Noise output when I scroll or press pause in Quicktime

Whenever I press pause while playing a quicktime video, an annoying buzzing noise plays. Same thing happens when I grab the scroll bar or fast forward. It happens from Internet Explorer and also when playing direct from disk. Any solutions?

I have the same problem with my home button. After letting my iphone 5 sit for a little while it seems like the home button catches something or makes a gritty clicking noise when pushing it. I noticed this a few days ago and I'm debating on whether I should go to the apple store as to it is 30 min away from my house. Did you have any luck going to the apple store for your home button? After pressing the button after it has sat for some time it seems to go back to normal and because of that in afraid the apple people will say there's no problem because its usually only the first 5 or so clicks that you can tell something's wrong. I would say the best words to describe the problem is a gritty almost double clicking sound when the home button is pressed after sitting and especially if its cold. Any replies would be appreciated thanks!

Similar Messages

My MacBook Pro keeps on randomly scrolling on webpages, putting several spaces when I don't press the spacebar and only sometimes makes a space when I press the spacebar. Why is it doing this? Do I have a virus?

I am currently struggling to write this due to my very erratic spacebar. When I press it, it only creates a space about two thirds of the time. When I don't press it, it creates spaces, often several, in the middle of words. This is incredibly annoying and time consuming when writing. If I'm on iTunes or DVD player, it means the media is constantly stopping and starting.
When I am on webpages they will often scroll straight to the bottom, and when I try to scroll back up it won't allow me to and the screen will look like it's jumping, like my instruction for it to scroll up is fighting against an external instruction forcing it down. This 'fighting' effect is also seen with the spacebar issue when it makes several spaces and I press backspace to try and delete the spaces.
I have a MacBook Pro bought in July 2012 using Mac OS X 10.7.5. I use ESET Cybersecurity, which hasn't identified any viruses. I have deleted all internet downloads that aren't from well-known websites, yet the problem persists. It has been happening on and off for about a week, during which time I have turned the computer on and off many times, though today it has been far worse than before. I am worried I have a virus, though can't seem to locate one.
Please, if you can shed any light on the situation, please do! I'm not a techy person at all, so there may be a very obvious reason and solution for this, in which case I apologise for this waste of time. Still, any help would be very very appreciated, thank you!

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

My iMac 2010 27" makes low noises EXCEPT when scrolling with my magic mouse.

It's like a low static electric noise but it stops when I scroll webpages and such with my magic mouse.

It's coming from inside the iMac and turning down/mute-ing doesn't change it and neither does it stop when I plug in headphones. It doesn't stop when I turn off the built in monitor.
The batteries are ok and no phone around. The sound is not like an interference sound. It's more like the sound the harddrive makes except not as loud and higher pitch (i guess).
The sound has been for a while. More than a month but not since I bought it.
Thanks for your reply!

I just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it, i just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it

Ii just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it, i just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it

You should see it in your Purchases page of the App Store.

Revision: How to make tab control stop on a specific page upon pressing Pause?

I have a scrolling tab which scrolls through the tab pages until the user presses Pause. That works. Now I want the tab control to stop on a specific page once the user presses Pause. How to do this?

Well, hopefully I can give a simpler explanation of my project. There is a tab control (right now of 3 pages). I have written code which flips (scrolls) through the pages, one page per second approx. There is also a Pause button. When the user presses it, the scrolling of pages stops and whatever page is shown at the time of Pausing is the page that is viewable. So that could be page 1, 2, or 3 given when the Pause button was pressed.
But now, I would like to implement the feature that when the Pause button is pressed the tab control, through coding, has no choice but to show Page 1 (for example) or whichever page I restrict it to.
Actually I think I've got a idea now after typing this out, but your suggestions are very welcome!
I've attached screenshots of my code to this reply. The first two show Case States in my code (scrolling, not scrolling) and the 3rd isof the Front Panel and the tab panel itself.
Attachments:
TempScrolling.jpg ‏209 KB
TempPausing.jpg ‏194 KB
TempFrontPanel.jpg ‏156 KB

Can i make a button change anchor link when you scroll down the site?

