Nokia 112 can't connect to audio device

Hi all,
I recently bought a Nokia 112 (RM-837) and wanted to play some music with it.
When I try to play music to my bluetooth audio device (Stereoboomm 500), it displays this error:
"Service not supported by other device".
I am able to successfully pair the two devices, but when I try to connect, it will fail.
Audio device is bluetooth v3.0, Nokia 112 bluetooth v2.1, but this shouldn't be a problem because bluetooth v3.0 is backwards compatible. Audio device is not broken as it works with other phones.
My Nokia has firmware version 3.32.
I tried to update my Nokia with the latest updates, but also this fails (even with factory settings!).
But this shouldn't be the problem either because the update hasn't any changes relating to connectivity.
What could be the problem?
Thanks in advance!
Solved!
Go to Solution.

Okay, I figured it out..
Apparently the Nokia 112 doesn't support the A2DP bluetooth profile that's needed to stream audio to bluetooth speakers.
http://developer.nokia.com/Devices/Device_specifications/112/

Similar Messages

No "connect to audio device" option for E71

I've been trying to connect my nokia BH-102 headset to my E71, but when I go to the Paired Devices tab and press the option button, the "connect to audio device" option is not there. The only three options that appear are "new paired device", "help", and "exit." I've searched for soltions for this online, but thus have not come across any mention of this problem. Am I missing a firmware update of some kind or is this an entirely unique problem?

Solved my question. Somehow 20 minutes of searching the forums didn't turn up the solution but when I posted my question the box on the right had 3 posts with a similar question and solution. Sorry this has become a repeat post.
I would delete it but can't.
Here is a link to the solution that worked for me. I used ONYX.
https://discussions.apple.com/message/9760772#9760772

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

"CONnECTION TO AUDIO DEVICE FAILED"

Does anyone know how to stop the error message from popping up, "CONNECTION TO AUDIO DEVICE FAILED" ?

Hey GerryGoertzen,
Welcome to the BlackBerry® Support Community Forums.
Thank you for your inquiry, this would be caused by a paired Bluetooth device. Go into Manage Connections > Networks and Connections> Bluetooth > Here you can see your Paired Devices, delete any you are not using.
Cheers.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

TS1363 I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid respo

I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.

Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy

Can I connect a wired device to access network?

I have an Airport Express set up as "Join a Wireless network" Can I connect a wired device to the ethernet port of my AE so that it can access the network?

The Ethernet port is normally enabled in the "Join" mode, if you have one of the newer 802.11n models of the AirPort Express.
If you have an older "b/g" version of the Express, the Ethernet port is not enabled in the "join" mode. Check the model number on the side of the Express. If you see A1084 or A1088, this is an older version of the Express.
Test your current Express to see if the port is already enabled by temporarily turning off the wireless on a laptop and connecting the laptop to the Express using an Ethernet cable. See if you can get an Internet connection. If you can, you know the Ethernet port is working.

Sony Ericsson W810i and iSync 2.4: "can not connect to this device"

I am using Mac OS 10.4.11 and iSync 2.4, which I believe are the most up to date versions. My Sony Ericsson W810i is shown as being compatible with iSync as shown on the iSync support page, but while I try to add the phone to it I get the message:
"W810i
iSync can not connect to this device".
Does anybody have any ideas how to sort this problem? I've tried restarting both my computer and phone before trying again.

I finally figured out how to fix this problem. The mobile phone had to be initially added by the computer under Bluetooth to pair them before adding the device to iSync. Adding the computer as a device to the phone to pair them, as I had been doing, didn't allow it to work with iSync.

I can't install any audio device on MacBook Pro 2012

I got a new MacBook Pro 2012 but I can't install any audio device, specially Native Instruments (Traktor)
is there an issue with Mount Lion?
Thank you

Troubleshoot with install logs
Mylenium

Can I connect two firewire devices?

Ideally, I need two firewire devices running at the same time: One camera to capture footage and one firewire external hard disk for the media files (about 160 GB).
a) I've been told that I need a firewire external disc, because a USB hard disk would slow down the editing in Final Cut. Is this true?
b) If so, can I connect two firewire devices to my MBP (74.53 GB internal hard disk), which has only one 400 Firewire port?

1. Yes, FireWire is faster than USB. However, it would be better to edit on your main hard drive. Use the external drive just for storage and backup.
2. You can chain up to 255 FireWire devices provided the total power requirements did not exceed the port's capabilities. A single FireWire drive and a camera shouldn't be a problem. However, you should know that some FireWire cameras may not play well with other FireWire devices. If you find apparent problems when both are connected to the port, then you may need to use each separately. In this case you may need to put the hard drive on a USB port while the camera is connected to the FireWire port unless the camera also supports transfers on USB 2.0.

