Noise issue when not playing

I did a AE cs 5.5 project in 8 bpc mode into premiere cs 6 when I'm not playing the video I see noise in the video (See photo 1) when play the video it looks good.
I also included a snapshot of my video card info which I'm using on a Z800 with 24 gig ram.
photo 1
Display card info

I've heard of issues using that codec. Try another as a test. (Or perhaps better yet, File>Dynamic Link>Import After Effects Composition...)

Similar Messages

How to solve the noise issue when connecting an electric guitar?

Hello,
I own a 15'' MacBook Pro of early 2011, with Lion Mac OS X 10.7.2
I have an issue when connecting my electric guitar (Guitar Rig 4 LE) via USB & starting the Garageband '11 (ver. 6.0.4). I tried playing with the settings to get around the fuzziness/noise that's produced when the guitar is connected.
The original software I got with Guitar Rig 4 ALSO had a similar issue, but I solved it by turning down the ''Gate'' volume to get a clear guitar sound. I tried looking for a similar thing on Garageband but no luck. I'm taking the online lessons via Garageband, with all that noise it makes it even harder to learn.
Hope I made my case clear, and I'm looking forward for any suggestions in this technical problem I'm facing.
Cheers

Hey Keith, thanks for your response.
Well, to be honest I had no idea what that was, so I opened Garageband and looked for that option, and it seems I can't access it during the guitar lessons. I tried exiting the lessons to the main window but the option you talked about under the ''Track'' tab was still faded (i.e. inaccessible).
Did I misunderstand you or done it wrong?
The noise even gets WORSE when trying out the Rock Guitar lessons, not so bad on the Basic Guitar & Blues Guitar...
By the way, I did try the ''Aggregate'' Audio MIDI setup thingy from the utilities to enable both ''Built-in Output'' & ''USB PnP Sound Device (which is the guitar)" and didn't solve the problem.
Running out of options. Opt for surgery? haha jk

Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

I am having issues with Mass Storage after upgrading my 8130 to V4.5. I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device. It is not my media card. I still have my old blackberry: the card shows up on both phones and computers. It is not my cables as they work with my old phone. I have also done all the obvious things like pull the battery and play with the media card setting
This guy had the same issue though i never saw resolution:
Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
"On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
Hopefully someone whose genius far exceeds mine will help me with this. Thank You.

I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
Forgot to mention - now I have the OS 4.5.0.127
Michael.
Message Edited by djm132 on 04-09-2009 01:01 PM

IPod Touch shows play icon in top right corner even when not playing

Hi,
Has anyone had the bug where their Touch displays the 'play' icon even though it is not currently playing any music? Mine does this intermittently, and apparently for no reason.
Thanks,
Alex

Was going to start a new topic on this, er, topic but found this thread in a discussion search. I find it kind of annoying - I am constantly checking to make sure nothing's playing to avoid running the battery down. Not a big thing, but ideally they'll fix it in a future update.

BlackMagic HD Decklink Noise Issue

Hi all,
Im experiencing a noise issue when broadcasting and capturing with my HD DeckLink BlackMagic Card. This weekend I was broadcasting live using the LiveKey application and I was experiencing a lot of noise in the transmission of the event. Connection was NTSC (Y in) and (Y out) this also happens using the Y, R-Y, B-Y connection too. Please help!
Regards,
Robert C.

I haven't really used the LiveKey application - have you contacted Decklink's customer support? They've been responsive for me in the past...
Patrick

Ok, i am not terribly familiar with the program premiere elements 12 as of yet, i am having some difficulty at times, current issues...when in play mode, the timeline marker? hiccups backwards then forward as it plays, some of my image clips freeze and do

ok, i am not terribly familiar with the program premiere elements 12 as of yet, i am having some difficulty at times, current issues...when in play mode, the timeline marker? hiccups backwards then forward as it plays, some of my image clips freeze and don't play while the marker keeps going, this also happens when on full screen mode...what do i need to do to correct this problem...currently i am working this on my mackbook 2009. thankyou for your reply.

<moved from Downloading, Installing, Setting Up to Premiere Elements>

How do you fix the ipod when its not playing the music right when it makes noise

How do you fix the ipod when its not playing the music right when it makes noise

Hi Nicole,
Try resetting it (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). The Home screen should redisplay after the reset is complete.
Cheers,
GB

I downloaded audiobook from iTunes. It comes in 2 parts. Part one will not play, only part 2. When I tried to sync to ipod or iphone it prompted,"file could not be reaf from or written to".Can I fix this issue?

I just purchased and downloaded an audiobook from iTunes. I tried to sync it to iPhone 4 and iPod Classic but with both devices got a message"file could not be read from to written to". Then I tried to play the audiobook in iTunes and realized that only part 2 of my 2 part download will play. Part 1 will not play. Is this why I got the message? Is there any way to get another try at downloading my audiobook I just paid $15 for??

Click the Shuffle button at bottom left of iTunes window so the crossed arrows are not blue.

When I record a video on my iPhone 4s, I play it back and it has this buzzing noise playing, even when I focus on something while filming, when I play the video back, you can hear when I've tapped to focus, how can I fix this?

Ever since I got my Iphone 4s, I have noticed that when I film a video and play it back, it has this buzzing noise and when im in the middle of filming a video and I focus on something, you can hear a click where I have focused when I play it back, is this the microphone? can I fix it myself? or do i have to take my iPhone in to be properly fixed? Help Me please!!

See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing.

When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

When I play a movie through iTunes, audio has no issues but video stutters and skips

Hey everyone,
I have a Dell 17R, Windows 8 64 bit, intel i7-3630QM at 2.4 GHZ, 8gb ram, Nvidia GT-650M at 1920x1080 using driver 320.49
When I play a movie in iTunes, the audio works flawlessly but the video will be smooth for a few seconds, stutter and then skip small 2-3 second spots. I haven't noticed that the parts skipped are any more graphically intense than other spots and there is no discernable pattern.
In the past, I have been able to play movies through iTunes with absolutely no problem but when I downloaded this most recent one a few days ago all of my movies have been experiencing the same issue.
When I stream other videos from other sources I do not experience the same problems as I do when I use iTunes. Streaming 1080P over youtube or a similar services is no issue.
I have updated my video drivers to the latest version as well.
I am at a loss, any suggestions would be appreciated.
Thanks!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any help

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

TS1424 When I click to play my songs in the library they will not play and show a circle with an exclamation point in the middle of it, what does that mean and how can I get them to play?

When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.

I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

Anyone had video just not play when on the timeline?

Video is just not playing when pulled down to the timeline. Seems to resolve itself for a bit after I reboot the program.

Using optimized media should be fine to work with given those specs.
Does the problem happen often? When you say it doesn't play, I'm not exactly sure what you mean.
One thing to check for is that the timeline scrollbar hasn't moved (vertically) so that the issue isn't just that you can't see it due to a scrolling issue. This has happened to me a few times -- especially when zooming in/out. I think it's a bug. But all you have to do is scroll up to get your clips back into view.

Noise issue when not playing

Similar Messages

Maybe you are looking for