIVATE 255.xxx.xxx.0
eth4 1x.x.x.x PRIVATE 255.xxx.xxx.0
eth0 1xx.xxx.xxx.xxx PRIVATE 255.xxx.xxx.xxx
eth1 1x.x.x.x PRIVATE 255.xxx.xxx.0
also tried restore CRS but got an error again:
node 1
[root@XXXX bin]# ./ocrconfig -restore /u01/app/grid/cdata/rac/30062013bkp.ocr
PROT-16: Internal Error
Similar Messages
-
Multi-table INSERT with PARALLEL hint on 2 node RAC
Multi-table INSERT statement with parallelism set to 5, works fine and spawns multiple parallel
servers to execute. Its just that it sticks on to only one instance of a 2 node RAC. The code I
used is what is given below.
create table t1 ( x int );
create table t2 ( x int );
insert /*+ APPEND parallel(t1,5) parallel (t2,5) */
when (dummy='X') then into t1(x) values (y)
when (dummy='Y') then into t2(x) values (y)
select dummy, 1 y from dual;
I can see multiple sessions using the below query, but on only one instance only. This happens not
only for the above statement but also for a statement where real time table(as in table with more
than 20 million records) are used.
select p.server_name,ps.sid,ps.qcsid,ps.inst_id,ps.qcinst_id,degree,req_degree,
sql.sql_text
from Gv$px_process p, Gv$sql sql, Gv$session s , gv$px_session ps
WHERE p.sid = s.sid
and p.serial# = s.serial#
and p.sid = ps.sid
and p.serial# = ps.serial#
and s.sql_address = sql.address
and s.sql_hash_value = sql.hash_value
and qcsid=945
Won't parallel servers be spawned across instances for multi-table insert with parallelism on RAC?
Thanks,
MaheshPlease take a look at these 2 articles below
http://christianbilien.wordpress.com/2007/09/12/strategies-for-rac-inter-instance-parallelized-queries-part-12/
http://christianbilien.wordpress.com/2007/09/14/strategies-for-parallelized-queries-across-rac-instances-part-22/
thanks
http://swervedba.wordpress.com -
Multiple copies of same database on a 2 node RAC server - How to merge ?
I currently have multiple copies of the same database running on a 2 node Rac system. I am looking for a way to combine them into 1 large database but keeping the data separate.
The databases are copies of production for testing, development and a yearly "historical" databases .
All the databases are created from production, and generally have the same schema's , tables, procedures, etc however may be different versions and need to be.
Is There a way to use one large database and logically split all the different versions of the same objects into their own space in one database ? The structure cannot change as the database is for a 3rd party's Forms application the relies on the objects not changing names etc.
Ideally I am looking for a solution that will allow the forms application to connect to "test" and "historical" copies of our production database separately in the same database container.
Thanks for any direction.I currently have multiple copies of the same database running on a 2 node Rac system. I am looking for a way to combine them into 1 large database but keeping the data separate.
The databases are copies of production for testing, development and a yearly "historical" databases .
All the databases are created from production, and generally have the same schema's , tables, procedures, etc however may be different versions and need to be.
Is There a way to use one large database and logically split all the different versions of the same objects into their own space in one database ? The structure cannot change as the database is for a 3rd party's Forms application the relies on the objects not changing names etc.
Ideally I am looking for a solution that will allow the forms application to connect to "test" and "historical" copies of our production database separately in the same database container.
Thanks for any direction. -
Multiple databases/instances on 4-node RAC Cluster including Physical Stand
OS: Windows 2003 Server R2 X64
DB: 10.2.0.4
Virtualization: NONE
Node Configuration: x64 architecture - 4-Socket Quad-Core (16 CPUs)
Node Memory: 128GB RAM
We are planning the following on the above-mentioned 4-node RAC cluster:
Node 1: DB1 with instanceDB11 (Active-Active: Load-balancing & Failover)
Node 2: DB1 with instanceDB12 (Active-Active: Load-balancing & Failover)
Node 3: DB1 with instanceDB13 (Active-Passive: Failover only) + DB2 with instanceDB21 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB31 (Active-Active: Load-balancing & Failover) + DB4 with instance41 (Active-Active: Load-balancing & Failover)
Node 4: DB1 with instanceDB14 (Active-Passive: Failover only) + DB2 with instanceDB22 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB32 (Active-Active: Load-balancing & Failover) + DB4 with instance42 (Active-Active: Load-balancing & Failover)
Note: DB1 will be the physical primary PROD OLTP database and will be open in READ-WRITE mode 24x7x365.
Note: DB2 will be a Physical Standby of DB1 and will be open in Read-Only mode for reporting purposes during the day-time, except for 3 hours at night when it will apply the logs.
Note: DB3 will be a Physical Standby of a remote database DB4 (not part of this cluster) and will be mounted in Managed Recovery mode for automatic failover/switchover purposes.
Note: DB4 will be the physical primary Data Warehouse DB.
