Nokia 2700 loss network connection!

On the new phone Nokia 2700 classic (after official upgrade to firmware ver. 09.95) periodically disappears icon of a signal of a network, after a while phone show the message "Error of registration of a sim card" and an inscription "there is no service" on the screen. After disappearance of the indicator of a network it is impossible to make a call and to fulfil USSD-inquiry, while on other phone (other brand) with a SIM-card of the same operator the network works absolutely normally. The network appears only after device reboot, hand-held search of a network does not help even. Network miss is often observed at attempt to be connected to EDGE, also the signal can disappear and itself, without what or my operations, in a standby mode. Replacement of a SIM-card has not given any result. Phone works in a range 1800 MHz.
Somebody faced such problem? If it is linked to a bug in upgrade when it is possible to expect the new version from Nokia?

nokia dont give release dates for firmware
try a factory restore
*#7780# security code is 12345
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Nokia C7 - Three Network - Connection Failed - Cer...

Hi there Guys...
Recently updated my Nokia C7 to latest version of Nokia Belle (111.030.0609), Im on the Three UK network and noticed some issues with certain app and the latest versional to Nokia Social, updated from Nokia Suite.
The problem seems to effect apps that have a widget that can be displayed on the Home Screens... I have similar issues with a number of other apps like Accuweather, National Geographic and Sky Sports... I am sure there are more, but have removed them from my phone.
I just get "Failed Conections" or "Connection Unavailable" and the app will not load or open. Just to confirm I have tried been connected to my Wi-Fi and just using the internet signal from Three. I have a perfect signal and can use other apps over the internet without an issue, but the moment I open the above mentioned apps I just get the error and the apps are un-useable.
If I use Nokia Social that came with Belle and not update it, this seems to work, but the other apps don't.
Is this an issue just effecting Nokia C7's locked to the Three UK network (with its firmware) or other users too?
Does anyone know how to over come this?
I have tried re-installing the firmware numerous times, resetting and reverting back to factor settings and delting all data.
I have emailed Nokia Support and they haven't been very helpful, just telling me to do the above and will not confirm if there is an issue with this phone on the three network. They have then told me to visit a Nokia Support Centre, but this not an option, as I purchased the phone off eBay and the seller does not have the receipts to provide the Centre with proof of purchase.

I have this same problem, all was working fine until I updated things. Has anyone found a solution for this, I also reinstalled my phone back to basics and basically had nothing on it, still hasn't fixed the problem. I have tried using wifi, Three's mobile data etc to connect, and nothing. As previous person, I can connected to the internet through other apps and the web icon but not social AT ALL.
C'mon Nokia, sort it out!!

Nokia E6 Belle - network connections

Hi y'all.
I initially had purchased a Nokia E5 last Christmas, but it broke so Nokia traded it for a Nokia E72 - which was supposed to be new but had really weird flaws regarding call connections and the flash LED was useless, so they traded it for an E6...
Been getting used to it over the past weeks, but I still have a lot of doubts regarding certain aspects.
Like, why does the music player suck so badly? I don't want my music organized by albums, I prefer song names. And I want to search my music library by song name...what's with all the crazy obvious flaws?? Meh. Good thing I have an Mp3 device anyway.
The thing bugging me now is this - I have deactivated (I think!) the usage of internet from my service provider, so I'll only go online in wireless mode when I want to. Don't wanna be spending my precious euros by accidentally logging into Nokia Store through my SIM card's internet service. -___-
But I'm not sure if my phone is constantly searching for internet or not. Because in the status bar, right next to the symbols for signal and battery, is another symbol. It's a beacon of sorts, with little waves on each side (is it supposed to appear unless my phone is searching wireless networks by default?), and obviously it changes into a bunch of little waves that show me the force of the WLan connection whenever I chose to link to it.
I don't want it to go "wireless-hunting" solo, I want it to go ONLY when I tell it to, by using the widget or sliding that quick access menu on top. I want to be in control of my battery life, so to speak, as much as possible. xD
Do you thin that the little beacon symbol is normal even though I haven't told the phone to search for wireless? I don't think that is showed when I first started up the phone...only after my first WLan connection. I think.
This E6 came automatically in Belle, when I picked it up from Nokia.
It **bleep** me off that it sometimes crashes, freezes, and the qwerty keyboard won't work (except for the cardinal and asterisk buttons) unless I restart the phone. I wonder why it crashes like that, because qwerty won't work but all other buttons do, and touch screen as well.

