Nokia 2520 with keyboard in consumption mode

I am a new owner of an AT&T Lumia 2520 with the power keyboard. I have noticed that when I am "consumption mode" and using Metro apps the on screen keyboard does not pop up. The only way to do this is to disconnect the power keyboard entirely and the things work as expected. I can also bring up the keyboard from the charms bar, but this is not optimal. Will there be an update coming to resolve this issue?

Hi,
Sorry If the flight mode is active, it informs " Unable to use when flight profile is active" when try to choose WLAN.
All active connections ended by activating the flight mode.
Br
Mahayv

Similar Messages

Garageband Loses Connection With Keyboard After Sleep Mode

Whenever I open Garageband after my PowerBook G4 15" has been in sleep mode, my connection with my digital keyboard is lost (unable to record). I have to restart the computer in order to get the connection back. Any suggestions on what might be happening here and how to resolve this problem?
I noticed several other posts under "Internet Connections" where people are losing their internet connection after coming out of sleep mode (I am also experiencing this problem as well). Could these two problems be related? I never had either of these problems until recently. Could it have anything to do with recent Mac OSX software updates or iLife '08 updates?
Thanks. Rick.

have you tried simply unplugging and re-plugging-in the keyboard rather than a reboot?

Lumia 2520 Power Keyboard Battery Level

Apologies to those of you who are still waiting/looking for one of these. Got my free one this week. For those that do have one, I guess you have noticed that the Battery icon in the system tray on the desktop lets you see both the tablet and the keyboard power status, Charged, percentage, not charging, etc.
My tablet gets to 100% just fine. The keyboard has never seen above 87%, and at that point actually says 'not charging'. I can drain it some, and plug it back in and it will show the keyboard charging, but it hasn't got above 85-87% and then says it has quit. What do you guys see? Normal? Problem?

My Lumia 2520 with Nokia Power Keyboard shows Battery #1: Fully charged (100%) and Battery #2: 0% available (plugged in, charging). However, even after more than 8 hours plugged in and showing "charging", Battery #2 never shows more than 0%.
The tablet was a used gift,but the keyboard is new, ordered online from Verizon. It has done this from the first time using the tablet with the new keyboard. As far as I know, the tablet never had a keyboard attached until now. All keyboard functions appear to work properly and all tablet functions appear to work properly. I used the tablet with the keyboard for several hours unplugged and the Battery #1 disharged to about 80%. When I plugged it in, Battery #1 charged up to 100% and then it showed Battery #2 plugged in and charging, but never changed from 0% available on Battery #2.
I have tried the Power button and +Volume button technique with no change. It does go throught the stages of showing 0%, not charging on both batteries and then after resetting it goes back to showing the same issue of never showing an increase in Battery #2charge % beyond 0%.
Nokia telephone tech support had me go through that same exercise with no fix. I also refreshed Windows to see if a driver was corrupt with no joy.
None of the nearby Verizon, AT&T or Microsoft stores have the Nokia Porwe Keyboard in stock so I ordered another keyboard from Verizon and if it works then will get a refund on this one that isn't working.
If anyone has any other ideas on how to get the keyboard battery to show that it is charged beyond 0% then please let me know so I won't be returning a good keyboard thinking it is defective.

Yoga 2 Pro: auto disabling keyboard in laptop mode bug

Hello.
I have a problem with my Yoga: very often (even if notebook placed on table) in laptop mode its disabling keyboard and touchpad on several seconds and then enabling it again. This enable/disble (flap) occurs time to time, most often after computer power on.
In this case work with mail or surfing web in laptop is not possible.
Someone have a hint how to repair it or how to enable keyboard manually permanently? Laptop is still on warranty, not broken, didn’t fall, win 8.1.
If need i can record some video on mobile phone with keyboard on/off.

Hi. Here it is. I tried to record the off/on process of this problem. On the seond part i typing in notepad and you can see interuption of letters.
https://yadi.sk/i/3GBZepRabSEpf
Problem is still not solved

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

Consumption Mode not maintained in MRP3

Hi All,
How will the system react if the consumption mode is not maintained in MRP3? Is there a order priority on how/where the system will look for consumption mode?
Thanks for your time.

