NODEAPPS FAILURE FOR IPMP ON SOLARIS LOCAL CONTAINER

Hi everyone,
I want to setup an two node RAC (oracle 11.2.0.2) in a Solaris container 3.3.
though it was certified recently I am facing issues while running the root.sh in node 1 and node 2.
/u01/app/11.2.0/grid/bin/srvctl start nodeapps -n cbq2-svu-istdb-n1 ... failed
FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 8388.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
Can you please help me out to fix it
FYI
My cluvfy precheck was successfull
./runcluvfy.sh stage -pre crsinst -n cbq2-svu-istdb-n1,cbq2-svu-istdb-n2 -verbose
Pre-check for cluster services setup was successful.
Thanks
Surendran

Thanks for the notice, been waiting for that one!

Similar Messages

Sunwj3rtx JDK 1.4.2 64 bit for Solaris 10 Container

Hi,
does anybody know where I ca get the sunwj3rtx and similar other Solaris 10 packages for the x86 / 64 bit platform. I need the EOL Java 1.4 because I want to install a SAP application and these applications accept only the jdk 1.4.2. Maybe there is a 64bit installer version, which would be fine too. The downloadable version from java.sun.com is only 32bit which doesnt work.
Any hints are welcome.
Regards
Martin

Hi Richard,
I found the link after reading the install guide of SAP more exactly. There are several SAP hint numbers and in one of them there was the information about the jdk link.
In our company we already had so many problems because SAP didn't upgrade to the actual jdk. Keep in mind that the jdk 1.4 is already out of livetime for time. Next year the jdk 5 will go out of livetime and the actual jdk 6 is going to be replaced by the new jdk 7.
I guess SAP doesn't work with test suites so that they easily can switch to a new jdk release. With a test suite they could see all failures coming up after the jdk switch, and they should be easily fixable, if there are any.
Many software frameworks doesn't support older jdk's anymore, at least those which are out of lifetime. Therefore I wrote some kind of wrapper on the java stack in the NW4s so that I can use jdk6 inside the java stack. It's a bit tricky and not yet for general public use but for my own needs it is a work around this jdk 1.4 problem.
So coming back to your jdk question: I installed jdk 1.4 in my solaris 10 container as an addition. In the newest Solaris version there is already jdk 6 included, which I use for all non sap applications.
Good luck with your nw4s.
Cheers
Martin

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Reinstall zones (solaris 8 container)

Hi
I have to restore 2 zones, because originally the zones are stored on a ZFS filesystem i've did the backup with the zfsdump scripts.
I'm able to restore the ZFS filesystems but that leaves me with the problem of reconfiguring the zones.
how do i configure and reinstall these zones?, the original flash archive used to setup these zones is missing.
would it be possible to use the following procedure
1) restore the zfs filesystemen
2) clone the latest snapshot and mount it.
3) create an archive from the mounted snapshot to use as the install media for the zone
the second option i can think of is
1 ) create a standard solaris 8 zone with the solaris 8 image you can download from Sun
2) Copy the files from the mounted clone to the new zone
3) boot the zone
I'm hoping someone could guide me in the right direction
Regards,

I just managed to restore a zfs filesystem with a solaris 8 container on it using the steps below.
I'm curious if i got it right or if there is another more obvious way as i have only a little experience and hands on time with the zfs filesystem.
bash-3.00# zfsrestored.sh -z storage/z-chili
storage/z-chili is restored from /nsr/storage_z-chili.20081206.
bash-3.00#
bash-3.00# zfs clone storage/z-chili@20081206 storage/z-chili/restored
bash-3.00# zfs list
NAME USED AVAIL REFER MOUNTPOINT
storage 85.9G 48.0G 24.5K legacy
storage/data 69.7G 48.0G 69.7G /data
storage/z-chili 7.61G 48.0G 7.61G legacy
storage/z-chili@20081206 0 - 7.61G -
storage/z-chili/restored 0 48.0G 7.61G legacy
storage/z-polen 4.26G 48.0G 4.26G legacy
storage/z-polen@20081211 832K - 4.26G -
storage/zones 4.32G 48.0G 4.32G /export/zones/
bash-3.00#
zfs set mountpoint=/mnt/restore storage/z-chili/restored
bash-3.00# zfs list
NAME USED AVAIL REFER MOUNTPOINT
storage 85.9G 48.0G 24.5K legacy
storage/data 69.7G 48.0G 69.7G /data
storage/z-chili 7.61G 48.0G 7.61G legacy
storage/z-chili@20081206 0 - 7.61G -
storage/z-chili/restored 0 48.0G 7.61G /mnt/restore
storage/z-polen 4.26G 48.0G 4.26G legacy
storage/z-polen@20081211 832K - 4.26G -
storage/zones 4.32G 48.0G 4.32G /export/zones/
bash-3.00# flar create -n zchili -R /mnt/restore/root/ /data/z-chili-restored.flar
Full Flash
Checking integrity...
Integrity OK.
Running precreation scripts...
Precreation scripts done.
Determining the size of the archive...
and i've used the flar image to install the zone.
apart from some file/dir permission rights this worked and i got the zone and webservers up and running.

