Nokia 2630 contact search is case sensitive... is ...

Hi
I have a Nokia 2630 since last summer and I find it really annoying that I need to manually toggle between upper-case (for the first character) and lower-case (for the rest of the word) when typing a search in the contacts. Do you know if there is a way of avoiding this? I know that it would work if all my contacts were written in upper-case but that is not the case (and don't want to change that) moreover when the standard entry for a new contact automatically toggles the first letter in capital and the rest in lower-case....
Thanks for your help, experts!!

This is discussed in the following posts:
Case Insensitive Search in UCM
Where is Case Insensitive Search Component in UCM 11g?
Jonathan
http://jonathanhult.com

Similar Messages

BI BEx & WAD F4 Search: How to search non-case sensitive

Dear Colleagues,
is there meanwhile a better and comfortable solution for this problem, or have'nt changed anything since "How to... Search non-case sensitive" paper from 2003.
Thanks and regards,
Wolfgang
Edited by: Wolfgang Taag on Aug 4, 2008 1:40 PM

Hi Gerhard,
I quote from OSS note 914303 :
The BI search requires the TREX Server as of 7.0 Support Package 06 or higher. If the search engine is not fully installed, you can still use the standard search that the system carries out in the database. However, as a result, the search takes longer, <u>it is case-sensitive</u> and it does not support the search for attributes.
Hope this helps,
Best regards,
Olav

Portal content search still case sensitive in EP7?

Hi,
Is searching in portal content still case sensitive in EP7? In other words, if you go to Content Administration -> Search -> iView and type in the name, is this type of search still case sensitive? If not, how do I fix it?
Any help is greatly appreciated.
Regards,
Rick

Hi,
Yes, search in content admin is still case sensitive...
regards,
Senthil K.

How to ... Search non-case sensitive?

Hello,
prior to SAP NetWeaver 2004s we implemented the How to Guide "How to ... Search non-case sensitive" in SAP BW 3.5.
This solution is no longer valid in BI 7.
Does anybody know how to implement a non-case sensitive search in SAP NetWeaver 2004s BI?
Regards,
Gerhard

Hi Gerhard,
I quote from OSS note 914303 :
The BI search requires the TREX Server as of 7.0 Support Package 06 or higher. If the search engine is not fully installed, you can still use the standard search that the system carries out in the database. However, as a result, the search takes longer, <u>it is case-sensitive</u> and it does not support the search for attributes.
Hope this helps,
Best regards,
Olav

Making search non case sensitive

Hi,
I have implemented a search help which I have copied from standard help ‘PREM’. I have created a Database view, taking that View I have created an Elementary search help and I have assign the elementary search help in the collective search help ‘ZPREM’ which is copied from ‘PREM’. In the search help I have two fields (NACHN, VORNA), which are case sensitive fields.
How to make it Non Case Sensitive?
Regards,
Jitendra

Hi ,
without checking "Lower Case" , any case(upper/lower) u are entering will be converted to upper case internally and the respective data will be displayed .
With checking the lower case check box in domain , u will get the exact case data in which u have entered .
but if ur requirement is like , if u enter a* in VORNA FIELD and it should display
a*
A* - ie. all the names starting with the both 'a' or 'A' , then
You can go for Search Help Exit . Inside the function module catch the entered name and select required records from DB as per ur requirement and insert result into RECORD_TAB[] internal table , having standard search help result list .
Regards
DJ

Firefox CTRL+F Search bar searching with Case Sensitive

is this only for me or all ?
Fiefox search bar is working with case sensitive.. if i type in capital.. it is only showing the results with capital.
for example. Type "vishnu" in search bar. it will only show you the small vishnu below.
VISHNU vishnu
is it a bug ? or is it a feature ? if it is a feature, i want to disable it :(

You can remove the check-mark on Match Case if you open the Find bar via Ctrl+F (Edit > Find).

Default Search is Case-sensitive

I go to contributor mode and try to choose an image. A window that contains alll the image content items show up. I type the name of the content item (an image) in the small search text box on the top right side of the window.
It seems that when I enter a value in the text box, it performs a Case-Sensitive search. Is there a way I can make this case-insensitive search. For eg; Let us assume that we have a content item called 'IM_ABOUT_US_ICON'. if I enter 'im' in the text box, I do not get any result. But, if I enter 'IM', I get all content items that starts with 'IM'
Thanks

This is discussed in the following posts:
Case Insensitive Search in UCM
Where is Case Insensitive Search Component in UCM 11g?
Jonathan
http://jonathanhult.com

Search without case sensitivity??

I am trying to create a search function that displays a report based on the search. I have the following query:
select
date_participated "Date Participated:",
highschool_attended "Highschool Attended:",
attending_college "Attending College:",
college_attended "College currently attending:", participate_intercollegiate "Participating intercollegiate:",
what_sport "What Sport:",
what_position "What Positions:",
financial_help "Financial Help:",
financial_help_kind "Financial help kind:",
additional_comments "Additional Comments:",
name_and_address "Name and Address:"
from bcombine_survey where HIGHSCHOOL_ATTENDED like NVL(REPLACE(:P3_Highschool|| '%','0',NULL) ,'%');
My first question is:
1. How can I make that query so that it is not case sensitive.
2. Can i create a query that will search the database for any string that the client puts in? For exanple, if a highschool is named Athens and the client searches for "thens" I want it to pop up the Athens.