I am trying to make a scroll site.. and i have navigation buttons on the right, a full menu, but also a "1 topic up" button and "1 topic down" button.
Is there any way that i can have those buttons change anchor link when you scroll down the site.
Example:
I am at home, then i press "1 topic down" and gets scrolled to the next topic on the website, but then i cant make the button change to link to the anchor below that, so the button becomes useless after that 1 press.
Is that in any way possible in Muse to make it change link?

Hi
You can try to create different buttons on page positions where down scrolling will be active with separate button actions. For example you click on "I topic down" , page scrolls and there is another button placed with "Next Topic down" , on click this would scroll the page more and similarly along the length of page.
Button with anchor link scrolling down the page cannot be used for different anchor links, creating different buttons with anchors is the solution.
Thanks,
Sanjit

Pressing "Pause" twice causes my Shuffle to move to the next song.

When I am listening to a specific song on my iPod Shuffle, (Thank You For The Venom-My Chemical Romance) which I purchased today via the iTunes Music Store, I press "Pause" and it pauses correctly but when I try to resume play, it switches to the next song in the queue. None of my other songs have this problem, just this one that I purchased today. Also, when I try to press and hold Rewind/Fast Foward, instead of skipping ahead within the song, it automatically Fast Fowards to the next track without opportunity for any movement within the song. Thanks in advance for your help and sorry for my ignorance.

It depends on the iPod shuffle model... Assuming your shuffle is the 4th gen (or 3rd gen) model, do you use automatic syncing or the manual method (drag and drop song on iPod in iTunes)?
This document shows the four shuffle models, and provides general info about loading content on shuffles
http://support.apple.com/kb/ht1719

Visual Studio 2012 - Source Not Available After Pressing Pause While Debugging

Hi,
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location of the dialog in the code and the call stack would show the series of calls to arrive
at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
At first we thought it was a symbol issue since none of the Windows-related dlls had pdbs. None of our workstations are connected to the Internet so I used symchk to download all the required symbols. Despite all of the symbols now being loaded, the
debugger still doesn't show the actual call stack into our code.
Is there a setting somewhere that needs to be set? Or are we out of luck since our machines are never online?
Any thoughts are apprecated.
Thanks.
Visual Studio Premium 2012 (11.0.60610.01 Update 3)

Hi,
Welcome to MSDN.
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location
of the dialog in the code and the call stack would show the series of calls to arrive at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The
call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
According to these words above, do you mean clicking “Break All” as following image?
The error means that our project does not contain source code for the code that we are trying to view, you could refer to
this link for more information.
In order to solve this issue, you could debug it in another machine which can download symbols form Symbol Servers, then copy that
symbols to your machine to test.
You could change the Symbols setting of the Visual Studio of the other machine as following image:
Then copy the symbols in that directory to your machine, and change the Symbols settings to your local directory to test.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When using scroll lock key to save work what keys do I use

When using scroll lock key to save work what keys do I use

Welcome to Apple Support Communities
To mirror your Mac's display onto your TV, press Command and F1 keys. Read > http://support.apple.com/kb/HT5019

Popping noise added when rapid firing

Hello, I've written a sound player class using Clip and SourceDataLine from the javax.sound.sampled package, in J2SE.
My goal is to produce a sound when a button is pressed.
However, if the button is clicked and held, the action and sound will rapid fire.
If the button is clicked once everything is fine. When clicked and held, for rapid fire, the audio sounds like hell with popping and clicking noises added in.
I thought it might be caused by AudioInputStream being opened and closed in SoundDataLine. So I wrote a Clip interface to cache the whole thing in RAM. Still no love.
I've been playing with the entire API since Saturday and I'm at my wits end. Any suggestions. Am I using the wrong API entirely? My box is a Pentium 4, Windows XP.
Thanks in advance, Ray

I had the same problem in a different scenario. Heres a simple solution, create 5 seperate instances of the clip, and play each one seperatly per click. So if they hold it down, it cycles thru an array of clips all containing the same sound. By the time it plays the 5th clip, you can play the 1st one in the array and it would already be finished if it was a short clip, and even if it was a long clip, the poping should be gone. This way it will play the sounds together instead of triggering the same one over and over so quickly.
It's more memory consumptous, but its fast.