Solaris 8 Container

Does anyone know where I can download the Solaris 8 Container template or is it licensed?

i didnt however i wasnt hammering it. if the load was expected to be high i would have done the io layout diff (try and follow some of oracles ideas: SAME for one, if possible).
some depends on the load and the load from the other zones. you can use allocate resource limits to give more priority to more important zones or make sure you have enough resources to start. what type of load are you expecting?

Cannot install Solaris 8 Container

Hello,
I'm trying to restore a Solaris 8 container using a flar archive onto a ZFS filesystem. allthough i've done this before succesfully a now encouter the following error.
[Mon May 3 10:38:06 CEST 2010] Log File: /var/tmp/chili.install.3496.log
[Mon May 3 10:38:06 CEST 2010] Product: Solaris 8 Containers 1.0
[Mon May 3 10:38:06 CEST 2010] Installer: solaris8 brand installer 1.22
[Mon May 3 10:38:06 CEST 2010] Zone: chili
[Mon May 3 10:38:06 CEST 2010] Path: /zones/chili
[Mon May 3 10:38:06 CEST 2010] Starting pre-installation tasks.
[Mon May 3 10:38:06 CEST 2010] Installation started for zone "chili"
[Mon May 3 10:38:06 CEST 2010] Source: /mnt/flar/chili-restored.flar
[Mon May 3 10:38:06 CEST 2010] Media Type: flash archive
[Mon May 3 10:38:06 CEST 2010] Installing: This may take several minutes...
[Mon May 3 10:38:06 CEST 2010] cd /zones/chili/root &&
[Mon May 3 10:38:06 CEST 2010] do_flar < "/mnt/flar/chili-restored.flar"
[Mon May 3 10:50:22 CEST 2010] Postprocessing: This may take several minutes...
[Mon May 3 10:50:22 CEST 2010] running: p2v chili
[Mon May 3 10:50:22 CEST 2010] Postprocess: Gathering information about zone chili
[Mon May 3 10:50:22 CEST 2010] Postprocess: Creating mount points
touch: /zones/chili/root/etc/mnttab cannot create
chmod: WARNING: can't access /zones/chili/root/etc/mnttab
[Mon May 3 10:50:22 CEST 2010] Postprocess: Processing /etc/system
/usr/lib/brand/solaris8/s8_p2v[312]: /zones/chili/root/etc/system: cannot open
[Mon May 3 10:50:22 CEST 2010] Result: Postprocessing failed.
[Mon May 3 10:50:22 CEST 2010]
[Mon May 3 10:50:22 CEST 2010] Result: *** Installation FAILED ***
[Mon May 3 10:50:22 CEST 2010] Log File: /var/tmp/chili.install.3496.log
I've done chmod -R 700 /zones/chili but it wont let me install the flar image.
manually i'm able to create files and directories in /zone/chili
suggestions are appriciated.
regards,

It might be connected to the ZFS configuration.
When installing the zone / fills up. After removing some files i had enough room to install the zone.
after installing the zone i logged in and created a 1gb file. a df some a increase in used space on /
my storage pool is on c5t1d0s2
zfs pool look like this;
[root@lapland] zones $ zfs list
NAME USED AVAIL REFER MOUNTPOINT
storage-lapland 74.7G 71.9G 21K legacy
storage-lapland/chili 9.12G 71.9G 9.08G /zones/chili
storage-lapland/chili@20100428 0 - 9.08G -
storage-lapland/chili/restored 36.6M 71.9G 9.08G /mnt/restore
storage-lapland/noo-noo 52.2G 71.9G 51.5G /zones/noo-noo
storage-lapland/noo-noo@20100428 647M - 51.5G -
storage-lapland/polen_1179 4.80G 71.9G 4.80G /zones/polen
storage-lapland/restore 8.66G 71.9G 8.66G /mnt/flar

Solaris 8 container install problem using Ultra 60 flash archive

Hi
I have an M4000 configured with a Solaris 8 container.
I am using a flash archive from an Ultra 60.
Below is the problem when I install.
# zoneadm -z f714clone install -u -a /var/flar/fid714_20090515.flar
Log File: /var/tmp/f714clone.install.26921.log
Source: /var/flar/fid714_20090515.flar
Installing: This may take several minutes...
Postprocessing: This may take several minutes...
WARNING: zone did not finish booting.
Last entry in the logfile is...
[Fri May 15 12:21:22 BST 2009] Postprocess: Performing zone sys-unconfig
It just sits at the WARNING doing nothing.
I connected to the container console using "zlogin -C f714clone" but this just gives me a blank screen with no output and unable to do anything.
I used a different archive from a V120 and had no problems.
Is there something I need to configure for a Ultra 60.
Thanks in advance.
Steve.