Note: Going to 11g is NOT an option.
Note: Data Guard broker will be used across the board.
Please answer/advise of the following:
1. Is the above configuration supported and why so? If not, what are the alternatives?
2. Is the above configuration recommended and why so? If not, what are the recommended alternatives?Hi,
As far as i understand, there's nothing wrong in configuration except you need to consider below points while implementing final design.
1. No of CPU on each servers
2. Memory on each servers
3. If you've RAC physical standby then apply(MRP0) will run on only one instance.
4. Since you are configuring physical standby for on 3rd and 4th nodes of DB1 4 node cluster where DB13 and DB14 instances are used only for failver, if you've a disaster at data center or power failure in entire data center, you are losing both primary and secondary with an assumption that your primary and physical standby reside in same data center so it may not be highly available architecture. If you are going to use extended RAC for this configuration then it makes sense where Node 1 and Node 2 will reside in Datacenter A and Node 3 ,4 will reside in Datacenter B.
Thanks,
Keyur -
Hi,
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5
RMAN duplicate is causing problem with network and we decided to go for manual creation of the same.
Thanks in Advance..Hi;
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5I had similar issue, what i did
1. Used source oracle_home on standby server
2. Created new asm instance and use same naming
3. I took RMAN full backup on source and move it to target
4. I edit initora file remove RAC setting and restore db(also edited listener file)
Regard
Helios -
ORACLE 10G 2 Node RAC on servers AB to 3 node 11GR2 RAC on new servers XYZ
Hi Gurus ,
We have a business requirement to upgrade existing oracle 10.2.0.4 2 Node RAC on servers A,B (HP UX 11.31 ) to 3 Node ORACLE 11GR2 on new Servers X,Y and Z(Linux and servers are from different vendor)
We don't have ASM.We have RAW file system
Now this has to be done with near zero down time.This is a very busy OLTP System.Golden Gate is not an option as Management is not going for it this time.
Storage is same for everything.I am thinking of the following ways.Please let me know if you have any better plan or if you want to correct my existing plan
Initially i thought of this way and i immediately answered myself
Plan A
1 ) Storage copy (BC etc..) exising 10g RAC Database files on A,B to new volumes allocated to Servers X,Y and Z ( I don't think it's possible as OS is different.I am not sure whether copying this way is possible or not , even if possible i am not sure whether new OS can identify these files or not)
2 ) upgrade 2 Node 10.2.0.4 on X,Y to 11GR2 .
3 ) Add a Database Node on Z
Plan B is
1) Build 3 Node brand new 11GR2 on X,Y and Z
2 ) Plan for how can you replicate the data ( This has to be a logical way)
a ) RMAN - Very time consuming as this is >50 TB Database
b) Golden Gate - Not an option.Even if we can use it , i see there are so many logical issues with golden gate
c) Expdp/impdp - forget about it :)
d) physical standby (Versions are different.If it is same version and Same OS then would have been best bet)
What would be the ideal way to do this with minium down time and with out golden gate
I think something can be done on the lines of PLAN A itself.
Requesting your help Gurus
ThanksHi,
Have you considered possibility to setup a logical standby and do rolling upgrade ?
Please have a look at the following:
1) http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-transientlogicalrollingu-1-131927.pdf
2) http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-upgrades-made-easy-131972.pdf
If you can practice on test setup, it looks a faster option than the others.
Regards,
Ganadeva -
Hi We are in the process of converting single instance database(11gr2) supporting EBS 12.1.3 to 2 node RAC on RHEL. Which version of RHEL is better? if its 6.x then x?? The oracle document only says RHEL update 6.
thanks in advance.Hi,
Yes you can use any version but i recommend you to use 6.2
Also refer my post for RAC migration in EBS
Apps DBA Workshop: Using 11gR2 RAC with Oracle Applications R12.1.1
Hope this helps
thanks,
X A H E E R -
11gR2- webutil upload file to AS on two nodes RAC?
Hellow experts plz help with the following issue,
we are using 11gR2 forms on two node rac,webutil configured on both nodes. upload/download files to AS folder(UP_FILES) using our forms. node 2 is actually replica of node 1(forms,reports,UP_FILES). we are now facing a problem that the form which upload file to AS, only upload that to the node from where it is running say if it is running from node1 then it upload files to folder UP_FILES on that node( as the entry in webutil.cfg file) but we want that UP_FILES folder should be synced with each other on both nodes and a form running whether from node1 or node2 upload the file to both nodes at time.
How this will be accomplished?
