Noise reduction not showing in develop module

I have noticed today that when I am reducing the noise in the develop module, the changes are not being represented on the image I am working with, except in the top left hand corner... too small for me to see clearly. But when I switch to Library module, the changes have indeed taken place. Has anyone experienced this? I need a fix because it's a bad guessing game adjusting my slider without seeing results until I switch modules. Haven't had this problem before. A lot of my work is turning out tooooo smooth!! I appreciate any help I can get with this.

Without question noise reduction and sharpening should only be adjusted at 100% view magnification. Hopefully the OP understands why now.
I tried viewing both 21Mp and 6Mp RAW images at 'Fit' magnification in the Develop module on my office system:
Vista Home Premium SP2 64bit
Lightroom 3.4.1
1280 x 1024 Monitor (Calibrated with i1 Display 2)
The 'Fit' size image on my 1,280 x1024 display with side panels up is 650 x 430. I increased the side panels for a 400 x 266 picture size, and tried it with side panels off for a 1,000 x 666 picture size – Noise reduction and sharpening is clearly applied in the Develop module for all of three view magnification sizes!
I would be interested for others to try this and report what they are seeing. I used a High ISO 128,000 RAW image so I could easily see the affect of noise reduction and sharpening controls at the 'Fit' magnification. If you don't see any change, try moving the Sharpening Amount and Luminance controls to 100 and then down to 0.
Note to the OP – Regardless of what you are seeing at 'Fit' view size, only adjust Sharpening and Noise Reduction at 100%. I'm just suggesting that you may in fact have a problem with your system. What Camera and file type are you using, LR version, operating system, and monitor(s)?

Similar Messages

Camera Calibration Profiles do not show in Develop Module LR5 / Windows 7

I have selected three specific camera profiles (Nikon D300, Nikon D700 and Canon G12) and placed them into:
c:\Users\{me}\AppData\Roaming\Adobe\CameraRaw\CameraProfiles\{Nikon D800}
I restarted Lightroom 5 and viewed a RAW photo (not jpg or tif).
But my Nikon D800 or the other two camera profiles do not show up in the Develop Module Camera Calibration drop down menu, nor in the Presets drop down in the Navigator panel.
What am I doing wrong?

DdeGannes wrote:
It is possible to have third party software providers create profiles for your camera that simulate other camera profiles. I have had that done for my Olympus E520 and E300 cameras so that I have dozens of option available.
Yes (to a degree). You can build your own custom DNG camera profiles, that's a good first start. Then you could edit them using the free DNG Profile Editor from Adobe. I'd start with custom profiles for each camera and see if that produces an acceptable match among them.
This may help too:
In this 30 minute video, we’ll look into the creation and use of DNG camera profiles in three raw converters. The video covers:
What are DNG camera profiles, how do they differ from ICC camera profiles.
Misconceptions about DNG camera profiles.
Just when, and why do you need to build custom DNG camera profiles?
How to build custom DNG camera profiles using the X-rite Passport software.
The role of various illuminants on camera sensors and DNG camera profiles.
Dual Illuminant DNG camera profiles.
Examples of usage of DNG camera profiles in Lightroom, ACR, and Iridient Developer.
Low Rez (YouTube):
http://youtu.be/_fikTm8XIt4
High Rez (download):
http://www.digitaldog.net/files/DNG%20Camera%20profile%20video.mov

Changes not showing in developer module

this just started, when I am in developer module and click on the "crop" the image goes gray until I click done on the crop. also when I make any adjustments, they show in the navigator and filmstrip but not on the image in the main developer window. if I click on another picture and then go back, the changes show up, but not when i do them. somehow I broke the program I guess, but don't know how to fix it.
lightroom 5
windows 7 pro
64bit machine

few questions.
which version of tomcat are you using? are you uploading the individual files or a war?

Installed Lightroom cc. photos do not show in develop module. blue rectangle & white cross is all that shows in edit area. photos show in library and icons in develop collection and in navigator not in edit area.

Just installed Lightroom CC. Catalogue updated. Photos appear in library module and can be selected. When I switch to the Develop Module I can see and select photos from the collection icons but they appear as a blue rectangle & white cross on the edit area. The file name is displayed over the blue rectangle but the photo does not show.

I have the same problem,all I can see in develop module is a blue rectangle with two crossed white lines..

Lightroom 3.2 previews of presets not showing in Develope module.

Hey, any idea why LR 3.2 will not preview the effects of presets when scrolling over them in the Develop module? This was a fast way to work creatively with previous versions of LR.
This happens for all presets, including those shipped with LR. Presets "work" but you cannot see effects unless you apply them first. Preview is broken.
Anyone else having this issue or have a fix idea?
Thanks!