I got this to work. It seems, for whatever reason, that it doesn't like the '-u' flag for an Ultra 60. I installed using '-p' instead and it was fine, it even came up with the new IP I had assinged.
zoneadm -z QeSun01b install -p -a qesun01.flar

Application running in Solaris 9 container generating core files. what to do?

My solaris 9 zone configuration in solaris 10 looks like:
zonecfg:sms> info
zonename: sms
zonepath: /zone/sms
brand: solaris9
autoboot: true
bootargs:
pool:
limitpriv: default,proc_priocntl,proc_clock_highres,proc_lock_memory,sys_time,priv_proc_priocntl,priv_sys_time,net_rawaccess,sys_ipc_config,priv_proc_lock_memory
scheduling-class:
ip-type: exclusive
hostid:
[max-shm-memory: 4G]
[max-shm-ids: 100]
[max-sem-ids: 100]
fs:
dir: /var
special: /dev/dsk/c1t0d0s5
raw: /dev/rdsk/c1t0d0s5
type: ufs
options: []
net:
address not specified
physical: bge0
defrouter not specified
device
match: /dev/dsk/c1t0d0s5
device
match: /dev/rdsk/c1t0d0s5
device
match: /dev/dsk/c1t0d0s6
device
match: /dev/rdsk/c1t0d0s6
device
match: /dev/dsk/c1t0d0s7
device
match: /dev/rdsk/c1t0d0s7
capped-cpu:
[ncpus: 2.00]
capped-memory:
physical: 4G
[swap: 8G]
[locked: 2G]
attr:
name: hostid
type: string
value: 84b18f64
attr:
name: machine
type: string
value: sun4u
rctl:
name: zone.max-sem-ids
value: (priv=privileged,limit=100,action=deny)
rctl:
name: zone.max-shm-ids
value: (priv=privileged,limit=100,action=deny)
rctl:
name: zone.max-shm-memory
value: (priv=privileged,limit=4294967296,action=deny)
rctl:
name: zone.max-swap
value: (priv=privileged,limit=8589934592,action=deny)
rctl:
name: zone.max-locked-memory
value: (priv=privileged,limit=2147483648,action=deny)
rctl:
name: zone.cpu-cap
value: (priv=privileged,limit=200,action=deny)
Solaris 9 zone /etc/system file looks like:
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set rlim_fd_max=65536
set rlim_fd_cur=60000
* The directive below is not applicable in the virtualized environment.
My questions are:
1. Application running in solaris 9 container generating core files. what to do???
2. My prstat -Z for zone shows almost 95% percent cpu usage. what to do???
3. Kindly can share how to move solaris 9 into solaris 10 containers ??

Based on the new questions for the same post you wrote in the other communities, some posts are removed as duplicate, here is the answer :
For the point #3, please look on table 17-1 in the following URL :
Zone Components - System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones
You can also customize your container /etc/system file but it cannot exceeds the global zone and the zone configuration value.
For the other point, #2, this can be complicated without a complete image of what the complete system do.
Try fist to check if you have not a busy process in your zone, then you can check if a bottleneck exists in the I/O side. You use maybe wrong parameters, a wrong configuration or your system configuration is insufficient in term of resources.
What I can see in the outputs that you provided is that the S9 zone uses the half of the swap space. This can impact your zone performance and I/O activity, and can have in this case a side effect on some processes. Check why your zone uses the swap and how you can remedy this.

Solaris 9 container : projects?

All,
I created a Solaris 9 container for some DB testing.
I've never actually used projects previously (on both Solaris 9 and 10) and now I'd like to try to use it because I like that you can use rcapstat to see the memory utilization per project. But in order for rcapstat to be useful, I would have to create projects first (correct me if I'm wrong here? It would be great if I dont have to create projects in order to use rcapstat), something like this :
projadd -p 111 -G hkk -c "Oracle Project Test" -K "rcap.max-rss=10MB" -K "process.max-file-size=(priv,50MB,deny)" -K "task.max-lwps=(priv,100,deny)" oraproj
However, when i ran this command on my Solaris 9 container, I got the following error :
Unknown option: K
Usage: projadd [-c comment] [-U user[,user ...]] [-G group[,group ...]]
[-p projid [-o]] project
So it looks like I cant assign a memory cap using project this way on Solaris 9?
I hope someone can point me to the right direction how to do this. I did set the add capped-memory using zonecfg but this isnt useful for the rcapstat command since it seems to be only checking projects...
Thanks!

