Nokia 1020 high battery usage

I have used my new 1020 for a couple of days. The problem I have is the battery use, and I have read other people that have had the same problem, and that they needed to get the phone replaced to get it fixed.
But Im trying here first.
the problem I have is that the battery life is extremly short. If I use the phone as ususal, calling, sending emails and maybe check something on the web, I only get about 3-4 hours before the battery is empty. Today I really checked everything, turning all background programs off, turning down the screen brightness etc etc. I still have like 15-20%/h of battery usage.
I then turned on the "battery saver" thing in the control panel, but that did not make any difference at all. Is there something else I can do before getting a replace phone?

I replaced it. Now it works perfect. I would like to say thanks to the Nokia people regarding the service. I called the supportnumber, explained the problem and he told me to get back to the store and get a replace. No problems, no "dumb" questions. Just got it replaced.
Some difference with the support I had with an iPhone some time ago. Same thing, bad phone from the box. First they did not believe me, then I had to get to the store where they made a reset of the phone. Then I had to come back again because it did not help, and leave the phone for repair. Sure I got a new one, but it took 2 weeks and a lot of trouble.

Similar Messages

Lumia 1020 | High battery usage

Hi,
I´m wondering if 20% battery usage while doing some whatsapp messaging and internet browsing per hour is the normal behavior of the Lumia 1020?
I only have battery sense, Bing weather and Whatsapp activated as background tasks. Bluetooth and NFC is turned off. I usually close my apps after using them so I only have one or two apps running. Screen Brightness is set to low.
Thanks!
Attachments:
wp_ss_20131215_0001.png ‏151 KB

Genrally I just use anything I like when I have access to top up, ie sat at m,y desk using usb charger, if out and about tend to turn off most apps and radio antenna to save power, or carry mobile charger with me. As you proved either flight mode or not using the phone drastically reduces power consumption. My phone generally lasts the working day even if used heavily, if I am busy actuallt working and not playeing on my phone it will have over 60% left at the end of the working day and that's with Twitter, FB and two mail accounts running along with a couple of other apps, Bluetooth , wifi and 3G.
If whatsapp is the culprit , just turn off when you know you will not be able to get a top up charge.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Problem solver for high battery usage iphone 4s............

i keep seeing many people on here with this problem with the battery! 5.01 upgrade with the 9a406 version will significantly improve your battery life.
i did a restore through itunes and it updated to this new version and it works great! i have been told that some people only are getting 9a405 back when they restore.
if so download the upgrade, the instructions are all on here if you look for them, also how to install through itunes. good luck guys.

Well im on 9a405 and my battery is fine lasts for days so i dont know what people are on about the battery life is way better than my iphone 4
PS its a 4s 64gb simfree/unlocked bought from apple that i have

WP8.1 35% battery usage in an hour

After installing WP 8.1, I'm facing a strange issue, I charged my phone to 100% about an hour ago, but now it shows 65% remaining.
The weird thing is, the new battery saver usage statistics shows really high battery usage for apps that i've never used after installing WP 8.1 update. And they are all background usages according to the battery saver.
Is anyone else facing a similar issue?

In battery saver usage statistics, Internet Explorer is on top and about 70% of it's battery usage is in background.
2nd one is the default Camera app, 100% in background
3rd app on the list is Angry Birds GO, 100% in background
4th one is google mail account,
5th is a TV app, i dont even remember when i've installed it
6th is OneDrive, 100% background usage but background usage of the app has been disabled.
7th is Speedtest.net app, I've used it a couple of weeks ago, that's all
I've used a few apps after installing WP 8.1 preview and IE is one of them, the other apps that I've used was at the bottom of the list, that's really weird.

High % battery use is "standby" after Lollipop 5.1 on Moto X 2013

Thanks to AT&T for finally pushing out Lollipop to the Moto X 2013, it love it. Except, now the highest user of battery, buy a significant amount, is "cell standby". What is doing this and how can I "fix" it? Cell standby never showed anywhere close to the top of the list of battery use until the upgrade.

Tried all of the ideas that one can actually do; the battery isn't removable on the Moto X, of course. Nothing, including factory reset, solved the problem of high battery usage on Cell Standby.
I was able to have no use of cell standby almost all day today by turning off Location Services. For some unknown reason, in a two hour period this afternoon, in the same location in my office as I had been for the rest of the, even with Location Services off, it burned 14% in cell standby.
This is quite apparently an issue with Android 5.1 that AT&T pushed via OTA update. I understand that AT&T has stopped the OTA updates for the time being. Hopefully, when they resume, this issue will be fixed and they will include us with a patch for the problem, and any other problems that compelled AT&T to stop the push.
Anyone else have any other ideas?

