Noisy CDRW when waking from sleep

I see there is a firmware update if I have a superdrive to make the drive quiet when waking from sleep.
http://support.apple.com/kb/HT3744
Thanks,
Joe

Getting this same error since switching from Firewire to USB. I have a Maxtor drive in an Adaptec enclosure. It has it's own power supply and both USB and Firewire 400 connections. Just upgraded to a new Mini from old Powerbook, so no more Firewire 400!
The big difference between USB and FW:
With the old PB G4 and Firewire, when I put it to sleep, I could hear the external drive actually spin down. On wake up, It would spin up and mount properly. Now with the Mini and USB, when I sleep the Mini, the external drive NEVER SPINS DOWN. I did some research and found that many drives have built-in power management that basically powers them down after some idle time. So the Mini is going to sleep with mounted drives, at some point later the drive sleeps itself, then when the Mini wakes, the drive's not there.
Obviously, Firewire is doing a better job of talking to my external than USB. I'm ordering a FW400-to-800 cable and will test this. I also think it has something to do with the chipset/firmware in the external enclosure, as many people are reporting their external USBs behave properly during sleep.

Similar Messages

Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

IMac loses connection to network when waking from sleep

Hi There,
We are a small mixed environment of Macs and PCs running on a Windows 2008 domain. One of 2 iMacs that now run Mountain Lion 10.8.5 is having problems when waking from sleep. One of our designers will go for lunch and the machine will sleep for about 30 to 40 minutes. Upon her return the iMac will kick her off of the 3 shares she usually logs into (2 are on Win2008 machines, and 1 is a MacPro running 10.6.8 Server).
If she has files open in any of the Creative Suite Apps, the app will crash and she will have to restart the whole machine. If no files are open then she can usually reconnect to the shares after a short while. Obviously I told her not to leave any files open, but its causing her some headaches.
Its also creating srv errors (id 2012) on our domain controllers, when she tries to wake her machine.
This Imac is a late 2009, and we have a 2011 model that has no issues at all. Both are set exactly the same.
I have reset SMC, Pram, and rebinded to the domain, and searched through these forums quite a bit to no avail.
Any thoughts or suggestions would be much appreciated.

I am continuing to work on this issue, and have tried a number of things based on searching here and elsewhere.
And Lucky Me, I have been able to replicate this behavior on one of other Macs (imac 2011, on 10.8.5). I also see errors on 2 separate Windows file servers on the domain (Event ID: srv 2012).
Below I am posting what seems to be the relevant area of the log.
Nov 14 11:48:04 PrePressMac2 kernel[0]: Wake reason: EHC1
Nov 14 11:48:04 PrePressMac2 kernel[0]: Previous Sleep Cause: 5
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfd000000) may have caused a wake by issuing a remote wakeup (2)
Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795216: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795224: switchVap from 1 to 1
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Keyboard Hub (Port 3 of Hub at 0xfd100000) may have caused a wake by issuing a remote wakeup (3)
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Apple Keyboard (Port 2 of Hub at 0xfd130000) may have caused a wake by issuing a remote wakeup (3)
Nov 14 11:48:04 PrePressMac2 kernel[0]: HID tickle 117 ms
Nov 14 11:48:04 PrePressMac2 kernel[0]: TBT W (1): 0 [x]
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e1 for display 0x003f003d
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e2 for display 0x003f003e
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e3 for display 0x003f003f
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e4 for display 0x003f0040
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:05 PrePressMac2 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
Nov 14 11:48:05 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 type 'smbfs', mounted on '/Volumes/PrePress', from '//aconti@GAIA/PrePress', not responding
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 found 1 filesystem(s) with problem(s)
Nov 14 11:48:10 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0321,0de1,0300,c5e1,7800]
Nov 14 11:48:12 PrePressMac2.local configd[19]: network changed: v4(en0+:192.168.1.184) DNS+ Proxy+ SMB+
Nov 14 11:48:12 PrePressMac2.local SophosAntiVirus[67]: reloading scheduled scans...
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net configd[19]: setting hostname to "prepressmac2.cutpasteandprint.net"
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: label: default
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           dbname: od:/Local/Default
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           mkey_file: /var/db/krb5kdc/m-key
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           acl_file: /var/db/krb5kdc/kadmind.acl
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net rpcsvchost[1049]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
Nov 14 11:48:12 prepressmac2 kernel[0]: Sandbox: sandboxd(1050) deny mach-lookup com.apple.coresymbolicationd
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.037506C4-0B10-5 70D-A7B6-B3B8F7AE0CC6.plist
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/.GlobalPreferences.plist
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1056]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1058]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:16 prepressmac2.cutpasteandprint.net nsupdate[1061]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:17 prepressmac2 com.apple.launchd[1] (com.apple.smb.preferences): Throttling respawn: Will start in 5 seconds
Nov 14 11:48:17 --- last message repeated 2 times ---
Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:18 prepressmac2.cutpasteandprint.net nsupdate[1067]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:18 prepressmac2.cutpasteandprint.net netbiosd[92]: name servers down?
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1069]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
Nov 14 11:48:22 prepressmac2 kernel[0]: smb_iod_reconnect: Reconnected share PREPRESS with server GAIA
Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache(): record unique ID for 'PrePressMac2' not set
Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache() Accessing network user record from Active Directory not allowed because no authentication information was supplied.
Nov 14 11:56:25 prepressmac2 com.apple.launchd.peruser.1997381720[389] ([0x0-0x4a04a].com.adobe.InDesign[630]): Exited: Terminated: 15
Nov 14 11:56:34 prepressmac2.cutpasteandprint.net spindump[1100]: Saved hang report for Adobe InDesign CS5.5 version 7.5.3.333 (7530) to /Library/Logs/DiagnosticReports/Adobe InDesign CS5.5_2013-11-14-115634_PrePressMac2.hang
This is from the 2011 iMac, and I see something very similar to this on the 2009 machine.
I continue to think this is a software issue related to 10.8.5 and Adobe CS (CS5 on the 2009 machine and CS 5.5 on the 2011) as this appears to have come up only since the recent update.
Any help would be appreciated.

