Nokia 2610 Message tones too low

I have the volume set to ring at the next to highest level. However the text message tone is still ringing very low when I get a text. Is there any way to increase the text message tone volume? Also - Why is it that the ring volume decreases when I plug in the charger? I have the option set to use the current profile when charging.

did anyone ever get to the bottom of this? We just bought one of these phones for my dad... when you 'test' the standard message tone, it plays back at normal volume (i.e. just move away from it, then go back to it in the selection menu), but when you send a message to the phone - it plays the message tone at a much quieter volume. We've got ring volume up to full...
any help much appreciated...
Thanks

Similar Messages

  • Nokia 3110 Classic Alarm tone too low

    I brought a Nokia 3110 Classic yesterday and found the alarm tone too low. Tried chaging the Tones, but all of them are too low. Not enough to wake up. can anyone suggest how to overcome this problem.
    Thanks

    get a loud tone there is no volume level for this if your havin trouble i will post a good loud one most nokias now have incremental volume ie get louder the longer they ring but i have good loud one
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Nokia 2610 message display

    When someone sends me a text message, the 'message received' display doesn't stay on the screen so, if I didn't hear the message arriving, I might not realise it was there if I don;t acrtually go to my message screen. How can I ensure a message alert stays on the screen until I open it?
    Thanks!

    did anyone ever get to the bottom of this? We just bought one of these phones for my dad... when you 'test' the standard message tone, it plays back at normal volume (i.e. just move away from it, then go back to it in the selection menu), but when you send a message to the phone - it plays the message tone at a much quieter volume. We've got ring volume up to full...
    any help much appreciated...
    Thanks

  • Nokia 5800 message Tones

    Could anyone please tell me if there is a way that I can assigne a message alert tone to a spesific numeber on the Nokia 5800.
    I know that you can assigne a diffrent tone to a contact if they call and wondered if you can do the same with an sms.
    thanks

    No, you can change the tone for all text messages, but not for individual contacts.
    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • Downloaded ring tone too low

    I just got the phone, about 2 hours ago, its great. The only issue I'm having is that my downloaded ring tone is too soft. It Frankenstien by Edgar Winter so it should play loud enough. The ring tones that were on the phone are loud enough. How do I raise the volume on a downloaded one?

    In itunes, go to the ringtones tab and select all downloaded ringtones. right click and click get info and under options, you can increase the volume slider all the way up if you wish to. then click ok. after that you have to resync your iphone with itunes to get the "louder" ringtones.

  • N97 mini: loudness of message tone

    hello,
    in am using the general profile on a Nokia N97 mini. The loudness of 'message alert tone' is too loud for me.I don't find a variable where I can change the loudness of the 'incoming message' (sms) tone.

    Yes, ringing tone volume controls message tone too. It would be nice to have separate controls. As advised above, you need to try to sort a quieter message tone if you still need the louder ringing volume.
    Alternatively, create a "quiet" profile where both ringing and message volume is low enough not to disturb the room, yet loud enough for you to notice.
    C7-00 Vodafone UK
    E71 O2 UK
    6300 Vodafone UK
    6300 & N97 - resting

  • Too low ringtone n msg tone

    hi
    i recently bought nokia 3500 which is s40 3rd edition.... when i recieve a call or a msg the tone is very low... sumtimes itz really hard to hear it if ur standing in a place wid noises... so any1 can help me figure out how can i increase my tone level... i already set my tone volume to max n the ring style z "ringing"..
    thx

    Here's another suggestion -- MP3Gain
    My comments on how to use it and where to find it are here: (link)
    The instructions for using it to raise the volume are the same as the instructions posted there for using it to lower the volume.
    One more thing.
    At the top of screen, click on "Options" and you'll see this option:
    "Don't clip when doing track gain"
    When this is checked, MP3Gain will try to raise the volume as close as possible to the value you specified; but it will stop short of that value if that value will cause the ringtone to be distorted.
    Omitting the checkmark will remove this restriction
    Here is some advice on setting the clipping option I found:
    http://forums.sonyinsider.com/topic/18810-mp3-gain/
    "As [far as] setting the target, look at the clipping indicator (red "Y"). you want to target the highest number where the clipping is gone. I find the default 89 put the volume too low for my taste, but pretty much guarantee zero clipping. I find 90 or 91 is good enough in eliminating clipping most of the time."
    If you want to apply MP3Gain to audio that you're going to use as music that you're going to listen to on your phone, here's advice on that matter:
    http://forums.ilounge.com/digital-audio-formats/76598-mp3gain-usage-guide.html

  • Nokia 5800xm Outdoor message tone

     When I first got my Nokia 5800xm,  the Outdoor message tone said "You've got a message on your Nokia mobile". It's been  missing a whle now, I can't find it on the net. Can anyone please help?
    Nokia 5800xm firmware V52.0.007

    Hi Stroke2007,
    Welcome to the Nokia forum!
    When you update your device, some functions are removed and some are added to the device. If the tone you're looking for is no longer there, you most likely won't be able to get it back anymore.
    You could, however, record a similair message yourself or record someone else's voice and set this as the message tone for your Outdoor profile.
    Hope this helps, let me know how you get on!
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Amber Nokia Message Tone and volume settings

    I really like the photo updates and ability to block phone calls in the new amber lumia.
    however, something I noticed immediately after receiving some texts is that the Nokia Message Tone was changed. Slightly different tone as well as sounding about 10 times quieter! I always had the volume set at 15/30 and I could usually hear it even if I was in a next-door room to the phone. Now I cannot even hear it most of the time in my pocket!
    Another suggestion, I would make, and it's always been before the update; is making to ability set two different volumes. One for ringer and another for media. I always had to turn volume down when listening to music, etc before. Then turned back up when I finished so the ringer would be set.
    thanks, ps. i need to find my headphones so i can try out the fm radio! It was total false advertising by allphones/nokia that it was on the original features list! Internet radio IS NOT fm radio!!