THEY SURE DO! WISH I SLEPT MORE...:)
THX!

WSIL not showing successfully deployed modules

In my scenario, I have deployed the already build modules (EAR) to soa_server1. Now I have to use this deployed modules wsdl to build composite application. But after deploying the modules (EJB modules) into soa_server1, WSIL connection not showing the deployed modules.
what could be the possible reasons for this ?
WSIL connection url : http://localhost:8001/inspection.wsil
Thanks.

2014-07-09 16:23:01:583 376 1280 Agent WARNING: Failed to evaluate Installed rule, updateId = {189A8F50-0C3A-4FDF-8BC2-BC23A3EB11FB}.101, hr = 80242013
Please DECLINE the Internet Explorer 9 Irish Language Pack for Windows 7 x64 update and try again.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Space bar zoom not working in Develop module

According to Lightroom help (using F1 button) it is possible to use the space bar to zoom in and out of an image, and as I recall this was possible in both Library and Develop modules in the Beta 4.1 version.
In v. 1.0 it only works in Library module. In Develop module the 'Z' character is the only way to do it (this also works in Library module). It annoys me, and I think it's a bug.
Also according to Lightroom help it is possible to press [Ctrl+ +/-] to select between zoom levels. I can only make [Ctrl+ -] work (zoom out)
Does anyone have these problems?
BTW, I use Windows XP Pro with service pack 2.
Thanks!
Per

Thanks Victoria.
Did you try your PC as well?
I still think it's a bit strange that space bar can be used in the Library module and not in the Develop module. Especially because space bar is unused in Develop module.
Ok, I can live with the 'Z' key for zooming, it just seems a bit strange changing it.
Otherwise I'm very happy with Lightroom. It fit my needs very well.
/Per

Lightroom 6 Develop Module does not show photos, Library Module does show photos

This is what I see in the Develop module after installing Lightroom 6. Lightroom 5 runs fine on the same Laptop. Is this a GPU issue? Configuration issue? End user issue? I'm running a Lenovo T430 with Windows 7 Enterprise 64BIT. I purchased and installed LR 6.0 22-April-15.

I too have the same problem in lightroom CC as you ( after updating on 30/4/15 ) and have looked all over the internet. I had read something in the Adobe forum site suggesting a problem with the Graphics Processor, but it was not specific to our problem in lightroom. When I also checked photoshop ACR, it too showed the same as your screen shot. And all worked OK in lightroom 5 and photoshop 2014. It did not seem to make any sense at all ! I haven't unchecked " use Graphics Processor" option, but I will soon after I reply to you and had a rest after hours of trawling through internet sites looking for the answer. I use win 7 home premium desktop 64 bit on a 1 year old PC.
Thank you GrandpaCamera for your contribution, and a picture is better then a thousand words. By Michael.

Noise adjustments not seen in develop mode, but in library mode

Hi all -
After trying my new copy of LR3, I'm noticing some discrepencies in the library, develop and exported modes. For example, the develop view doesn't show the noise reduction applied to the whole image, but the library mode does - to a degree. The exported image in Photoshop looks somewhere between the library mode and the develp preview. Any reason why? I'd like to get a consistent view which represents the actual changes.

Thank you. However, is there a reason why the libray view shows the applied noise reducton on the whole image preview bu develop does not? While
I do use the 100% box, I'd also like to see how the entire image will look once the noise is applied. Also, for whatever reason the NR looks different in Photoshop somehwere between the library full preview and the develop full preview.
I feel that these sorts of things are far more important than Facebook and Flicker features.

Noise reduction not working on Lightroom 5.4 MAC

I have experienced that the noise reduction that I apply to my pictures is only visible in the develop area of the software. As I switch to library it disappear and the same happen if I export the picture in any kind of format.
I post a screenshot where you can see a sample picture with the desired noise reduction applied (on the right) and the same picture as it shows in the library area (on the left). Switching between this two areas (library and develop) results like a noise reduction toggle.
Dropbox - example.tiff
Is there a way to solve this bug?
Thank you.