--------webutil.cfg entry
transfer.appsrv.read.3=D:\UP_FILES
transfer.appsrv.write.3=D:\UP_FILES
-----FORM UPLOAD CODE
IF :CONTROL.FILE_LOC IS NOT NULL THEN
acyr3 := :CONTROL.TXTVOUCHERNO||'-'||acyr2 ;
FILE_RESULT := WEBUTIL_FILE_TRANSFER.CLIENT_TO_AS_WITH_PROGRESS(CLIENTFILE=>:CONTROL.FILE_LOC,
SERVERFILE =>'D:\UP_FILES\'||acyr3||'.PDF',
PROGRESSTITLE=>'UPLOAD TO DATABASE IN PROGRESS',
PROGRESSSUBTITLE=>'PLEASE WAIT' );
END IF;
--FORM DOWNLOAD CODE
FILE_RESULT := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
CLIENTFILE=>'D:\UP_FILES\'||acyr3||'.PDF',
SERVERFILE =>'D:\UP_FILES\'||acyr3||'.PDF',
PROGRESSTITLE=>'DOWNLOAD FROM DATABASE IN PROGRESS',
PROGRESSSUBTITLE=>'PLEASE WAIT'
CLIENT_HOST('rundll32.exe url.dll,FileProtocolHandler D:\UP_FILES\'||acyr3||'.PDF');
IF FILE_RESULT THEN
message('File downloaded successfully from the Application Server');
END IF;Well, you're uploading the file to one node, so this is no surprise. What you can do is to store your file on a shared folder (which might be a bit tricky on windows) or synchronize a folder between your nodes. Unfortunately Forms can't access ASM directly (assuming you are using ASM), so you can't store your files directly in ASM where it would be accessible from both nodes.
cheers -
How to add a second database along with existing two node RAC environment
Hi,
I was wondering if anyone can help me with this.
My Environment:
1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
3. Database is up and running, but I am not able to connect it from any client.
4. I am getting ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
5. Database (test2) is registered with grid LISTENER
5. TNSPING from client machine response is ok
Am I missing something here, happy to provide more info if requested.
Thanks,
PSC:\Users\root.test_prod>lsnrctl
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Start Date 18-FEB-2012 19:51:47
Uptime 4 days 16 hr. 6 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1322 refused:0 state:ready
LOCAL SERVER
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
The command completed successfully
LSNRCTL> -
How to create second database at ASM in 4 node RAC system
Hi Experts,
we use 4 nodes RAC (11.0.1) with 10.2.0. 4 database in red hat5.0
we want to add second database at ASM in RAC system based on manager decision.
how do I add second database in ASM with exist database?
Do I need to created new ASM insatnce?
how to create two new diskgroup? is it under existing ASM instance or new ASM instance?
how to reset ASM properity to support ( or new) ASM instance and two database?
Do I need to configure AMS again after added more space into ASM?
I could not find ducument that add seconf database into ASM in RAC system.
I want add second database by dbca. any experience for add second database in ASM RAC ?
Thanks for help!
JImHi... I'm in the same situation.
I need to add a new second database on a RAC installation based on already available ASM instance.
I'm using 11gR2.
I read your suggested documentation. Then I typed asmca and analyzed my asm configuration:
As you can see I have a DISK GROUP NAME with several FREE space.
!http://img522.yfrog.com/img522/8405/dbca20100203173248.jpg!
If I select Volumes tab the following is my current configuration:
!http://img682.yfrog.com/img682/562/dbca20100203173343.jpg!
Selecting Create button, I can insert some values as you can see:
!http://img403.yfrog.com/img403/9889/dbca20100203173403.jpg!
First question:
Is this the right way to create space for a new database ? Consider that running dbca.. no DISK GROUP NAME is available.
Second question:
When I created my first database on this DISK GROUP NAME no volumes were created. Why now I have to do it ? Is this necessary to really separate datafiles coming from different databases ? -
When we create one service as preferred on both nodes in two node RAC
How to configure listener,tnsnames.ora & listener file When we create one service as preferred on both nodes in two node RAC ... ( I don't need load balancing here but i just want to create service as preferred on both nodes)
please some one help me in this ..Thanks alot Sebastain for your reply..
I am using 10.2.0.4 version and below tns entry is from my client side tns entry ..
M4AMPRD_TEST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.228) (PORT=1521))
(ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.229) (PORT=1521))
(FAILOVER=ON)
(CONNECT_DATA=(SERVICE_NAME=M4AMPRD_TEST)
(FAILOVER_MODE=
(TYPE=SELECT)
(METHOD=BASIC)
(RETRIES=20)
(DELAY=5)
service creation: srvctl add service -d M4AMPRD -s M4AMPRD_TEST -r M4AMPRD1,M4AMPRD2
But when i connect to database usign above service from client some times its working fine and some times its failing please see below log with timings how it is behaving ..
SQL> set time on
18:39:46 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:48 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Warning: You are no longer connected to ORACLE.
18:39:52 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:53 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:55 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:57 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Warning: You are no longer connected to ORACLE.
18:39:59 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
Thanks for your help in advance
Anil Vejendla.. -
GLOBAL_NAMES setting in 4 nodes RAC
Hi Experts,
I have a 4 nodes RAC with 10.2.0.4 database at red hat 5.1
I find that global_name is nor enforced as
NAME VALUE
global_names FALSE
For stream, I need to change to true.