Nokia 5800xm can't connect to internet or ovi stor...

Nokia 5800xm can't connect to internet or ovi store.
Just got my phone back after a Firmware reset. Now it can't connect to internet or ovi store. It keeps coming up with Invalid Server Name. Can anyone help
Solved!
Go to Solution.

Sorry posted in wrong thread to say thanks as I've got it sorted. Was just my OpenDNS settings. never found a problem until now.
Here's where I post by mistake
/t5/Nseries-and-Symbian-Smartphones/Invalid-Server-Name-Bug-Nokia-5800/m-p/764081/highlight/true
edited spelling mistake

HT4356 I from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356

How can i connect a usb device (keyboard) into ipad 4

How can i connect a usb device (keyboard) into ipad 4

The only keyboards that will work are bluetooth ones and keyboards made specifically for iPad.

Can't connect to bluetooth device and wifi really por

Hi,
I bought recently a Pavilion 15-p036tx and I can't connect to my bluetooth device as logitech audio adapter, toshiba bluetooth mose and phone HTC.
I noticed as well that the wifi connection is realy por only 1strip.
I have a old HP Pvilion I bought in 2007 which is connecting to my bluetooth devices and the wifi is at full bandwith perfectly.
It's realy seams to be a driver issue. On the HP support donwload page the is too many drives. Which one should I use?
Nicolas

@NicolasBilly ,
Hello and thank you for posting on the HP support forums. Here is a link that you may find useful.
HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)
Here is another one may help.
HP PCs - Using Bluetooth Devices (Windows 8)
Let me know if you need any more help.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

'Connection to Audio Device failed' - constant Bluetooth message

I have a Blackberry Torch and keep getting the above message, despite there only being 3 paired devices, each of which works fine when on. The message repeats every 3-5 seconds whenever I'm in the house, but no other device can be found on search.
Any ideas?

Hey Occam1,
To better assist you with this issue, what types of Bluetooth® audio devices are you connected to? This message appears when you are out of range of the Bluetooth® device, you may want to disable your Bluetooth® when you are in your house this would stop the prompts from Bluetooth®.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Nokia E61i can't connect to internet / Country not listed

Hi all,
My new airport express works fine with my powerbooks but my Nokia E61i does not always get internet access or see the network. I've tried changing various settings such as the channel, closed network or not, the security settings, but I can't seem to find the magic bullet.
I noticed in the wireless clients list of the airport utility that the signal level of the powerbooks is usually around -80 while the e61i is -1.
So my hunch is that it has something to do with the power level or frequency of the radio transmitter.
The Nokia was bought in the USA and the airport in Thailand. I'm wondering if changing the country setting in the wireless options to the USA would have any effect, but I can't seem to find out how to add new countries to the list. Under the wireless options it lists these countries only:
Argentina
Bangladesh
Chile
China
Korea
Nepal
Pakistan
Taiwan
I can't find any mention of what changing the country would do exactly. I assume it has to do with adhering to the various regulations of each country regarding radio transmission, which might also affect compatibility issues.
Thanks for any advice you may have.

Thanks Duane, but unfortunately the e61i still has trouble connecting.
I suspect that there are other differences besides just the channels being used between countries. Changing from one country to the next does nothing to change the list of channels available. It is always 1-11 for me.
So changing the country must change something else, otherwise why include the feature at all? My guess is there are also amperage differences and various frequency ranges within each channel to make sure the airport doesn't interfere with other transmitters in each particular region.
It would be nice to figure out how to get all the countries on my Airport Express, but have read elsewhere that people have simply exchanged their airports with Apple when moving to a new region.
Changing country non-withstanding, I am tempted to believe the problem is with the Nokia. I have noticed that the e61i likes to be the first one on the network when it does connect. I also recall it not always playing nicely with my 2wire router back in the states, causing interference for my macs, etc. Nokia calls the wifi connection wlan, which leads me to believe the compatibility issue stems from Nokia's noncompliance with the WIFI standard. Thinking that maybe Nokia got on the wifi bandwagon in a later release, I updated the device to the latest firmware (Nokia gave me the thai or lao firmware) but nothing changed.
Unfortunately neither Thailand nor Laos are listed on the airport express though it was bought from an authorized Apple reseller in Thailand. So I am back to square one.
Hmmm...

Nokia 112 can't connect to audio device

Similar Messages

Maybe you are looking for