Usually Develop-Fit view is crispier than Library or Export, when there has been enough noise-reduction added to an image to make it seem smooth, and people complain that sharpening is not being applied; however, in this situation through extreme noise-reduction settings, an artificial coarse texture has replaced the fine-grained noise which seems to manifest differently in Develop Fit view, and the complaint is that Library has no NR applied.
In more detail, there are two issues, here, both of the user's doing, not LR's:
1) A user-expectation that the Develop non-1:1 zoom is accurate regarding Detail settings. It is not. For years there has been an exclamation-point warning on the Detail settings section that says to view things only at 1:1. If a user doesn't see or ignores this warning then their expectation is wrong, as in this situation.
2) The Luminance Noise-Reduction Detail slider has been increased from the default of 50 to the maximum of 100. This has the effect of converting the fine-grain noise into a course angular texture, which is easily visible at reduced sizes except in the inaccurate Develop Fit view.
In the following side-by-side at 1:1 zoom, the lefthand panel is as per the user settings with the Lum-NR-Detail slider set to 100, while the righthand side has the Lum-NR-Detail slider set at the default of 50, with all other user settings remaining the same:
I would summarize what is occurring not as a bug but a different response of the inaccurate Develop-Fit rendering to a different coarseness of noise that is caused by an extreme setting of the Lum-NR-Detail slider. Since there is no resizing and no sharpening in the Export settings, I don't think the 1/3 bug has anything to do with anything.
It would be nice for the original poster (OP) to describe exactly what is wrong, after knowing that the Develop view is in accurate if not viewed at 1:1.

How do I show the Develop Module settings when I open up an image I've exported from LR 4.4?

Say I have a preset that I use upon import. I import some raw files using that preset but decide to tweak the settings a bit per each image. IOW, now they are different than my preset.
I now export from a tweaked raw file a jpeg. If I later import that jpeg back into LR 4.4 but don't apply any presets upon import (just leave it blank, I don't even check None), when the image is in the Library the "Saved Preset" line over on the upper right says "Custom" so I figure my settings were "embedded" into that jpeg when I exported it.
However, when I then go into the Develop module, all the Develop settings are zeroed out. Is there any way to have the setting sliders represent what I actually did to the raw before I exported as a jpeg? I can't just hit the preset I used upon import because, in fact, the current settings have been tweaked.
Along that same line, is there a choice I can select upon import (of an exported jpeg or tiff or whatever) that says "show current Develop settings" or some such instruction that would take care of this during import. Thanks.

No it’s not possible but you have a record in the history panel for your master (raw file) It will show the date you exported the jpeg etc. If you click on that line it will show all the develop settings to the right e.g. the slider values etc.
You can in fact save them as a snapshot; so if you make further tweaks to your raw file, the settings you used for your jpeg will always be saved.
Most users don’t re-import jpegs because they can export a fresh one at any time. It’s also possible to create a virtual copy from the menu (Photo >> Create Virtual Copy) which can have different settings to your master (original raw file). You can create as many VC’s as you like and they take up no extra space on your hard drive. Because they are virtual they are simply stored in the catalog as metadata.

Noise reduction visible only in Develop area.

My Lightroom 5.4 for mac has a bug in noise reduction. The noise reduction is visible only in the develop area, and while switching to library it disappear. This affects also exported files and published files like flicker's one. I work with raw files taken with my nikon D5100. Is there any way to fix this bug?

Are you viewing these at 1:1 / 100% Zoom or smaller? Can we see screenshots of what you’re seeing at 1:1 zoom? Are you apply Export sharpening? Are you resizing smaller? Flickr does add its own sharpening, I believe.

Color Picker Not Working in Develop Module LR 6

All color pickers in the Book, Slideshow, Print and Web Modules work by clicking in the color picker and dragging to the image then releasing the mouse over the color wanted. However, I am not able to get this to work in the Develop Module.
How can I get the color picker to work in the Develop Module?

I tried UNchecking Use Graphics Processor, and the color picker worked normally.
In addition, it appears the turning the GPU off increased the speed of paint strokes!

"noise reduction" not applied to exported photos

I've always used iPhoto to slightly modify my photos, before exporting and sharing or uploading to Flickr.
But, since yesterday, the exported photos do not include my "Reduce Noise" modifications. When I export them, they include the color, retouch and so on, but they look as they were BEFORE I applied the "Reduce Noise" filter.
When I look at them in the browser, they appear WITHOUT noise reduction.
When I press space to see them zoomed, they appear WITHOUT noise reduction.
When I double-clic to switch to edit mode, they appear WITH noise reduction.
And when I export them (either by dragging and dropping to the desktop or an application, using the export function or opening in an external editor), they appear WITHOUT noise reduction.
I have tried to delete the preferences of iPhoto, but the behaviour of iPhoto remains the same.
This applies to all the photos I've tried it onto. And this never happened before yesterday.
I didn't install anything new, I have no plug-ins or things like that. I've repaired the permissions, even restarted and zapped the PRAM. The only thing I've done recently is install Aperture with the 30 days trial offer. Could this be the origin of the problem?
iPhoto is an important tool for me and has always worked perfectly. I hope someone will help me solve what is a big problem for me.