E6 Manual in spanish
Belle version...
Perhaps you prefer it in spanish (more people speak spanish than english in the world).
Otherwise, search on *****
About your problem with icons for wlan, just tap it off on the screen when scrolling down the window on main window.
Should solve that icon appereance that is annoying you.
I think that icon you mention is available wlan. Stop scanning by tapping wlan to off.
Have to rush now...
Moderators note: Removed external link. Nokia user manuals in all available languages can be downloaded from http://europe.nokia.com/support/
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Intermitent Loss of Network Connectivity

Lately, some users in our network (a gigabit switched network) have been experiencing intermitent loss of connectivity to their network servers/resources. The message reads: "The connection to the remote computer was broken. This may have been caused by a network error...."
A review of the core switches'logs revealed nothing out of the ordinary and CiscoWorks logged nothing. Does anybody know what else I might be missing here in trying to troubleshoot this problem??

Mparek is on the right track here, check the logs on the server that you are getting the error connecting to. It MIGHT be the network, but often it is the server, either being too busy to respond, or having a malfunction of some type. If it's on a broad range of servers, check the switch closest to that block, but check the pc's first.

Network Connection in Nokia 3220 help..

Anybody who tried network connection in Nokia 3220? I already tried HttpConnection, StreamConnection and ContentConnection to download a simple txt file but none of them succeeded :(

I suspect that the VM is to bussy printing your dots, and has not time to serve other threads.
Put a delay inside the while loop, I guess it will start working then.

Nokia 2700 java apps can't connect to internet ( g...

java apps like opera mini , ebuddy what want internet connection to work can't connect to internet in my nokia 2700 ! pls can anyone help me ??

Alert types yes Customization Download MP3, Video Ringtones, Video, Type Polyphonic, MP3, video tones Vibration Yes Java MIDP 2.0- 3.5mm AV jack- MP3/MPEG4 player
i hope you like these features Nokia 2700 Classic because this mobile are very nice.

Nokia reader network connection

I installed Nokia Reader on N8 (Belle) from betalabs, added a few feeds, and it seemed to work fine. However even when the program is set to 'offline' and then closed, it keeps my network connection alive, which obviously drains battery, costs money etc. etc.
Even when the connection is then closed via the pull-down menu it will immediately reconnect. Same if the phone is rebooted, it persists with trying to stay online.
The only way to break the connection is to uninstall Reader, and then connection is off, and normality restored.
I've tried re-installing it but problem persists.
Any ideas why it's doing this? Is there anything else in the applications listing that I could uninstall which would totally 'reset' Reader and let me install fresh working version?
I'd like to add that all my network settings are correct, and phone works perfectly with all other apps (without Reader installed) and it goes on/offline exactly when required.
Any advice appreciated, Martyn.

Fixed by 10.4.4

Nokia 6086 fails to connect to any wi-fi network

My wife and I both have Nokia 6086 phones. We have been unable to connect to any wi-fi network. The phones recognise the networks but when I press the 'connect' button I get the message 'network connection failed'. I get the same result whether I'm using my home network, with appropriate security settings, or an unsecured public network. So far, neither Orange nor Nokia have been able to fix the problem. Can anyone advise how I can connect?

I was having this problem for a while and T-Mobile told me that the wifi radio needed to be reset and the fastest and easiest way to do this was to pull the battery when the phone is up and running. Next attempt, I could get on wifi no prob.
I was skeptical, but it worked for me. (But only after I manually backed up my important SMS to AIM through copy & paste.)

Loss of network connectivity at random times to guests and now hosts Server 2012 R2 Hyper-v on Dell R620...Guests virtual disks reside on a NAS.

We have set up 2 Hyper-v environments (Server 2012 R2 fully updated) on Dell R620's. The guest machines are configured do that they reside on a NAS (also a Dell R620 with server 2012). We are having an issue on both the environments where the guests will
lose network connectivity. The servers ran well for about 4 weeks and recently the guests started having issues and we have even had to reboot the host due to network connectivity problems.
We have 4 virtual switches set up. 1 connected to its own NIC. 1 for management and the 3 others for guests.
The 3 for guests are not configured to allow host OS sharing.
We do not have IP addresses on the NICS for the guests. Only on the management port. (all 1 GB NICS)
We have updated the firmware and drivers for the standard Broadcom Netxtreme cards.
We do not have Jumbo frames enabled because of some issues with switching compatability.
I've seen articles recommending to turn off TCP offloading and to disable virtual machine queues. Is this best practice?
Any thoughts of where I might look to help diagnose this issue?

