Nodes in the Domain

Hi..!
I want to find out the IP address and Names of all the PCs connected to a particualr domain. and then show the same listing in a JList.
My problem is how to find out the listing of IP address and Names of the PCs in a particualr domain.
Can any one please help?
Thank you..
Nikhil

Have you had a look on Google? This has some example DNS clients and DNS libraies you can use.
http://www.google.co.uk/search?q=java+dns&ie=UTF-8&oe=UTF-8&hl=en&meta=

Similar Messages

Master Gateway node for the domain is not available

Any hints in the catalina.out, exceptions.log, node.log or domain log files?

Hi All, We are using Informatica 9.5.1 and Oracle 11g as by metadata DB. Initially our INFA_DOMAIN_REPO password was expired, so we couldn't connect to repository. Then we reset the same password and we restarted infa services also. But when we tried to connect repository we faced "Failed to connect repository" error. When i try to connect to Admin Consol, page was not displayed. When we check the node.log file it had a error message saying "2014-07-20 04:45:37,553 ERROR [Monitor Guaranteed Message Logger Thread] [CCM_10322] While logging messages to the Log Service, the following error occurred: [[DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to complete. If the problem persists, verify that the master gateway node is running.]. Fix the errors written to the node.log file. com.informatica.isp.domainservice.exceptions.ISPMasterNotAvailableException: [DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to complete. If the problem persists, verify that the master gateway node is running" We checked all the env variables and all looking fine.Node is also running. Please help to uderstand this issue ans the fix. Thanks in advance Regards,JP

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

How do I apply a win7 localgpo to a server on the domain?

Hi,
I exported a backup of group policy via LocalGPO and need to apply it to many Win7 machines in AD domain. Can I do this, and how would I accomplish this task? Do I need to create .cab package in SCM too?
Thanks in advance,
J

> I exported a backup of group policy via LocalGPO and need to apply it to
> many Win7 machines in AD domain. Can I do this, and how would I
> accomplish this task? Do I need to create .cab package in SCM too?
A local gpo essentially is a registry.pol file and a gpttmpl.inf file.
Maybe some others, but that doesn't matter.
In short:
To "copy" a local gpo into a domain GPO, simply create a new domain gpo,
edit this new GPO and add a setting of your choice in each gpedit node
that you used in your local gpo. This will create some required
attributes for the domain gpo.
Then navigate to the sysvol folder of this domain gpo and copy the
contents of your local gpo into that folder - done.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Need to collect the Windows logon and logoff events across the Domain in a DC eviornment, for different machines and user accounts.

Hello All,
I am trying to build a Tool to collect the info about all the user's who login and logoff on daily basis in a domain network. I am using a windows 2008 server as a DC and have xp, win 7, win 8 , win 12 server as clients in the network.
There are few questions in my mind which I am not able to answer.
1> When a user tries to login to the DC network, he/ she gets authenticated using the kerberos protocol. does these authentication gets logged on the AD server by default? I have see a way to enable it from registry but even that's not giving me the expected
output in the eventvwr.
2> Do I have to use Audit policies to monitor all the user's log off and log on activities?
3> Is there a way to collect these information from any place on the AD server other than the Eventvwr?
Please help me in finding the solutions to these query's of mine.
Thanks.

1. Open the Group Policy Management console on any domain controller in the target domain: navigate to Start → Administrative Tools → Group Policy Management.
2. In the left pane, navigate to Forest: <domain_name>→ Domains → <domain_name>→ Domain Controllers. Right-click the effective domain controllers policy (by default, it is the Default Domain Controllers Policy), and select Edit from the pop-up
menu. </domain_name></domain_name>
<domain_name><domain_name>3. In the Group Policy Management Editor dialog, expand the Computer Configuration node on the left and navigate to Policies → Windows Settings → Security Settings → Local Policies → Audit Policy. </domain_name></domain_name>
<domain_name><domain_name>4. Set the Audit account management and the Audit directory service access policy to "Success". Set the Audit logon events policy to "Success" and "Failure". </domain_name></domain_name>
5. Navigate to Start → Run and type '"cmd". Input the gpupdate /force command and press Enter. The group policy will be updated.
Number of events could be excessive so you need to adjust size of Security log ( 1gb for example )
Usage of EventCombMT Tool (part of
MS ALtools )
 This tool gathers specific events from several different servers to one central location.
 Run the EventCombMT.exe > Right Click on Select to search field > Choose Get DCs in Domain > Mark your Domain Controllers for search
 Click the Searches menu > replace Event ID field values with
4624 LOGON / 4634 LOGOFF
 Click Search and wait for the process to complete the operation.
 After the search is done the output directory contains the log files for the domain controllers where events with the specified Event ID’s were found.
Alternatively you can try Netwrix Auditor for Active Directory solution with 20 days of free trial to generate such reports.
--- Jeff (Netwrix)