High CPU usage - Rapid Battery Drain - Running HOT

Looking for help.. PLEASE!
Z10 - Model STL100-3 Software release 10.2.1.2179
Symptoms;
Occasionally, and for no apparent reason, I notice my Z10 getting hot in my pocket. I run the device monitor App and see a very high CPU usage, which consequently drains the batter very quickly.
I've tried all the solutions from every support group thread and blog. And I mean ALL!
Pulling the battery
Replaced the battery
Removed the SIM
Deleted G Mail
Removed all 3rd party Apps (2)
Stopped email sync
Stopped calendar sync
Turned off all radio
Turned Off Wi-Fi
Let it sit for hours, even days to let it finish doing whatever its trying to do
Etc Etc Etc.
Finally, I called BB support, they wanted $50 to talk to someone. I told them the issue, they said the device is bad and must be replaced. I said its software related!! They said.. no, its a hardware issue. Device is under warranty and they want me to just go get a new one. I don't want a new one, I want a fix! Stop the waste of BB $
Temporary solution
Eventually, I decided I would do a restore, back to the factory settings, and here's when I found something
I run BB Link, connect the device, do a back-up... and LOW AND BEHOLD.. this fixes the high CPU usage and the device runs great, very cool, low cpu and extremely long battery life.
Sadly! .. this problem reoccurs, after a few days, sometimes after a couple of weeks and just out of the blue.
I can force this fault to occur, simply by doing a restart of the device. Sure enough, it will run hot, use all the cpu and I will have to do a back-up to get it to settle down again. I've tried to wait for the so called 'indexing' to finish, but it never stops running with high cpu and doesn't help.
Can any one tell me whats happening and how to make this a permanent fix?
There are hundreds if not thousands of people having very similar issues, and many different methods to fix it. Its my belief that there is an underlying bigger problem that relates to all these differing fixes, but as yet.. I cant find it and none of these fixes work for me. For now... I will keep doing the occasional back-up and hope I get a response that can help.
Thanks to all that read this.

curve8530curve8330 wrote:
The heat may be normal. After a little water damage incident, which I repaired, I disassembled my Z10 the find a small heat sink will thermal compound. This helps dissipate heat efficiently. I found a large number of air bubbles and possibly a large air pocket by the way the paste stuck to both sides. I removed the old paste and replaced it with artic silver paste and the z10 has been much much cooler. It use to run about 105*f and now it is around 85*f.
See this thread I posted for before and after pictures using a thermal imager.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-heating-up-fix/m-p/3031220#M71390
@Curve8530 .....as much a s your discovery is appreciated, I hardly believe that most people will actually dismantle their phone to remove the paste and replace with arctic silver. Besides, what you are doing is not a fix for the actual problem....
In most cases, this heat is associated with apps using the CPU resources beyond the normal limits.
As an easy fix, finding and removing the app(s) in question followed by a reboot, solves the issue. In some cases an OS reload is necessary.... but under no circumstances I would even remotely suggest to any member to dismantle their phone and do what you did...

Nokia 5800XM High Performance Battery

Nokia 5800XM High Performance Battery
I saw this advertisement and also some of my friends in Malaysia using high performance battery on their Nokia 5800XM phone. Whereby the standard power output allowed to the device is 3.7volts @ 1320mAH. However, these users bought higher performance battery (linked example below). My question is:
1. Does this allowed by Nokia to be used by end-users on the device?
2. Any side effects technically on long term use?
3. Does Nokia covers warranty on this issue?
Example seller link: http://www.valuemax.co.uk/product_details.php?id=15835
Note: I prefer some senior members / Nokia staff to reply on this topic.
TQ .. XM
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

Using this battery in and of itself will not have any impact on your warranty.
However, if the phone is damaged through use of this battery (eg. electrolyte leakage or explosion!) then it will not be covered by the warranty.
I actually have one of these batteries and I'm pleased with it. Please do note, however, that the camera window is poorly designed making flash photography impossible. There is no insulation between the flash and the lens meaning that light from the flash floods any photo taken using it. It has no discernable impact on daylight photography, though.
http://www.flickr.com/photos/grshorwich/sets/72157622653165321/
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Z10 - High CPU and Battery Usage with BBM

I recently updated my Z10 (UK and EE Carrier) to 10.2.1.3062 and every day or so I am getting very high CPU and Battery Usage with BBM running in the background.
I have never used BBM and have no active or past conversations or contacts.
This morning, it used around 60% battery in under 3 hours, with 95% of that time sat at 'idle' in my pocket.
Sometimes its after I have connected it to my car stereo (charging and streaming music via USB) on an Alpine CDA-117Ri, but I dont think thats a cause.
Some screen grabs:
[URL=http://s46.photobucket.com/user/hoopsontoast/media/IMG_20150126_095930_zpsj3haccgs.png.html][IMG]htt...
[URL=http://s46.photobucket.com/user/hoopsontoast/media/IMG_20150124_230003_zpshi2dpkfo.png.html][IMG]htt...

You're not alone.
Please read this post here: http://supportforums.blackberry.com/t5/BBM-for-BlackBerry/BBM-is-draining-my-Battery/m-p/3039915#M52...
and contact BBM support as suggested to send logs. BBM Support is working to determine the cause of this.
Please post over in that thread so we can keep all related in one place.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Config Manager Agent - after Hardware Inventory High CPU Usage with WMIPRSVE and very fast empty Battery