Hi ,
"1 connected to its own NIC. 1 for management and the 3 others for guests."
Also you mentioned that : " is only hosting these 24 VMs ".
First please try to disable the RSS in the property of the NICs for guests .
Then run powershell " Get-NetAdapterVMQ " to check the parameter "NumberOfReceiveQueues" (NumberOfReceiveQueues – The number of queues that the NIC has available to use and assign to VMs,
the host and a default queue) .
If I understand correctly ,when you enable VMQ the number of connected VMs on that NIC should not be more than the value of "NumberOfReceiveQueues" -2 .
For details please refer to following link:
http://blogs.technet.com/b/networking/archive/2013/09/10/vmq-deep-dive-1-of-3.aspx
Hope this helps
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

T410 loss of network connectivity - Packet Scheduler Miniport driver

Hi
Our organisation has recently received its first shipment of T410 laptops. After installing our XP SP3 build we're experiencing an issue whereby the laptops are working pefectly, but after a shut down, the next time the device is powered on network connectivity is lost. In device manager, adjacent to each network adapter device, a new device appears for 'Packet Scheduler Miniport' and each of these has a yellow exclamation mark indicating the device us unavailable.
Rebooting the laptop sometimes resolves the issue, the packet Scheduler Miniport devices disappear from device manager and network connectivity is restored. However, after a subsequent reboot the problem returns. We've tried reflashing the system BIOS but affected machines have the most recent version (1.25, 07/03/2010). We've also tried downloading the relevant network driver directly from intel and installing to no avail.
We've been unable to spot any pattern to the fault occuring, it appears to be completely random. has anyone else experienced similar issues with an XP build on the T410? My searches have brought up similar issues relating to the Packet Scheduler Miniport but nothing specifically in relation to the T410. It's worth noting our build for the T400 contained the same application suite and we haven't had a single issue like this throughout the life of that model.
Any help on this is greatly appreciated
Thanks
Solved!
Go to Solution.

Hi I just found your posting regarding the same exact issue I had. The way around this issue is to go to device manager select the Intel adapter for lan and un install it but without removing the application just uninstall the drivers when finish click on scan for new devices and when done you will have a connection it seems like some of the windows 7 libraries clashes with the adapter libraries and fail to acknowledge one to the other.
Hope this helps

Message loss during network connection reset

We are planning on using Oracle streams for async notifications between the database and our Java application. While testing for some edge cases we are running into the following issue.
1) Start Java code(Waiting to dequeue message) -> disconnect network -> queue new message(using SQL) -> connect network ==> We are loosing the message in this scenario, even if we restart the listener the message would not show up.
2) Start Java code(Waiting to dequeue message) -> disconnect network -> connect network -> queue new message(using SQL) ==> This scenario works.
DB stores messages if the listener is not running, but if we start the listener and disconnect network connection somehow the database thinks it delivered the message.
Also is there any way to stop blocking dequeue call during connection drop, database shutdown/restart?
We are using the point-to-point model, messaged is enqueued from a trigger that gets fired on insert/update to a particular table and we have a MessageListener that Uses Java API to dequeue the message. This code works fine during normal operation.

AQ uses persistent storage in queue tables so the first thing to do is see if the messages got into the table.
If they did what is the status? If not the issue is likely that your code never got the messages to the database.

Server Network Connection Loss with fast recovery.

