Noise issue + DNS Reset request

Below is a link to a screeshot demonstring ADSL stats and uptime for my router/modem
http://clip2net.com/s/3iwOLT1
Internet speed and noise increased roughly two weeks ago following a malfunctioning microfilter - that has subsequently been replaced.
I have read on other posts that following an unstable connection an automated BT system attenuates bandwidth in response ,reducing speed.
I have also read that after 3-5 days of a stable connection the same system will attempt to reverse these precautions in 3DB intervals. And that if this fails to take place I either have an issue with my line (which is extremely unlikely considering the circumstances) and that I should contact a forum moderator in order to process a DNS reset request.
If my research/assumptions are correct I am happy to supply any info further required.
Otherwise I appreciate any advice in advance.
-J.Shelley
P.s I have performed these same tests on the main phone connection with similar results indicating extension wiring is functioning fine.
Solved!
Go to Solution.

you cannot get a DNS reset you mean a noise margin reset
this is your problem
Due to all the disconnections / restarts of your hub you are now in a banded profile you need to maintain a stable connection for 3/5 days and you will start to lift out of the banding automatically
http://www.plus.net/support/broadband/speed_guide/broadband_terminology.shtml
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Intel Aluminum iMac Superdrive Noise Issue

Does anyone else notice that the superdrive inside the iMac makes more noise than the average hair dryer? It is so bad that I cannot even enjoy my DVD. Thank you.

Well, I figured out that it is superdrive "related" now thanks to you. I cannot prevent the noise from occurring with any optical media disc. It seems that the fans kick on and it isn't the superdrive itself making all of the noise. I reset and did all of that stuff, but I believe it's not just my superdrive. My friend has the same iMac and his makes the same "ka-chunk-chunk-tak-tak-varoom-varoom". Excellent description of that noise by the way. I could not have done better myself. Anyway, Seems that it could be the fans, most likely need a new driver/firmware? Could be hardware and that is just the way it is or I am missing something in my system files used to quiet that thing down. I cannot believe it is even an issue. My iMac G4 has a tray loader drive and it's super quiet compared to this $2000 vacuum cleaner machine. Thanks for your help and I may take it in for service depending on what else goes on with my 10.5.2 system. The other day, I counted 10 bugs just as I was working on it for about an hour or two. So many issues and hopefully some updates fix these messes. Now that I mention it...It seems that the eject key ejects the media differently than using the GUI. It spins the disc down and comes out faster with the key on my keyboard, but takes forever and makes a weird quick buzz sound when clicking the eject button in Finder. Input from anyone is appreciated!

Hard Drive dead? - Failed to Issue COM RESET successfully after 3 attempts.

Hello, i think my 13" 2.53Ghz Unibody (mid2009) MBP's hard drive has had it's last spin. I was using it normally in bootcamp, when windows7 froze, so I rebooted holding the power button....windows wouldnt start any more...ok, so i tried to boot into OSX...stuck at the loading screen with the apple.
Went into verbose mode and it stops at "Failed to issue COM RESET successfully after 3 attempts. Failing..." Google says this has to do with the hard drive.
Did a extensive hardware test (boot + D), all OK, booted from install disk and tried to run disk utility, but it crashed when trying to locate the drives (didn't even list the drive on the right pane). Single User mode wont load either, will give the same COM RESET message. I am literally out of options here.
Is there something i can do to either fix this or verify 100% that my hard disk is truly dead?
I have a backup in timemachine so the data is ok, but the timing couldnt be worse, i have no time to fix this now and needed a working laptop, highly frustrating.
thanks for any tips

