"Noise" during video recording, normal?

Is it normal to hear a hissing/"noise" sound for lack of a better word during video recording on the ipod touch 4? I could be in a perfectly quiet room and I can still hear it. Is this normal or should I return it to a Apple store for another one? I ordered it online but figure going to the local store would be faster.

It has nothing to do with low light at least not in my case. I'm returning it to Apple, I think it's a bad speaker as I ran the memo app in a quiet room (Didn't say anything) and on playback it still made the sound (A shhhhhhhh sound)
Guess I got a bad one

Similar Messages

  • N8 noise during video recording

    When a  Video Recording I hear the noise, but when I play on computer then:
    -> left channel noise + sound
    -> right channel normal sound (no noise)
    Any solution?

    Hey Pietras909, Welcome to the Nokia Forums!
    Have you tried making a recording, covering the microphone and playing back the recording to see if it is still picking up noise? 
    The built in microphone must be damaged in some way, please take your phone to your local Nokia Care Point to repair your microphone in the N8.
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • S90 Static noise during video recording

    Everytime I do video recording on my S90, I can hear static noise during playback.
    Does anyone else face this problem? Is this hardware or software related?

    Update the S90 via OTA
    Once that is done then try again. If problem persist then open dialer and press ####1111#.
    In engineering mode, select back mic test in Item test. This will record via back mic and will playback. If you still hear static during this time then bring it to the service center.
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • IPhone 4 - Which microphone is used during video recording?

    I was wondering if anyone knew which of the iPhone 4's microphones are used during video recording. I'm not completely sure but it seems like only the noise canceling microphone is used, whereas voice memos use the bottom microphone only.

    Exactly correct. Why is was made this way, I have no clue.
    I think both should be using the top mic rather then the bottom as that is were your hand usually is. I think it should be made an option.

  • Iphone shutdown during video recording

    Hi folks! i've got several times a very strange problem during video recording. my iphone 4s (but it happened also to my brother iphone) shutting down during video recording giving the message about low battery.
    to restart the iphone i need to connect to the battery charger but after the boot the battery is not drained. Today for example happened and the battery after the boot while connected to the battery charger was 53%.
    As it happens also to by brother iphone 4s i don't think that it's an hardware problem, and the funny thing is that it happens in a random way. Some tims i'm able to register 1h of video without problems, other times 3m/5m  and the iphone shutdown.

    This is happening with my Iphone 5 with latest iOS. I'll record video and it will rapidly discharge battery. If it shuts down and I plug it in two minutes later it will come back with over 50% battery.
    I've drained it completely dead then charged it for at least 4 hours numerous times. I started a seperate discussion about this and my phone's horrible battery life in general.

  • During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    I know.  Same issue here.  When I'm not recording but have the video camera on, the autofocus works fine.  As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus.  I haven't used the camera all that much because of this problem.

  • Turn off the vibration or message notification automatically during video recording.

    Please add on mechanism to turn off the vibration or mute the message notification automatically during video recording, due to the motor vibration sound always reocrd into the video.

     You could set your phone to silent  http://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490 It's not ideal but it does the trick.  I agree with you, I wish we had an option that if an app/game it's on immersive mode, like while using the camera, we had an option to deactivate the notifications popping and/or the notifications without having to set the phone to silent.  

  • How to turn flash on during video recording N73 ME...

    How to turn flash on during video recording N73 ME ?
    Any hack sort of something ?
    Thanks
    krates

    if your camera settings is on automatic then the flash will be on while recording. that is how mine is set and it stays on.
    everything happens for a reason
    check out my blog @ http://mycellife.blogspot.com/

  • App with continuous autofocus during video recording?

    Is there an iPhone app which allow continuous autofocus during video recording? (W/o tapping)
    Thanks!

    Is there any way to disable continuous auto focus? or at least any setting which can help getting a better video. In My xperia z1 compact , when i take a video, it will always hunt for the focus, result is Jurky video.
    after lollipop upgrade also, things doesn't changed much.
    so can anybody tell, any setting that can avoid this?
    Thanks
    Pavan

  • Z30 auto-focus during video recording after OS update 10.2.1.537

    Why the autofocus doesn't work when using the BB video camera. It is strange that it will autofocus when it is not recording (video camera). It was not like that before the OS update 10.2.1...
    When video recording moving persons or objects or even when u are moving the camera should autofocus automatically.

    yeah. In other words manual focus during video recording only.