Ok, so we are having an issue where our server is randomly losing network connection momentarily, but for long enough to boot everyone out. VMware seems to be related but we are having trouble understanding if VMware is just a symptom of something else happening or if VMware is indeed casuing this.
I was wondering if you guys might be able to offer your thoughts. At first we thought it was the MIC, and because we had a mirrored server we were able to swap to that and I think rule out that it's the NIC.
Thanks
Please see log below. This is just the first 100 lines.
19/08/13 12:07:56.084 PM vmnet-bridge[602]: Dynamic store changed
19/08/13 12:07:56.084 PM vmnet-bridge[602]: Adapter: en0, Inactive
19/08/13 12:07:56.000 PM kernel[0]: Intel82574L::setLinkStatus - not active 1face000, 0
19/08/13 12:07:56.000 PM kernel[0]: vmnet: bridge-en0: interface en is going DOWN
19/08/13 12:07:56.000 PM kernel[0]: vmnet: bridge-en0: interface en is going DOWN
19/08/13 12:07:56.000 PM kernel[0]: vmnet: VMNetDisconnect called for port 0xffffff80365aa000
19/08/13 12:07:56.000 PM kernel[0]: en0: promiscuous mode disable succeeded
19/08/13 12:07:56.000 PM kernel[0]: vmnet: bridge-en0: disabled promiscuous mode
19/08/13 12:07:56.000 PM kernel[0]: vmnet: bridge-en0: filter detached
19/08/13 12:07:56.000 PM kernel[0]: vmnet: bridge-en0: down
19/08/13 12:07:56.000 PM kernel[0]: vmnet: bridge-en0: detached
19/08/13 12:07:57.085 PM pppd[73135]: l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.29.4), deleted interface setting (name: en0, family: Ether, address: 192.168.29.4, subnet: 255.255.255.0, destination: 192.168.29.255).
19/08/13 12:07:57.134 PM configd[20]: network changed: v4(ppp0:192.168.29.4, en0-:192.168.29.4) DNS- Proxy- SMB-
19/08/13 12:07:57.135 PM vmnet-bridge[602]: Dynamic store changed
19/08/13 12:07:57.136 PM vmnet-bridge[602]: Could not retrieve media for interface ppp0: Operation not supported on socket.
19/08/13 12:07:57.000 PM kernel[0]: vmnet: VMNetDisconnect called for port 0xffffff80361d7400
19/08/13 12:07:57.000 PM kernel[0]: vmnet: bridge-en0: filter detached
19/08/13 12:07:57.000 PM kernel[0]: vmnet: bridge-en0: down
19/08/13 12:07:57.000 PM kernel[0]: vmnet: bridge-en0: detached
19/08/13 12:07:57.000 PM kernel[0]: vmnet: Freeing hub at 0xffffff8035474000.
19/08/13 12:07:57.139 PM pppd[73135]: starting wait-interface timer for l2tp: 20 secs
19/08/13 12:07:57.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:57.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
19/08/13 12:07:57.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
19/08/13 12:07:57.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
19/08/13 12:07:57.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
19/08/13 12:07:57.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:58.000 PM kernel[0]: 22
19/08/13 12:07:58.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:58.085 PM vmnet-bridge[602]: Dynamic store changed
19/08/13 12:07:58.000 PM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,38ff]
19/08/13 12:07:58.000 PM kernel[0]: Intel82574L::setLinkStatus - active 1face000, b
19/08/13 12:07:58.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:58.000 PM kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xffffff8031dad400.
19/08/13 12:07:58.000 PM kernel[0]: vmnet: VMNetConnect: returning port 0xffffff8031dad400
19/08/13 12:07:58.000 PM kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:e0:f7:b6
19/08/13 12:07:58.000 PM kernel[0]: vmnet: Hub 2
19/08/13 12:07:58.000 PM kernel[0]: vmnet:           Port 0
19/08/13 12:07:58.085 PM vmnet-bridge[602]: Started bridge for 2, en0
19/08/13 12:07:58.000 PM kernel[0]: vmnet:           Port 1
19/08/13 12:07:58.000 PM kernel[0]: vmnet:           Port 2
19/08/13 12:07:58.000 PM kernel[0]: vmnet:           Port 5
19/08/13 12:07:58.000 PM kernel[0]: vmnet:           Port 6
19/08/13 12:07:58.000 PM kernel[0]: vmnet: bridge-en0: media 20 dev 0xffffff8033a41428 family 2
19/08/13 12:07:58.000 PM kernel[0]: ip_output: can't update route after IPsec processing
19/08/13 12:07:58.000 PM kernel[0]: vmnet: bridge-en0: up
19/08/13 12:07:58.000 PM kernel[0]: vmnet: bridge-en0: attached
19/08/13 12:07:58.000 PM kernel[0]: en0: promiscuous mode enable succeeded
19/08/13 12:07:58.000 PM kernel[0]: vmnet: bridge-en0: enabled promiscuous mode
19/08/13 12:07:58.000 PM kernel[0]: vmnet: VNetUserIfFree: freeing userIf at 0xffffff8031dad400.
19/08/13 12:07:58.395 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000009 vmnet1/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 6348501084 MessageCount is 100
19/08/13 12:07:58.395 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000009 vmnet1/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 6348501084 MessageCount is 200
19/08/13 12:07:58.396 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 000000000000000A vmnet8/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 6348501084 MessageCount is 300
19/08/13 12:07:58.396 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 000000000000000A vmnet8/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 6348501084 MessageCount is 400
19/08/13 12:07:58.396 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(9) failed to send packet on InterfaceID 0000000000000001   lo0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 9 error -1 errno 55 (No buffer space available) 6348501084 MessageCount is 500
19/08/13 12:07:58.396 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(9) failed to send packet on InterfaceID 0000000000000001   lo0/6 to FF02:0000:0000:0000:0000:0000:0000:00FB:5353 skt 9 error -1 errno 55 (No buffer space available) 6348501084 MessageCount is 600
19/08/13 12:07:58.000 PM kernel[0]: code 22
19/08/13 12:07:58.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:58.646 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 000000000000000A vmnet8/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 8028798216342761815 MessageCount is 700
19/08/13 12:07:58.897 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000009 vmnet1/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 10643468882 MessageCount is 800
19/08/13 12:07:59.000 PM kernel[0]: 22
19/08/13 12:07:59.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:59.142 PM mDNSResponderHelper[76029]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
19/08/13 12:07:59.142 PM mDNSResponderHelper[76029]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
19/08/13 12:07:59.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:59.479 PM mDNSResponder[100]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000009 vmnet1/4 to 224.0.0.251:5353 skt 8 error -1 errno 55 (No buffer space available) 10643469463 MessageCount is 900
19/08/13 12:07:59.000 PM kernel[0]: 22
19/08/13 12:07:59.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:59.690 PM pppd[73135]: l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.29.4), current interface setting (name: en0, family: Ether, address: 192.168.29.4, subnet: 255.255.255.0, destination: 192.168.29.255).
19/08/13 12:07:59.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:07:59.000 PM kernel[0]: ip_output: can't update route after IPsec processing
19/08/13 12:07:59.705 PM racoon[265]: IKE Packet: transmit success. (Information message).
19/08/13 12:07:59.705 PM racoon[265]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA).
19/08/13 12:07:59.705 PM racoon[265]: IKE Packet: transmit success. (Information message).
19/08/13 12:07:59.706 PM racoon[265]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
19/08/13 12:07:59.706 PM racoon[265]: Connecting.
19/08/13 12:07:59.706 PM racoon[265]: IPSec Phase1 started (Initiated by me).
19/08/13 12:07:59.706 PM racoon[265]: IKE Packet: transmit success. (Initiator, Main-Mode message 1).
19/08/13 12:08:00.000 PM kernel[0]: ip4_output (ipsec): error code 22
19/08/13 12:08:00.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
19/08/13 12:08:00.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
19/08/13 12:08:02.114 PM racoon[265]: IKE Packet: transmit success. (Phase1 Retransmit).
19/08/13 12:08:02.252 PM digest-service[76044]: label: default
19/08/13 12:08:02.252 PM digest-service[76044]:           dbname: od:/Local/Default

