Nokia 1661 - How to connect it to a computer?

I'm feeling quite stupid.  How does one connect the Nokia 1661 to a computer?  What type of data cable is required?  There is a port between the power jack and headphone jack, but it is smaller than a mini USB connector.  The user manual does not specify what that port is.
Thanks for the help.

Absolutely. It is completely closed to the outside world.
If there was a WAP browser you could put the images online somewhere and point it to them, but even that option isn't there. Nor does the 1661 support user-created ringtones other than those created with the built-in ringtone editor.
This is a BUDGET phone, folks. If it got any cheaper SIM-free you'd be finding the things in packets of cereal.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • How to connect to website through computer if i do not use internet through phon's sim

    how to connect to website through computer if i do not use internet through phon's sim

    Connect through wifi.
    Turn off Cellular data through settings __ General __ Network __ Cellular Data on/off

  • Nokia 1661 How should battery strength indicator ...

    I tried contacting Nokia via 'Contact' about this via their web site, but the form is faulty, so it is impossible to supply a correct message and hence send a message at all.
    I am uncertain regarding how the battery strength indicator should look when charged. This is because, unlike my old phone, a motorola, instead of solid black bars, the bars are of a varying intensity from dark blue to white (from right to left).  There are 5 bars. When I charged it the first time the leftmost bar stayed white. This is only my second time of charging. What should it look like when charged?  What is the likely charging time from when fully discharged? I have asked Carphone warehouse regarding my first charge and they said it was charged when the leftmost one was white and the others a varying shade of blue from light to dark (left to right). I've now charged it the second time for 8 hours and got the one white and varying shades of blue again. I note it says on the web site that a new NiMH battery full performance is only achieved after two or three complete charge and discharge cycles. Does mean eventually I should get all bars solid blue?
    It also says on the web site that ‘When you charge the battery for the first time the battery strength indicator does not scroll the entire time, this is normal. What do they mean ‘scroll the entire time?’ Do they really mean scroll completely to the left so all bars become dark blue? 

    I received a reply which unfortunately did not help at all. Here is a copy of the email exchange. I have asked for a proper response.
    To Nokia
    Thank you for your reply. Unfortunately it does not answer the question posed by me and the other customer. I already have a copy of the instruction book.
    Please kindly read the question which is about the battery indicator, have a look at the phone, and let me know how the battery indicator works. If you do not know, please find someone at Nokia who does know. Many thanks.
    From: @nokia.com
    Thank you for contacting Nokia Care.
    Please accept my sincerest apologies for the delay in responding to your email. We have been facing technical difficulties with our system and have just managed to retrieve your email.
    Please use this web link to assist you:
    http://europe.nokia.com/get-support-and-software/product-support/1661-support/guides-1661-support
    If you have any enquiries and comments, please feel free to email to us anytime, as we are very delighted in assisting you and your feedback is highly valuable to us!
    Keep your phone software up-to-date by using the Nokia Software Updater. For more details visit Nokia Support and Software at http://www.nokia.co.uk/support or http://www.nokia.ie/support. You can also go online to find user guides, troubleshooting support and other services to help you use your Nokia product.
    This response has been given based on the information you have provided us. The response is provided for general information purposes only. It is intended, but not promised or guaranteed to be accurate or complete, and it does not constitute any binding commitment.
    To ensure proper handling, please continue to use the current subject line.
    Please don't hesitate to contact us again if you have any further questions.
    Yours sincerely,
    Adam
    Nokia Service Professional
    UK & Ireland Team
    Nokia Care
    [THREAD ID:1-48VTOIN]
    -----Original Message-----
    [Country: United Kingdom] [Language: English]
    [Permission to Email: ]
    [Permission to SMS: ]
    [Permission to Letter: ]
    [Permission to Phone: ]
    [Street address: ]
    [ZIP: ] [City: ]
    [Nokia Music username: [#music_username#]]
    [Phone model: Select]
    [Order number: ]
    [IMEI: ]
    [Contact topic: Nokia Phones or accessories]
    [Message: I have today received a new Nokia 1661 phone from Orange.The instruction booklet is inadequate over several issues. I have cut and pasted a query from your Nokia support discussion page. I have exactly the same query. Can you help, please?     
    "I am uncertain regarding how the battery strength indicator should look when charged. This is because, unlike my old phone, a motorola, instead of solid black bars, the bars are of a varying intensity from dark blue to white (from right to left).  There are 5 bars. When I charged it the first time the leftmost bar stayed white. This is only my second time of charging. What should it look like when charged?  What is the likely charging time from when fully discharged? I have asked Carphone warehouse regarding my first charge and they said it was charged when the leftmost one was white and the others a varying shade of blue from light to dark (left to right). I've now charged it the second time for 8 hours and got the one white and varying shades of blue again. I note it says on the web site that a new NiMH battery full performance is only achieved after two or three complete charge and discharge cycles. Does mean eventually I should get all bars solid blue?
    It also says on the web site that ‘When you charge the battery for the first time the battery strength indicator does not scroll the entire time, this is normal. What do they mean ‘scroll the entire time?’ Do they really mean scroll completely to the left so all bars become dark blue? "]
    [Operator: Orange]
    [Operating system: Select]