I want to know which default value for global_name at RAC.
If I change to TRUE and enforce global_nmae. does this changes affects RAC system or some RAC function?
Thanks for help!
JimHello Jim,
Global_Name will not effect anything at the RAC level. This only effects db link name. you have to have use dbname as DB link.
As per best practices document and other streams documentation .. Global_Name should be true. I have tested this. i have made this parameter false however i have created db link used by streams is same as database name which satisfies mandate requirement for streams. because i had to create one more database link in another schema in same database and this was only option.
So in a nutshell.. Global_names enforces dblink name same as dbname. you have a workaround.
Feel free to give it a go.
Thanks
Prashant -
Processes in v$process that do not exist in v$session (2 node RAC)!
Hi, all.
The database is 2 node RAC database (10.2.0.2.0)
on 32 bit windows 2003 EE SP1.
Our database is suffering "CKPT hang" from time to time.
I checked v$process and v$session on both node by the following sql.
select addr,pid,spid,username, program
from v$process
where addr not in (select paddr from v$session)
ADDR PID SPID USERNAME PROGRAM
56E2 1 PSEUDO
56E2 18 3984 SYSTEM ORACLE.EXE (D000)
56E2 19 4020 SYSTEM ORACLE.EXE (S000)
56E2 27 3176 SYSTEM ORACLE.EXE (PZ99)
56E3 39 2296 SYSTEM ORACLE.EXE (PZ97)
●select * from v$px_process
SERVER_NAME STATUS PID SPID SID SERIAL#
PZ97 AVAILABLE 39 2296
PZ99 AVAILABLE 27 3176
●select * from V$PX_SESSION
--> no rows
●select slave_name,status from v$pq_slave
SLAVE_NAME STATUS
PZ97 IDLE
PZ99 IDLE
I found the above processes which do not exist in v$session.
Is this normal??
Thanks and Regards.you see nothing in v$session because there is nothing to see ...
the Parallel servers are AVAILABLE , ie no session are running parallel executions (as shown in V$PX_SESSION)
PID is not SID -
Single instance standby for 2-node RAC
Hi,
Oracle Version:11.2.0.1
Operating system:Linux
Here i am planing to create single instance standby for my 2-node RAC database.Here i am creating my single instance standby database on 1-node of my 2-node RAC DB.
1.) Do i need to configure any separate listener for my single instance standby in $ORACLE_HOME/network/admin in ORACLE user or need to change in Grid user login.
2.) Below is the error when i am duplicating my primary 2-Node RAC to single instance DB. And it is shutting down my auxiliary instance.
[oracle@rac1 ~]$ rman target / auxiliary sys/racdba123@stand
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Aug 28 13:32:29 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RACDB (DBID=755897741)
connected to auxiliary database: RACDB (not mounted)
RMAN> duplicate database racdba to stand
2> ;
Starting Duplicate Db at 28-AUG-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=6 device type=DISK
contents of Memory Script:
sql clone "create spfile from memory";
executing Memory Script
sql statement: create spfile from memory
contents of Memory Script:
shutdown clone immediate;
startup clone nomount;
executing Memory Script
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/28/2011 13:33:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptorAlso find my listener services.
[oracle@rac1 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-AUG-2011 10:56:24
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 18-AUG-2011 10:35:07
Uptime 11 days 0 hr. 21 min. 17 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/rac1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.8.123)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.8.127)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "RACDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Service "RACDBXDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Service "stand" has 2 instance(s).
Instance "stand", status UNKNOWN, has 1 handler(s) for this service...
Instance "stand", status BLOCKED, has 1 handler(s) for this service...
Service "testdb" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Service "testdb1" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@rac1 ~]$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-AUG-2011 10:56:35
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "RACDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "RACDBXDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: rac1.qfund.net, pid: 3975>
(ADDRESS=(PROTOCOL=tcp)(HOST=rac1.qfund.net)(PORT=43731))
Service "stand" has 2 instance(s).
Instance "stand", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "stand", status BLOCKED, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:669 refused:0 state:ready
LOCAL SERVER
Service "testdb" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "testdb1" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
The command completed successfully
[oracle@rac1 ~]$Tnsnames.ora file content.
RACDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = racdb-scan.qfund.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACDB)
#QFUNDRAC =
stand =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST= racdb-scan.qfund.net)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = stand)
(UR = A)
)Please help me how to solve this problem.
