Noise reduction works in preview but doesn't apply to file

I have a file that I would like to apply noise reduction to. So in the tasks menu I click Clean Up Audio, then under Noise I click Noise... From there I can play with the Noise settings and get it to clean up nicely. But when I hit OK, it doesn't apply the noise reduction. It seems to be doing something to the audio because the waveform changes.. just not reducing the noise as previewed. Anybody know why it wouldn't be applying the effect? Other audio editing options seem to work just fine.

It is a 16 bit 44.1 kHz mono sound effect.. it is noisy and sounds like it could have been 8 bit at some point in its life cycle.

Similar Messages

Artwork doesn't print when printing cd insert, it shows on the preview but doesn't print?

Hi, after downloading the latest version of Itunes, the artwork no longer prints on the cd insert? It shows on the preview, but doesn't print on the insert? It worked fine before and the printer is working fine, it prints color photos and artwork, no problem?

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

PortalApp working on Preview but not on Portal

Hi everybody!
I'm facing a real very strange situation. I've developed a PAR, which contains two Components. One of them calls the other using AJAX & Prototype. I've tried it on my own machine, and works perfect. I've upload the par to the server which will contain the Portal, created an IView for the par, a Page for the IView, and the preview works fine. But the page doesn't work on the portal. The AJAX request fails, and doesn't reach the server....
We're connecting the server via VPN.Can that be a problem?
Thanks in advance, and sorry for my terrible english.
Eneko

If application works in Preview and doesn't work in portal page, it could be a permissions issue.
Did you check the application with same user in both places?
Previewing the iView with administrator rights is not the same as viewing it in portal with some standrard not-administrator-rights user.

XML (RSS) Spry Dataset File Works in Preview But Not Over Internet

hello
I am trying to build a custom feed reader using the Spry framework in Dreamweaver CS4 and everything seems to go smoothly until I actually host the file (with the accompanying js and css files) and try to view it over the internet
previewing from DW shows everything working the way it should
I feel like I am missing something obvious ... but not sure what
thanks for any help!

Hi, i have a similar problem..
These URL returns a XML:
1) http://www.bolsadesantiago.com/intradayServlet?symbol=IPSA
2) http://www.valorfuturo.com/contenidos_vf/proyectos/clientes/penta/titularnoticias.asp
I use a CS4 and both works in preview, but only first works over internet (IE7).
I suspect that 2° has a problem of syntax XML, but work with jQuery.

Flash work in preview but not in the browser!?

Hi there:)
I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
Thanks!
V

Hi John!
Yes, sorry about that.. here it is.
http://farmingtonfarm.com/appraisal.html
Thanks for your help!!
v
Date: Thu, 8 Apr 2010 18:52:05 -0600
From: [email protected]
To: [email protected]
Subject: flash work in preview but not in the browser!?
Can't really help without a link to the site. Can you provide one?
>

Double clicking on a file launches the app but doesn't open the file anymore. Why?

Double clicking on a file launches the app but doesn't open the file anymore. Why?

I would post in the Illustrator forum here http://forums.adobe.com/community/illustrator or the Dreamweaver forum here http://forums.adobe.com/community/dreamweaver. One of these product forums will be able to help.

Are sharpening and noise reduction working in 1.0?

I went to see if they'd made any improvements in the noise reduction area, and can't get any of the noise reduction or sharpening settings to effect the image at all. The settings definitely aren't making any changes to the visible image in normal or 100% view.
I tested this on an ISO1600 image to make sure there was visible noise.
Is anyone else seeing this lack of effect?

The server may think it's serving that page to some user-agents, but it ain't working for any over here:
$ curl -o file.jpeg -v http://learningtosee.org/aux_photos/sharpening_test.jpg
* About to connect() to learningtosee.org port 80
* Trying 204.16.138.5... * connected
* Connected to learningtosee.org (204.16.138.5) port 80
> GET /aux_photos/sharpening_test.jpg HTTP/1.1
User-Agent: curl/7.12.2 (i386-pc-win32) libcurl/7.12.2 zlib/1.2.1
Host: learningtosee.org
Pragma: no-cache
Accept: */*
< HTTP/1.1 404 Not Found
< Date: Mon, 19 Feb 2007 21:31:06 GMT
< Server: Apache/2.0.52 (CentOS)
< Vary: Accept-Encoding
< Content-Length: 311
< Content-Type: text/html; charset=iso-8859-1
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 311 100 311 0 0 2159 0 --:--:-- --:--:-- --:--:-- 0
* Connection #0 to host learningtosee.org left intact
* Closing connection #0
$

Fireworks Rollover Works in Preview but Not In Dreamweaver

Hey,
I have created a rollover image in fireworks, which works in the preview option on fireworks.
I have exported it as : html & images, exporting slices.
This works when I open it straight from the file BUT when I try pasting it into dreamweaver (insert -> image: fireworks html) the box where the rollover image appears but with a cross in it.
I have also tried copying the html from fireworks into dreamweaver but this doesn't work.
When I try this the image appears and the link works BUT the rollover doesn't?
This is the code I use:
<a href="www.whereartyou.co.uk/reviews/evahesse" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Page1','','<img src="images/Page 1_f2.gif" width="400" height="310" />',1)"><img name="Page1" src="file:///C|/where art you/images/Page%201.gif" width="400" height="310" border="0" id="Page1" alt="" /></a>
Thanks in advance for any help or suggestions.
Cheers

This doesn't appear to be a Flash related posting, so you might get better results in the Dreamweaver forum...
http://forums.adobe.com/community/dreamweaver/dreamweaver_general

Works in preview but not when published in captivate 8?