Hi there,
since a few days there is on some machines (40-60) a high cpu usage on one core (quad core cpu machines) with the WMIPRSVE.EXE if the HARDWARE INVENTORY CYCLE started.
i try out some tests, read some forum articles and troubleshooting the WMI management but a real problem i doesn´t see.
in some articles i read that hardware inventory runs about minutes up to more hours but some machines runs longer, someone more as 1 day.
here an example of mine PC:
at 8:07 i started Hardware Inventory Cycle, in the InventoryAgent.log i can see that some Collection Namespace are captured.
after a few minutes there stopped and does nothing round about 5.9 hours or better, after 21436.097 Seconds.
For any hints i am grateful. :)
Inventory: *********************** Start of message processing. ***********************
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Message type is InventoryAction InventoryAgent
18.03.2015 08:09:56 11088 (0x2B50)
Inventory: Temp directory = C:\WINDOWS\CCM\Inventory\Temp\
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Clearing old collected files. InventoryAgent
18.03.2015 08:09:56 11088 (0x2B50)
Inventory: Opening store for action {00000000-0000-0000-0000-000000000001} ...
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
CInvState::VerifyInventoryVersionNumber: Mismatch found for '{00000000-0000-0000-0000-000000000001}': 4.2 vs. 0.0
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Version number mismatch; will do a Full report.
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Action=Hardware, ReportType=ReSync, MajorVersion=5, MinorVersion=0
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Initialization completed in 0.141 seconds
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Collection: Namespace = \\localhost\root\Microsoft\appvirt\client; Query = SELECT __CLASS, __PATH, __RELPATH, CachedLaunchSize, CachedPercentage, CachedSize, LaunchSize, Name, PackageGUID, TotalSize, Version, VersionGUID FROM Package; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:09:56
7836 (0x1E9C)
Failed to get IWbemService Ptr for \\localhost\root\vm\VirtualServer Namespace: 8004100E
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Failed to enumerate instances of VirtualMachine: 8004100E
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AddressWidth, BrandID, CPUHash, CPUKey, DataWidth, DeviceID, Family, Is64Bit, IsHyperthreadCapable, IsMobile, IsTrustedExecutionCapable, IsVitualizationCapable, Manufacturer,
MaxClockSpeed, Name, NormSpeed, NumberOfCores, NumberOfLogicalProcessors, PCache, ProcessorId, ProcessorType, Revision, SocketDesignation, Status, SystemName, Version FROM SMS_Processor; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\CCM\powermanagementagent; Query = SELECT __CLASS, __PATH, __RELPATH, Requester, RequesterInfo, RequesterType, RequestType, Time, UnknownRequester FROM CCM_PwrMgmtLastSuspendError; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, Manufacturer, Name, Status FROM Win32_IDEController; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, BinFileVersion, BinProductVersion, Description, ExecutableName, FilePropertiesHash, FilePropertiesHashEx, FileSize, FileVersion, HasPatchAdded, InstalledFilePath, IsSystemFile,
IsVitalFile, Language, Product, ProductCode, ProductVersion, Publisher FROM SMS_InstalledExecutable; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
= 600 secs. InventoryAgent
18.03.2015 14:06:43 7836 (0x1E9C)
Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AdditionalProductCodes, CompanyName, ExplorerFileName, FileDescription, FilePropertiesHash, FileSize, FileVersion, FolderPath, LastUsedTime, LastUserName, msiDisplayName,
msiPublisher, msiVersion, OriginalFileName, ProductCode, ProductLanguage, ProductName, ProductVersion, SoftwarePropertiesHash FROM CCM_RecentlyUsedApps; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, BankLabel, Capacity, Caption, CreationClassName, DataWidth, Description, DeviceLocator, FormFactor, HotSwappable, InstallDate, InterleaveDataDepth, InterleavePosition, Manufacturer,
MemoryType, Model, Name, OtherIdentifyingInfo, PartNumber, PositionInRow, PoweredOn, Removable, Replaceable, SerialNumber, SKU, Speed, Status, Tag, TotalWidth, TypeDetail, Version FROM Win32_PhysicalMemory; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, InstallDate, Manufacturer, Name, PNPDeviceID, ProductName, Status FROM Win32_SoundDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
SystemName FROM Win32_USBDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Collection: 62/74 inventory data items successfully inventoried.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Collection Task completed in 21436.097 seconds
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: 12 Collection Task(s) failed. InventoryAgent
18.03.2015 14:07:12 7836 (0x1E9C)
Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Starting reporting task. InventoryAgent
18.03.2015 14:07:12 7552 (0x1D80)
Reporting: 4381 report entries created. InventoryAgent
18.03.2015 14:07:13 7552 (0x1D80)
Inventory: Reporting Task completed in 1.030 seconds
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Cycle completed in 21453.570 seconds
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Inventory: Action completed. InventoryAgent
18.03.2015 14:07:30 7552 (0x1D80)
Inventory: ************************ End of message processing. ************************
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
SystemName FROM Win32_USBDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Collection: 62/74 inventory data items successfully inventoried.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Collection Task completed in 21436.097 seconds
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: 12 Collection Task(s) failed. InventoryAgent
18.03.2015 14:07:12 7836 (0x1E9C)
Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Starting reporting task. InventoryAgent
18.03.2015 14:07:12 7552 (0x1D80)
Reporting: 4381 report entries created. InventoryAgent
18.03.2015 14:07:13 7552 (0x1D80)
Inventory: Reporting Task completed in 1.030 seconds
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Cycle completed in 21453.570 seconds
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Inventory: Action completed. InventoryAgent
18.03.2015 14:07:30 7552 (0x1D80)
Inventory: ************************ End of message processing. ************************
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)

InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
= 600 secs. InventoryAgent
18.03.2015 14:06:43 7836 (0x1E9C)
Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Looks like something in one or both of those wmi queries. it goes from 8:10:03 to 14:06:43 right around there. 6 hours to do that...
try running those queries from wbemtest manually; and see which one just never finishes.
Standardize. Simplify. Automate.

