Nodemanager doesn't display the domain name

Hi
Iam new to wlst scripting and concepts of nodemanager. My aim is to start the server using nodemanager through wlst.
First i invoked the wlst.sh shell script
then i started the nodemanager by using startNodeManager command
Then i tried to connect to nodemanager through nmconnect
Now if i type the command nm() it displays the following
Currently connected to Node Manager to monitor the domain {0}.
It doesn't display my domain name , instead displays {0}. I guess because of the domain name not set properly , i am not able to view the status of the admin server. For this iam using the command nmserverstatus("AdminServer") , it displays the status as UNKNOWN.
Can you please let me know what is that iam missing.

To ask Apple to fix this, you need to repost it at
http://www.apple.com/feedback
If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin.  But it could also be a simple oversight.
Each browser may be different:  Do Firefox and Chrome behave the same?

Similar Messages

  • Safari doesn't display Cyrillic domain name correctly

    Hello there,
    I wonder why is that Safari doesn't display Cyrillic domain name with .укр TLD correctly, that is official Ukrainian Cyrillic TLD.
    For example, if you visit the official website of the President of Ukraine, by typing: президент.укр in your Safari web-browser address bar instead you will see this: xn--d1abbgf6aiiy.xn--j1amh
    On the other hand, if you visit the official website of the Russian president by typing the Cyrillic domain name with .рф TLD: президент.рф, it will be displayed correctly in Safari address bar.
    For me it sounds as some form of discrimination, and I think it should be corrected ASAP.
    Is there any solution to this?
    This is an issue on all Safari web-browsers running on latest iOS of iPhones, iPads and iPods.

    To ask Apple to fix this, you need to repost it at
    http://www.apple.com/feedback
    If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin.  But it could also be a simple oversight.
    Each browser may be different:  Do Firefox and Chrome behave the same?

  • When iTunes pulls up a cd it doesn't display the track names

    I have tried to import several different CDs and the track names are not displayed but about half the time. This particular cd was produced in 2008 and iTunes will display the cd title but that is it. Any advice would be greatly appreciated. Thanks.

    It also needs to be able to access the Gracenote CDDB website to get the info, so maybe security software or your firewall is blocking that site.
    Also proxy servers can mess it up.....a quick thing to do is check your internet settings. In Internet Explorer, go to Tools, Internet Options, Connections, Settings and make sure the box 'Use a proxy server for this connection' is unchecked.

  • Running Windows 7, all versions of Firefox beyond 3.6.0 will not access websites, showing Error 404 and displaying only the portion of the URL that follows the domain name

    Choosing any of several dozen bookmarks, Firefox will show a screen reporting Error 404 and display only part of the complete URL (whatever follows the slant mark beyond the domain name). When going to a new site, such as provided by a Google search, the initial page may show up but clicking on links within that page again brings up the 404 error. My only solution has been to uninstall whatever new version of Firefox has been automatically downloaded and then re-install version 3.6.0, which works.

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    See also http://kb.mozillazine.org/Error_loading_websites

  • Bank transfers: the file DME doesn't display the name of the company

    Hi all,
    In the DME file created by t.code F110, the record 20, doesn't display the name of the company which orders the bank transfer.
    Where should I put it?
    Thanks

    Neeraj,
    Its ECC6.0 and I upload the file by going into their website and putting userid and password and then upload the fiel over there and click send.Is there any possibility the file contains any hidden characters which we dont see? where should I send you dummy file whats your email id.
    Regards
    Shaun

  • 3201: The publisher display name FooBar, specified in the package doesn't match the publisher name, FooBar

    I've updated a WP 8.0 application to WP 8.1 Silverlight. When I try to deploy a demo application I get the following error;
    3201: The publisher display name, FooBar, specified in the package doesn’t match the publisher name,
    FooBar, that’s associated with the developer account.
    I've seen several cases with people encounter this issue and then solved by modifying WPAppManifest or the Packages file. My problem is that the
    display name and publisher name is exactly the same. Both in the application xml files and in the error message displayed by windows phone store. 
    Any suggestions?

    There is no requirement that source code files are in the correct directory structure. If you want javac to be able to automatically compile dependent files, then the source code must be in an appropriate structure and find-able from the classpath.
    Also, when you use the -d option, javac will create an appropriate directory relative to the directory specified in the -d option. That's how it is supposed to work.
    So it is working as designed and specified.

  • My iphone 4 music player doesn't display the arabic songs names ?

    My iphone 4 music player doesn't display the ARABIC songs names ?

    ok i found the solution here by deleting the corrupted library
    http://portablevideo.blogspot.com/2008/12/music-player-database-problems.html 
    now one of these below is for the music and one for the photos and i didnt have a problem with the photos but did it anyways and now the player can see my music:
    these are the files that need deleting in order to get rid of the corrupted library.
    Storage Drives: (Mass storage E, Memory Card F)
    \private\101ffca9\harvesterdbvx_x.dat
    \private\10281e17\[string]mpxvx_x.db
    \private\10281e17\[string]pcvx_x.db 
    TIP: Connect the device in USB mass storage mode (File Transfer), to locate the private folder from the PC.
    TIP: STRING and x_x will change depending on your phone. (my files had slightly different names than above on the n97)

  • Need to see the domain name displayed at the admin console login page

    I used to see the domain name at the console login page until I was running WLS 8.1 SP3.
    Now that I have SP5 I am not able to see it anymore, I am curious to know what has caused this error.
    If anyone has an answer , please reply .