Nodemanager doesn't display the domain name

Hi
Iam new to wlst scripting and concepts of nodemanager. My aim is to start the server using nodemanager through wlst.
First i invoked the wlst.sh shell script
then i started the nodemanager by using startNodeManager command
Then i tried to connect to nodemanager through nmconnect
Now if i type the command nm() it displays the following
Currently connected to Node Manager to monitor the domain {0}.
It doesn't display my domain name , instead displays {0}. I guess because of the domain name not set properly , i am not able to view the status of the admin server. For this iam using the command nmserverstatus("AdminServer") , it displays the status as UNKNOWN.
Can you please let me know what is that iam missing.

To ask Apple to fix this, you need to repost it at
http://www.apple.com/feedback
If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin. But it could also be a simple oversight.
Each browser may be different: Do Firefox and Chrome behave the same?

Error occured joining the domain. The specified network name is no longer available - Error during joining a machine to a domain

Hi!
We have two companies in our building, Company A and Company B. Company A has 50 client computers and one brand new DC (Win 2012 R2 Std). Company B has 5 clients and one established DC (Win 2008 R2 Foundation).
I work for Company A and I have the job of connecting all 50 clients to the new DC. Up until last week we had a workgroup set up and it has been my task to migrate our clients onto the domain. I have done 10 migrations of Win 7 machines so far, but three
others seem to be unable to connect with the error: The specified network name is no longer available.
I have connected these successfully to Company B Domain Controller successfully so this seems to point towards Company A DC being wrong somewhere, but doesn't make sense as to why 10 other clients have connected fine.
Here are the troubleshooting steps I have taken so far:
I am in the Domain Admin group on Company A Active Directory
Computer Browser Service is running on server and affected client
Workstation Service is running on server and affected client
Server Service is running on server and affected client
To connect to the domain I have tried using the NetBIOS and the FQDN, I get the same error message.
NETLOGON service is enabled tried restarting - no difference
Windows Firewall is off
No AV installed at the moment. I have Sophos waiting to go on once the machine is hooked onto the domain.
DNS Reverse lookup manually created as it wasn't there
Tried ipconfig /flushdns /release /renew
NSLookup sucessful, can ping NETBIOS, FQDN of server and both client and server IP both directions
Affectted clients are configured with one network card.
I've been pulling my hair out for a few days on this one. Anyone have a possible solution for this.
Many thanks,
Matt