My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

IPod Shuffle 2nd Gen. not working, music plays but doesn't sync\

Hello,
I have an iPod Shuffle 2nd Gen since a long time and it always worked perfectly. But now it has stopped working well. It has music stored inside and it plays it, it evencharges from the pc, but doesn't sync in iTunes, nor it shows up on Desktop. On iTunes the message in Italian says idt couldn't be identified and to reconnect the iPod and retry. I tried the Reset Utility but it says my iPod isn' supported even if it is a 2nd Gen iPod. The only positive thing is it shows up on System Profiler.
I tried also turning off the iPod for 5 seconds and turning it again on, but the issue is still there.
Have you got any suggestions?
Thankyou

Actually it turns out I can't even add to it. It claims it's synced to another library (which apparently is true, being as it was last used with my Macbook Pro). Somewhat new question, How do I combine the two libraries, as it's all mine, just on two different computers, one of which doesn't work unless it's in Hard Disk Mode.

Popups work in preview but not in compiled help

Hello,
I am using Robohelp 8 and have been having problems displaying popups in my compiled help. When I view a topic that contains popup links in the WYSIWYG, I can preview the popup topics with no problem, but when I compile and click on a link that contains a popup, nothing happens. I get a warning in the bottom of the browser window that says "Error on page" with no further details. Is there a setting somewhere that I need to adjust. I have never had this problem before.
Thank you in advance for any input.
Adrienne

Hi there
The popup functionality depends on the ehlpdhtm.js file. Years ago I had a large project where popups broke in topics that were heavily buried in a deep folder structure. I managed to make them work by amending the path to the js file so it was shorter. This also meant I had to copy the js file to the folder where the popups were broken.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Flash image viewer works in preview but not online

Hi
I followed an online demo on how to get an image slideshow on my webpage using flash. It was using insert media image viewer. It all worked fine, looked great in the preview but when I put everything online I can't see it. Just an empty space were it should be. This is the site where it is
http://www.idoityourself.com.au/ if tried moving the image to different areas in case it didn't like being in a folder within a folder etc but still didnt work. Any ideas??
thanks

http://www.idoityourself.com.au/Scripts/AC_RunActiveContent.js File not found.
You have not uploaded the Scripts folder to your server which DW generated automatically for you when you inserted the Flash.

PayPal button action works in preview but not when published

Hi!
Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista). Any thoughts or insight would be appreciated. Also, I'm new to flash and here's the button action:
on (release) {
        //create the LoadVars that will hold our paypal information
        var paypal = new LoadVars();
        //specify the business, amount of the item, shipping, etc.
        paypal.cmd="_xclick";
        paypal.upload="1";
      paypal.business="[email protected]";
        paypal.currency_code="USD";
        paypal.amount="275.00";
        //paypal.handling = "0";
        //paypal.no_shipping = "0";
        paypal.item_name="One Session";
        //added
        //paypal.lc="GB";
        paypal.bn="PP-BuyNowBF";
        //paypal.no_note="1";
        //send our information to PayPal, including all the optional variables we have collected from customer
         paypal.send("https://www.paypal.com/cgi-bin/webscr","_blank","POST");
Thanks!
Robert

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

Simple buttons working in Preview, but not on iPad

Hello everyone. I have a Button (I'm working in InDesign CS6), with instructions "Go to State". It links to a photo on a seperate layer. The link works perfectly in the SWF preview (shift-command-return). But when I update the file to view it in Adobe Viewer it does not work. (I am using Viewer Vers 25) There are no other functions on the page that could be "blocking" it. In fact, on some pages where there are two or three buttons (all of them with instructions of "Go to State"), 2 may work and one not. I am confused as to how I can see it working in the Preview, but not on the iPad. Any suggestions appreciated. Many thanks!!

Bob, just got in and downloaded the patch - the buttons are working perfectly now!!
Thank you for taking the time to help me out!! I'll be more diligent from now on in checking for updates. Thanks again. James

JDev3.0's JSP and Applet works on NT but doesn't work on Win98, why?

JDeveloper3.0 works fine on WindowNT machine when I run JSP files and Applet, but at home the JDeveloper3.0 cannot trigger the browser to display the result on my Windows98 machine when I run the JSP files or Applet. Why? How can I make it works for me at home. Other tools, such as J++6.0 and JBuilder work with Applet on the same machine. Who can help me?

James,
The JDeveloper 3.0 design time environment is not supported on Windows98. Some functions might work under Win98 but they are not supported.
Sorry!
Regards,
Arun

Noise reduction works in preview but doesn't apply to file

Similar Messages

Maybe you are looking for