Thanks & Regards,
Poorna Prasad.SHi,
Please find the output from v$dataguard_status from primary and standby
Primary
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARCH: LGWR is scheduled to archive destination LOG_ARCHIVE_DEST_2 after log swit
ch
ARCH: Beginning to archive thread 1 sequence 214 (4604093-4604095)
Error 12514 received logging on to the standby
ARCH: Error 12514 Creating archive log file to 'stand'
ARCH: Completed archiving thread 1 sequence 214 (4604093-4604095)
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
MESSAGE
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
MESSAGE
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
MESSAGE
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
ARC7: Beginning to archive thread 1 sequence 215 (4604095-4604191)
ARC7: Completed archiving thread 1 sequence 215 (4604095-4604191)
ARC5: Beginning to archive thread 1 sequence 216 (4604191-4604471)
ARC5: Completed archiving thread 1 sequence 216 (4604191-4604471)
ARCt: Archival started
MESSAGE
ARC3: Beginning to archive thread 1 sequence 217 (4604471-4605358)
ARC3: Completed archiving thread 1 sequence 217 (4604471-4605358)
LNS: Standby redo logfile selected for thread 1 sequence 217 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 217
LNS: Completed archiving log 1 thread 1 sequence 217
LNS: Standby redo logfile selected for thread 1 sequence 218 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 218
MESSAGE
LNS: Completed archiving log 2 thread 1 sequence 218
ARC4: Beginning to archive thread 1 sequence 218 (4605358-4625984)
ARC4: Completed archiving thread 1 sequence 218 (4605358-4625984)
LNS: Standby redo logfile selected for thread 1 sequence 219 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 219
LNS: Completed archiving log 1 thread 1 sequence 219
ARC5: Beginning to archive thread 1 sequence 219 (4625984-4641358)
ARC5: Completed archiving thread 1 sequence 219 (4625984-4641358)
LNS: Standby redo logfile selected for thread 1 sequence 220 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 220
LNS: Completed archiving log 2 thread 1 sequence 220
ARC6: Beginning to archive thread 1 sequence 220 (4641358-4644757)
ARC6: Completed archiving thread 1 sequence 220 (4641358-4644757)
LNS: Standby redo logfile selected for thread 1 sequence 221 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 221
LNS: Completed archiving log 1 thread 1 sequence 221
MESSAGE
ARC7: Beginning to archive thread 1 sequence 221 (4644757-4648306)
ARC7: Completed archiving thread 1 sequence 221 (4644757-4648306)
LNS: Standby redo logfile selected for thread 1 sequence 222 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 222
LNS: Completed archiving log 2 thread 1 sequence 222
ARC8: Beginning to archive thread 1 sequence 222 (4648306-4655287)
ARC8: Completed archiving thread 1 sequence 222 (4648306-4655287)
LNS: Standby redo logfile selected for thread 1 sequence 223 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 223
LNS: Completed archiving log 1 thread 1 sequence 223
ARC9: Beginning to archive thread 1 sequence 223 (4655287-4655307)
ARC9: Completed archiving thread 1 sequence 223 (4655287-4655307)
LNS: Standby redo logfile selected for thread 1 sequence 224 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 224
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
MESSAGE
Error 3135 for archive log file 2 to 'stand'
LNS: Failed to archive log 2 thread 1 sequence 224 (3135)
ARC3: Beginning to archive thread 1 sequence 224 (4655307-4660812)
ARC3: Completed archiving thread 1 sequence 224 (4655307-4660812)
LNS: Standby redo logfile selected for thread 1 sequence 224 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 224
LNS: Completed archiving log 2 thread 1 sequence 224
LNS: Standby redo logfile selected for thread 1 sequence 225 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 225
LNS: Completed archiving log 1 thread 1 sequence 225
ARC4: Beginning to archive thread 1 sequence 225 (4660812-4660959)
ARC4: Completed archiving thread 1 sequence 225 (4660812-4660959)
LNS: Standby redo logfile selected for thread 1 sequence 226 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 226
LNS: Completed archiving log 2 thread 1 sequence 226
ARC5: Beginning to archive thread 1 sequence 226 (4660959-4664925)
MESSAGE
LNS: Standby redo logfile selected for thread 1 sequence 227 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 227
ARC5: Completed archiving thread 1 sequence 226 (4660959-4664925)
LNS: Completed archiving log 1 thread 1 sequence 227
LGWR: Error 1089 closing archivelog file 'stand'
ARC6: Beginning to archive thread 1 sequence 227 (4664925-4668448)
ARC6: Completed archiving thread 1 sequence 227 (4664925-4668448)