Hi!
We have two companies in our building, Company A and Company B. Company A has 50 client computers and one brand new DC (Win 2012 R2 Std). Company B has 5 clients and one established DC (Win 2008 R2 Foundation).
I work for Company A and I have the job of connecting all 50 clients to the new DC. Up until last week we had a workgroup set up and it has been my task to migrate our clients onto the domain. I have done 10 migrations of Win 7 machines so far, but three others
seem to be unable to connect with the error: The specified network name is no longer available.
I have connected these successfully to Company B Domain Controller successfully so this seems to point towards Company A DC being wrong somewhere, but doesn't make sense as to why 10 other clients have connected fine.
Here are the troubleshooting steps I have taken so far:
I am the Domain Admin group on Company A Active Directory and have full Admin rights to Company B
Computer Browser Service is running on server and affected client
Workstation Service is running on server and affected client
Server Service is running on server and affected client
NETLOGON service is enabled tried restarting - no difference
IPv6 is enabled, but not used
DCDIAG tests all pass
NIC 2 has been disabled as it is not used
NIC 1 is first priority
To connect to the domain I have tried using the NetBIOS and the FQDN, I get the same error.
Windows Firewall is off
No AV installed at the moment. I have Sophos waiting to go on once the machine is hooked onto the domain.
DNS Reverse lookup manually created as it wasn't there
Tried ipconfig /flushdns /release /renew /registerdns
NSLookup sucessful, can ping NETBIOS, FQDN of server and both client and server IP both directions
Affected clients are configured with one network card.
*****Domain Controller*****
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : AG-ADDS
Primary Dns Suffix . . . . . . . : aggora.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : aggora.local
Ethernet adapter NIC1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : F8-BC-12-3D-C7-6A
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b499:7b3b:5ee7:618c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.251(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.4
DHCPv6 IAID . . . . . . . . . . . : 318290962
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-3E-88-37-F8-BC-12-3D-C7-6A
DNS Servers . . . . . . . . . . . : ::1
10.0.0.251
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{F2A8A31C-01D2-4F6F-8CFF-A5AB69F344A8}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
*****Problematic Client*****
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : AG21
Primary Dns Suffix . . . . . . . : aggora.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : aggora.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : aggora.local
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-19-99-9B-90-5B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.0.0.115(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 23 July 2014 10:12:30
Lease Expires . . . . . . . . . . : 24 July 2014 10:12:30
Default Gateway . . . . . . . . . : 10.0.0.4
DHCP Server . . . . . . . . . . . : 10.0.0.253
DNS Servers . . . . . . . . . . . : 10.0.0.251
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.aggora.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : aggora.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I'd be grateful for any assistance.
Many thanks,

Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!

Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Problem to change the domain

Hi,
I am to change the domain in the client machine but I have got this
On the client, I am able to ping the domain and I've also put the IP of the domain server as DNS server like
Many Thanks & Best Regards, Hua Min

Thanks all.
I have done some change to one connection on the client machine
C:\Users\HuaMin>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : HMC-WIN7ENT
   Primary Dns Suffix . . . . . . . : win08.huamin.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : win08.huamin.com
                                       abc.com
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . : abc.com
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop Adapter #2
   Physical Address. . . . . . . . . : 08-00-27-E7-47-33
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : ?.255.241.11(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.240.0
   Lease Obtained. . . . . . . . . . : Thursday, January 16, 2014 9:38:56 AM
   Lease Expires . . . . . . . . . . : Thursday, January 16, 2014 2:10:10 PM
   Default Gateway . . . . . . . . . : ?.255.240.1
   DHCP Server . . . . . . . . . . . : 10.17.8.2
   DNS Servers . . . . . . . . . . . : 210.0.128.241
                                       210.0.255.144
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop Adapter
   Physical Address. . . . . . . . . : 08-00-27-6D-E3-04
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 103.11.228.33(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.192
   Default Gateway . . . . . . . . . : 103.11.228.1
   DNS Servers . . . . . . . . . . . : 127.0.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6B6B9412-430A-409D-BB5F-3C52D6BD6B93}:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::200:5efe:103.11.228.33%13(Preferred
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 127.0.0.1
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter 6TO4 Adapter:
   Connection-specific DNS Suffix . : abc.com
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : ?.670b:e421::670b:e421(Preferred)
   IPv6 Address. . . . . . . . . . . : ?.71ff:f10b::71ff:f10b(Preferred)
   Default Gateway . . . . . . . . . : ?.c058:6301::c058:6301
   DNS Servers . . . . . . . . . . . : 210.0.128.241
                                       210.0.255.144
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.abc.com:
   Connection-specific DNS Suffix . : abc.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::200:5efe:?.255.241.11%15(Preferre
d)
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 210.0.128.241
                                       210.0.255.144
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
But I still get the same when changing the domain.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "my-friend.co":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.my-friend.co
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
127.0.0.1
210.0.255.144
210.0.128.241
- One or more of the following zones do not include delegation to its child zone:
my-friend.co
co
. (the root zone)
Many Thanks & Best Regards, Hua Min

Can we change the UCCX server from single node to the first node without affecting it's configurations