nobrex wrote:
Hello, i think my 13" 2.53Ghz Unibody (mid2009) MBP's hard drive has had it's last spin. I was using it normally in bootcamp, when windows7 froze, so I rebooted holding the power button....windows wouldnt start any more...ok, so i tried to boot into OSX...stuck at the loading screen with the apple.
Went into verbose mode and it stops at "Failed to issue COM RESET successfully after 3 attempts. Failing..." Google says this has to do with the hard drive.
Did a extensive hardware test (boot + D), all OK, booted from install disk and tried to run disk utility, but it crashed when trying to locate the drives (didn't even list the drive on the right pane). Single User mode wont load either, will give the same COM RESET message. I am literally out of options here.
Is there something i can do to either fix this or verify 100% that my hard disk is truly dead?
I have a backup in timemachine so the data is ok, but the timing couldnt be worse, i have no time to fix this now and needed a working laptop, highly frustrating.
thanks for any tips
Welcome to the Apple Forums!
Your HDD is probably dead, since the error doesn't appear to indicate something wrong with the motherboard. Just buy a new 2.5" HDD. I don't know about prices in Brazil, but here in the US, a 1TB drive runs for around US$100. Also, check on eBay for people who upgraded their drive and are selling their Apple drive. Some will ship to Brazil, and you can score those for $50-100.
I hope you backed up your hard drive. If not, you'll have to do the whole reinstallation process.

IMac error: Failed to issue COM RESET

After my iMac got slower en and freezed i tried resetting the Pram and in single user mode i did *fsck -fy*
then i get the following error:
*Failed to issue COM RESET successfully after 3 attempts. Failing...*
after that nothing worked anymore!!! only the Windows vista partition worked for a day or two. is this a harddrive failure something worse?
Message was edited by: Birkhoff (title changed)

I believe posting relevant facts is productive, & a very relevant fact here is that you are trying to use a drive with an interface (SATA-II) that Apple does not currently support in its laptops.
SATA-I controllers are supposed to be compatible with SATA-II drives, but many of them are not. The problem is how some controllers implement auto negotiation, which is supposed to tell the drive to fall back to SATA-1 speeds with the slower controllers. Some SATA-II drives have a jumper to force the slower speed if auto negotiation doesn't work; some do not.
How this compatibility problem came about, & why the jumper is required, is complicated but the short version is that at least four different specification bodies had some responsibility in producing SATA specifications, & not all controllers were designed to the same standards. This includes not just the controllers Apple has been using but those in many PC's as well.
So I agree that Apple dropped the ball, but not necessarily the way you might think: it should have made it very clear that the firmware update implemented an unsupported interface speed, that it might cause problems, & (most importantly) provided a reversion strategy to the former firmware if it did.
Hopefully, Apple will take another 'swing' at this & either provide that reversion strategy or a new update that at least allows the controller to work more reliably with the faster interface. But until then, unless your drive has the jumper, my previous suggestion is probably the best you can do.
BTW, none of the current mechanical drives available for laptops can saturate a SATA-1 bus except for brief bursts from the drive's buffer, so the real loss in performance of running a single SATA-II drive at SATA-1 speeds is almost negligible, something you might notice in a benchmark but not in real-world use.

Failed to issue COM RESET successfully after 3 attempts. Failing...

Just in case anyone else has this problem, and wants to claw their eyes out.
I upgraded the Hard Disk in my MacBook Pro about four days ago (the new MBP, summer 2009 with SD card). I installed a Hitachi Travelstar 7K320. It worked awesome for about four days, until I went to run the EFI Firmware Update this morning.
My machine stopped booting. I held Command-V to get the verbose boot output, and eventually got the message: Failed to issue COM RESET successfully after 3 attempts. Failing... - which is where the boot halted.
I removed the Hitachi and restored the stock drive, and the laptop now booted fine. I think it's something Apple will have to look into.