Android 5.1.1 battery usage high?

Samsung S6 updated over air yesterday to 5.1.1 TBH I haven't seen that much difference in using it. But I used to use my phone all day and still have >50% battery left when put on charge overnight. Today I'm down to 20% with a good few hours left to normal recharge time. I've checked battery usage, and the highest usage is play services @ 25%. Is this normal? I haven't needed to check battery usage prior to issues, so this maybe perfectly normal. I've restarted my phone, turned off wifi GPS & bluetooth lunchtime (all these are normally left on) and still dropping fast. Is it just me, or are others suffering with battery drain since upgrade?

Hi
There's been a few posts around various issues after the over the air update.
Doing a back-up then a factory re-set seems to resolve the issue.
Click Here for Help & Support with backing up and restoring via Kies.
Hope this helps!
Thanks.

Sudden high memory usage, can't find cause

I did a big update yesterday, and today I've started to notice very high memory usage. I wasn't keeping track before so I can't say how much it increased, but I've never had problems before, and the slowness and lack of responsiveness have been noticeable, though I haven't ruled out other possible causes for that. Here's the output of 'free -m':
total used free shared buffers cached
Mem: 7971 7826 144 0 1 149
-/+ buffers/cache: 7674 296
Swap: 9215 458 8757
It wasn't as bad as that right after startup, though usage still seemed suspiciously high. What makes this whole thing a mystery to me is that none of my running processes seem to be using that much memory! Here's the output of 'top -b -n 1':
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 32712 544 384 S 0.0 0.0 0:01.32 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:02.48 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:15.55 rcu_preempt
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
11 root rt 0 0 0 0 S 0.0 0.0 0:00.05 watchdog/0
12 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/1
13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
14 root 20 0 0 0 0 S 0.0 0.0 0:01.02 ksoftirqd/1
16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:0H
17 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/2
18 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
19 root 20 0 0 0 0 S 0.0 0.0 0:01.17 ksoftirqd/2
20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0
21 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0H
22 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/3
23 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
24 root 20 0 0 0 0 S 0.0 0.0 0:01.04 ksoftirqd/3
26 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:0H
27 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
31 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
32 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
33 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 xenbus_frontend
35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
36 root 20 0 0 0 0 S 0.0 0.0 0:06.75 kswapd0
37 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
38 root 39 19 0 0 0 S 0.0 0.0 0:00.24 khugepaged
39 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify_mark
40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
44 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld
47 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq
49 root 20 0 0 0 0 S 0.0 0.0 0:00.21 kworker/1:1
61 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
63 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
68 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
69 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
70 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
71 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5
76 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
81 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/3:2
93 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 firewire
94 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6
95 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7
96 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_8
97 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_9
100 root 0 -20 0 0 0 S 0.0 0.0 0:01.31 kworker/0:1H
104 root 20 0 0 0 0 S 0.0 0.0 0:00.03 jbd2/sda3-8
105 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
119 root 20 0 182720 324 228 S 0.0 0.0 0:02.90 systemd-journal
130 root 20 0 32032 320 316 S 0.0 0.0 0:00.16 systemd-udevd
133 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/1:2
150 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
152 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 nfsiod
160 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:1H
162 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1H
189 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211
191 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 led_workqueue
216 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/53-mei_me
220 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:1H
255 root 20 0 0 0 0 S 0.0 0.0 0:00.59 jbd2/sda2-8
256 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
267 root 20 0 13236 340 260 S 0.0 0.0 0:00.02 crond