    Firstly, the features you are requesting are more to do with Microsoft than Nokia.
    Secondly, it has been requested thousands of times by othr windowsphone user. Yuo can add your name to the petition onthe Microsoft site using the link below.
    http://windowsphone.uservoice.com/forums/101801-feature-suggestions/suggestions/1549681-control-ring...

  • Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again.

    Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.

    Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.

  • When I try to run a form I get a message of Jinitiator version too Low

    I've run my first form of Oracle Forms on google chrome but I get the following message:
    "FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
    I can't understand.
    From the control pannel of Windows XP I see "Jinitiator 1.3.1.22"
    I use Forms 10.1.2 on Oracle vers. 10gXE
    Thanks in advance!

    The Oracle Jinitiator is not compatible with modern browsers. In fact, Oracle has discontinued Jinitiator and no longer supports it's use. Michael is right, you should install the latest Java 6 runtime (JRE 1.6.0_33) and use it instead of Jinitiator.
    Since Oracle Forms 10g defaults to using the Jinitiator, you will need to modify your configuration to tell the Forms to use the JRE Plug-In (JPI) instead of Jinitiator. Take a look at Oracle 10gR2 Forms Services – Using Sun's Java Plug-in for information on how to update your configuration to use the JPI.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Nokia 2680 - How to adjust message tone volume?

    How do I adjust my message tone volume in the Nokia 2680? All I see is the ringing tone volume.

    the standard alarms cant be changed volume wise you nrrd to select louder tone here is link for good loud one
    http://mosh.nokia.com/content/531DDB2B1F444F31E040​050A45300E79
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Tivolo storage manager error message is Database Cache Hit Ratio is too low

    Hi  basis friends,we are performing incremental backup from mon-fri.from past two days i was getting error message as 'data base cache hit ratio is too low (97.3,98)and increase buffer pool size value.what is the problem for this error message? how can i overcome this error? give me detail analysis to the issue please.
    Thanks and regards,
    Nani

    Hello Nani,
    The database buffer cache hit ratio is the proportion of Oracle logical reads that do not require operating system (OS) read calls.
    When an Oracle session accesses a block, Oracle executes an instruction path that determines whether or not that block is already in the database buffer cache. We refer to this instruction path as an Oracle logical I/O call.. If the block is not in the buffer cache, then Oracle will execute an OS read call. We refer to this as a physical I/O call.It must be ideally close to 99% and since in your case it is low,that is why you are getting these errors
    Now to increase this you will have to increase the vakue of shortbuffer pool size as suggested by Tivolii.
    Fo that you wil have to increase the value of parameter DB_CACHE_SIZE if you are using Oracle 9i.
    Go through the following link http://download.oracle.com/docs/cd/B13789_01/server.101/b10752/memory.htm
    which will help you understand the concept better
    Hipe it helps
    Rohit

  • Nokia 603 in-call volume too low ?

    Hello everyone. Bought Nokia 603 yesterday and im very pleased with it. however im having a problem with it searched for it and on internet and found nothing. 603's in call volume is way too low. i have set volume to max but still if i call someone or they call me earpiece (not headphone) volume is very low. 
    I want to know that is this a hardware fault or just all Nokia 603 phones are having this issue. Thanks. and is there any solution for it ? and also my phone is running on symbian belle FP1.

    wow 35 views but no reply.

  • Nokia N72 Call voulum is too low

    Dear All, please give me advice. I have just bought nokia N72 the problem is, it has very low call volume. i even hardly able to listen to the caller voice. During call while i use to high the volume it even gets too low at full. .plzzz help

    I am facing exactly the same problem in N72.i purchased it 5 days back.

Maybe you are looking for

  • Playing music while lid is closed.

    While moving, I usually close the lid, but sometimes I want to listen to music on my headphones while doing that. However, the Macbook doesn't let me do that ... I know HPs do since the laptop model that crapped out on me 3 times let me do that. Is i

  • Problem with clustering with JBoss server

    Hi, Its a HUMBLE REQUEST TO THE EXPERIENCED persons. I am new to clustering. My objective is to attain clustering with load balencing and/or Failover in JBoss server. I have two JBoss servers running in two diffferent IP addresses which form my clust

  • MAXL Errors in a Working Script

    Hi All,Making the transistion to MAXL from ESSCMD under Essbase 6.2. I have a script that successfully builds two of my dimensions using the SQL interface from Oracle. What's strange is, even though the script works, mid-way through MAXL log file, th

  • When i save a pdf file its all black. im saving it off a web site.

    i work for dish network. we have to save service agreements and that coustmers sign and email them to the office. been doing this with pdf, but now there all black ucant read them.

  • Clicking one commandToolbarButton in af:treetable shows all buttons clicked

    I have an adf tree table containing two columns of expand/collapse commandtoolbar buttons in all rows. The buttons for a row get activated when a corresponding checkbox in third column of table is clicked. But when i click expand/collapse button for