ARC5: Beginning to archive thread 1 sequence 228 (4668448-4670392)
ARC5: Completed archiving thread 1 sequence 228 (4668448-4670392)
MESSAGE
LNS: Standby redo logfile selected for thread 1 sequence 228 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 228
LNS: Completed archiving log 2 thread 1 sequence 228
ARC4: Standby redo logfile selected for thread 1 sequence 227 for destination LO
G_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 229 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 229
LNS: Completed archiving log 1 thread 1 sequence 229
ARC3: Beginning to archive thread 1 sequence 229 (4670392-4670659)
ARC3: Completed archiving thread 1 sequence 229 (4670392-4670659)
LNS: Standby redo logfile selected for thread 1 sequence 230 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 230
LNS: Completed archiving log 2 thread 1 sequence 230
ARC4: Beginning to archive thread 1 sequence 230 (4670659-4670679)
ARC4: Completed archiving thread 1 sequence 230 (4670659-4670679)
MESSAGE
LNS: Standby redo logfile selected for thread 1 sequence 231 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 231
LNS: Completed archiving log 1 thread 1 sequence 231
ARC5: Beginning to archive thread 1 sequence 231 (4670679-4690371)
ARC5: Completed archiving thread 1 sequence 231 (4670679-4690371)
LNS: Standby redo logfile selected for thread 1 sequence 232 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 232
MESSAGE
LNS: Completed archiving log 2 thread 1 sequence 232
ARC6: Beginning to archive thread 1 sequence 232 (4690371-4712566)
ARC6: Completed archiving thread 1 sequence 232 (4690371-4712566)
LNS: Standby redo logfile selected for thread 1 sequence 233 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 233
LNS: Completed archiving log 1 thread 1 sequence 233
ARC7: Beginning to archive thread 1 sequence 233 (4712566-4731626)
LNS: Standby redo logfile selected for thread 1 sequence 234 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 2 thread 1 sequence 234
ARC7: Completed archiving thread 1 sequence 233 (4712566-4731626)
LNS: Completed archiving log 2 thread 1 sequence 234
ARC8: Beginning to archive thread 1 sequence 234 (4731626-4753780)
LNS: Standby redo logfile selected for thread 1 sequence 235 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 235
ARC8: Completed archiving thread 1 sequence 234 (4731626-4753780)
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
MESSAGE
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3135 for archive log file 1 to 'stand'
LNS: Failed to archive log 1 thread 1 sequence 235 (3135)
ARC9: Beginning to archive thread 1 sequence 235 (4753780-4765626)
ARC9: Completed archiving thread 1 sequence 235 (4753780-4765626)
LNS: Standby redo logfile selected for thread 1 sequence 235 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 235
LNS: Completed archiving log 1 thread 1 sequence 235
LNS: Standby redo logfile selected for thread 1 sequence 236 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 236
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3135 for archive log file 2 to 'stand'
LNS: Failed to archive log 2 thread 1 sequence 236 (3135)
ARCa: Beginning to archive thread 1 sequence 236 (4765626-4768914)
ARCa: Completed archiving thread 1 sequence 236 (4765626-4768914)
LNS: Standby redo logfile selected for thread 1 sequence 236 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 2 thread 1 sequence 236
LNS: Completed archiving log 2 thread 1 sequence 236
LNS: Standby redo logfile selected for thread 1 sequence 237 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 237
LNS: Completed archiving log 1 thread 1 sequence 237
ARCb: Beginning to archive thread 1 sequence 237 (4768914-4770603)
ARCb: Completed archiving thread 1 sequence 237 (4768914-4770603)
LNS: Standby redo logfile selected for thread 1 sequence 238 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 238
LNS: Completed archiving log 2 thread 1 sequence 238
ARCc: Beginning to archive thread 1 sequence 238 (4770603-4770651)
ARCc: Completed archiving thread 1 sequence 238 (4770603-4770651)
LNS: Standby redo logfile selected for thread 1 sequence 239 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 239
LNS: Completed archiving log 1 thread 1 sequence 239
MESSAGE
ARCd: Beginning to archive thread 1 sequence 239 (4770651-4773918)
ARCd: Completed archiving thread 1 sequence 239 (4770651-4773918)
LNS: Standby redo logfile selected for thread 1 sequence 240 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 240
LNS: Completed archiving log 2 thread 1 sequence 240
ARCe: Beginning to archive thread 1 sequence 240 (4773918-4773976)
ARCe: Completed archiving thread 1 sequence 240 (4773918-4773976)
LNS: Standby redo logfile selected for thread 1 sequence 241 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 241