My MBP doesn't remember my Time Capsule wireless network when waking from sleep

My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep. Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password. This is very cumbersome. And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem.
It appears that this problem has to do with the hidden SSID. I don't need the lecture on how hidden SSID provides no serious security benefit. That's why I have the WPA2 encryption. I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
Solutions I've alread tried:
1. Open Network Preferences
2. Select Airport from left hand column (and ensure Airport is at top of that list)
3. Select Advanced
4. Delete all Preferred Networks.
5. Apply settings.
6. Restart computer
7. Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
This solution works fine as long as I don't take my computer elsewhere and connect to another network. As soon as my preferred networks list gets another network, my MBP stops finding my TC network. Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network." Thus, I assume the problem lies with the Time Capsule.
Any ideas?

LaPastenague, thanks for weighing in. Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently. With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
When an SSID is hidden, the base station does not broadcast its identification. Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality? Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP? And once broadcast by the MBP, the TC should detect and reply?
Basically, the MBP can connect to the hidden TC manually just fine. The MBP can connect to the old setup automatically just fine. The MBP cannot connect to the TC automatically. Aren't these automatic connection functions solely on the MBP?
I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
Z

Keychain is read-only when waking from sleep

So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

Hello-
Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete
7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
7/10/13 6:53:14.354 AM configd[18]: network changed.
7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
7/10/13 6:53:18.519 AM blued[65]: Read version 2 info. Number of devices:2
7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
7/10/13 6:53:20.635 AM kdc[54]: label: default
7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
7/10/13 6:53:24.499 AM digest-service[87]: label: default
7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
7/10/13 6:53:25.671 AM kdc[54]: KDC started
7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503 root: no
7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a] @ 0x0x7fe8b9e31660 because it's already been started.
7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows.
7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

