Noise Ninja for Aperture has been released

from the picture code site ...
+PictureCode today released a plug-in version of Noise Ninja for Apple's Aperture photo editing and management software. The plug-in allows Aperture users to employ best-of-breed noise reduction without leaving the Aperture workflow. The official release is available on the download page.+
http://picturecode.com/news.htm#MacIntel
http://picturecode.com/nn_aperture.htm

with regard to your PS profiles, they will work here ...
+Noise Ninja includes an automatic profile loader that attempts to select the best matching saved noise profile when you open an image. The automatic profile loader looks for a saved profile that matches the camera model, ISO setting, and image type of each image opened in Noise Ninja. The automatic profile loader looks in two folders when searching for a matching profile. It looks in the main profiles folder that is located under Macintosh HD > Library > Application Support > Noise Ninja for Aperture > Profiles. It also looks in the secondary per user profiles folder under Macintosh HD > Users > Username > Library > Application Support > Noise Ninja for Aperture > Profiles. The automatic profile loader looks at the camera model, ISO setting, and image type encoded into each profile's filename until it finds one that matches the image. If any of this information is missing in the image or in the profile's filename then a match cannot be made. If a match is not found then the automatic profile loader does not select a profile and Noise Ninja runs the automatic profiler to create a new profile from the image itself. You can manually select any saved profile by selecting Choose profile... from the Profile drop-down.+
you just need to create the folder and drop them in it ... then auto load will work ...

Similar Messages

Working Skype for Thunderbolt has been released

http://www.androidpolice.com/2011/08/04/skype-for-android-updated-to-v2-1-with-support-for-17-more-devices-yes-including-evo-3d4g-thunderbolt-sgs12-and-more/

As @codiac1881 suggests this is a shortcoming of the current OS. When there is an official solution, there should be no need to cut corners and adopt workarounds. The OS version upgrade on Thunderbolt is long overdue. Where the lifespan of devices is approximately a year, it is 4 months since Thunderbolt has been released and the OS has not been upgraded. The community is not asking to upgrade this to 3.0, they are asking Verizon / HTC to take it up a notch from 2.1 to 2.3 to officially support a ton of capabilities, but for some strange / unknown reason, both Verizon and HTC are holding back.

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version. I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

My mother never opened/registered her AppleCare she bought 1 year ago. I was told I can't use her AppleCare for my 4s I got this month because a newer version has been released, she can't even use it herself. Is this true? Can she get a refund?

My mother never opened/registered her AppleCare she bought 1 year ago. I was told I can't use her AppleCare for my 4s I got this month because a newer version has been released, she can't even use it herself. Is this true? Can she get a refund?

Only one way to find out: call AppleCare.

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

HT5731 I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the

I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the album?

Hello, Edgarflo.
Thank you for visiting Apple Support Communities.
Here is some helpful information regarding preorder albums in iTunes. I would recommend checking to see if you can download the single directly from the preorder album as some artists release a single that is separate from the album and will be a different purchase.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Cheers,
Jason H.

Use Noise Ninja in Aperture or Photoshop?

If I am going to edit an image in Photoshop (eg cloning some clutter out) and want to reduce noise, is it better to do this in Aperture with Noise Ninja and then edit with Photoshop or just send to Photoshop apply Noise Ninja and then make other edits? Is this an option, does Aperture send the Noise Ninja edits across to Photoshop or are these lost?
I am moving to CS6 and will run 64 bit (and Noise Ninja for Mac is still 32 bit ... annoying). Hence my interest in running NN in Aperture.
Of course if Aperture or Photoshop matched NN ...

Very good reasons .
OP -- do you need to use an external editor for any other edits? If so, then use PS as the base file for all external edits. If not ... imho it's easier (and this ease if worth something) to just launch the external editor directly from Aperture.
So _if_ you are going to edit in PS, _and_ you are going to use NN, then call NN from PS.
Put generally, I suggest that you _always_ launch external editors from PS whenever you will be using more than one. This aggregates the edits into layers (at least I think it does) saved as a single Aperture Master. (Each calling of an external editor creates a new Master in Aperture.)
Aside: the handling of externally edited files in Aperture violates the "non-destructive workflow". The implemention is, imho, immature. I'm hoping for a robust solution in the next full release of Aperture.

PR has been released, but i found the plant input is error.

PR has been released, but i found the plant input is error. i want to correct the plant, and i wish the release info is saved, i.e. the manager needn't release the pr again. is it posssible?