Hi all,
Firstly I was using the single CUCM7.0 server with the single UCCX 7.0 server. Now I am going to add the second CUCM and UCCX in the cluster. I was first configured the UCCX server as a single node. Now I have to configure this as a first node. How I could configure this from single node to the first node without affecting it's configurations..??????
Regards
Ali Raza

Hi Aaron,
How could we do the change on Imhost file. How we add the both servers in that file?
Below is the Imhost file txt.
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#      #PRE
#      #DOM:
#      #INCLUDE
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
# The following example illustrates all of these extensions:
# 102.54.94.97     rhino         #PRE #DOM:networking #net group's DC
# 102.54.94.102    "appname \0x14"                    #special app server
# 102.54.94.123    popular            #PRE             #source server
# 102.54.94.117    localsrv           #PRE             #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
Regards
Ali Raza

Add node to the cluster

Dear Experts,
Please help me, I am new in RAC and I have a question please;
We have 6 nodes cluster of 11.2.0.2.3 version and my manager wants me to add a new node to the cluster.
Could you please send me the steps 1, 2 , 3 ...
we have not shared oracle homes (oracle user), not shared grid homes (grid user) and they are all patched with patch set update 3 (11.2.0.2.3) all under Enterprise Redhat Linux 5.5.
Please also tell me with which system user (oracle, root or grid) I have to run each command...
Could you help me?
S

I have the following errors, could you help me please? (Oracle and grid homes are not shared)
-bash-3.2$ ./addNode.sh "CLUSTER_NEW_NODES={db07}" "CLUSTER_NEW_VIRTUAL_HOSTNAMES={db07-vip}"
Performing pre-checks for node addition
Checking node reachability...
Node reachability check passed from node "db01"
Checking user equivalence...
User equivalence check passed for user "grid"
Checking node connectivity...
Checking hosts config file...
Verification of the hosts config file successful
Check: Node connectivity for interface "bond1"
Node connectivity passed for interface "bond1"
Node connectivity check passed
Checking CRS integrity...
CRS integrity check passed
Checking shared resources...
Checking CRS home location...
ERROR:
PRVF-4864 : Path location check failed for: "/opt/11.2.0/grid"
Shared resources check for node addition failed
Check failed on nodes:
        db07
Checking node connectivity...
Checking hosts config file...
Verification of the hosts config file successful
Check: Node connectivity for interface "bond0"
Node connectivity passed for interface "bond0"
Check: Node connectivity for interface "bond1"
Node connectivity passed for interface "bond1"
Node connectivity check passed
Total memory check passed
Available memory check passed
Swap space check failed
Check failed on nodes:
        db01,db07
Free disk space check failed for "db01:/tmp"
Check failed on nodes:
        db01
Free disk space check failed for "db07:/tmp"
Check failed on nodes:
        db07
Check for multiple users with UID value 501 passed
User existence check passed for "grid"
Run level check passed
Hard limits check passed for "maximum open file descriptors"
Soft limits check passed for "maximum open file descriptors"
Hard limits check passed for "maximum user processes"
Soft limits check passed for "maximum user processes"
System architecture check passed
Kernel version check passed
Kernel parameter check passed for "semmsl"
Kernel parameter check passed for "semmns"
Kernel parameter check passed for "semopm"
Kernel parameter check passed for "semmni"
Kernel parameter check passed for "shmmax"
Kernel parameter check passed for "shmmni"
Kernel parameter check passed for "shmall"
Kernel parameter check passed for "file-max"
Kernel parameter check passed for "ip_local_port_range"
Kernel parameter check passed for "rmem_default"
Kernel parameter check passed for "rmem_max"
Kernel parameter check passed for "wmem_default"
Kernel parameter check passed for "wmem_max"
Kernel parameter check passed for "aio-max-nr"
Package existence check passed for "make-3.81( x86_64)"
Package existence check passed for "binutils-2.17.50.0.6( x86_64)"
Package existence check passed for "gcc-4.1.2 (x86_64)( x86_64)"
Package existence check passed for "libaio-0.3.106 (x86_64)( x86_64)"
Package existence check passed for "glibc-2.5-24 (x86_64)( x86_64)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)( x86_64)"
Package existence check passed for "elfutils-libelf-0.125 (x86_64)( x86_64)"
Package existence check passed for "elfutils-libelf-devel-0.125( x86_64)"
Package existence check passed for "glibc-common-2.5( x86_64)"
Package existence check passed for "glibc-devel-2.5 (x86_64)( x86_64)"
Package existence check passed for "glibc-headers-2.5( x86_64)"
Package existence check passed for "gcc-c++-4.1.2 (x86_64)( x86_64)"
Package existence check passed for "libaio-devel-0.3.106 (x86_64)( x86_64)"
Package existence check passed for "libgcc-4.1.2 (x86_64)( x86_64)"
Package existence check passed for "libstdc++-4.1.2 (x86_64)( x86_64)"
Package existence check passed for "libstdc++-devel-4.1.2 (x86_64)( x86_64)"
Package existence check passed for "sysstat-7.0.2( x86_64)"
Package existence check passed for "ksh-20060214( x86_64)"
Check for multiple users with UID value 0 passed
Current group ID check passed
Checking OCR integrity...
OCR integrity check passed
Checking Oracle Cluster Voting Disk configuration...
Oracle Cluster Voting Disk configuration check passed
Time zone consistency check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
Check for NTP daemon or service alive passed on all nodes
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
PRVF-5413 : Node "db01" has a time offset of -165613.0 that is beyond permissible limit of 1000.0 from NTP Time Server "192.168.248.253"
PRVF-5413 : Node "db07" has a time offset of -161593.0 that is beyond permissible limit of 1000.0 from NTP Time Server "192.168.248.253"
PRVF-5424 : Clock time offset check failed
Clock synchronization check using Network Time Protocol(NTP) failed
User "grid" is not part of "root" group. Check passed
Checking consistency of file "/etc/resolv.conf" across nodes
File "/etc/resolv.conf" does not have both domain and search entries defined
domain entry in file "/etc/resolv.conf" is consistent across nodes
search entry in file "/etc/resolv.conf" is consistent across nodes
All nodes have one search entry defined in file "/etc/resolv.conf"
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Checking VIP configuration.
Checking VIP Subnet configuration.
Check for VIP Subnet configuration passed.
Checking VIP reachability
Check for VIP reachability passed.
Pre-check for node addition was unsuccessful on all the nodes.
-bash-3.2$