I believe posting relevant facts is productive, & a very relevant fact here is that you are trying to use a drive with an interface (SATA-II) that Apple does not currently support in its laptops.
SATA-I controllers are supposed to be compatible with SATA-II drives, but many of them are not. The problem is how some controllers implement auto negotiation, which is supposed to tell the drive to fall back to SATA-1 speeds with the slower controllers. Some SATA-II drives have a jumper to force the slower speed if auto negotiation doesn't work; some do not.
How this compatibility problem came about, & why the jumper is required, is complicated but the short version is that at least four different specification bodies had some responsibility in producing SATA specifications, & not all controllers were designed to the same standards. This includes not just the controllers Apple has been using but those in many PC's as well.
So I agree that Apple dropped the ball, but not necessarily the way you might think: it should have made it very clear that the firmware update implemented an unsupported interface speed, that it might cause problems, & (most importantly) provided a reversion strategy to the former firmware if it did.
Hopefully, Apple will take another 'swing' at this & either provide that reversion strategy or a new update that at least allows the controller to work more reliably with the faster interface. But until then, unless your drive has the jumper, my previous suggestion is probably the best you can do.
BTW, none of the current mechanical drives available for laptops can saturate a SATA-1 bus except for brief bursts from the drive's buffer, so the real loss in performance of running a single SATA-II drive at SATA-1 speeds is almost negligible, something you might notice in a benchmark but not in real-world use.

Issue in soap request SAP Host Control

Hi. I use SAP NW 7.4 SP2 and have issue in next request
POST / HTTP/1.1
SOAPAction: ""
Content-Type: text/xml; charset=UTF-8
Content-Length: 559
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns0="urn:SAPHostControl">
<SOAP-ENV:Header/>
<SOAP-ENV:Body>
    <ns0:MoveIpAddress>
      <aInterfaceName/>
      <aAddress>IP</aAddress>
      <aAddressFamily/>
      <aTargetHost>IP</aTargetHost>
      <aTargetUser/>
      <aTargetPassword/>
      <aTargetInterfaceName>???</aTargetInterfaceName>
      <aConnectionToTarget>???</aConnectionToTarget>
    </ns0:MoveIpAddress>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
maybe does anyone used this request, what I need write in aTargetInterfaceName && aConnectionToTarget aConnectionToTarget - http, tcp or https don't work
Thank you

Hi,
Run the program 'RSTXTRAN' using transaction SE38 and attach the Text object to your TR.
Last time I faced the same problem.
Everything gets transported except Text object.
Hope it will be useful to u.
Revert if not resolved.
Regards
Amit
Edited by: Amit Gupta on May 14, 2009 7:31 AM

I can't remember my security question for my Apple ID. But when I press "send reset request to email" my email won't recieve it. What should I do?

I can't remember my security question for my Apple ID. But when I press "send reset request to email" my email won't recieve it. What should I do?

Wait a few hours and check the spam filter. If you still don't get it, ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102290)

Nikon Images, Noise issues in Photoshop only

I use Nikon cameras and shoot raw files processing them in ACR and then bringing them into Photoshop. I notice that after the images are processed and saved as jpegs. when I look at the final image in a Microsoft film strip browser, the noise which shows in Photoshop disappears in that viewer. In Photoshop I am viewing everything at 100% I cannot figure out how that happens and what is the true quality of the image. I am just wondering where I can see the true final quality of the image. I would rather not use any noise reduction on the images. I do not like the quality of the image after using that tool.
I also shoot with Canon equipment and I never have and noise issue. I am aware that Nikon has noise issues at higher iso's and when the image is underexposed but I am taking that into consideration when processing, I also process in light room and Nikon capture but in those products I know that they have some different algorythums to correct the noise.
Thanks for any comments or suggestions on this issue.

Photoshop is color managed and is using your monitor profile in an attempt at accurately portraying your image. Most image viewers are not color managed.

BlackMagic HD Decklink Noise Issue

Hi all,
Im experiencing a noise issue when broadcasting and capturing with my HD DeckLink BlackMagic Card. This weekend I was broadcasting live using the LiveKey application and I was experiencing a lot of noise in the transmission of the event. Connection was NTSC (Y in) and (Y out) this also happens using the Y, R-Y, B-Y connection too. Please help!
Regards,
Robert C.