268 root 20 0 57644 524 232 S 0.0 0.0 0:00.07 syslog-ng
275 root 20 0 77896 2164 52 S 0.0 0.0 0:00.11 cupsd
276 root 20 0 32856 32 0 S 0.0 0.0 0:00.53 atieventsd
278 root 20 0 26120 452 448 S 0.0 0.0 0:00.00 systemd-logind
280 dbus 20 0 18040 1040 484 S 0.0 0.0 0:00.16 dbus-daemon
293 root 20 0 8156 32 28 S 0.0 0.0 0:00.04 agetty
294 root 20 0 22416 304 304 S 0.0 0.0 0:00.00 kdm
311 root 20 0 32332 52 0 S 0.0 0.0 0:00.10 wpa_supplicant
314 root 20 0 4252 44 28 S 0.0 0.0 0:02.61 acpid
363 root 20 0 233544 396 396 S 0.0 0.0 0:00.12 colord
370 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
371 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
372 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
379 root 20 0 8612 60 16 S 0.0 0.0 0:00.00 dhcpcd
462 redac 20 0 15212 68 0 S 0.0 0.0 0:00.37 gpg-agent
465 redac 20 0 12680 4 0 S 0.0 0.0 0:00.00 ssh-agent
504 root 20 0 229584 440 284 S 0.0 0.0 0:00.03 upowerd
507 polkitd 20 0 506832 916 700 S 0.0 0.0 0:00.09 polkitd
563 root 20 0 355656 1804 1044 S 0.0 0.0 0:01.50 udisksd
628 redac 20 0 2397180 17068 2004 S 0.0 0.2 0:04.86 mysqld
796 rtkit 21 1 168664 372 360 S 0.0 0.0 0:00.34 rtkit-daemon
873 pdnsd 20 0 172532 0 0 S 0.0 0.0 0:00.00 pdnsd
874 tor 20 0 49952 20556 2152 S 0.0 0.3 0:05.89 tor
1884 root 20 0 361452 118644 105076 S 0.0 1.5 1:21.43 X
1895 root 20 0 75048 660 656 S 0.0 0.0 0:00.00 kdm
1903 redac 20 0 13736 412 408 S 0.0 0.0 0:00.01 startkde
1912 redac 20 0 18016 324 320 S 0.0 0.0 0:00.00 dbus-launch
1913 redac 20 0 19220 1604 564 S 0.0 0.0 0:00.50 dbus-daemon
1959 redac 20 0 12680 52 48 S 0.0 0.0 0:00.00 ssh-agent
1976 root 20 0 4080 40 0 S 0.0 0.0 0:00.00 start_kdeinit
1977 redac 20 0 343772 1976 1420 S 0.0 0.0 0:00.07 kdeinit4
1978 redac 20 0 348392 2680 1824 S 0.0 0.0 0:00.04 klauncher
1980 redac 20 0 1262136 5352 3596 S 0.0 0.1 0:00.48 kded4
1991 redac 20 0 430604 4032 2840 S 0.0 0.0 0:00.11 kglobalaccel
1995 redac 20 0 694524 3020 2520 S 0.0 0.0 0:00.10 kactivitymanage
2000 redac 20 0 4216 44 44 S 0.0 0.0 0:00.00 kwrapper4
2001 redac 20 0 516344 3224 2300 S 0.0 0.0 0:00.10 ksmserver
2009 redac 20 0 422056 19640 15244 S 0.0 0.2 0:23.69 compiz
2012 redac 20 0 388168 7692 4544 S 0.0 0.1 0:01.26 emerald
2023 redac 20 0 280300 2500 2160 S 0.0 0.0 0:00.06 kuiserver
2025 redac 20 0 154132 1848 1344 S 0.0 0.0 0:00.24 akonadi_control
2027 redac 20 0 1949412 1984 1592 S 0.0 0.0 0:00.33 akonadiserver
2059 redac 20 0 346680 1408 1020 S 0.0 0.0 0:00.04 kio_http_cache_
2062 redac 20 0 769220 4932 3436 S 0.0 0.1 0:01.00 krunner
2071 redac 20 0 603092 4484 3132 S 0.0 0.1 0:00.16 kmix
2073 redac 20 0 285208 2680 2352 S 0.0 0.0 0:00.04 nepomukcontroll
2074 redac 20 0 359260 3148 2864 S 0.0 0.0 0:00.25 gtk-kde4
2077 redac 20 0 309608 2468 2220 S 0.0 0.0 0:00.05 akonadi_agent_l
2078 redac 20 0 309512 2332 2140 S 0.0 0.0 0:00.04 akonadi_agent_l
2079 redac 20 0 309496 2564 2336 S 0.0 0.0 0:00.05 akonadi_agent_l
2080 redac 20 0 309608 2476 2224 S 0.0 0.0 0:00.05 akonadi_agent_l
2081 redac 20 0 549804 3236 2480 S 0.0 0.0 0:00.13 akonadi_archive
2082 redac 20 0 303140 2480 2276 S 0.0 0.0 0:00.04 akonadi_agent_l
2083 redac 20 0 305600 2516 2300 S 0.0 0.0 0:00.05 akonadi_agent_l
2084 redac 20 0 314988 4144 3156 S 0.0 0.1 0:00.12 akonadi_imap_re
2099 redac 20 0 430912 15668 9912 S 0.0 0.2 0:09.39 yakuake
2100 redac 20 0 309676 2560 2308 S 0.0 0.0 0:00.04 akonadi_agent_l
2101 redac 20 0 339400 2860 2468 S 0.0 0.0 0:00.09 akonadi_maildis
2102 redac 20 0 549820 2828 2504 S 0.0 0.0 0:00.13 akonadi_mailfil
2103 redac 20 0 314052 2924 2508 S 0.0 0.0 0:00.09 akonadi_nepomuk
2115 redac 20 0 303056 2428 2240 S 0.0 0.0 0:00.04 akonadi_agent_l
2132 redac 20 0 2011628 14200 5716 S 0.0 0.2 0:18.21 ktorrent
2158 redac 20 0 15972 836 520 S 0.0 0.0 0:00.00 bash
2161 redac 20 0 1040928 6484 3060 S 0.0 0.1 0:00.53 knotify4
2162 redac 20 0 1962616 484928 23072 S 0.0 5.9 2:06.25 firefox
2176 redac 20 0 13732 344 340 S 0.0 0.0 0:00.00 rssowl
2178 redac 20 0 11344 404 404 S 0.0 0.0 0:00.00 RSSOwl
2193 redac 20 0 374420 2764 2516 S 0.0 0.0 0:00.06 polkit-kde-auth
2195 redac 20 0 3314212 140484 13196 S 0.0 1.7 0:24.29 java
2203 redac 9 -11 308256 2424 912 S 0.0 0.0 0:00.36 pulseaudio
2209 redac 20 0 406420 3544 2720 S 0.0 0.0 0:00.08 korgac
2233 redac 20 0 69156 420 420 S 0.0 0.0 0:00.00 gconf-helper
2235 redac 20 0 45676 836 564 S 0.0 0.0 0:00.01 gconfd-2
2236 redac 20 0 438044 4468 3128 S 0.0 0.1 0:00.13 klipper
2322 redac 20 0 193052 944 740 S 0.0 0.0 0:00.00 gvfsd
2336 redac 20 0 282112 644 644 S 0.0 0.0 0:00.00 gvfsd-fuse
2361 redac 20 0 263576 572 572 S 0.0 0.0 0:00.00 at-spi-bus-laun
2436 redac 20 0 3188512 61188 19352 S 0.0 0.7 0:16.98 plasma-desktop
2441 redac 20 0 9828 784 520 S 0.0 0.0 0:01.06 ksysguardd
2832 redac 20 0 15580 1240 784 S 0.0 0.0 0:02.93 top
2867 redac 20 0 15972 1796 1160 S 0.0 0.0 0:00.03 bash
2937 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/2:1
2938 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1
3336 root 20 0 0 0 0 S 0.0 0.0 0:00.25 kworker/u8:2
3643 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u8:1
3662 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1
3703 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
3704 redac 20 0 15456 1308 992 R 0.0 0.0 0:00.00 top