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

Error in starting the domain in application server 8.2

I want to deploy a application EAR on newly created domain. For this :
1. Got the 8.2 Java application server installed on solaris box.
2. Created domain using the asadmin command -> create-domain --adminport 4848 --adminuser admin <DOMAIN_NAME>
On starting the domain with this command - sh asadmin start-domain --user admin <DOMAIN_NAME. I am facing the below issue. Please note this is a fresh installation of the app server and a new domain
To troubleshoot this, I have already followed below steps , without any resolution:
1. Checked port with - netstat -an|grep 45184 and also checked the processes using ps -fu <unix_user>. Even after killing the process, same error.
2. Gave full permissions on /AppServer8.2/imq/var/instances
3. Logged in as root user and then tried to start domain
4. Updated domain.xml with some other port , checked this port if it is free , then replaced in domain.xml
5. No logs generated in /AppServer8.2/imq/var/instances
Please help me in resolving this issue. I have downloaded the 9.1 application server and will install and check in the meantime
[#|2013-07-29T14:14:34.067+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
/usr/j2se/bin/java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/logs/server.log
-Djava.endorsed.dirs=/PostCUG_Track1/AppServer8.2/lib/endorsed
-Djava.security.policy=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/server.policy
-Djava.security.auth.login.config=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/keystore.jks
-Djavax.net.ssl.trustStore=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/cacerts.jks
-Djava.ext.dirs=/usr/j2se/jre/lib/ext:/PostCUG_Track1/AppServer8.2/domains/MPCBebk/lib/ext:/PostCUG_Track1/AppServer8.2/derby/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=MPCBebk
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=/PostCUG_Track1/AppServer8.2/domains/MPCBebk
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=MPCBebk
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=/PostCUG_Track1/AppServer8.2/config
-Djava.library.path=/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/PostCUG_Track1/AppServer8.2/lib:/usr/lib/lwp:/PostCUG_Track1/AppServer8.2/lib:/usr/lib/lwp:/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/PostCUG_Track1/AppServer8.2/lib:/PostCUG_Track1/AppServer8.2/lib:/PostCUG_Track1/AppServer8.2/lib:/opt/CA/SharedComponents/lib:/usr/lib
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
/PostCUG_Track1/AppServer8.2/lib/appserv-rt.jar:/usr/j2se/lib/tools.jar:/PostCUG_Track1/AppServer8.2/lib/j2ee.jar:/PostCUG_Track1/AppServer8.2/lib/activation.jar:/PostCUG_Track1/AppServer8.2/lib/mail.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-cmp.jar:/PostCUG_Track1/AppServer8.2/lib/admin-cli.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-admin.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-jstl.jar:/PostCUG_Track1/AppServer8.2/lib/commons-launcher.jar:/PostCUG_Track1/AppServer8.2/lib/commons-logging.jar:/PostCUG_Track1/AppServer8.2/lib/j2ee-svc.jar:/PostCUG_Track1/AppServer8.2/lib/jaxr-api.jar:/PostCUG_Track1/AppServer8.2/lib/jaxr-impl.jar:/PostCUG_Track1/AppServer8.2/lib/jaxrpc-api.jar:/PostCUG_Track1/AppServer8.2/lib/jaxrpc-impl.jar:/PostCUG_Track1/AppServer8.2/lib/dom.jar:/PostCUG_Track1/AppServer8.2/lib/relaxngDatatype.jar:/PostCUG_Track1/AppServer8.2/lib/jax-qname.jar:/PostCUG_Track1/AppServer8.2/lib/saaj-api.jar:/PostCUG_Track1/AppServer8.2/lib/saaj-impl.jar:/PostCUG_Track1/AppServer8.2/lib/xsdlib.jar:/PostCUG_Track1/AppServer8.2/lib/jmxremote.jar:/PostCUG_Track1/AppServer8.2/lib/jmxremote_optional.jar:/PostCUG_Track1/AppServer8.2/lib/jsf-api.jar:/PostCUG_Track1/AppServer8.2/lib/jsf-impl.jar:/PostCUG_Track1/AppServer8.2/lib/rmissl.jar:/PostCUG_Track1/AppServer8.2/lib/xalan.jar:/PostCUG_Track1/AppServer8.2/lib/xercesImpl.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-upgrade.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-ext.jar:/PostCUG_Track1/AppServer8.2/lib/install/applications/jmsra/imqjmsra.jar:/PostCUG_Track1/AppServer8.2/imq/lib/jaxm-api.jar:/PostCUG_Track1/AppServer8.2/imq/lib/fscontext.jar:/PostCUG_Track1/AppServer8.2/lib/ant/lib/ant.jar
com.sun.enterprise.server.PEMain
start
display|#]
