Noise when I touch the area in front of the touch pad. How do I fix it?

A weird sound is caused when I touch the area in front of the touch pad. How do I fix it?

May be you should take the computer to the Apple store to have it checked.
Best.

Similar Messages

WHAT ARE THE NUMBERS IN FRONT OF THE SONG NAMES (I.E. 1,50,31)

what are the numbers in front of the song names?

When iTunes rips or converts a file, it prepends the name with the track number.

My itunes songs wont sync to my ipod touch 4th generation,but my apps are fine. And the songs EVEN play on my computer. How do i fix this? thanks

My itunes songs won't sync to my ipod 4th generation,but my apps are fine. And the songs EVEN play on my laptop. How do i fix this? THANKS!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS1717 I purchased a copy of Sandra Lee magazine. It loaded but is not clear and a square and triangle are in front of the pages. Can you help?

I purchased a copy of Sandra Lee magazine. It loaded but is nnot clears and a square and triangle with arrow are in front of the pages. What can I do?

This document shows the four types of shuffles
http://support.apple.com/kb/HT1719
If the music that is currently on the iPod is not your music, it would be inappropriate to discuss how to transfer it to your computer in Apple's discussion forum.

My pictures are saying delivered when sent through iMessage but the person isn't actually getting them. How do I fix this?

My pictures are saying delivered when sent through iMessage but the person isn't actually getting them. How do I fix this?
My pictures send through iMessage only to certain people. And others the message is saying " delivered" but the person on the other end isn't getting any of my picture messages and sometimes regular iMessages with no pictures.

I was sure this curse was an Android feature since I had it constantly with my Nexus phones for the last two years, but sure enough it affects iOS8 too. Turn off wireless and and your MMS will go out fine over cellular ever time (in my experience anyway). Ridiculous, right?

We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync.

We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync the applications we have.

An iPod can pn;y sync wiht one iTunes kibrary and the new computer is a new iTunes library:
- Transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party probgram like one of those dicussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup

When I Share my project using QuickTime the top of my video is chopped off, how do i fix this?

when I Share my project using QuickTime the top of my video is chopped off, how do i fix this?

What version of Premiere Elements and on what computer operating system is it running?
- Mac OSX; Premier Elements 11 v11
Where is the audio in the project - numbered audio tracks, Narration Track, and/or Soundtrack? Any chance that you are using a XviD.avi file?
- audio is either in the soundtrack , or in audio 2 when part of a video
Besides the full properties of your source file including file extension, what are the full export settings that you are using presumably for Publish+Share/Computer/MPEG?
- i was just using the default for MPEG, which is the NTSC DVD standard, file type MPEG2-DVD
What player are you using? Does the file playback video and audio using the VLC player? Does the problem exist in a new project?
- i have tried in quicktime and VLC, both have the same effect (picture works, staccato background noise). I have not tried in another file, but will do so now.

I was trying to update/restore my ipod and now i plug it in and it stays frozen on the usb to itunes picture. and when i plug it in it dosnt come up in itunes how do i fix this?

i was trying to update/restore my ipod and now i plug it in and it stays frozen on the usb to itunes picture. and when i plug it in it dosnt come up in itunes how do i fix this? any suggestions are appreciated

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?

My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?

You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

keokipineapples schrieb:
I do have all of my files I am working on located on an external drive. I plan to transfer them directly to the hard drive
Transfer them to your harddisk immediately.
External drives are not offiially supported and the source of errors of all kinds including complete loss of files.
Illustrator support for networks and removable media

When I downloaded the Mavericks Operating system to my MAC computer, the mac stopped recognizing my T4i camera. How do I fix this.

When I downloaded the Mavericks Operating system to my MAC computer, the mac stopped recognizing my T4i camera. How do I fix this.

Apple has an article stating that your camera's digital RAW format is supported. I don't know if that implies the camera too.
http://support.apple.com/kb/ht5955
The Canon website says the drivers are either already installed or you don't need them for Mavericks.
They do have some updates for the Canon software.
Some more details of, "stopped recognizing my T4i camera," might be helpful.
If you are looking to transfer pictures/movies, can you just plug the card into the Mac or into a card reader?

I receive an error message whenever I text recently entered contacts. It says the number is invalid. I have tried entering the number with the area code and without the area code.

I receive an error message whenever I try to send text messages to new contacts. It says the number is invalid and to enter a 10 digit number. I have tried entering the phone number with the area code and without the area code. Any ideas?

Same problem here. I've deleted the contact and had them text me, but when I try to text them back I get the same invalid number message! So frustrating! Please help!

About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it?

About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.

Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
Russ

Noise when I touch the area in front of the touch pad. How do I fix it?

Similar Messages

Maybe you are looking for