32506 root 20 0 0 0 0 S 0.0 0.0 0:00.57 kworker/0:2
I wouldn't expect the '%MEM's to add up to exactly the real usage, but this isn't even close! So, what could be using up all of my memory? I have /tmp mounted to ram, but that's only a few megabytes. I really have no idea where to go from here.
The relevant portion of my pacman log is below, since I don't know how to get just a compact list of the updated packages. Most notably, the kernel was upgrades, from 3.9.9-1 to 3.10.3-1.
[2013-08-03 13:00] [PACMAN] Running 'pacman -Su'
[2013-08-03 13:00] [PACMAN] starting full system upgrade
[2013-08-03 13:38] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
[2013-08-03 13:38] [PACMAN] upgraded libmariadbclient (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb-clients (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded akonadi (1.10.0-2 -> 1.10.2-1)
[2013-08-03 13:38] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
[2013-08-03 13:38] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
[2013-08-03 13:38] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
[2013-08-03 13:38] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
[2013-08-03 13:38] [PACMAN] upgraded amarok (2.7.1-2 -> 2.7.1-3)
[2013-08-03 13:38] [PACMAN] upgraded anki (2.0.11-1 -> 2.0.12-1)
[2013-08-03 13:38] [PACMAN] upgraded apr (1.4.6-1 -> 1.4.8-1)
[2013-08-03 13:38] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
[2013-08-03 13:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
[2013-08-03 13:38] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
[2013-08-03 13:38] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] ---------------- I/O BUG ---------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
[2013-08-03 13:38] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More infos:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-utils (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] + removing fglrx module from /usr/lib/modules/3.9.9-1-ARCH
[2013-08-03 13:38] [ALPM-SCRIPTLET] Building fglrx module for 3.9.9-1-ARCH kernel ...
[2013-08-03 13:38] [ALPM-SCRIPTLET] Ok.
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] ATTENTION!
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] To enable 'automatic re-compilation while system shutdown/reboot'
[2013-08-03 13:38] [ALPM-SCRIPTLET] testing feature run these commands as root:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More info here:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-hook (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [PACMAN] upgraded chromaprint (0.7-5 -> 0.7-6)
[2013-08-03 13:38] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:38] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
[2013-08-03 13:38] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
[2013-08-03 13:38] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:38] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
[2013-08-03 13:38] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
[2013-08-03 13:38] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
[2013-08-03 13:38] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:38] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
[2013-08-03 13:38] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded chromium (28.0.1500.71-1 -> 28.0.1500.95-1)
[2013-08-03 13:38] [PACMAN] upgraded glew (1.9.0-2 -> 1.10.0-1)
[2013-08-03 13:38] [PACMAN] upgraded projectm (2.1.0-5 -> 2.1.0-6)
[2013-08-03 13:39] [PACMAN] upgraded clementine (1.1.1-8 -> 1.1.1-9)
[2013-08-03 13:39] [PACMAN] upgraded cln (1.3.2-1 -> 1.3.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-bad (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded clutter-gst (2.0.4-2 -> 2.0.6-1)
[2013-08-03 13:39] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
[2013-08-03 13:39] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
[2013-08-03 13:39] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
[2013-08-03 13:39] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
[2013-08-03 13:39] [PACMAN] upgraded lib32-glew (1.9.0-1 -> 1.10.0-1)
[2013-08-03 13:39] [ALPM] warning: directory permissions differ on /opt/df_linux/
[2013-08-03 13:39] [PACMAN] upgraded dwarffortress (0.34.11-3 -> 0.34.11-4)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded eclipse (4.2.2-1 -> 4.3-1)
[2013-08-03 13:39] [PACMAN] upgraded emacs (24.3-2 -> 24.3-3)
[2013-08-03 13:39] [PACMAN] upgraded exempi (2.2.0-1 -> 2.2.1-1)
[2013-08-03 13:39] [PACMAN] upgraded fontforge (20120731_b-3 -> 20120731_b-6)
[2013-08-03 13:39] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
[2013-08-03 13:39] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
[2013-08-03 13:39] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
[2013-08-03 13:39] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
[2013-08-03 13:39] [PACMAN] upgraded glpk (4.48-1 -> 4.52-1)
[2013-08-03 13:39] [PACMAN] upgraded gnash-common (0.8.10-9 -> 0.8.10-10)
[2013-08-03 13:39] [PACMAN] upgraded ibus (1.5.2-2 -> 1.5.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-settings-daemon (3.8.3-2 -> 3.8.4-1)
[2013-08-03 13:39] [PACMAN] upgraded libqmi (1.4.0-1 -> 1.4.0-2)
[2013-08-03 13:39] [PACMAN] upgraded libmbim (1.2.0-1 -> 1.4.0-1)