Kernel Panics when waking from sleep? 2012 MBA Base Model

I've been having some trouble with my 2012 MacBook Air. It was running perfectly until about 2 weeks ago. Now, when waking from sleep, I am getting Kernel Panics that force the restart of my Mac. I was wondering if anyone could provide insight on the issue.
An example log file is below:
Mon Jun 17 18:34:31 2013
panic(cpu 0 caller 0xffffff802c4b8655): Kernel trap at 0xffffff7fac9bb786, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002e792000, CR4: 0x00000000001606e0
RAX: 0xffffff80389af900, RBX: 0xffffff8096e07000, RCX: 0x0000000000000002, RDX: 0x0000000000000004
RSP: 0xffffff80a54f3dc0, RBP: 0xffffff80a54f3de0, RSI: 0x0000000000000002, RDI: 0x0000000000000000
R8: 0xffffff80389c4000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8038986800, R13: 0x0000000000000002, R14: 0x0000000000000004, R15: 0x0000000000000002
RFL: 0x0000000000010246, RIP: 0xffffff7fac9bb786, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a54f3a60 : 0xffffff802c41d626
0xffffff80a54f3ad0 : 0xffffff802c4b8655
0xffffff80a54f3ca0 : 0xffffff802c4ce17d
0xffffff80a54f3cc0 : 0xffffff7fac9bb786
0xffffff80a54f3de0 : 0xffffff802c83a02c
0xffffff80a54f3e30 : 0xffffff802c8364f1
0xffffff80a54f3e80 : 0xffffff802c841694
0xffffff80a54f3ec0 : 0xffffff802c835ccb
0xffffff80a54f3ef0 : 0xffffff802c84138d
0xffffff80a54f3f30 : 0xffffff802c84708a
0xffffff80a54f3f80 : 0xffffff802c8471b9
0xffffff80a54f3fb0 : 0xffffff802c4b3137
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7fac99b000->0xffffff7fac9f6fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fac972000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x000000002c200000
Kernel text base: 0xffffff802c400000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 4372661007505
last loaded kext at 244544510921: com.apple.filesystems.msdosfs          1.8.1 (addr 0xffffff7fae0e8000, size 65536)
last unloaded kext at 304724110055: com.apple.filesystems.msdosfs          1.8.1 (addr 0xffffff7fae0e8000, size 57344)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp          4.2.6
org.virtualbox.kext.VBoxNetFlt          4.2.6
org.virtualbox.kext.VBoxUSB          4.2.6
org.virtualbox.kext.VBoxDrv          4.2.6
com.silex.driver.sxuptp          1.10.1
com.globaldelight.driver.BoomDevice          1.1
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
com.apple.driver.AGPM          100.12.87
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleBacklight          170.2.5
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.ApplePolicyControl          3.4.5
com.apple.driver.AppleIntelHD4000Graphics          8.1.2
com.apple.driver.AppleIntelFramebufferCapri          8.1.2
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.XsanFilter          404
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AirPort.Brcm4331          615.20.17
com.apple.driver.AppleAHCIPort          2.5.2
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          5.6.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleGraphicsControl          3.4.5
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.iokit.IOAcceleratorFamily          74.5.1
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOBluetoothFamily          4.1.4f2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.7.8
com.apple.iokit.IOThunderboltFamily          2.4.0
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IO80211Family          530.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.6.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

The problem stemmed from something related to USB. I suggest uninstalling the third-party software responsible for installing these items:
org.virtualbox.kext.VBoxNetAdp          4.2.6
org.virtualbox.kext.VBoxNetFlt          4.2.6
org.virtualbox.kext.VBoxUSB          4.2.6
org.virtualbox.kext.VBoxDrv          4.2.6
com.silex.driver.sxuptp          1.10.1
com.globaldelight.driver.BoomDevice          1.1
Alternatively you can boot into Safe Mode which will not load those device drivers, and see if you panics cease. If they do, then you can uninstall the software. BTW, the current version of Virtual Box is VirtualBox-4.2.12-84980-OSX.

Mac Pro restarts when waking from sleep

Hi everyone.
I just got a brand new Mac Pro (2 x 2.66GHz), and had Apple upgrade the RAM to 2GB (4 x 512MB). My first problem is that the computer always restarts when waking from sleep, which is annoying! I have reset the SMC by unplugging the machine for a minite, but the problem persists. I have also tried sleeping the computer with nothing plugged in except the monitor and keyboard/mouse, but I get the same problem. All software/firmware is fully up to date.
I have also just noticed that the System Profiler states that there is only 1GB RAM in the computer, even though I am sure that it recognised 2GB when I got the machine a fortnight ago (I even have a screen shot of 'about this mac' to prove it!). Can anybody help, or do I need to phone Apple support?
Thanks,
Matthew

I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

Detect display when waking from sleep?

Is there any way to force the display detection when waking from sleep? I find that if the mini wakes before the monitor is on, i get a blank screen. When the monitor is on before waking, everything is normal.
I have the DVI-Detective, and the problem is actually worse when using it -- nothing is detected when waking up, no matter if the display is on or not.
My specs:
OS 10.5
C2D, 2Ghz - 2GB RAM
Sharp Aquos 52inch
All standard HD resolutions work fine - it's just now a matter if figuring out how to force the mini to detect the display...
Surely there must be a way to do this?