Dear,
The parameters maintained in the material master (material requirements planning view 3) have the highest priority. If you do not specify a consumption mode, the system uses the consumption parameters from the MRP group that is assigned to the material. If a consumption mode is not specified there, the consumption mode is set to '1' by default (backward consumption only) with a (backward) consumption period of 999 days. This means that the consumption cannot be deactivated because the consumption parameters have not been maintained. The consumption periods are calculated in workdays.
Please refer the OSS Note 772856 - FAQ: Consumption of planned independent requirements
Regards,
R.Brahmankar

Connecting Nokia N8 with Sennheiser VMX100

Hello!
I am trying to connect my Nokia N8 with my Sennheiser VMX100 Bluetooth headset - without any luck. Pairing works fine, although I am not asked for the 0000-PIN. Headset and N8 are paired for approx. 5 seconds, then they are disconnected. They see each other and connect, just to be disconnected after 5 seconds. It is an endless on-off-on-off-... relationship.
I have reset my headset more than once, deleted all pairings, rebooted the N8... Nothing. The problem still remains. What can I do?
I need the Bluetooth headset in my car - so this is no question about a gimmick...
Thanks a lot for your support!
Oh yes, I tried another Bluetooth headset, a much simpler and less expensive noname set - same problem...
Best regards
CC5
(software version 011.012, product code 059D4X3, modell N8-00, type RM-596)

Hello Everbody,
hope you had a great Christmas time...
A little update to my Bluetooth problem(s): more or less, the problem is solved. More, because I can use my Sennheiser headset for phone calls. Less, because I do not know how I did it...
I tried to pair my Sennheiser headset for a couple of days, when ever I was in the mood for Bluetooth - no success. Then I had the occaison to work with some Apple computers with Bluetooth keyboards and Bluetooth mice (mouses...?). So I tried to pair my headset with one of these Apples. Of course, it worked... After that I told a colleague about my N8 problem and we tried to pair my N8 and the headset. After several screens and menues, my N8 asked for the 0000-code! First time ever... Seconds later, I had a stable connection. And I still have.
Don't ask me how we did it - maybe it is just: don't give up... Anyway, it is not a very deterministic communication channel. But after all, I won...
So, now I have to learn voice commands etc. - at least for the rest of the year...
Thanks for listening to my problem(s)...
Seasonal greetings
CC5

Nokia N70 connected in non compatible mode

First here are some facts: Im Using Pc Suite v6.83 on Windows XPsp2. Im using USB cable to connect to my N70.
Now here's the problem: The first time I used PC Suite after Installation, it worked fine. When I used it again the second time, it acted strangely. It didn't detect my phone correctly. It detected the N70 alright, but a baloon popped up from the PC suite Icon on the system tray saying "nokia n70 connected in non compatible mode". Then when I went to the Get Connected wizard, a warning popped up which says "Your phone is in file transfer mode and connot be used with PC suite. quit file transfer mode from the phone if you want to use PC suite". I wonder how could this be since I know that the N70 has no file transfer mode.
Then after finally having my phone detected correctly after diconnecting then connecting the USb cable, my system detected the phone as a digital camera imaging device and as a mass storage device, showing up in windows explorer aside from showing up in the Nokia Phone browser. I Don't think this is a normal bahaviour.
Then the third time I tried to use PC suite, it detected the phone as bing in in non compatible mode again. Yhis time disconnecting and reconnecting the USb cable didn't help.
I found some strange things in the windows device manager too. I found out that under portable device, the N70 was there but disabled and labled as not properly working.
Have you guys encounterd this prblem before? If you did maybe you can help me resolve it. Thanks in advance!

08-Jul-2007 05:32 PM
pmguanco wrote:
First here are some facts: Im Using Pc Suite v6.83 on Windows XPsp2. Im using USB cable to connect to my N70.
Now here's the problem: The first time I used PC Suite after Installation, it worked fine. When I used it again the second time, it acted strangely. It didn't detect my phone correctly. It detected the N70 alright, but a baloon popped up from the PC suite Icon on the system tray saying "nokia n70 connected in non compatible mode". Then when I went to the Get Connected wizard, a warning popped up which says "Your phone is in file transfer mode and connot be used with PC suite. quit file transfer mode from the phone if you want to use PC suite". I wonder how could this be since I know that the N70 has no file transfer mode.
Then after finally having my phone detected correctly after diconnecting then connecting the USb cable, my system detected the phone as a digital camera imaging device and as a mass storage device, showing up in windows explorer aside from showing up in the Nokia Phone browser. I Don't think this is a normal bahaviour.
Then the third time I tried to use PC suite, it detected the phone as bing in in non compatible mode again. Yhis time disconnecting and reconnecting the USb cable didn't help.
I found some strange things in the windows device manager too. I found out that under portable device, the N70 was there but disabled and labled as not properly working.
Have you guys encounterd this prblem before? If you did maybe you can help me resolve it. Thanks in advance!
Message Edited by geronimo on 10-Jan-2008 07:59 AM

Consumption Mode in MRP using reservations

Hi Gurus,
I am try to use the consumption mode found in the MRP setting if SAP.
My scenario is as follows:
1) Did a forecast of a material for 3 months
2) Created a Reservation between does 3 months
Problem:
1) No compensation was made to any of the forecasted quantities (i.e if forcasted quatities was 100- and the reservation was 20-, the forecasted model remained 100- and a reservation of 20- came up when MRP was run)
Expected Results:
1) Forecasted quantity 80- and reservation 20-, i.e. total 100- not 120-
Any ideas,
Thanks,
John.