[2013-08-03 13:39] [PACMAN] upgraded modemmanager (0.7.991-1 -> 1.0.0-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-control-center (3.8.3-1 -> 3.8.4.1-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-vfs (2.24.4-6 -> 2.24.4-7)
[2013-08-03 13:39] [PACMAN] upgraded goffice (0.10.3-1 -> 0.10.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gnumeric (1.12.3-1 -> 1.12.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-base (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-good (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [ALPM] warning: directory permissions differ on /var/log/hp/
[2013-08-03 13:40] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
[2013-08-03 13:40] [PACMAN] upgraded idnkit (1.0-2 -> 1.0-3)
[2013-08-03 13:40] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
[2013-08-03 13:40] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
[2013-08-03 13:40] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
[2013-08-03 13:40] [PACMAN] upgraded qtwebkit (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:40] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-filesharing (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kdnssd (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kget (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kopete (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kppp (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krdc (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krfb (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kid3 (2.3-1 -> 2.3-2)
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [PACMAN] upgraded lib32-catalyst-utils (13.6-1 -> 13.8-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-giflib (4.2.1-1 -> 5.0.4-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:40] [PACMAN] upgraded libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpng (1.6.2-1 -> 1.6.3-1)
[2013-08-03 13:40] [PACMAN] upgraded mesa (9.1.4-5 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-mesa (9.1.4-1 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nss (3.14.3-2 -> 3.15.1-1)
[2013-08-03 13:40] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
[2013-08-03 13:40] [PACMAN] upgraded libgdiplus (2.10-4 -> 2.10.9-1)
[2013-08-03 13:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
[2013-08-03 13:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-1)
[2013-08-03 13:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-docs (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-52)
[2013-08-03 13:40] [PACMAN] upgraded mediastreamer (2.9.0-1 -> 2.9.0-3)
[2013-08-03 13:41] [PACMAN] upgraded meld (1.7.3-1 -> 1.7.4-1)
[2013-08-03 13:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded mercurial (2.6.3-1 -> 2.7-1)
[2013-08-03 13:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:41] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
[2013-08-03 13:41] [PACMAN] upgraded nfs-utils (1.2.8-8 -> 1.2.8-9)
[2013-08-03 13:41] [PACMAN] upgraded pcsx2 (1.0.0-5 -> 1.0.0-6)
[2013-08-03 13:41] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
[2013-08-03 13:41] [PACMAN] upgraded soundkonverter (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:41] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
[2013-08-03 13:41] [PACMAN] upgraded syslinux (4.06-2 -> 4.07-1)
[2013-08-03 13:41] [PACMAN] upgraded telepathy-glib (0.20.2-1 -> 0.20.4-1)
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-2)
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat installed as /etc/texmf/tex/generic/config/language.dat.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.def installed as /etc/texmf/tex/generic/config/language.def.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg installed as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/chktex/chktexrc installed as /etc/texmf/chktex/chktexrc.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf installed as /etc/texmf/web2c/fmtutil.cnf.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/texmf.cnf installed as /etc/texmf/web2c/texmf.cnf.pacnew
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4WfV4vnjxi...
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-08-03 13:41] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-08-03 13:41] [ALPM-SCRIPTLET] updmap: resetting $HOME value (was /home/redac) to root's actual home (/root).
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /usr/share/texmf/texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2013-08-03 13:41] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
[2013-08-03 13:41] [PACMAN] upgraded texlive-core (2012.29661-1 -> 2013.30962-2)
[2013-08-03 13:41] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
[2013-08-03 13:41] [PACMAN] upgraded twisted (13.0.0-1 -> 13.1.0-1)
[2013-08-03 13:41] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] installed ffmpeg-compat (1:0.10.8-4)
[2013-08-03 13:42] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
[2013-08-03 13:42] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:42] [PACMAN] upgraded wine (1.6rc5-1 -> 1.7.0-1)
[2013-08-03 13:42] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
[2013-08-03 13:42] [PACMAN] upgraded youtube-dl (2013.07.17.1-1 -> 2013.07.25.2-1)