I haven't really used the LiveKey application - have you contacted Decklink's customer support? They've been responsive for me in the past...
Patrick

The Ever-present Fan Noise Issue

Has there been a definite resolution to the fan noise issue on the iMacs? My 20' started after about a week while I was watching a movie. I can't really work on it without having iTunes (or some other noise) in the background.
A while ago, I read a post about having it narrowed down to the "Optical Drive Fan" (or something like that) being loose/broken/cheaply built (perhaps a combination of the three) and it made sense when I looked at the back of my mac and covered the vent to listen to the difference.
I haven't heard about anyone getting this fixed and the problem being solved, but I would certainly like to. From the sounds of things, some Apple techs are a little premature to replace logic boards and mid-planes and things of the like. The one that I talked to "hadn't heard" of any noise issues and thought it might be a power supply, but I haven't had the time to take it in yet.
If someone has a definite solution (more than just speculation or complaints), I would appreciate hearing. I don't feel like waiting 1-2 weeks for a part that I don't need, if I just have to take it in to the tech for 45 minutes to tighten a fan.

programs it didn't open: limewire, clamav,onyx, menumeters, my driver for my mouse, and a few others.
CS2 took a while to load as did mac office.
the rendering in CS2 was aweful! now i know why steve said it was no good for pros.
the native apps were quick but not enough to sell me on it.
i had a rev a imac g5 with 2 gigs of ram and it screamed.
i plan to make out my new 2.1 with 2.5 and she will scream as well.
the intel duo is nice..if you like to look at activity moniter and see to cpu's but to me its not worth the hassle of dealing with beta apps and all that.
the g5 is more than capable of handling all my tasks and themsome.
i'm gonna wait to upgrade. unless they come out with something amazing this year.

Firmware 1.1 White Noise Issue

I upgraded to 1.1 from 1.03 and do not have the white noise issue at all. Have 2,000 songs and bunch of videos and about 100 pics. Had 0 problems, iTunes and iPod update all went 100% smooth.
Saw some bad reports, just wanted to let those thinking of upgrading that the problems mentioned do not occur 100% of the time.
I also have no unusual noises and never have had the battery draining problem.
160Gb Classic

It is totally random, there is no pattern to it. It was the day after I updated to 1.1 before the hissing started on my player. It hasn't happened so far today but it may happen later on tonight. I had no issue with the update and all my music, photos and videos remained intact but the hiss and thumping noise you get when you remove the earphones is a real bummer and a total let-down with this new firmware. Check to see if you get the loud noise when you remove your earphones; if you are you may very well get the hissing. It's certainly happening to the majority.
PAUL
Message was edited by: vocrobot

Nexus-switches issues no arp-requests.

Hallo all,
I see a very strange behavior on my two nexus switches.
Both are Nexus 5548 with L3-daughter-cards. Both do l2 and l3-switching, ACL-filtering and other things. Furthermore I have a set of servers connected to both switches in a vPC-setup. All in all I do nothing special.
After reloading the primary switch (vpc-primary, root-bridge for all vlans and hsrp-active with preemption for all SVIs) the switche comes back online and after getting up all links and reconverging everthing the network breaks. After a lot of debugging and curses and connection tries and a few additional gray hairs later I have got it to work by pinging all ip-addresses from the switch that I have previously rebooted.
Later I do some tests to find out what was going wrong. I found out that if I clear the arp-cache I will get the same issue. Pinging from server A in one subnet to server B in another subnet doesn't lead to success, because the switch issues no arp-requests. To make it work just ping server B from the switch and all works fine. The switch does arp, the arp-table is updated and the pings from the server A will reach the server B.
Any ideas?
Regards
Thomas
^^°-°^^