Dear Uday,
Your question is related to delivery date proposed in the Sales Order processing. This has nothing to do with the consumption mode in the material master. Instead the delivery dates are proposed as per total replen lead time and inhouse prod time from MRP views.
Regards,
Ashish

Installation issue, Photoshop, Lightroom and InDesign into a Nokia 2520 Tablet

I have a subscription package consisting of Adobe Photoshop, InDesign and Lightroom (CC). How do I install them into my Nokia Lumia 2520 Tablet. Are there any known issues?

Doesn't the Nokia 2520 run the cut-down tablet version of Windows (Windows RT)? If so, I don't believe that any of the CC applications you mention will work on it... You need a tablet with the full version of Windows 8.
M

Case with Keyboard Will Not Work on my HP 7"1800 Android Tablet

I baught a HP 7" 1800 android tablet and I resently baught a case with a keyboard and I can not get it to work. I have tryed every thing that I know to get it to work but it will not work! I would like to know how to get this keyboard in my case to work? Has anyone got any sugestions?

Is the keyboard using a cable or BlueTooth? If a cable, it will not work. If using BlueTooth, I would re-read the instructions provided with the keyboard. 1. Be sure the keyboard is compatible with Android. This should be stated in the instructions somewhere. 2. Put the keyboard into "pairing mode" per the instructions. This usually requires specific button presses. 3. Be sure BlueTooth is turned on in your tablet, and you have told it to "Scan for new devices" while the keyboard is in pairing mode. I have successfully used an old Palm Inc. BlueTooth keyboard with many HP tablets. WyreNut

Consumption Mode in MRP

Hi Gurus,
I am try to use the consumption mode found in the MRP setting if SAP.
My scenario is as follows:
1) Did a forecast of a material for 3 months
2) Created a Reservation between does 3 months
Problem:
1) No compensation was made to any of the forecasted quantities (i.e if forcasted quatities was 100- and the reservation was 20-, the forecasted model remained 100- and a reservation of 20- came up when MRP was run)
Expected Results:
1) Forecasted quantity 80- and reservation 20-, i.e. total 100- not 120-
Any ideas,
Thanks,
John.

Dear Uday,
Your question is related to delivery date proposed in the Sales Order processing. This has nothing to do with the consumption mode in the material master. Instead the delivery dates are proposed as per total replen lead time and inhouse prod time from MRP views.
Regards,
Ashish

Catalyst 2960 POE Switch Consumption Mode

Hi,
I'm curious how I can configure a 2960 to function in POE consumption mode. I know with other switches you can explicitly configure them to only give devices the power they consume and not power based on what class the belong to.
I have read that the following command should do what I need:
power inline consumption wattage
...although I would have thought I wouldn't need to specify the wattage if I wanted the device to tell the switch how much power it needs.
Thanks

Hi,
The "power inline consumption" command is a global config that applies to the entire switch to override the default:
from the command reference guide
Use the power inline consumption global or interface configuration command on the switch stack or on a standalone switch to override the amount of power specified by the IEEE classification for the device by specifying the wattage used by each powered device. Use the no form of this command to return to the default power setting.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750e_3560e/software/release/12-2_44_se/command/reference/cr1/cli1.html#wp8821622
HTH

SOS!!! can not type username/password with heart symbol () to login with keyboard.

My child accidentally added heart symbol (♥) in username, and now I can not login into my macbook air as I can not type the ♥ symbol with keyboard. apple tech service said no such experience before.

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

OMG - A Nokia 6280 with 36x optical zoom...

I just fund this super cool thing and had to share it with other Nokia users/lovers...
A Nokia 6280 with 36x optical zoom...
http://www.c-h-a-o-s.com/2007/06/01/nokia-6280-with-slr-optics/
Regards
Kaspersky

Just to reiterate what it says on that web page: adding an SLR lens to your 6280 will invalidate your warranty, and you probably shouldn't be doing it.
Board Mod Team
READ THIS FIRST!
Click here if you want help from Nokia

Nokia 2520 with keyboard in consumption mode

Similar Messages

Maybe you are looking for