  • How to connect to an other computer through the internet

    Please who can help me with Desktop Remote control and connecting through the internet. I know a lot is written about it, but it is still confusing.
    So try to explain my situation:
    I have an MacBook pro with Desktop Remote Control 3
    The other computer:
    Apple PowerBook which is connected through and Thomson Speedtouch (wireless 716)
    External IP address xx.xx.xx.xx
    Internal IP address 192.168.1.66
    No firewalls
    My questions:
    How do I check if my Thomson Speedtouch the ports 5900 and 32?? are open?
    How can I open the ports on the router? Do I have to open the port on the router?
    Then on the MacBook Pro, I start up ARD3
    How do I scan for the computer on Internet? Do I use the external IP address?
    How can I then connect to the Apple PowerBook? I cannot fill in the second internal IP address or do I?
    I hope someone can help me.
    If more info is needed, please ask me.
    Thank you....
    Hans

    Neil thank you for your answer.
    I opened Network Utility. Went to the last Tab "Port Scan"
    I typed in: external IP address (i got this through the Widget SysStat which shows external IP)
    Than I gave up scan between the ports 5890 - 5910 to check if those ports are open or not. I had to way for a moment, and then the result was: "Port Scan has completed....."
    Ok, what do I know know? The ports are open or not?
    So please can someone help me with the following:
    1) What should the result show me from Network utility?
    2) Opening the port, this has to be done on the Router or is it something the Internet Service Provider needs to do?
    3) I still have the question: how can I open the port, so with what application.
    4) What are the exact ports which needs to be open?
    5) About bridging in the router, does that have a special name. I didn't see in the router configuration program an option like that? When searching --> this is configured: A. Router-modem (NAT/PAT) - is there something special with NAT/PAT?
    Hope someone can help me with a few of my questions.
    Thanks

  • HT201269 How to connect Iphone 4 to computer

    How to connect Iphone 4 to computer

    Plug one end of the cable into your computer and the other into your iphone

  • How to connect printer to virtual computer

    How to connect a hp830 printer to a VC running WXP? The same printer works fine on a physical PC, but when I follow directions in the install wizard to "add new printer" within the VC, it comes back "driver not installed" and fails.

    The only way to print from a remote source is to save the files locally and print them from there. There are some commercial class printers that will support remote printing, but I don't know the exact models. An alternative way of doing this would be to get a printer that supports ePrint. With ePrint you can print from any source that can send an email, from anywhere in the world. All you have to do is make sure the printer is on and has an active internet connection. Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to connect my E61 with computer using WLAN

    please tell me the full setting of WLAN how i can connect my computer with WLAN

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • How to connect iphone to new computer without having the old one?  The hard drive on my macbook broke, so I had to install a system from scratch. I now cannot reconnect my iPhone. How can I set the new computer without loosing my data on the iPhone?

    Recently the hard drive on my mac book was damaged beyond repair and I had to reinstall the OS.
    MY iPhone still has all its original dta.
    How can I connect my iPhone to my computer (virtually new) without loosing the data I have on my iPhone?
    Obviously I cannot recover any of the old itunes files.
    Thanks,

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
    - deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • How to connect remotely to a computer running XP professional

    How can I connect remotely to my work computer running XP Professional from my mac book; I'm running tiger on the mac
    Thanks in advance

    Please search the forums before posting, as the topic of sharing files between Mac and Windows computers has been covered dozens of times. It can save you time in the future. Instructions are also already available on your Mac via it's built in Help files accessible from the Help menu. You can also see this article: http://www.ifelix.co.uk/tech/3020.html

  • Time Capsule: How to connect wirelessly to my computer without internet

    I want timecapsule to be set up for me to use wireless printing and hard drive use without having to broadcast an internet signal (dorm rules). How do I do it?
    Thanks

    Hello MBP Rocket. Welcome to the Apple Discussions!
    I want timecapsule to be set up for me to use wireless printing and hard drive use without having to broadcast an internet signal (dorm rules). How do I do it?
    I assume that you still want to have the Time Capsule (TC) provide a local wireless network, just not Internet access ... correct?
    If so, just don't connect the TC's WAN port to the school's network.