Okay, so it turns out that this was caused by the Catalyst bug described in this post. Reverting to the 13.6 version solved the problem. Lesson learned: if there's a ton of memory being used that isn't owned by a running process, start looking for bug reports involving drivers. Especially drivers known for being, well, pretty bad. Was there any method I could have used that would have told me that Catalyst was using all my ram, or is kernel-space memory usage pretty much a black box?
Last edited by Chaotechnician (2013-08-08 00:10:43)

Nokia 1020 lumia camera issue (and flashlight X)

Hello!
I do not know this absolutely but I noticed after I downloaded a couple of updates, including an update to Flashlight X, on my nokia 1020 that it suddenly started taking pictures on its own back to back with out stopping. The phone also got warm and the battery would deplete.
This was all a couple of days ago. Since, I have deleted the Flashlight x app and this camera problem seems to have gone away.
So far so good. Again its just a hypothesis.
Best,
Jay

hi mate, in this case you will need to contact the developer of the app, as we are a user to user forum only for Nokia products and services.

Kernel_task high CPU usage yosemite

Hi,
I have a problem with my old macbook pro 15" Early 2011
The battery was dead so I bought a new one and replaced it. I also installed a new Samsung SSD.
Then after the startup (OSX Mavericks was installed) I had a high CPU usage on the kernel_task process.
After some research i managed to get rid of the problem with manipulating the IOPlatformPluginFamily.kext files.
After that everything worked fine.
Now I decided to upgrade to Yosemite (clean install from usb) and now i have the same problem again, but i can't find the IOPlatformPluginFamily.kext.
After I power up the macbook everything works fine, but after some minutes the kernel_task has again a very high CPU usage - the mouse is hardly moving.
How can I solve this problem and where do I find the IOPlatformPluginFamily.kext? Is there another solution for this problem?
I already reset the SMC and the NVRAM.
thank you
Hans

Hi,
I have a problem with my old macbook pro 15" Early 2011
The battery was dead so I bought a new one and replaced it. I also installed a new Samsung SSD.
Then after the startup (OSX Mavericks was installed) I had a high CPU usage on the kernel_task process.
After some research i managed to get rid of the problem with manipulating the IOPlatformPluginFamily.kext files.
After that everything worked fine.
Now I decided to upgrade to Yosemite (clean install from usb) and now i have the same problem again, but i can't find the IOPlatformPluginFamily.kext.
After I power up the macbook everything works fine, but after some minutes the kernel_task has again a very high CPU usage - the mouse is hardly moving.
How can I solve this problem and where do I find the IOPlatformPluginFamily.kext? Is there another solution for this problem?
I already reset the SMC and the NVRAM.
thank you
Hans

Photo - Nokia 1020: how the best camera phone in t...

Dear Nokia,
I am a huge photo addict and i cannot tell u how excited i was when i first lay my hands on the famous 41Mpx of the nokia 1020. Still - this camera phone became the worst - especially with the nokia black OS update.
With Nokia black update i choose to finally take my high res pix into the .DNG format.
The previous settings (34Mp JPEG) was not satisfactory as clearly the jpeg compression in the phone was not good enough.
Now that i take 41Mpix .DNG files - here are my issues :
- No way to retrieve the original 41Mpx that to plug a USB cable to my PC (come on - we are getting to 2014!)
- No way to watch my brand new raw pictures as .DNG is unsupported by Win8 (i needed to download an Adobe .DNG codec that still does not display thumbnail correctly in Win Explorer - but at least i can open them)
- No way to share my high res pictures : as neither SkyDrive, nor Flickr or any website do accept .DNG files uploaded
- Even when i convert my .dng file to uncompressed .jpeg or .png... well once uploaded to SkyDrive, the thumbnail created by SkyDrive is recompressing the pictures and showing the ugly pixel squares in the skies i wanted to avoid.
- the Low Res 5 Mpix of my pictures - i can share wirelessly anywhere - but they all look worse than any average phone picture (iPhone 4S would do an 8 Mpix of any pictures)
So i have got a hard time to understand your strategy here : why anyone would shift from high res .jpeg (12Mb per pictures) to high res .dng (41 Mb per picture!) on a 32Gb storage phone... if none of this pictures can be watched on a PC or decently shared on the internet ???
At least you could have tried better by adopting a more compatible format like .RAW ?
Unhappy customer (who would have loved to praise the 1020 and ditch his iPhone forever...)
Pierre-Eric

DNG images are supposed to be processed and edited before sharing. The format is owned by Adobe which would be why you need their codec/applications.
I would suggest you teach yourself the basics of photo editing and composition as from your remarks it would seem you expect expert results to happen as if by magic which will not happen. You images will only be as good as your imagination and creativity.
Stay on processed and auto mode if you feel you are not able to properly deal with DNG files as this is not as easy as many seem to think. DNG mode _depends_ on you doing the processing of the images and knowing what you are doing and how to do it.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Battery Usage after upgrade

I have upgrade my Z10 to the latest Software and I am highly disapointed by it, my Bluetooth connection to my Mercedes bluetooth carkit is not working anymore, and within 4 hours my baterry is totally empty, due to the Hub and the system, haven't called or received a call during that time.
Now i have to load my phone 3 times a day, that is not the way to release new upgrades.

I am now running the New OS as from Wednesday evening besides the well known issues with the battery and the Bluetooth, what I see I am happy with, BUT I really can't understand that BlackBerry who is not as popular anymore and is in really bad weather can effort such a terrible OS release, I agree with Paul that this looks like a Early Beta release then as a finished tested release. I AM NO fan from Apple and Android, but if BlackBerry keeps on releasing such OS upgrades they will soon be without any clients and Chapter 11 will looming soon. As from this morning I switched BlackBerry Link off and that helps a bit. I will be patient for the Battery usage BUT the Bluetooth not working is really not acceptable.

Nokia 1020 high battery usage

Similar Messages

Maybe you are looking for