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3135 for archive log file 1 to 'stand'
LNS: Failed to archive log 1 thread 1 sequence 241 (3135)
ARC3: Beginning to archive thread 1 sequence 241 (4773976-4774673)
ARC3: Completed archiving thread 1 sequence 241 (4773976-4774673)
LNS: Standby redo logfile selected for thread 1 sequence 241 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 241
LNS: Completed archiving log 1 thread 1 sequence 241
LNS: Standby redo logfile selected for thread 1 sequence 242 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 242
LNS: Completed archiving log 2 thread 1 sequence 242
ARC4: Beginning to archive thread 1 sequence 242 (4774673-4776045)
ARC4: Completed archiving thread 1 sequence 242 (4774673-4776045)
LNS: Standby redo logfile selected for thread 1 sequence 243 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 243
LNS: Completed archiving log 1 thread 1 sequence 243
ARC5: Beginning to archive thread 1 sequence 243 (4776045-4776508)
ARC5: Completed archiving thread 1 sequence 243 (4776045-4776508)
LNS: Standby redo logfile selected for thread 1 sequence 244 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 244
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
MESSAGE
Error 3135 for archive log file 2 to 'stand'
LNS: Failed to archive log 2 thread 1 sequence 244 (3135)
ARC6: Beginning to archive thread 1 sequence 244 (4776508-4778741)
ARC6: Completed archiving thread 1 sequence 244 (4776508-4778741)
ARC7: Beginning to archive thread 1 sequence 245 (4778741-4778781)
ARC7: Completed archiving thread 1 sequence 245 (4778741-4778781)
ARC8: Beginning to archive thread 1 sequence 246 (4778781-4778787)
ARC8: Completed archiving thread 1 sequence 246 (4778781-4778787)
ARC9: Standby redo logfile selected for thread 1 sequence 244 for destination LO
G_ARCHIVE_DEST_2
MESSAGE
ARC3: Beginning to archive thread 1 sequence 247 (4778787-4778934)
LNS: Standby redo logfile selected for thread 1 sequence 247 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 247
ARC3: Completed archiving thread 1 sequence 247 (4778787-4778934)
LNS: Completed archiving log 1 thread 1 sequence 247
LNS: Standby redo logfile selected for thread 1 sequence 248 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 248
MESSAGE
ARC4: Beginning to archive thread 1 sequence 248 (4778934-4781018)
LNS: Completed archiving log 2 thread 1 sequence 248
ARC4: Completed archiving thread 1 sequence 248 (4778934-4781018)
LNS: Standby redo logfile selected for thread 1 sequence 249 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 249
LNS: Completed archiving log 1 thread 1 sequence 249
ARC5: Beginning to archive thread 1 sequence 249 (4781018-4781033)
ARC5: Completed archiving thread 1 sequence 249 (4781018-4781033)
LNS: Standby redo logfile selected for thread 1 sequence 250 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 250
233 rows selected.
SQL>Standby
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
MESSAGE
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
MESSAGE
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC2: Becoming the heartbeat ARCH
Error 1017 received logging on to the standby
FAL[client, ARC2]: Error 16191 connecting to RACDB for fetching gap sequence
MESSAGE
ARCt: Archival started
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery starting Real Time Apply
Media Recovery Log /u02/stand/archive/1_119_758280976.arc
Media Recovery Waiting for thread 2 sequence 183
RFS[1]: Assigned to RFS process 30110
RFS[1]: Identified database type as 'physical standby': Client is ARCH pid 25980
RFS[2]: Assigned to RFS process 30118
RFS[2]: Identified database type as 'physical standby': Client is ARCH pid 26008
RFS[3]: Assigned to RFS process 30124
MESSAGE
RFS[3]: Identified database type as 'physical standby': Client is ARCH pid 26029
RFS[4]: Assigned to RFS process 30130
RFS[4]: Identified database type as 'physical standby': Client is ARCH pid 26021
ARC4: Beginning to archive thread 1 sequence 244 (4776508-4778741)
ARC4: Completed archiving thread 1 sequence 244 (0-0)
RFS[5]: Assigned to RFS process 30144
RFS[5]: Identified database type as 'physical standby': Client is LGWR ASYNC pid
26128
Primary database is in MAXIMUM PERFORMANCE mode
ARC5: Beginning to archive thread 1 sequence 247 (4778787-4778934)
MESSAGE
ARC5: Completed archiving thread 1 sequence 247 (0-0)
ARC6: Beginning to archive thread 1 sequence 248 (4778934-4781018)
ARC6: Completed archiving thread 1 sequence 248 (0-0)
ARC7: Beginning to archive thread 1 sequence 249 (4781018-4781033)
ARC7: Completed archiving thread 1 sequence 249 (0-0)
58 rows selected.
SQL>also find the output for the primary alertlog file.
