Noise & shapness when view files in Bridge

I am a CS6 user, good but not advanced. I recently upgraded from a Nikon D3 to a D4. When viewing D4 files in Bridge after downloading the images (files) appear to contain a lot of noise and to be unsharpe; they appear sharp on the LCD screen on the camera. I have not experiences with my D3. I believe I have set my preferences properly. When the files are opened in CR or CS6 the noise seems to go away and sharpness is normal; the images print up tack sharp. Any idea what's going on? I'm through out some files that appeared bad, but may have been good.

In Bridge choose folder with bad images. Click Tools/cache/purge cache for xxx folder. If this solves problem purge cache for rest of system, either globably, or if you have cache exported to folders then the Tools/cache method.

Similar Messages

MD5 Checksum Changes When Renaming Files in Bridge?

Just like the title says: MD5 checksum seems to be changing when renaming files in Bridge
Is this normal? Is there anyway to disable this? Checksums do not seem to change when renaming a file outside of Bridge (ie; in Windows Explorer or Mac Finder).
Ken
P.S. System is Windows 7 using Bridge CS6 (64bit)

Thanks for the quick reply Curt.
Until you just now asked the question, I could not explain why it should not change. Now, if I understand correctly after googling around a bit, it appears the hash can be computed either with or without the filename (among other things).
Apparently Bridge computes the hash including the filename. It seems there is an option to compute the hash based only on the file contents (ie; without the filename). My assumption was that by default, the checksum was generated using only the files contents (ie; without the filename).
I'm hoping someone can comment definitively on how Adobe Bridge does it and whether or not there's a way to change it.
Ken

Items "date modified" column when viewing files as list in finder

I'm not really sure if I can change this viewing option, but i will give it a try:
when viewing files as list in finder, "yesterday" items "date modified" column shows up with the term "yesterday", while this does not happen for "today" items, where what shows up is just today's date and not the term "today".
I found this rather confusing, since it is not immediate: i.e. if I want to check for items modified today at a glance, i need to pick today's date from a ist with a number of different dates. As a matter of fact, it's a way easier when checking for yesterday's items.
Suggestions anyone?
Thanks!

toygal wrote:
I am new to Aperature and not very computer savvy so please provide "dummy's guide to" responses.
toygal -- welcome to the Aperture user-to-user forum. iPhoto was designed with you in mind. Aperture is 100x more complicated (and no faster). I strongly recommend that you revert to iPhoto and use it. Compared to Aperture, it will bring you more pleasure and cause you much less frustration. Whoever told you that Aperture is faster not only was wrong, they failed to take into consideration the hours that you would have to practice to become comfortable with it.
Here are some threads which briefly touch on the difference between iPhoto and Aperture -- use the search to find many more.
http://discussions.apple.com/thread.jspa?messageID=13183439&#13183439
http://discussions.apple.com/thread.jspa?messageID=12906017&#12906017
http://discussions.apple.com/thread.jspa?messageID=12901779&#12901779
Message was edited by: Kirby Krieger

Erratic behavior when viewing files

Hello,
I've had a multitude of problems lately, but in short I have a new hard drive and have topped out my memory at 3Gb. However, I still do not understand why when viewing images and documents from Macintosh HD -> Home Folder -> Search this is still happening: the file list will not stay still! The list keeps bouncing around like a ping pong ball, no matter what viewing mode I am in. It is really annoying because I am fighting to scroll down and when I find a file to drill down on, the list jumps and I lose my place. The "jumping" seems to be happening at regular intervals, perhaps every 5-7 seconds.
I have also noticed that all stock Adobe (Photoshop Elements) images are highlighted in green. I never noticed this before, and I don't know if this has anything to do with my problem or not. But I do know that when I bring up these "jumping" file lists, the first file the list seems to be fixed on is the first Adobe stock image on the list, even though it is never the first file in the list (no matter how the list is sorted).
Any comments or suggestions are welcome. I Googled this issue using many different combinations of keywords with no useful search results. I can't possibly be the only person on the planet who has experienced this problem.
Thanks.