Hi BlackMamba11
Try something like:
WHERE UPPER(MY_VARCHAR_COLUMN) LIKE '%' || UPPER(:P3_MY_TEXT_ITEM) || '%'
Hope this helps.
Cheers,
Patrick

Nokia 5800 contacts search problem after phone swi...

Recently bought a new 5800. Used Phone Switch to retrieve contacts from older Nokia, seemed to work ok.
The problem is that ALL NEW contacts added to 5800 memory appear BELOW the contacts list (not sorted) AND cannot be found via contact search. This is very annoying. How can this be fixed?
Thanks.

It sometimes does this.
Unlock the phone, go into the messaging and come back out again.
The "new message" notification should stop now.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Nokia 2730 Contact search problem

Nokia 2730, having trouble searching for contacts, it will only let me search by their first name, anything else is irrelivant.
ie; if I have a contact called 'Bob Smith' and I search for 'Smith' it will not show up.
I think I need this function as I am constantly sending group for organising sporting teams.
I believe I have the lastest software in the phone, brand new out of the box I used Nokia Ovi Suite to try and update it, it said there were no updates available.
Solved!
Go to Solution.

Some ammendment in chanchan05's first post..
In case of S40 phones.. under Contacts settings-->Name display..If 'Last Name First' is selected..then the search is on LAST NAME..but yes, with a corresponding setting it will either search on First Name or Last Name at one time and not have the search functionality of an S60..
@wigwam - Can you explain your problem a bit more ? What comes up when you type 'M' ?..and is it a One Off issue or happens with search for any other contact (e.g. you have a contact called Jimmy and when you type 'J' it doesn't bring his name up)?
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Nokia N97 Contacts search FAILURE

Am I the only one who
is totally disappointed by Nokia? Isn’t this mobile meant for making calls in
the first place? Whenever I enter to contacts and when I want to search for a
contact between my at least 400 contacts, it is useless to use the fast scroll
or kinetic scroll. The search is useless as well as it offers a totally weird keyboard,
it is not even QWERTY or numerical. If only nokia would make the keyboard QWERTY
or like the numerical on regular phones. When you want to write a sms with numerical
keyboard it is fine, but no numerical keyboard or QWERTY in contacts is a SHAME
and DISGRACE. The phone is useless this way.

/discussions/board/message?board.id=topfaq&thread.id=28
try this
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Nokia 206 contacts search & arrangement problem

I have bought a Nokia206 last week & I am facing a problem with contacts. When I inserted the sim card, it showed all the contacts alphabetically arranged & we can search any of the contacts among all..
But after few minutes the contacts were all shuffled & were not present alphabetically. Moreover, I can't search any of the contacts. Whenever I restart my phone, the contacts are rearranged automatically for few minutes, but later on the same problem arises.
I reported this problem to Nokia Care in my city(Jalandhar) & they installed a New Software in my Nokia206, but the problem is still there in the phone. All the contacts are present without any order & I can't search any of the contacts from them.
I request you to tell me a permanent solution regarding this problem as soon as possible.

Last week a new SW version appeared for a short time on the Nokia Server...Then Nokia withdrew it with no explanation.
/discussions/board/message?board.id=communicators&thread.id=18023
One of the first question that was asked when this new SW appeared was.."Has the search function been improved?"
The answer was.."no change!"
One might hope that when the new SW is release it will address this weakness.
I have to admit that I do not know whether the obvious shotcomings in the "search facities" is a resultof Symbian s 60.3 short coming or Nokia SW design..or a combination of the two.
Nokia produced this application but in my opinion it only helps a bit and is not a full solution.
http://europe.nokia.com/A4568514
zayed_honey your phone is faulty and should be taken to the nearest Nokia Care Centre.

Nokia 701 Contact Search Problem

Hi!
I recently formatted my Nokia 701 using code *#0000#
Now when I search for a contact in the search list, it uses the regular keypad (as used during message typing) Instead of the alphabetic keys..
Attachments:
SC001.JPG ‏55 KB

To turn the keypad into qwerty keypad, follow these steps:
Go to Settings>Phone>Language>Writing Language>tap on the language that has a check mark on it (example: English)>Input style for portrait>Qwerty

Search help case sensitivity(ZKREDI)

Hi Gurus!
I would like to add a new field KVERM (Account memo)
to the elementary search help ZKREDI.So I added the
field KVERM to the search help parameter and added
that field in teh selection method Z_KREDI too.
The search help is showing me the selection criteria
and when I put the value it shows as per teh selection also.
The only problem is with teh case . When I put in my selection
any lower case character it says no values for this selection
but at teh same time when I put the upper case chaarcter
like N and do the selection it displays the output list.
Is theer way I cane make this field selection in my search help
also case 'INSENSITIVE' if possible .
Thanks

Not unless there is another filed in LFB1 which is an upper case translation of KVERM. (That's how some of the other search helps work.)
Rob

Business Partner search (case sensitive)

I create a Business Partner with the following details
FirstName - Vikram
LastName - Chandna
When i search the created Business Partner via Tcode-FPP3 by name, the
search is case In-Sensitive(i.e Font case doesn't matter)
But, when i search the same in the Database table-BUT000 directly or in
the SAP Query/Reports , the search is Case-Sensitive.
Why?
Thanks & Regards,
Gagan

Hi Gagan,
The field BU_SORT1 in Table BUT000 which is for search option has data type as Character without Lowercase.If the Lowercase option (in the output characteristicks) is ticked in the table, the sytem will allow you to search based on Lowercase as well.
Regards
Amitav

Nokia 2630 contact search is case sensitive... is ...

Similar Messages

Maybe you are looking for