Nokia 2600 classic missing the ENHANCEMENTS option...

HI,
The ENHANCEMENTS option is missing under my SETTINGS.
Is that why I can't hear any sound thru the phone earpiece or the earphones?
I've tried several times to reset the RESTORE FACTORY SETTINGS AND RESTORE ALL under SETTINGS and the problem is still there.
There are no updated software on the nokia website yet.
Can anybody help me out?
Thanks,
Stewart

The 2000-series phones are not usually included in Software Updater, because they are basic phones designed mainly for users who don't use PC Connectivity.
If you are hearing nothing through either the phone speaker of the headset, then it points to a fault rather than a setting, since connecting the headset should switch between the two sound outputs. You may have to get the phone checked by Nokia service.
Message Edited by mccbleue on 23-Jul-2008 09:33 AM

Similar Messages

Nokia 2600 Classic Latest Software Version

Hi,
I have Nokia 2600 Classic. It is RM-340 and the version is 6.82.
I have heard that there is a latest version, i.e, 7.60.
So, what's new in 7.60?
And, the current version that i have (v6.82) doesn't show time in main screen with keypad locked (with security key) and is in silent with a new message (Having a bigger display than Nokia 6030 or Nokia 2626, Nokia 2600 classic can display the other icons in the next line). And, the calender tone is default set to ascending. Are these any bugs?
And, i want all the Indian Languages to be retained in the new version (v7.60).
Waiting for reply.
Bye,
PRAVARDHAN

I notice they fix the screensaver bug. Now when you choose "always" option, the screensaver realy stays always!
Nokia 5320 XM Red v4.13

Nokia 2600 Classic

M one of the really troubled users of Nokia, with some or the other problem occurring with ma previous 2 sets, the new one Nokia-2600 classic. There seems to be a problem that is occuring again n again.Whenever a call comes n then i put ma cell without touching it into charging.The set seems to hang.No effect on it even if u call from some other phone. Prior to this also m Nokia 2630 had same problem so i changed d set.The problem persists.Please help!!!

I have also purchased 2600 classic last month and it hanged 3 times. Also there is variation in the voice level during the call.

Nokia 2600 Classic calendar synchronising with Nov...

I have been successfully using the sync capability for a year or so on the version of pc suite prior to Ovi, for managing my calendar appointments (using Novell Groupwise) on my pc then uploading to my phone Nokia 2600 Classic.
Now that I have downloaded the Ovi suite to my phone, the synchronising no longer works, although all other elements of the software works ok.
Can anybody offer any advice?
Regards
Frostywasp

10-Aug-2008 01:29 PM
outsider wrote:
Hi all,
just to follow up on this issue, I thought some might like to know I've been in touch with the novamedia.de support team. They sent a new version of the plugin, and now I have calendar syncing via bluetooth working (like a charm). However the contacts syncing is still one-way only, from the phone to the computer. Will post here when (if?) this is sorted out
Cheers
Duncan
HI guys,
I STRONGLY SUGGEST NOT TO BUY THIS MODEL!!!
I hv bought this set and am struggling too! I hv bought this set only because, this supports data sync with PC. I hv given it back at the service center but they r clue less. U cannot write anything from PC to Mobile via bluetooth. More over, data cable is not supported by this model, which is agreed by the service center people.
I am gonna ask for compensation for this if they r not able to resolve this problem.
They can't take the consumers for ride like this.
I hv provided them with good support, in the nokia PC suit, the handset shows a lock symbol after pairing. It means there is some software lock which prevents us from writing to mobile from PC.
Any opinions or solutions solicited.
Regards
Prasanna

Deleted Expense Manager in Nokia 2600 Classic

I have somehow deleted Expense Manager in my Nokia 2600 Classic. As this is a useful application, please give me any tips how can I get it back.
thanks in advance.

hey just get a CA-50 data cable.
Download the nokia PC Suite version 7.1.26 from nokia website,
Attach the data cable to your phone and PC.
The Pc Suite will detect your NOkia 2600c-2.
Now in PC Suite click on "connect to internet".
Thats all, you have a one touch access to the internet on your PC.
You can also transfer images, ringtones, etc. through PC Suite.

Assign tone Nokia 2600 Classic

Plse Help me,
how to create a assign tone for a specific number or Name in Nokia 2600 Classic Mobile phone

hey just get a CA-50 data cable.
Download the nokia PC Suite version 7.1.26 from nokia website,
Attach the data cable to your phone and PC.
The Pc Suite will detect your NOkia 2600c-2.
Now in PC Suite click on "connect to internet".
Thats all, you have a one touch access to the internet on your PC.
You can also transfer images, ringtones, etc. through PC Suite.

Reference monitor seems to be missing the setup option

http://imageshack.us/f/11/referencemonitor.jpg/
My reference monitor seems to be missing the setup option also it is displaying in a format I do not understand.

I'm based in th UK and working with PAL mini DV. I imported the footage in and then created the sequences using a clip, so the sequence settings should be correct and having checked them, it seems they are. Admittedly, I've never used this function before and this: http://library.creativecow.net/articles/devis_andrew/YC-Waveform-graph-Premiere-Pro/video- tutorial is my frame of reference. The problem I have is I cannot convert the scale he is working with (IRE) to what I'm working with (V).