Problem solved, or at least alleviated, by turning OFF File Vault.

How do I remove the small cross that is in the centre of a shape (when viewing the outline)?

How do I remove Shape cross hair from the middle of a shape please. I am using Illustrator CS3. I am making an image to cut out using a Cad Cutter so i am using the VIEW OUTLINES OPTION. I have used cirles in my compostion and when I view the outlines there is a tiny tiny cross in the centre of the shapes? I am unable to remove these and if i leave them on, then the printer will cut a cross in it's place which is what I don't want.
Please can someone tell me how to remove the cross hairs, not from Normal view becuase they aren;t there but from the OUTLINE View.
Thanks so much, I hope someone can help.

This is the Feature request forum but select your item and then open the Attributes panel. On the left side are two boxes. Make sure the left box is highlighted.

Can't preserve opacity and gradients when viewing file outside of illy.

Okay, so my image is basically a series of very intricate geometries, (made up of lines), superimposed over an image of the milky way.
Some of the lines have 85 opacity and some have radial gradients applied to them.
I'm wanting to email my file to someone who doesn't use illy, for them to view so I want the file to be able to be viewed in whatever program eg; acrobat.
So I saved it as a pdf and opened it to make sure it looked the same but to my dismay the image didn't preserve any opacity or gradients.
I'm sure it's something really simple but I'm a total illy noob so I have no idea what to do. It's quite important that I send this file asap and as it looks when in illy with opacity and gradients.
Would be very grateful if an adobe guru out there could help me asap!

When you saved the file as a PDF which you choose in the first dialog box that comes up on saving you will get another dialog box in which you choose the version and settings for the PDF. Try something like the following
then
and then
See if this works.

Can't preserve opacity or gradients when viewing file outside of illy

lOkay, so my image is basically a series of very intricate geometries, (made up of lines), superimposed over an image of the milky way. Some of the lines have 85 opacity and some have radial gradients applied to them. I'm wanting to email my file to someone who doesn't use illy, for them to view so I want the file to be able to be viewed in whatever program eg; acrobat. So I saved it as a pdf and opened it to make sure it looked the same but to my dismay the image didn't preserve any opacity or gradients. I'm sure it's something really simple but I'm a total illy noob so I have no idea what to do. It's quite important that I send this file asap and as it looks when in illy with opacity and gradients. Would be very grateful if an adobe guru out there could help me asap!
Sorry about the link, only way i could cut and paste details from last discussion >>http://forums.adobe.com/message/3736183#3736183
previous post details everything that was suggested to fix the problem. I also mention that I was using a cracked ver of illy which was not the case, turns out it was a trial ver. Der. Clealy I'm not all that tech savvy.
If anyone has any ideas outside what was suggested in the last post I'd be very appreciative, Quite confused, and might I say a little bit frustrated, as to the nature of my problem

Hey thanks for the reply. I dont have indesign, but I think there should be a solution within illustrator. I mean why have opacity and gradients if you cant use them outside the program eg; for printing or pdf's. There must be a solution for this. I dont know much about indesign but I doubt that would work as the problem occurs when the image is viewed anywhere but illy, which means that its not saving or converting the transparencies. Tried to open in PS as a jpeg but that doesnt work either, no go as a pdf through acrobat and no luck as a bmp either. Thanks for your suggestion though.

Can't override AI10 when opening files from Bridge or Explorer.

I have Illustrator 10 installed (on windows 7) because I need to work with .cgm files. The problem is that I can't double click to open .ai files in my newer Illustrator CC, they always try to open in AI10. Yes, I've changed the file type association in the windows control panel. It is set to Illustrator CC, but it still opens in AI10. I have to go to AICC every time and use the File > Open menu. I am always forgetting and double clicking files, then I have to wait for AI10 to open, then close it down. Other than uninstalling AI10, I can't figure out how to fix this.