[#|2013-07-29T14:15:35.774+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5035: Timed out after 60000 milliseconds while trying to verify if the JMS service startup succeeded.|#]
[#|2013-07-29T14:15:35.776+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5037: Check permissions of MQ instance directory /PostCUG_Track1/AppServer8.2/imq/var/instances|#]
[#|2013-07-29T14:15:35.776+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5036: More details may be available in the log file for the JMS service broker instance imqbroker. Please refer to the JMS provider documentation for the exact location of this log file.|#]
[#|2013-07-29T14:15:35.777+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|UnknownException during startup. Disable quick startup by setting system property com.sun.enterprise.server.ss.ASQuickStartup to false
com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation [127.0.0.1:45184]. - cause: java.io.IOException
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:427)
at com.sun.enterprise.server.ss.ASLazyKernel.startASSocketServices(ASLazyKernel.java:54)
at com.sun.enterprise.server.PEMain.run(PEMain.java:274)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: com.sun.messaging.jms.JMSException: [C4003]: Error occurred on connection creation [127.0.0.1:45184]. - cause: java.io.IOException
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSConnectException(ExceptionHandler.java:233)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleConnectException(ExceptionHandler.java:180)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:191)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:116)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:54)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:61)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:102)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnectionOld(ConnectionInitiator.java:291)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:113)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:98)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:613)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:1194)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1949)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:745)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:315)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:783)
at com.sun.enterprise.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:335)
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:396)
... 3 more
Caused by: java.io.IOException
at com.sun.enterprise.server.ss.ASInputStream.waitForSelect(ASInputStream.java:118)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:81)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:73)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at com.sun.messaging.jmq.io.PortMapperTable.readLine(PortMapperTable.java:277)
at com.sun.messaging.jmq.io.PortMapperTable.read(PortMapperTable.java:233)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:185)
... 21 more
Caused by: java.io.IOException: Invalid argument
at sun.nio.ch.DevPollArrayWrapper.poll0(Native Method)
at sun.nio.ch.DevPollArrayWrapper.poll(DevPollArrayWrapper.java:136)
at sun.nio.ch.DevPollSelectorImpl.doSelect(DevPollSelectorImpl.java:70)
at sun.nio.ch.SelectorImpl.lockAndDoSelect(SelectorImpl.java:59)
at sun.nio.ch.SelectorImpl.select(SelectorImpl.java:70)
at com.sun.enterprise.server.ss.ASSelector.select(ASSelector.java:92)
at com.sun.enterprise.server.ss.ASInputStream.waitForSelect(ASInputStream.java:101)
... 28 more
|#]
[#|2013-07-29T14:15:35.798+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Exception while stoppping Lifecycle.
com.sun.appserv.server.ServerLifecycleException: MQ startup failed :[C4003]: Error occurred on connection creation [127.0.0.1:45184]. - cause: java.io.IOException
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:376)
at com.sun.enterprise.jms.JmsProviderLifecycle.onShutdown(JmsProviderLifecycle.java:445)
at com.sun.enterprise.server.ss.ASLazyKernel.stopLifecycle(ASLazyKernel.java:178)
at com.sun.enterprise.server.ss.ASLazyKernel.stopMQ(ASLazyKernel.java:172)
at com.sun.enterprise.server.ss.ASLazyKernel.exitServer(ASLazyKernel.java:74)
at com.sun.enterprise.server.ss.ASLazyKernel.startASSocketServices(ASLazyKernel.java:67)
at com.sun.enterprise.server.PEMain.run(PEMain.java:274)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]