I am missing the Software Option from my settings

I am missing the software option from my settings

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

In Bridge CS6, the "Tools" tab is missing the "Photoshop" option to batch process image

Hello!
Does anyone know why in Bridge cs6 under the "Tools" tab, my "Photoshop" option is missing? That is how I have always batch processed images. In Bridge, I choose the images to process, go to the "Tools" tab, down to the "Photoshop" option then to "Image Processor" and process. Now when I go into my "Tools" tab it only has the options: Batch Rename, 4 kinds of Metadata related options and Cache. Can someone tell me why this has happened and how to fix it? Thank you!!!
Eric

Hello Omke,
This problem lasted for two days. I tried many suggestions but nothing worked immediately. Suddenly I turned my computer on last night and it was fixed...inexplicably. Not sure what worked but something did. I appreciate you taking the time to offer advice.
Best,
Eric

My new 160gb ipod classic missing compilation uncheck option in settings

Help just bought a 160GB classic,(i previously had a 60GB classic)my old ipod had an option to uncheck/check compilation in settings>compilations (just under the EQ option) my new ipod does not have this option although the manual and help forums seem to say this is where compilation uncheck/check option is. Is there a fix for this or do I take back to the seller?

Fair enough - I had hoped we were just at cross purposes as to where to look for it on a newer model. What firmware build is the device? I'm assuming it's the September 2009 160Gb with Genius etc. I don't have one in my hands just now but I thought I recalled the menus being the same in this respect. Will check on youngest's iPod later...
In the meantime I'm still not clear which "version" of the option you want, other than it obviously isn't the one you've got at the moment. Which did you want, all artists or just some? One cover for each different combination of album and artist in Cover Flow or just the one? If Apple have changed the way it works on your iPod model, which they have done on the iPhone/iPod Touch, then you may to look at making some changes to the way you tag your library, or return this model and buy an older one on eBay.
For tagging advice, including details of the variations in behaviour on different devices, see http://samsoft.org.uk/iTunes/grouping.asp
tt2

Missing the "none" option in presets when adding user

SL Server, fully updated
When I go to add a user, I am missing the preset 'None" I have 6th grade, 7th grade, 8th grade and Faculty. Why would the None option be gone, I thought that was always there.
Thanks in advance

Did you follow the instructions on that page exactly when creating the account (the instructions won't work with existing accounts) ?
e.g. if currently signed into an account then you signed out of it, and you then found a free app and clicked on its free 'price' :
And then clicked on 'create Apple id' on the popup that you get :
When I tried those steps in response to another thread a few days ago I got the 'none' option on the payments screen

Console One Missing the Action Option

I have a new Netware 5.1 SP6 server installed with GW 6.5. Console
1.35
was installed on this server. I noticed that if I run ConsoleOne from
this server, I do not get the Action option so I cannot remote control
to
PCs. How can I install the remote console plug-in for COnsole One for
this server so that I do not have to open different copy of COnsole
One
for GW administration as well as remote control.
Thanks
Che

It worked!! Thanks for your tip.
Che
> Che,
>
> I'd copy the GW65 C1 down to your local drive. Much better
performance.
> The go to the C1 directory on the server where ZfD3.2 is installed
and
> execute c1update.exe.
> This should copy down the necessary snapins to your local drive.
>
> HTH
> Uwe
>
>
>
> --
> Novell Support Connection Volunteer SysOp
> Please don't send me support related e-mail unless I ask you to do
so.

Nokia 2600 classic - how do I get the back cover o...

I have just bought my first mobile phone ever, so am a complete novice; I have tried to follow the instructions to press the release button and take off the back cover to fit the battery, but I cannot get the cover to open.
The main question is, am I trying to open the phone at the right end - i.e. if the phone is face down, the end nearest to the loudspeaker?
I am loathe to use an implement on the phone in case I damage the case.
Any advice would be very welcome - I feel so stupid!
Thank you.

nothing to be ashamed of, we all have problems with certain phones sometimes.
the back cover of the 2600 is quite big and covers the whole back side plus sides of the phone that's why it's difficult sometimes to remove.
the release button is located at the top of the device , with the phone facing down press on that button, remeber that the body of the button is actually part of the body and not of the cover and so performs as a latch.
while pressing hard enough on that button you can fell that the button goes in enough distance to clear the whole thickness of the back cover plastic. Now wedge your finger nail between the cover and the body anywhere at the top of the device, that should give you enough lift to release the upper part of the cover.
pull up and slightly backward to release the lower part of the cover.
for a diagramtic representation , please take alook at your user manual, available here:
nds1.nokia.com/phones/files/guides/Nokia_2600_UG_EN.pdf .
Fear not those who argue but those who dodge

Nokia 2600 classic - help

this is the problem. i just bought it and whenever i save a wallpaper on tune as a setting it will go back to default settings after being turned off. plz help

Hey Sage
You didn't answer lolangel's question which is the same as mine. When you personalise the 2600 with let's say 1. wallpaper off and 2. clock screensaver on, then turn the phone off. When you turn it back on the wallpaper is back on and the screen saver is off. There are no settings to save these settings the way I want them. Which is typical. I had an old nokia which you could personalise these settings turn the phone off, then back on and they would be as you left them. Specific help on this issue would be greatly appreciated thank you. As well as, the font on the digital clock screensaver is too small for me to see without glasses another regressive change from my old phone that had a standard (non changeable) large font I could read without glasses. Hope you are having a good one and all. Please get back to me with any help you can provide. Again Thank you.
Regards
Jonathan

HT4101 The camera connector suddenly stopped importing photos like it used to. Now it will import 1 or 2 photos and then **** off and revert to the desk top. The Sd reader works, but I miss the quicker option of the cord and connected.

I have two Canon Elph cameras. They both were easy to use with my IPad until two months ago when it suddenly stopped working on either camera/cord. It would check the new photos displayed on the screen and then shut down, import one or two, and go back to the desktop. Frustrating. The SD reader works, though. Is the camera connected faulty?

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Nokia 2600 classic missing the ENHANCEMENTS option...

Similar Messages

Maybe you are looking for