    Hi,
    For accessing any application outside domain you need to have Public IP of the server where your you have put your application.
    Regards,
    Gulrez Alam

  • How do I get IE to drop the domain name from authentication responses

    All,
    I have a number of internal www servers that run various non MS operating systems which are not tied to the windows domain in any way. They are secure www sites and require authentication.
    When I connect to one via IE on a domain joined workstation or server (ie 8 & 9) I am unable to authenticate because I can not remove the domain name from the authentication credentials that IE is passing back to the www server.  I get an authentication
    prompt for user name & password with the domain pre populated.
    How the heck to I get IE to NOT pass the domain name as part of the authentication process. I've tried putting .\ in front of the user name but to no avail.
    Thanks,
    Steve D.

    As you can see below, when you first attempt the auth it defaults to you domain user account... in this case win\username.
    When you select use another account, you get the following with no means to remove the domain name which causes auth failure as this www server isn't a domain member and doesn't use the domain for auth.
    How do I get rid of Domain: .... ???
    Thanks,
    Steve D.

  • How to change the Domain name of portal

    Hi All,
    We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
    the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
    Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
    Now we are planning to change the domain name on the BI portal.
    Does anyone let me know how and where we need to go and change this Domain name ?
    Thanks in advance for your help.
    Regards,
    Alok Varma

    Hi,
    first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
    Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
    As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
    The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
    br,
    Tobias

  • How to create a task list view in c# that doesn't display the timeline

    How can I create a view for a task list using c# that doesn't display the timeline.  I want to do this using server side code but I can't seem to find a view property that will hide the timeline.  I know how to do it manually through the UI but
    I need to automate it.
    Caroline

    Hi Garoline,
    We can set ViewData of the view to empty to achieve your requirement. The following code snippet for your reference:
    using (SPSite site = new SPSite("http://sp2013sps/"))
    using (SPWeb web = site.OpenWeb())
    SPList list = web.Lists["TaskList"];
    SPViewCollection allviews = list.Views;
    string viewName = "Test View";
    System.Collections.Specialized.StringCollection viewFields = new System.Collections.Specialized.StringCollection();
    viewFields.Add("Checkmark");
    viewFields.Add("LinkTitle");
    viewFields.Add("Due Date");
    viewFields.Add("Assigned To");
    string myquery = "<where><gt><fieldref name='ID' /><value type='Counter'>0</value></gt></where>";
    allviews.Add(viewName, viewFields, myquery, 100, true, false);
    SPView view=list.Views[viewName];
    view.ViewData = "";
    view.Update();
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to display the folder name in a webi report at infoview

    Hi all,
    Suppose I have a report named "Test_Report" at location Public folder > Test_Folder> Reports_Folder
    now I want to display the folder name "Test_Folder" using a variable in "Test_Report".
    So that the variable will always display the corresponding folder name of "Test_Report" wherever the report resides.
    Thanks in advance.

    Folder name is located in the breadcrumb
    remove your breadcrumb in your collectionrenderer of the layout set you are using.
    Check the layout set you are using in your KM navigational iview.
    Raghu

  • The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

    Hello,
    I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
    There seem to be a couple of things wrong with the application,
    1     if I drag the application icon onto the dock, it won't stay there
    2     I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details.  All that comes up is the main page of her website.
    I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
    Any ideas please?
    she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

    NO - not correct.  Even if you are still using iWeb 08, you can still publish to another host and not MobileMe.  You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
    MobileMe will not be here after the end of June, so you will have to find alternative hosting.  They are not taking any new subscriptions.
    On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11.  Both contains iWeb 09, which is what you would want.

  • How to display the column names of a table in the output

    Hi,
    I want to display the name of the columns of the table without using literals in a abap report.
    EX: Consider the table KNA1
    KUNNR NAME  ADDRESS
    I want to display the column names in the above fashion without using hardcoded write statements.
    Thanking in anticipation

    You can use this FM <b>DDIF_FIELDINFO_GET</b> It gives you all the names related to fields in a table -:)
    Greetings,
    Blag.

  • WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

    Hi all,
    I'm using the following code to generated my report from Forms:<br><br>
    V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
    V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
        V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
        V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
    LOOP
       IF V_REPORT_STATUS = 'FINISHED' THEN          
          V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID  ||'.pdf' ;
         COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
        WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL ||  'rpt'|| V_JOB_ID  ||'.pdf' ,'_BLANK');     
        END IF;
    END LOOP; <br><br>
    Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
    <br><br>
    <b>Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?</b>

    I agree with the previous 2 posters.
    Also firefox and ie handle it differently. Make sure you test on what your clients use.
    Sometimes acrotray.exe is completely retarded and doesn't work.

Maybe you are looking for