Noise after switch to Creation m

my X-Fi Elite PRO generate some noise after I switch to creation mode from any other modes. But this doesn't happen every time, if I switch it again, sometimes fix the problem.
But the problem never happen when I switch to entertainment or gaming mode. I think its something wrong with the driver, please fix it...
Note: I enabled the accurate playback and set 44KHz as the main frequency. And using lastest driverMessage Edited by Cemson on -6-200607:58 AM

I see you are posting several requests here for different problems and i wonder if you have got your PC set up correct in the first instance. Did you do a clean install or just install X-Fi drivers on top of your previous card drivers. Is your OS up to date. Are your motherboard drivers and bios up to date. Newer hardware does require newer drivers etc. Make sure everything on your PC is updated and that you remove old sound drivers before installing new ones. Note that after installing the X-Fi CD drivers you should then install the latest Webupdate drivers which are only a few days old.
Hope this hel
ps.

Similar Messages

Duet makes noise after switching between finder audio and Logic

Hi
My Duet makes noise after switching between "finder audio" and "Logic", In other words i would play a mp3 in the finder and when returning to Logic all my audio sounds like the "lo-fi" RTAS free plug digidesign gives away now.
This is happening on a White *iMac 24"*
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f3
MacOsx 10,5,7

Does this happen every single time? The same thing happens to me every once in a while. I just close Logic and Maestro and unplug the Duet. Then, in this order, plug in the Duet, wait for it to click, load Maestro, load Logic. Works every time.
Edit: It does only seem to happen when I switch from Logic and the audio output from the Duet to internal and then come back quickly. I don't think it's an issue with the Duet hardware itself.
Message was edited by: AecDuck

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Display flickering after switching laptop on, display flickering after switching laptop on

after switching on my laptop the screen starts flickering.

after switching on my laptop the screen starts flickering.

How do I find the address -thread - of a file. I used to use spotlight but after switching to Mountain Lion it no longer gives me this.

How do I find the address -thread - of a file. I used to use spotlight but after switching to Mountain Lion it no longer gives me this.

Hold Command-Option while pointing to an item in the Spotlight list. Or Command-Click will show the item in the Finder.

Can't find my main iPhoto library after switching to another library. Where is it - its not in list of libraries

I can see the library of photos in Aperture so I know the photos are still there and still organized, but I'm unable to see them in iPhoto after switching to a different library, then trying to go back - where is that library? Its not listed. The desired iPhoto library was iPhoto 11, this one is only 9.6.

First: Locate it.
Right click on the word iPhoto in the Menu bar. This will show you the location of the Library:
Most Simple Back Up:
Drag the iPhoto Library from wherever it is to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

HT4898 After switching to icloud I can no longer get my mail on my phone. Any solutions?

After switching to icloud I can no longer get my mail on my phone. Anyone else have this problem and manage to solve it?

clapsmc wrote:
...and when I try to update my system preferences, my mac-book pro won't save my new server settings, despite me hitting save...Rather, it defaults to the previous settings, the ones I know need to be updated. So, I keep receiving this message when trying to access e-mail:
The MobileMe IMAP server “mail.mac.com” rejected the password for user...
Please re-enter your password, or cancel.

Service PR amount is noyt reduced after Service PO creation in CJI5 report

Dear Experts,
When user created Service PO with T-code ME21, Service PR amount is not reduced from CJI5 report & also increased budget in CJ30.
But when user create PO with T-code ME21N, Service PR commitment is getting reduced after Service PO creation in CJI5.
Please explain & propose solution.
Thanks & Regards,
Arvind

Hiiii...
Note that there is no difference between creation of purchase order via the t.code ME21 or ME21N...what might be your problem in increase of assigned values is because the buyer (purchase dept) is not referencing the purchase requisition at the time of creation of purchase order as a result of which the system is not reducing the purchase requisition committment.
Hope this helps....
Regards
Kaashif M

Automatic creation InternalOrder inECC after Service Order creation in CRM

Hi,
After Service Order creation in CRM, the automatic creation of Internal Order in ECC not happening, needs to be do the related settings. Can anybody share the stepts for the same to do the settings.
rgds,
balu

Hello balu,
Have you released all items?
Also,please make sure that against the item category "Assign BW/CO" is set to Service.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

OS X partition becomes corrupt after switching from Bootcamp

So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?

Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

My itunes won't open after switching to lion

My itunes won't open after switching to lion

I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
https://discussions.apple.com/thread/3800524
Oliver

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

Clicking noise after downloading the security update...

Hi,
I was wondering if anyone else's MacBook has a clicking noise after they did the system update for the security,sounds like it is coming from the top right hand corner.
If anyone knows what might be causing this problem, do let me know.
Thanks,
Sam

Could the noise be coming from the hard drive (lower right corner?)
And, is the 'click' the same sound that the HDD makes once, normally, just before the whole computer turns off during shut down or sleep?
My clicking HDD began right after downloading the last Security Update (the one released in May), but I concluded that was just a coincidence. Nevertheless, when I installed yesterday's security update I couldn't help but secretly hope it might stop the clicks. No such luck... I still doubt it has anything to do wuth it. Just thought I'd ask...

Sound issue after switch off HDMI divice

I have installed video card and plug it to TV through HDMI divice, after switching off my TV i have no sound. message that no out put divice is installed.

Hi,
For the issue, please check your Sound setting.
Firstly, let us unplug the HDMI Device.
Meanwhile, please open Control Panel>Sound:
Please check your default sound device to see if it remains use HDMI.
In addition, let us use the Audio troubleshooter, it can diagnose and fix common sound playback and hardware problems.
http://go.microsoft.com/fwlink/?LinkId=260596
Keep post.
Regard,
Kelvin hsu
TechNet Community Support

Noise after switch to Creation m

Similar Messages

Maybe you are looking for