I can post a extraction of the relevant config items.
   - --[ vpc-primary
cfs01# sh run
!Command: show running-config
!Time: Wed Nov 13 08:46:18 2013
version 5.2(1)N1(1b)
cfs eth distribute
vrf context CEPH
vrf context management
ip route 172.31.0.0/20 172.31.8.190
vlan 14
name 172.31.50.0/26_CN/NN/OSDs@DMZ
vlan 4080
name 172.31.48.64/26_NAS.Infrastr@DMZ
spanning-tree vlan 1-129,131-3967,4048-4093 priority 0
udld aggressive
vpc domain 1
role priority 1
peer-keepalive destination 172.31.8.179 source 172.31.8.178
peer-config-check-bypass
delay restore 150
peer-gateway
auto-recovery
ip arp synchronize
interface Vlan14
no shutdown
mtu 9216
description CN/NN/OSDs@DMZ
ip access-group acl-vl14-in in
vrf member CEPH
no ip redirects
ip address 172.31.50.61/26
no ip port-unreachable
hsrp version 2
hsrp 3
    authentication md5 key-string 3-14
    preempt delay minimum 30 reload 60
    priority 255
    ip 172.31.50.62
interface Vlan4080
no shutdown
mtu 9216
description NAS.Infrastr@DMZ
ip access-group acl-vl4080-in in
vrf member CEPH
no ip redirects
ip address 172.31.48.125/26
no ip port-unreachable
hsrp version 2
hsrp 3
    authentication md5 key-string 3-4080
    preempt delay minimum 30 reload 60
    priority 255
    ip 172.31.48.126
interface port-channel7
switchport mode trunk
switchport trunk native vlan 991
spanning-tree port type network
speed 10000
vpc peer-link
interface port-channel100
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
speed 10000
vpc 100
interface port-channel102
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
speed 10000
vpc 102
interface Ethernet1/1
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
channel-group 100 mode active
interface Ethernet1/3
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
channel-group 102 mode active
interface Ethernet1/29
description cfs02_Eth29
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/30
description cfs02_Eth30
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/31
description cfs02_Eth31
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/32
description cfs02_Eth32
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface mgmt0
description oam01_Gi0/19
ip address 172.31.8.178/26
cfs01#
   - --[ vpc-secondary
cfs02# sh run
!Command: show running-config
!Time: Wed Nov 13 08:46:05 2013
version 5.2(1)N1(1b)
cfs eth distribute
vrf context CEPH
vrf context management
ip route 172.31.0.0/20 172.31.8.190
vlan 14
name 172.31.50.0/26_CN/NN/OSDs@DMZ
vlan 4080
name 172.31.48.64/26_NAS.Infrastr@DMZ
spanning-tree vlan 1-129,131-3967,4048-4093 priority 4096
udld aggressive
vpc domain 1
role priority 2
peer-keepalive destination 172.31.8.178 source 172.31.8.179
peer-config-check-bypass
delay restore 150
peer-gateway
auto-recovery
ip arp synchronize
interface Vlan14
no shutdown
mtu 9216
description CN/NN/OSDs@DMZ
ip access-group acl-vl14-in in
vrf member CEPH
no ip redirects
ip address 172.31.50.60/26
no ip port-unreachable
hsrp version 2
hsrp 3
    authentication md5 key-string 3-14
    priority 254
    ip 172.31.50.62
interface Vlan4080
no shutdown
mtu 9216
description NAS.Infrastr@DMZ
ip access-group acl-vl4080-in in
vrf member CEPH
no ip redirects
ip address 172.31.48.124/26
no ip port-unreachable
hsrp version 2
hsrp 3
    authentication md5 key-string 3-4080
    priority 254
    ip 172.31.48.126
interface port-channel7
switchport mode trunk
switchport trunk native vlan 991
spanning-tree port type network
speed 10000
vpc peer-link
interface port-channel100
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
speed 10000
vpc 100
interface port-channel102
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
speed 10000
vpc 102
interface Ethernet1/1
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14-19,991,4078-4080
channel-group 100 mode active
interface Ethernet1/3
no cdp enable
switchport mode trunk
switchport trunk native vlan 991
switchport trunk allowed vlan 2,14,18,991,1299-1400
channel-group 102 mode active
interface Ethernet1/29
description cfs01_Eth29
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/30
description cfs01_Eth30
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/31
description cfs01_Eth31
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface Ethernet1/32
description cfs01_Eth32
switchport mode trunk
switchport trunk native vlan 991
channel-group 7 mode active
interface mgmt0
description oam02_Gi0/19
ip address 172.31.8.179/26
cfs02#