I sent to the trash the iPhoto preferences I could find and launched it again
This time, I got the same behaviour, but also got console messages, as follows:
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/BilateralFilter.plugin/Contents/MacOS /BilateralFilter and /Applications/iPhoto.app/Contents/PlugIns/BlackAndWhitePointsFilter.plugin/Cont ents/MacOS/BlackAndWhitePointsFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/BlackAndWhitePointsFilter.plugin/Cont ents/MacOS/BlackAndWhitePointsFilter.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/BlackAndWhitePointsFilter.plugin/Cont ents/MacOS/BlackAndWhitePointsFilter and /Applications/iPhoto.app/Contents/PlugIns/BlackAndWhiteFilter.plugin/Contents/M acOS/BlackAndWhiteFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/BlackAndWhiteFilter.plugin/Contents/M acOS/BlackAndWhiteFilter.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/BlackAndWhiteFilter.plugin/Contents/M acOS/BlackAndWhiteFilter and /Applications/iPhoto.app/Contents/PlugIns/SepiaFilter.plugin/Contents/MacOS/Sep iaFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/SepiaFilter.plugin/Contents/MacOS/Sep iaFilter.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/SepiaFilter.plugin/Contents/MacOS/Sep iaFilter and /Applications/iPhoto.app/Contents/PlugIns/SaturationFilter.plugin/Contents/MacO S/SaturationFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/SaturationFilter.plugin/Contents/MacO S/SaturationFilter.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/SaturationFilter.plugin/Contents/MacO S/SaturationFilter and /Applications/iPhoto.app/Contents/PlugIns/ColorCorrectionFilter.plugin/Contents /MacOS/ColorCorrectionFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/ColorCorrectionFilter.plugin/Contents /MacOS/ColorCorrectionFilter.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/ColorCorrectionFilter.plugin/Contents /MacOS/ColorCorrectionFilter and /Applications/iPhoto.app/Contents/PlugIns/LightingFilter.plugin/Contents/MacOS/ LightingFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/LightingFilter.plugin/Contents/MacOS/ LightingFilter.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/LightingFilter.plugin/Contents/MacOS/ LightingFilter and /Applications/iPhoto.app/Contents/PlugIns/EffectsFilter01.plugin/Contents/MacOS /EffectsFilter01. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/EffectsFilter01.plugin/Contents/MacOS /EffectsFilter01.
*18/05/08 00:51:17 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/EffectsFilter01.plugin/Contents/MacOS /EffectsFilter01 and /Applications/iPhoto.app/Contents/PlugIns/EffectsFilter05.plugin/Contents/MacOS /EffectsFilter05. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/EffectsFilter05.plugin/Contents/MacOS /EffectsFilter05.
*18/05/08 00:51:18 [0x0-0xa1ba1b].com.apple.iPhoto[54170]* objc[54170]: Class PlugInLoader is implemented in both /Applications/iPhoto.app/Contents/PlugIns/EffectsFilter05.plugin/Contents/MacOS /EffectsFilter05 and /Applications/iPhoto.app/Contents/PlugIns/RemoveBlemishFilter.plugin/Contents/M acOS/RemoveBlemishFilter. Using implementation from /Applications/iPhoto.app/Contents/PlugIns/RemoveBlemishFilter.plugin/Contents/M acOS/RemoveBlemishFilter.

LR3 camera profiles loaded but not showing in develop

I checked in - documents and settings\all users\application date\adobe\camera raw\camera profiles and Nikon D700 and many more seem to be loaded. However these do not show up in camera profiles in "develop". Anybody any idea why not ?

Hi Beat. I am shooting with a D700 in raw. In the develop area of LR3 and under "calibration" there is "profile: ". In the drop down menu I currently see ACR 4.6 / Adobe standard/ Camera D2X mode 1,2 and 3. It also incudes Camera landscape neutral / portrait / standard / vivid. I normaly use Camera standard as this gives me about what I want, but I have only had LR3 for a couple of weeks now and am experimenting.
If you go into the Adobe LR3 programme under documents and settings and get to camera profiles you see two options under "camera profiles" -- ADOBE STANDARD / CAMERA
CAMERA is from Adobe shipped with LR3 which has 61 cameras showing which are Canon/ Nikon (to include D700) / Pentax and Leica.
IF as you say LR3 knows I am shooting with a D700, why does the camera profile for D700 not show in LR3 in develop and in the area stated in my first line above, or am I misunderstanding somethig here ?
All the best Alan
London UK.

Noise reduction not showing in develop module

Similar Messages

Maybe you are looking for