Hi,
You can modify the PR but will the changes trigger the Release strategy depends on the configuration which is done in your system.
If the Release Indicator is assigned for triggering the RS if there are any changes in PR the RS will get triggered and if it is not assigned it will not trigger.
Please check the Release indicator configuration on weather the Indcator are set for changes.
Thanks,
Vijay

F110 - Payment Run has been released error

Hi,
When we are executing payment run F110, after parameter entered & payment proposal is created it gives an message payment run has been released without
payment proposal edited & payment run carried out.
pl. help me in this regard.
thank u
regards
santosh

hi Chenu,
thanks for reponse immediately, can u kindly tell in detail why it will go to released state and how to overcome this problem, it happen occassionally not regularly.
thank u
regards
santosh

Problem In F110 with status message " Payment run has been released "

Dear Friends,
We have an Strange issue in payment program...
While executing the payment program they got below Status Messages
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
*Payment run has been released 13.05.08 15:42:58
Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
With same parametrs we have tried to run another payment run but there is no proposals selected...
Question :
1) How can I delete 1st Payment Run Proposal as well as Payment ID's
Could you please Advise Neccessary actions which is required for solving the issue...
Thanks in Advance
Regards
Suresh Polineni

You can delete the payment run proposal in the following sequence
1) first delete the output file
Edit-Payments-Delete output
2) delete the proposal file
Edit-proposal -Delete
3) if u want delete the parameters also in the similar way.
for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
I hope it will provide some clue to clear your problems.
Regards
Madhav

Running F110 with message "Proposal has been released 07/22/10 06:42:33"

Dear experts,
When I made proposal through F110, it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
What could be the reason?
Thank you!

In the first tab of your F110 screen, you'll get the status of your processing. It will update for each event. Check if you are getting things like the following.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been carried out
Posting orders: 1 generated, 1 completed
If you are not getting any of the above, you can check that step and analyse the log.
Since you are getting as released, i think the proposal run has not carried out.
Ravi.

How to find the date on which notification task has been released?

Hi All,
I am an ABAPer, I have a functional doubt. I have got a functional Spec's for which I have to create a report.
Here, I need to retrieve the field for "Date when the notification RECV task has been released".
I have checked and analysed that the data has to be pulled from 'QMEL' and 'AFIH' tables. I have the notification number with me, I need to pull the "Date when the notification RECV task has been released", there are a lot of date fields in QMEL and AFIH tables, I am able to identify the creation date for particular notification. I need to get the release date?
Could someone please help me, what is the field for release date for the notification in these tables (OR) please let me know the transaction be which we can identify the release date for notification task, I'll get the field name from there.
Please help, I dont have any functional consultants around me.
Thanks,
Vishal.

There are no fields for date for release of notification task in these tables.
Please help!!
Edited by: Vishal Saxena on Jun 15, 2009 8:22 PM

ContactSheet X (CSX) v1.4 has been released

ContactSheet X (CSX) v1.4 has been released.
The biggest change with this rev is the addition of PSCS4
support. Other changes include better support for metadata in captions
and templates, improved color profile handling, and improved error
handling. A complete list can be found in the Release Notes link
below.
Download Page
https://sourceforge.net/project/showfiles.php?group_id=173281&package_id=207621
Release Notes and Change Log
https://sourceforge.net/project/shownotes.php?group_id=173281&release_id=641810
Home Page (includes link to PDF docs)
http://ps-scripts.sourceforge.net/ContactSheetX/csx.html
This has been tested on PSCS3/4 on OS X and XP. It may still work with
CS2, I just haven't tested it there this time around.
As always, let me know if you find any problems.
-X

[email protected] wrote:
> I ran this script but I am running into a problem. How come it only does the first five documents in the folder. It will not do that rest. Is there something I have to modify?
Email me me the ContactSheetX.log file (see the README file for its location on
your system) and I'll see if I can determine what's going wrong.
-X (xbytor at gmail dot com)

Itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released. what gives?

itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released. what gives?

Hey Blake Placid,
Thanks for the question. If you have not already done so, I would download and install iTunes directly from the following link:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks,
Matt M.

[ANN] FlexPMD 1.0 - FlexCPD 1.0 - FlexMetrics - FlexPMD Eclipse plugin has been released

Finally, we got there...
FlexPMD 1.0 has been released a couple of minutes ago.
Here is the release note
The big highlight of that release is:
- Eclipse plugin
- FlexMetrics
- FlexCPD improved
I hope you will like, and thanks to Xavi Beumala for developping the Eclipse plugin.
Xavier

Fantastic. Makes working on the errors and warnings so much easier!
One minor issue - it would be nice to be able to select multiple projects and run CPD on them all at once:
https://bugs.adobe.com/jira/browse/FLEXPMD-118
I assume that CPD only runs on the currently selected fodler so to really check for duplicate code you'd have to run it across all projects at once - am I correct?
Thanks for the great work.

Noise Ninja for Aperture has been released

Similar Messages

Maybe you are looking for