Noise Issues

I know everyone has probably posted about these same noise problems before, but only one or two people posted audio of their noise, so I don't know if we are all on the same page or not.
I have two completely distinct noises coming from my MBP (it is a 1.83 all stock with just RAM upgraded from Apple).
The first one is a hum noise (I know this one seems pretty prevalent) that comes from the right speaker area and goes away when at full brightness or backlight off. Here is a link to a video of the noise:
http://homepage.mac.com/jimdufek/mbp/movies/humming_noise.mov
From what I gather, this is a problem with the power inverter for the display and can be fixed by shipping back your MBP. Has anyone that had this problem shipped theirs to Apple and gotten it back? If so was it fixed properly and how long was your wait?
Second noise issue is a bit weirder. It is a squealing noise coming from somewhere in the middle or under the keyboard. It is very infrequent and if I move the MBP at a slight angle (as if it is resting on my lap) the noise goes away. I have tried PhotoBooth, Bluetooth on and off, Airport on and off, volume max and min, AC power and just battery life and none of them have any change. The noise only lasts for a few seconds and then is gone, but will come back in 10 seconds or in two hours. Below is a video of that noise:
http://homepage.mac.com/jimdufek/mbp/movies/squeal_noise.mov
Again, does anyone have this noise and if so did Apple diagnose it and fix it yet?
I want to get my MBP fixed, but am worried that this second noise is something they will miss and I will ship my MBP only to still have this noise. I am thinking about taking it to an Apple Store (since they will hopefully be able to hear this problem), but can they fix it in store or swap it out for a new one in store?
Sorry for being so long winded - thanks in advance!
DISCLAIMER: The audio in the above videos was boosted on the camera - it is NOT that loud in real life, but it is audible with no electronic devices.
PowerMac G5 Dual 2.0 Ghz - 2.5 Gb RAM / MacBook Pro 1.83 - 1 Gb RAM Mac OS X (10.4.5) Dual 23" Apple Cinema Displays / iPod 30 Gb 5th Gen

ouch that is annoying! but if its not that loud i
dont think you should be posting it at all, it'll
give a wrong impression, because that sound at that
level is annoying. but thanks for sharing!
"if its not that loud i dont think you should be posting it at all, it'll give a wrong impression". What in the world are you trying to say?! I have this same problem (two different types of whine/buzz) and it is REALLY annoying and it deserves to be brought to everyones attention. "It'll give a wrong impression"???? What the ****! GET A GRIP! Its exactly as he/she said it is. ITS ANNOYING and untill you hear this buzzing noises comming from your minute old, $3000.00 MacBook, I really don't think you will understand how bad it is.