Hi,
Try to manually download the file from application server using standard transactions, and than check how many records are you able to download from app. server.
I guess there might be something wrong with the format of 583rd record, which makes sap assume that the file has come to an end.
Hope this will help you.
Regards,
Vinit...

Server failed to start: The domain path does not match the running server

Hi,
I've configured Eclipse to run my local weblogic - which actually is working fine.
The server starts as intended and reaches state RUNNING.
As soon as this happens, OEPE tries to validate the server and compares the identified server's configuration to the expected configuration.
This finally results into the error message shown in the subject -- though server is still running.
!MESSAGE Server watcher[Oracle WebLogic Server 11gR1 PatchSet 1 at localhost]:The domain path does not match the running server.
Domain RootDirectory retrieved from the MBean of running server is: N:\Oracle\MIDDLE~1\USER_P~1\domains\MYWEBL~1\
Domain RootDirectory of this server: N:\Oracle\Middleware\user_projects\domains\myWeblogicServer
Obviously this seems to be an issue with the length of the directory and file names. The domain's configuration and all its start scripts do not have any 8+3 pathes, like USER_P~1 for user_projects. Nevertheless the MBean of the server returns such a "truncated" path which in turn is invalid for OEPE.
Fix: When setting up the domain in Eclipse, try using that 8+3 representation of the domain's location. Then the comparison will succeed...
My Question: Where do we need to ask for a fix in OEPE? The 8+3 path is still a valid one ...
Best Regards
Philipp

I haven't been able to reproduce this and 8+3 representation of the domain's location shouldn't be required.
Can you provide more information:
- is this a network drive?
- what is your OS: XP, Vista, Win7?
- what is the Windows file system type, is it FAT or NTFS
- Can you try install WLS on C:, e.g. C:\Oracle\Middleware\user_projects and see if it still happens?

The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

Hello,
I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
There seem to be a couple of things wrong with the application,
1 if I drag the application icon onto the dock, it won't stay there
2 I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details. All that comes up is the main page of her website.
I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
Any ideas please?
she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Nodes in the Domain

Similar Messages

Maybe you are looking for