Tue Aug 30 10:45:41 2011
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
ORA-03135: connection lost contact
Error 3135 for archive log file 2 to 'stand'
Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
ORA-03135: connection lost contact
LNS: Failed to archive log 2 thread 1 sequence 244 (3135)
Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
ORA-03135: connection lost contact
Tue Aug 30 10:50:25 2011
Thread 1 advanced to log sequence 245 (LGWR switch)
Current log# 1 seq# 245 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 245 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Tue Aug 30 10:50:25 2011
Archived Log entry 612 added for thread 1 sequence 244 ID 0x2d0e0689 dest 1:
Thread 1 cannot allocate new log, sequence 246
Checkpoint not complete
Current log# 1 seq# 245 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 245 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Thread 1 advanced to log sequence 246 (LGWR switch)
Current log# 2 seq# 246 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 246 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Tue Aug 30 10:50:27 2011
Archived Log entry 613 added for thread 1 sequence 245 ID 0x2d0e0689 dest 1:
Thread 1 cannot allocate new log, sequence 247
Checkpoint not complete
Current log# 2 seq# 246 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 246 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Thread 1 advanced to log sequence 247 (LGWR switch)
Current log# 1 seq# 247 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 247 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Tue Aug 30 10:50:30 2011
Archived Log entry 614 added for thread 1 sequence 246 ID 0x2d0e0689 dest 1:
Tue Aug 30 10:51:37 2011
ARC9: Standby redo logfile selected for thread 1 sequence 244 for destination LOG_ARCHIVE_DEST_2
Tue Aug 30 10:51:39 2011
Thread 1 advanced to log sequence 248 (LGWR switch)
Current log# 2 seq# 248 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 248 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Tue Aug 30 10:51:39 2011
Archived Log entry 620 added for thread 1 sequence 247 ID 0x2d0e0689 dest 1:
Tue Aug 30 10:51:39 2011
LNS: Standby redo logfile selected for thread 1 sequence 247 for destination LOG_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 248 for destination LOG_ARCHIVE_DEST_2
Tue Aug 30 11:08:27 2011
Thread 1 advanced to log sequence 249 (LGWR switch)
Current log# 1 seq# 249 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 249 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Tue Aug 30 11:08:27 2011
Archived Log entry 622 added for thread 1 sequence 248 ID 0x2d0e0689 dest 1:
Tue Aug 30 11:08:27 2011
LNS: Standby redo logfile selected for thread 1 sequence 249 for destination LOG_ARCHIVE_DEST_2
Thread 1 cannot allocate new log, sequence 250
Checkpoint not complete
Current log# 1 seq# 249 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 249 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Thread 1 advanced to log sequence 250 (LGWR switch)
Current log# 2 seq# 250 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 250 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Tue Aug 30 11:08:31 2011
Archived Log entry 624 added for thread 1 sequence 249 ID 0x2d0e0689 dest 1:
LNS: Standby redo logfile selected for thread 1 sequence 250 for destination LOG_ARCHIVE_DEST_2Thanks & Regards,
Poorna Prasad.S -
OEM Issue: oemagent stops after some time on specific node on a 3 node RAC system.
We have a 3 node RAC system running 11.2.0.3 .
The oemagent keeps failing on 1 particular node and needs to be brought up every now and then. What could be the probable cause of this. Also, I have not seen anything suspicious in the agent logs.
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.2.0
OMS Version : 12.1.0.2.0
Protocol Version : 12.1.0.1.0
Last successful upload : 2015-03-10 07:28:10
Last attempted upload : 2015-03-10 07:28:10
Total Megabytes of XML files uploaded so far : 0.08
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 78.16%
Collection Status : Collections enabled
Heartbeat Status : Ok
Last attempted heartbeat to OMS : 2015-03-10 07:28:25
Last successful heartbeat to OMS : 2015-03-10 07:28:25
Next scheduled heartbeat to OMS : 2015-03-10 07:29:25
Agent is Running and Ready
Sometimes while checking status we often get the followinG:
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Status agent Failure:unable to connect to http server at https://<servername>:<port>/emd/lifecycle/main/ [peer not authenticated]
Agent is Not Running
Any help?We have a 3 node RAC system running 11.2.0.3 .
The oemagent keeps failing on 1 particular node and needs to be brought up every now and then. What could be the probable cause of this. Also, I have not seen anything suspicious in the agent logs.
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.2.0
OMS Version : 12.1.0.2.0
Protocol Version : 12.1.0.1.0
Last successful upload : 2015-03-10 07:28:10
Last attempted upload : 2015-03-10 07:28:10
Total Megabytes of XML files uploaded so far : 0.08
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 78.16%
Collection Status : Collections enabled
Heartbeat Status : Ok
Last attempted heartbeat to OMS : 2015-03-10 07:28:25
Last successful heartbeat to OMS : 2015-03-10 07:28:25
Next scheduled heartbeat to OMS : 2015-03-10 07:29:25
Agent is Running and Ready
Sometimes while checking status we often get the followinG:
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Status agent Failure:unable to connect to http server at https://<servername>:<port>/emd/lifecycle/main/ [peer not authenticated]
Agent is Not Running
Any help?
Maybe you are looking for
-
i logged onto itunes and went to MUSIC under library and no music came up. I know that i have music on my ipod though because it shows up on my ipod. I am trying to delete that music. How do i do this??
-
Prevent double click / double submit
Hi, I have a JSP with some input fields and some command buttons within a form. When the user clicks twice on one of the buttons two requests (including the form data) are sent. In the server side this results in unpredictable behvior of my business
-
can anyone help me asap
-
I used to be able to facetime on my IPad and I Phone and then I changed my apple ID and now I can not. It says facetime failed. I followed Apple check list for trouble shooting but nothing has worked Can anyone plese help?
-
Problem in loading images in JSP
Hi My JSP page is loading few gif images. I am running tomcat 4 connected to apache 1.3.22 using MOD_WEBAPP connector. My JSP file loads perfectly alright when I load it directly from tomcat server that is port 8080. But when I load it from apache th