Target SNR reset request

After the BT outage a couple of weeks ago I noticed a significant drop in the speed of my broadband connection. It was a little unstable for a few days. The line has now stabilised but my noise margin is now at 12db. I am quite a distance from the exchange but can usually sync at 3.5mb.
At the same time as the BT outage there were also some engineers working on a nearby pumping station which has been the source of REIN for us in the past. I am not sure what caused the instability.
Can I request a target SNR reset? I saw some other threads stating to contact the mods from a link in their profile but I cannot see it (only a PM button). Current stats from the router below.
Thanks.
Mark.
System Info Broadband LAN Firewall Logs Diagnostics
Status Link Configuration Routing DNS Resolution
Summary Status
DSL Link: Connected
Internet: Connected
Internet Details
Broadband Link Type: Built in modem - ADSL
Connection Type: PPPoA
User Name:
Current Internet Connection:
IP Address:
Subnet Mask: 255.255.255.255
Default Gateway: 213.1.175.186
Primary DNS: 217.32.171.21
Secondary DNS: 213.120.234.58
Host Name:
Domain:
MAC Address: --:--:--:--:--:--
MTU: 1500
DSL Details
Modem Type: Built in modem - ADSL
DSL Line (Wire Pair): Line 1 (inner pair)
Current DSL Connection:
Down Up
Rate: 2240 kbs 448 kbs
Max Rate: 1780 kbs 744 kbs
Noise Margin: 12.0 dB 15.0 dB
Attenuation: 61.0 dB 31.5 dB
Output Power: 17.9 dBm 11.9 dBm
Protocol: G.DMT Annex A
Channel: Interleaved
DSLAM Vendor Information Country: {3840} Vendor: {ALCB} Specific: {0 }
ATM PVC: 0/38
Rate Cap: 1780 kbs
Attenuation @ 300kHz: 61.0 dB
Uncanceled Echo: -17.5 dB Ok
VCXO Frequency Offset: -14.6 ppm Ok
Final Receive Gain: 34.5 dB Ok
Excessive Impulse Noise: 0 Ok
Traffic Statistics
IP Traffic Bytes Packets Errors %
Transmit: 351625657 20 0 0
Receive: 572224477 4153842 0 0
ATM Traffic Cells Errors %
Transmit: 12894644 0 0
Receive: 104193898 0 0
DSL Link Errors
Collected for 17Days14:09:48
Since Current Current Time Since
Reset 24-hr int. 15-min int. Last Event
ATM
Last Event
Cell Header Errors 6848 508 2 0:07:10
Loss of cell Delineation 2535 217 0 1:44:44
DSL
Link Retrains: 5 0 0 8Days23:17:08
DSL Training Errors: 2 0 0 10Days10:07:01
Training Timeouts: 0 0 0 0:00:00
Loss of Framing Failures: 5 0 0 10Days9:43:37
Loss of Signal Failures: 5 0 0 10Days9:43:37
Loss of Power Failures: 0 0 0 0:00:00
Loss of Margin Failures: 5 0 0 10Days9:43:37
**bleep**. Seconds w/Errors: 3989 366 2 0:07:10
**bleep**. Sec. w/Severe Errors: 49 2 0 12:19:36
Corrected Blocks: 177145 2095 18 0:01:21
Uncorrectable Blocks: 7740 582 2 0:07:10
DSL Unavailable Seconds: 187 0 0 8Days23:16:47
Solved!
Go to Solution.

Hi markt1891,
Thanks for posting, I'm sorry to see you're having problems with your broadband speed and I'm sure we'll be able to help you get this sorted.
Please use the 'contact the mods' link in my forum profile to send in your details. You can find the link by clicking on my username.
Cheers
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Any one having noise issue running RME Fireface UFX with Logic Pro X on OS X 10.9.1?

I can't seem to get a consistent and reliable no-noise recording. I'm running OS X 10.9.1. My Fireface UFX is updated to firmware v353 and drivers are 1.91. I'm recording into Logic Pro X. I can occasionally get a good recording but eventually all I get is noise. Once the system is in this state I can sometimes reset the core audio by disabling and enabling core audio in Logic preferences. Not sure what the issue is. I called RME state-side tech support. They suggested it was some kind of USB bus issue. So I removed everthing on the bus except for the Fireface UFX. Still no luck. I have a brand new iMac (i7 with 16GB ram non-fusion drive) and a brand new Fireface UFX. Any help would be much appreciated.

" What you're seeing via USB is power management interruptions as the Haswell chipset and Mac OS is adjusting the USB bus to cut power usage."
Sounds fair enough . I'm no so sure it is linked to Fusion drive per se.
As wrote before, I have used Fusion for year without any glitch.
But it all remains a mystery. It's not my job to fix this.
Let's hope it won't take too long before they issue 10.9.2...
I French we say : "Les convoyeurs attendent" , it's also a song

Noise issue + DNS Reset request

Similar Messages

Maybe you are looking for