In vlc I hear sound ~500ms after I (pressed pause and video stopped)

Hi, In vlc sound plays ~500ms after I pressed pause and video stopped.
In mplayer it's the same. why can it be and how to fix it?
Thanks in advance.
Last edited by imm_yohan (2014-05-09 18:28:55)

clfarron4 wrote:I have this whilst playing videos with VLC, but only when I use VA API/VDPAU hardware acceleration. If I turn off all hardware acceleration in VLC, I get instant response.
It was disabled. I've tried to disable overlay as well, still the same.
It's laptop with Intel graphics 3000 as I can remember..
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Last edited by imm_yohan (2014-05-09 19:00:06)

Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

This article is for startup but it might help. http://support.apple.com/kb/ts2570

I have added/embedded four videos on my website, but when I scroll down, the videos scroll in front of the top menu instead of behind as it should. I have tried changing layers, etc., and nothing works. Can you help?

I have embedded 4 videos on my website. It is a single page, scrolling site. When I scroll down, the videos scroll in front of the top menu bar, instead of behind it. I have tried changing layers, etc., and nothing works. Please help.
Thanks.
Paul W. Norman

Hi,
Kindly create a new layer, via the Layers panel:
Then, right click on the navigation bar, and choose Move to Layer > Layer 2
Ensure that Layer 2 is on top of the other layers.
Hope it helps,
Sonam

My ipod 5th gen is locked and i can't unlock it becuase an i cloud notifiaction has come up saying i need to back it up. But when i got to press okay to the notifiation i cant because i have to unlock the ipod fist, but i can unlock it!

I cant unlock my ipod beciase there is a i cloud notification on top of it, but when i try to press 'ok' to the notifiaction it doesnt work. Then when i try to unlock my ipod or turn it off i cant because of the notifiaction.

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use the iPod touch again. Finally, open Settings > iCloud > Storage & Backup, and make a manual backup

Process.Start - getting different output when running command using this method than I am if I run same command in CMD prompt

Hi
Creating an application to analyze .dmp files - all working well except this odd issue
If I open command prompt and enter this command:-
kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
Then it works and shows me all the output I need (shown at bottom of post)
If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
Dim myprocess As New Process()
myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
myprocess.StartInfo.UseShellExecute = False
myprocess.StartInfo.RedirectStandardOutput = True
myprocess.StartInfo.CreateNoWindow = True
myprocess.Start()
TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
Output when run from cmd prompt:-
C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
1: kd> kd: Reading initial command '!analyze -v;q'
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: afa99150, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
MODULE_NAME: mfehidk
FAULTING_MODULE: 82e3e000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
GetPointerFromAddress: unable to read from 00000000
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
afa99150
FAULTING_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
STACK_COMMAND: kb
FOLLOWUP_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: mfehidk+377d7
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: mfehidk.sys
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwner
quit:
output when run in my app:-
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
Darren Rose

Try it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process. If you notice there is a "-C" before the Filename and Arguments in this example. The "-C"
tells the cmd to execute the commands and then close itself. You can also use a "-K" which tells the cmd to execute the commands and keep itself open. Being you are not showing the cmd window you don`t want to keep it opened because the
user can`t close it so, that is why i used "-C".
I don`t have the program so, you can just experiment to see what it does. Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
Dim p As New Process
With p.StartInfo
.FileName = "cmd.exe"
.Arguments = "-c " & filepath & args
.UseShellExecute = False
.CreateNoWindow = True
.RedirectStandardOutput = True
End With
p.Start()
TextBox1.Text = p.StandardOutput.ReadToEnd
End Sub
If you say it can`t be done then i`ll try it

Noise output when I scroll or press pause in Quicktime

Similar Messages

Maybe you are looking for