Great that you got it working. It seems what is happening when the TV is switched off is that the Mac can no longer see the EDID data. Basically, it's the same as if a hot-unplug event had occurred from OS X's perspective. The mini thinks the TV's video cable has been unplugged, so it thinks it is running headless, which of course it is not. And for some reason not completely clear to me, when the TV's power is restored, a hot-replug event is not triggered and the mini still thinks it's running headless. Maybe you are right that it is removed from the list of connected devices for good. But it isn't supposed to work like that.
The DVI Detective is the right tool for the job in cases like this, so it's good you have one and it's good you got it working. I agree it would be nice if there was more override control within OS X for times like this when things go wrong. But if more TV and 2nd/3rd tier monitor makers paid more attention to computer plug-and-play, then these things would work right in the first place. Your TV is in violation of the plug-and-play standard because the standard calls for the host (Mac mini in this case) to be able to power the ROM and I2C bus within the TV even if the TV is in a powered down state. Clearly your TV isn't doing this.

Resolution change when waking from Sleep

I will at times hook up my MBP to a plasma display to show photos. Now-sometimes when waking from sleep (and not attached to an external monitor), it reverts back to 800x600. I have to go to SP to displays and re-detect the MacBook display. Unpredictable and frustrating.

Lets get a few details straightened out first:
1. What cable are you using to connect? DVI, VGA, HDMI, component, composite, s-video, etc.?
2. What resolution is it when you connect? If your plasma is an HDTV, it is capable of taking much higher than 800x600, so depending on the cable you use, you can adjust that to make it higher or even the same native resolution.
3. When you disconnect, is the computer running, or closed/sleeping? If you close, then disconnect, it might think the display is still connected. Or, rather, after switching resolutions back, later on when you open it up it suddly changes to a lower res?
In the meantime, in system prefs, in "Displays" check the box that says "Show displays in menu bar" and then you will get a menu up top to choose your displays and resolution sizes. That will at least make it easier to change.

Missing sound + missing USB power (sometimes) from Thunderbolt Display when waking from sleep

Hi
Two problems - one of which is driving med crazy!!
Have the latest updates, and the display is connected to a MBA (mid 2011).
The two are almost alwayes connected, and every time I wake the MBA from sleep, the Thunderbold Display does not "support usb sound" - the sound options are only MBA and headphones. Only a restart will give me the option to use Thunderbolt as sound output: WHAT TO DO!?!?!!
Sometimes when waking from sleep the USB in the Display seems to be "off" - the will not charge my devices (iPhone, iPad etc.). Only reboot seems to fix this... I have seen this in other discussions but not found a permanent solution - any thoughts?

Same here but reinstalling OSX is a bit drastic. I solved the problem by deleting a preference.
Go to Macintosh HD then System then Library then Preference panes then Sound.prefPane
Delete Sound.prefPane (you need to type your password).
Logout or restart.
This has happend twice this week so WHY is this suddenly occurring?
Hi,
I found this solution in the forum, but I can't find it again. I had cut and pasted it into a text file, because it solved my problem. I just don't want to take any credit for it. It did work for me. I had no problems for 3-4 weeks with the monitor, I have had the sound problem since last Friday. Very frustrating.
BSGINC

Desktop Wallpaper Screensaver Bug? [When waking from sleep]

I'm not sure if this topic is in the correct category but it seems to fit.
I have a new 15.4" MacBook Pro with OS 10.6.3. I have multiple images that I want as a wallpaper and so I decided to select "Change picture" in the preferences pane. I also selected "Random order" and chose "When waking from sleep" as the time for the wallpaper to change.
However, if I close my lid, and then re-open it, when the computer wakes up, instead of the wallpaper changing, it changes twice.
Now, this isn't really a problem but it can get annoying sometimes and I was wondering if this problem is due to something I do, rather than the operating system.
Thanks.

I just noticed something, perhaps this will help? There appear to be two kinds of sleep, display sleep and computer sleep. I noticed that if my machine is running (playing music, for instance) and the display goes to sleep, when I use the mouse to wake up the screen the background changes. So maybe when I wake up the machine from computer sleep it changes once for waking from computer sleep, and once more for waking from display sleep?