  • How to connect my Nokia c2-00 bluetooth Internet in iPad 2

    How to connect my Nokia c2-00 bluetooth Internet in iPad 2

    Just want do you want to do? You can only use BT on an iOS device to share an internet connection on an iPhone and iPad 3 (I think)
    iOS: Understanding Personal Hotspot

  • How to connect my nokia 6120c to my mac laptop?

    how to connect my nokia 6120c to my mac laptop? i want to use my phone as my modem

    Hi,
    Listed below is the step by step intructions to configure the Nokia device as a modem to a mac. If you receive any cases/questions related to this, please provide the steps mentioned below.
    Steps:
    Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
    To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
    -In the following example, the APN name "Airtel" is used. This name will vary depending on your operator.
    -On your device locate and open the Settings application. This is normally in the Tools folder.
    -In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
    -Exit Settings. Your device is now ready to be used as a modem for your Mac!
    -Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here:
    http://europe.nokia.com/support/download-software/​device-as-a-modem
    Note: Preferred mode is USB as it much faster than Bluetooth.
    Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
    Click on Advanced Tab > Modem tab
    - Vendor : Nokia
    -Model:GPRS (GSM/3G)
    -Telephone Number: *99***1# (contact your operator to get this settings)
    -APN: airtelgprs.com (contact your operator to get this settings)
    CID: 1
    Once connected it will be highlighted in green.
    Hopefully this helps.
    Cheers
    Sandy
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • How to connect my Nokia 5230 to internet using Blu...

    I would like to be able to connect my mobile (Nokia 5230) to internet without using the GPRS connection.
    The only option I can see, is to connect my mobile to my PC (which has an internet connection) via bluetooth or USB and share the pc internet connection with my mobile.
    How can I do that?
    I would like to use OVI store but the only option is "Send to Mobile" It seems that it is not possible to download a file on the PC and then send it to the mobile . If I coudl share my PC internet connection with my mobile I will be in a position where I could use OVI store
    I found this post at,
    http://discussion.forum.nokia.com/forum/showthread.php?206301-How-to-connect-my-Nokia-5230-to-intern...
    While trying to find an answer to this.
    Sajit

    What you're asking is not possible. There was a piece of software called GNUBox that might have done the trick but it seems to be more or less abandoned.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How to connect my new Nokia 1110i with my windows ...

    i have recently purchased nokia 1110i. to download sceeensavers, and ringtones i was told that i could connect my phone with usb cable CA 42. i bought that cable but dont know how to connect the phone and the pc.
    please help.
    thanks in advance

    Hi shalooaksingh
    Unfortunately CA-42 will not be suitable for this purpose as a different cable and software is needed from third party supplier.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to connect nokia 6233 to pc

    Hi....,
               this is venkat, I have nokia 6233.i want connect mobile to pc,how to connect mobile to pc, what cable it souitble and what nokia pc suit i use. 

    You should be able to use the CA-53 cable.
     http://europe.nokia.com/find-products/accessories/all-accessories/memory-cards-and-cables/cables/nok...

Maybe you are looking for

  • Bought TV Show on Apple TV (2nd) when can i download it to my Mac

    I am waiting on it to be available to download to my Mac's iTunes library. It has been less than 24 hours. I have both 1st and 2nd Generation Apple TVs. They obviously work differently. I have the 1st Gen setup to stream from my iTunes library and it

  • Return value from database function taking a lot more time than the query

    Hi guys, I have a Query that does a call to a database function. The function takes in a few parameters and returns a Date. Now, the query within the function takes barely .05 seconds. However, doing a select get_join_dates from dual is taking almost

  • Hold-on-to-button event

    heys all, is there a way to fire an event repeatedly when a button is pressed (and not released)

  • Redundant iTunes Store downloads

    Purchased TV episodes are being downloaded over and over again whenever I launch iTunes, preventing me from listening to music or watching videos, not to mention filling up my hard drive. I recently purchased Stargate SG-1 Season 1 and not only did t

  • Bluetooth/system pref crash when turning off bluetooth

    Hi all, I have a Apple Wireless Keyboard and a Kensington Bluetooth Mouse that I use with my Macbook. They work great. However, sometimes when I click "Turn Bluetooth Off" in the Menu Bar, It disconnects the items but stays with the Black symbol like