No reply from anybody?
Sheesh.......just an honest observation here : I'm been using technical forums for awhile and Oracle SUN ones I have to say are the worst with feedbacks. Symantec forums for example you have real Symantec engineers helping with solutions or at least giving pointers. I wish we have the same here....

Setting a floating IP in a solaris local zone!!

I want to install my fault tolerant application in two different
solaris local zones just to save the hardware cost and for testing
purposes.
Earlier before solaris 10, My application runs on two different
machines and receives the incoming requests on a floating IP, thus it
achieves the Fault tolerant behavior with floating IP moving across
the machines on the active application.
There was a separate monitoring process on each machine which runs as
root user and sets and unsets the floating IP using ioctl system calls
on a particular machine as per request received from the application.
Now i want to replicate the same behaviour in solaris 10 setup with my
Fault tolerant application running on two local zones and my
monitoring process which runs on each local zone, set and unset the
floating IP on the particular local zone.
No i want to know that if it is possible for any application to set
floating IP on a particular local zone, from that zone itself and how
can we achieve the same?
regards,
rish

<div class="jive-quote">
<span class="jive-quote-header">MichaelMyers wrote:</span>
I gather some big changes are afoot with the IP stack and zones with the latest Solaris update (the 8/07, update 4 release) -- each zone either does or can have it's own IP stack. This may change the answer to this question...those who's been playing with Open Solaris and/or Solaris Express probably can answer more about that.
</div>
That's correct. You can now use private IP instances for a non-global zone if you want. That zone will now have it's own IP stack and can up/down addresses or whatever. But for now they have to have their own dedicated "interface". This has to be an ethernet device or a VLAN device.
<div class="jive-quote">
<span class="jive-quote-header">
On an unrelated note: the new forum editor apparently doesn't have a way to insert "code" type examples (eg. pre-formatted, in courier, etc.)...
</span>
</div>
Yup. Even in the old editor it was inconsistent where worked. Some forums it would, but not all. I guess now it consistently doesn't work? :-)<br />
<br />
-- <br />
Darren<br />

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

Looking for Feedback on Solaris Studio 12.2 Documentation

Send us feedback about Solaris Studio 12.2 Documentation. What's missing? What do you use the most? What do you like/dislike? What would you like to see in future releases?
Start here: http://www.oracle.com/technetwork/server-storage/solarisstudio/documentation/index.html
--Richard Friedman, for the Oracle Solaris Studio documentation team.

I know you have a more general concern, but here is the answer on SBR.
SBR - beyond Stack Bounds Read
foo () {
int a[5] = {0, 1, 2, 3, 4};
int i = a[-100]; // Read is beyond stack frame bounds
Possible causes: Reading a local array past the end or before the start.

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

Solaris 8 in a Solaris 10 Container

Dear all,
we came upon the question whether it's possible to run Solaris 8 in a Solaris 10 container. Hereby, the idea is to be able to use Solaris 10 with its great ability of server virtualisation but also to use a Oracle 8i certified operating system at the same time.
Any ideas?
Greetings
/Marc

Ok, that was exactly my first impression. Anyway, i
came to know that there's a project about running
FreeBSD in a Solaris 10 Container. How does this work
if there's just a single (so shared) kernel? Can't
image a FreeBSD system running a Solaris kernel.Here's a quote from a Sun blog on the project:
An example of what I mean is ZoneBSD, an opensource initiative with as goal "will be to factor as much Solaris code as necessary into FreeBSD in order to support running a FreeBSD container within a Solaris 10 Zone", really cool stuff... or as they say around here "Sweeet".
(I can no longer find any current link to the project).
So yes, it appears to have been quite an ambitious project involving merging kernel bits. Not something that's going to help you do anything with Oracle on Solaris 10 GA.
Darren

Using SHA1 for passwords in Solaris 10

Does any know how to use SHA1 encryption for passwords on Solaris 10? I know I'd need to modify crypt.conf, but I don't know where to get the .so to go along with that.
I'm moving some users from Mac OS X, and their passwords are SHA1 hashes.
Thanks!
Mike VanHorn
[email protected]

yes, no and maybe :-)
There is a command in /usr/platform/SUNW,Sun-Fire-V210/sbin which allows you to control the LOM, the name of this command is "scadm", the LOM packages on the supplemental CD are for different (older) types of LOM and doesn't to anything useful at all on a SunFire V210.
However, even though the scadm command let you administer the LOM, it won't display the temprature, but you can use the prtdiag -v command to display information about fans, tempratures and friends.
Happy Easter.
//Magnus

NODEAPPS FAILURE FOR IPMP ON SOLARIS LOCAL CONTAINER

Similar Messages

Maybe you are looking for