Monitor Blanks in and Out When Waking From Sleep

Since getting my Mac Pro (with Apple installed RAM and NVIDIA GeForce 8800 GT), I've noticed that the screen does not immediately turn on when waking from sleep, as my older Macs did. Rather, it turns on for a split second, goes blank for two seconds, turns on again for a split second, goes off again for a second or more, and then comes on permanently.
This behavior only occurs when waking from sleep; it does not occur when the monitor turns on from the active screen saver.
Is this normal for the MAC Pro with an NVIDIA GeForce 8800 GT? I have a HP w2408h monitor with a DVI to HDMI cable. Everything else works fine, including all video behavior.
Thank you.

Hm. Bluetooth, interesting. Thanks for the idea.
I just opened the lid to see about the BT setting and the display didn't go off-on. The BT is off, I'm pretty sure I did that when setting it up as I don't use BT for anything.
I wasn't suspecting anything was seriously wrong, it's just that quick-on feature was highlighted as a selling point and I was curious about the glitch, if it was a setting I could change, for instance like you've highlighted. Annoying when things don't work as advertised.
And if I show the machine off to colleagues and friends, that will be a bad first impression they will want explained.

Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?

It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

Workaround for the problem of ultrabay HDD ejecting when waking from sleep

After trying every possible "solutions" with no luck for the problem of the second hard drive always ejecting/disconnecting when waking from sleep in my T530, I've decided to create my own workaround.
This is by no means a definitive solution but a nice workaround that uses little resources on the machine.
The idea is to simply let a program runs constantly from the second hard drive. That way, when the HDD tries to disconnect, Windows is not allowing it and then it stays allways connected.
To make it more thansparent I decided to create a Windows service that starts when Windows boot and stops when Windows shutdown.
This Windows service is very lightweight : it does absolutely nothing and just waits indefinitively.
The trick is that it just have to be started from the second hard drive.
Here is a link to the Windows service, 32-bit and 64-bit, with the source code and scripts to install/uninstall.
Just install it anywhere on the second hard drive (D: in my case).
https://docs.google.com/file/d/0BxusNBl7tTO-Y3J5VDB3d2lQRzg/edit?usp=sharing
Works perfectly for me on my T530 with Windows 7 Pro x64.

Hmm, I have no problem with Ultrabay ejecting HDD when waking from sleep mode. At first, I went down the same
route as you did. For the first few days when I received my T530 I kept an .iso file from Ultrabay HDD always mounted.
But then I disabled all power saving options within Windows and Lenovo Power Manager and it seems to work fine.
Works both with Windows 8 (64-bit) and Windows XP Professional (32-bit).
T530: i7-3630QM, 4 GB DDR3-1600, NVS 5400M, 2x 500GB 7200RPM, 9-cell, HD+ 1600x900, Backlit US, WinXP Pro
L430: i3-2370M, 4 GB DDR3-1600, HD 3000, 320GB 7200RPM, 6-cell, HD 1366 x 768, Win7 Home Premium 64-bit

IBook no longer asking for a password when waking from sleep or screensaver

My iBook was fine until I installed the Security Update 2006-002 via software update. After the "required" reboot (reboot #1) everything functioned as normal.
On a subsequent reboot (#2) and several other reboots trying to correct the problem (#3-#5) I've found that my iBook no longer asks for a password when coming out of the screensaver, or when waking from sleep.
Yes, I have checked the security pref panel every time and have ensured the checkbox is checked. I even Sudo'd the panel just to be sure.
I downloaded the aforementioned security update and re-applied it. It corrected the problem during the same "required" reboot (#1), but after rebooting the computer a 2nd and 3rd time the problem has came up again.
I wish my iBook wasn't sick! Thanks, I tried searching as best as I could to see if this is a repost.
iBook G4 1.2 Mac OS X (10.4.5) All updates via Software Update
iBook G4 1.2 Mac OS X (10.4.5)

I don't have a specific fix but this generalized fix seems to take care of most problems for me. Download Cocktail, Onyx or MainMenu then run Rebuild Launch Services database, the maintenance (cron) scripts, clean all caches then Repair Permissions and restart.
To test it don't keep restarting, that's extra wear and tear on the computer, just put it to sleep and wake it or log out then back in.
If that doesn't work get Disk Warrior and rebuild the directory.
And if that doesn't work do an archive and install then one big upgrade.
But don't go past running one of those three utilities until you see if someone has a better fix for you. It might be as simple as trashing a preferences file.

Noisy CDRW when waking from sleep

Similar Messages

Maybe you are looking for