Okay, I think I've finally figured this out. I had to reset the file associations inside the Bridge Preferences. All it was offering me was Illustrator as an option. I had to drill down into the programs to the Illustrator CC.exe file. Why wouldn't that show up as a option in the first place? Anyway it seems to be working now.

Lines on Image when opening files from bridge to PS4

I just installed PS4 and when I open an image from Bridge CS4 to PS4 the image in PS4 has horizontal and vertical lines and strange colors. I have contacted tech support numerous times to no avail with a solution. I still have PS3 extended installed on my computer and don't know if this might be contributing to the problem.
Any thoughts or suggestions on how to resolve this issue is greatly appreciated. Thanks

OpenGL is disabled in PS Preferences.
When you have done everything recommended in previous posts, does the problem persist?

Resetting default version of Photoshop when opening files in Bridge

This issue is on a Windows 7 machine.
I use PS 2014 as my main editing program.
Recently added PS CS5 to utilize filters in the older version.
Bridge now sees CS5 as the default editing program.
How do I get the default back to being PS 2014 with Bridge?
TIA,
Brian McNeill

Ron,
The file types association under preferences in Bridge was what I ended up
resetting. Tedious, but effective, unlike some registry hacks which did not
provide any relief to the problem.
Thanks for the follow up.
Brian McNeill

"Out of Memory" Message When Viewing Files

What the origin of the "out of memory message"? I can't view a 1.3 MB pdf and am wondering what the source of this message is. Any ideas? TIA.

Not to be rude or insult intelligence, but What format is the timeline in. Not the video files (It's great that you put them to PR422, but if your timeline's native format is something other than PR422, Final cut is going to try to render files in that format... )
And Again please define "Huge"... How big of a hard drive are you using, and how much RAM space do you have? I checked your profile for any further information, but found none. these are key things to helping figure out your problem.

Why do I keep getting low memory errors when opening files in Bridge CS4? (New computer running i7 2.40GHz, 12GB RAM)

Just picked up a new computer which has a lot more RAM than my old computer bu I keep getting low memory errors. Never had this issue on my old computer, any ideas?

Windows or Mac? (If the former, I can't be of any help.) Exact version of your OS?
How much available disk space? Do you have a separate hard drive for Photoshop's scratch file?

After editing camera raw and export as jpeg,image becomes overexposed when view on light room..please advise.

need some help here. don't know if i can describe this accurately.
i was using lightroom previously. edit my raw file and then export in jpeg. everything appear normal as what i wanted.
recently i got cs4 and started using bridge. now after i edit my photo in lightroom and export,the view of the jpeg file appears overexpose(exposure was increase) and when view on adobe bridge same problem. but if i open photoshop and use my workspace colour setting everything is ok. when i see my picture on iphoto it is normal as per i have edited. i just don't know what setting i have touch that cause my viewing of edited photo on lightroom and bridge goes overexpose. on bridge,thumbnail ok but preview bad...
for the record: i just install CS4 and snow leopard recently. before this i have no problems with LR. I'm also not sure if i have accidentally change any settings.
i shoot with a 5D mark 2 and use the raw file for edit.
will appreciate any advise. Thanks

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

In Lion 10.7.5 is there a way to view files in alphabetical order in column view?

In Lion 10.7.5 when viewing files/folders in column view, if I select arrange by name it does not sort the names alphabetically. Is this a bug or is there a way to view files in alphabetical order in column view?

I've been using Column View for years and have it set to None:
It has always shown in alphabetical order automatically.

Error in Cs3 extended when opening files.

hello Guys,
when I open a file i get the error
ADOBE Photoshop CS3 Extended:Photoshop.exe - teopassingsfout ( dutch for application error)
The pc is member of a domain. I installed the legal software on users account with administrative privileges.
Start the program without error untill opening a file.
Does anyone has a solution for that please?

Do you get an error when opening files from Bridge into Photoshop?
Does the same happen when you open Raw files with Camera Raw?

Noise & shapness when view files in Bridge

Similar Messages

Maybe you are looking for