  • Disable Continuous Autofocus during Video Recording

    Hi, is there a way to disable the continuous autofocus during video recording? The continous autofocus is very annoying during video recording as the video consistently appear out of focus when during refocusing. There are alot of situations where continuous focusing is not required.
    Can we have a new video focusing mode where the camera will only refocus to an area that is tapped on the screen? This is a very basic feature that is available in almost all other smartphones. Without this focusing mode, the video recording of the Z1 is 99% unusable although the phone has a very good sensor. As the Z1 is Sony's flagship smartphone, I hope that you can add this simple feature as a software update asap. Thanks.

    Is there any way to disable continuous auto focus? or at least any setting which can help getting a better video. In My xperia z1 compact , when i take a video, it will always hunt for the focus, result is Jurky video.
    after lollipop upgrade also, things doesn't changed much.
    so can anybody tell, any setting that can avoid this?
    Thanks
    Pavan

  • IMac 2009 (21 inch) making hard drive noises during sleep mode - normal??

    Hi there guys,
    I have an iMac 21 inch (2009) , 3ghz C2D, 4GB Ram, 1TB hard drive (the hard drive was upgraded straight thru apple, when i bought it i paid extra for a 1tb hard drive, its not a DIY hard drive upgrade)
    aniways, I recently noticed that during sleep mode, occasionally (not all the time) I can hear some faint clicking / hard drive noise, which is really weird because i put the imac in sleep mode and it really shouldnt be doing that no?
    My 13 inch macbook pro 2010 never does this in sleep mode, its always dead silent
    Im just wondering if this hard drive accessing / clicking noise during sleep mode is normal in imacs??

    Im just wondering if this hard drive accessing / clicking noise during sleep mode is normal in imacs?
    No it should not be doing anything but sleeping. The SMC controls sleep, try resetting it.
    Reset the SMC
    • Shut down the computer.
    • Detach the computer's power cord.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Reattach the computers power cable.
    • Turn on the computer.
    Dah•veed

  • During video recording Mobile gets switch off

    When i put my mobile in video recording sometimes  my mobile gets switch off.What may be reason for this.Any solution please?

    have you a memory card installled?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • FCP audio noise during video transistions

    Hi. I have a strange problem with FCP Studio 2.I captured HDV video onto my scratch disk using ProRes 422,and i finish all basic edits and use Livetype templates to generate lower third titles and drop a few seconds of AVI video to which i also add text using Boris text scrambler to superimpose text onto the AVI video in FCP. Once all is done and rendered on the timeline in FCP i can hear strange audio noise/interference a slight distortion of the audio track during any part where a LiveType title or AVI video has a intensive transition used with a audio track associated with the transition. The more intensive the video transition the more distorted (like a slight pop) the audio gets, it is noticeable. when there is no transitions, the audio is normal. Is this just lack of CPU power on my MacBook Pro causing this audio probelm?
    Heath

    Is everything rendered -no colored line above the video clips on the Timeline?
    You might also need to check that all the render options are checked on.

  • Vertical bars during video recording

    Hi,
    I have seen a vertical bar while I was recording a video using the primary camera in my iPhone 5. It appeared twice on the same day, but didnt see it again after that. I have attached the screenshot from the video how it looks, I could see it during the play back too. Is this a hardware issue, though it never occured again, just wanted to check if anyone else had experienced similar issue.
    The phone is now upgraded to ios 7.
    I have also seen issues when i try to resume the display from standby, it filckers for a second and had to press the standby button again to resume.
    -Shak

    I know.  Same issue here.  When I'm not recording but have the video camera on, the autofocus works fine.  As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus.  I haven't used the camera all that much because of this problem.

Maybe you are looking for

  • FS10n Line item display issue

    Hi, When we are displaying line items in credit side of FS10N (double clic option), the result shows some line items with positive sign (It supposed to show only minus sign in all items). Is it correct? Is there a reason? Is it a bug? If someone has

  • In Home Agent problem

    hi, I am running IHA on my Windows Vista Ultimate x64 system & I keep periodiatly getting an error box being displayed with the following info: Script: C:\Program Files(x86)\Verizon\IHA_MessageCenter\CmdVBS.vbs Line:   2 Char:  1 Error:  Library not

  • Can i use a variable instead of a fixed TextField?

    Hello I have to set the readOnly property to some set of fileds DYNAMICALLY (i mean, until run time, i dont know Which fields are readOnly and which are not? based on TYPE (Manager, Officer, Clerk....) of user...i hv to set it . So, i want to replace

  • How to recover PDF files from iPad

    Just recently I had the unenviable problem of a hard disk failure on my Mac Book Pro Now after a data recovery specialist did his work, I just may have most (all?) of my data back but what was lost was folder structure and in a lot of cases filenames

  • Retries for a Webi Report

    Hello, last week we discovered the possibility to set an automatically retry for our Webi Reports in the CMC. Today we discovered a malfunction. The first run of the Webi Report failed but the second one succeeded. The Excel Export is wrong. It looks