If you're not current on your VMware software, patch that to current.
Please then consider asking the VMware folks directly. They'll be looking for details such as your version and the guest operating system. Also probably for the network configuration within the virtual machine; the details of the virtual network set-up.
In general, there's not a whole lot of VMware discussion traffic here in the OS X Server forum. There's also little or nothing on that stack that looks specific to OS X Server in that log. That is mostly VMware chatter, with some generic OS X networking for mDNS (Bonjour) traffic.
Put another way, this forum probably isn't the best spot to get an answer. The folks in a VMware forum will likely have a rather better idea of what those log messages really mean, and may well have seen this sequence before.

Loss of network connectivity

I have a Macbook that is just over a year old.
My wireless connection infrequently hangs, and i have to either restart my router (Belkin 54g) to get it going again. I cannot reliably recreate the hanging, but it does tend to happen when I am downloading large files or watching streaming video - the other day I had to restart my router 6 times just to check my email!
As I say I tend to notice the problem either downloading podcasts or other files through safari by noticing the throughput falling. The way I confirm i have a problem is to open Safari - I try to connect to a reliable website (such as news.bbc.co.uk) and the the blue progress bar stops after the " http://" - eventually timing out with an error of "Safari Can't connect to the server."
I have tried restarting my Macbook, enabling disabling my airport connection, but it made no difference. The only way I could it it going again was to reboot my router. So presuming it to be a problem with the router I replaced it.
I obtained another router (Linksys N) and all seemed ok initially but even that has now shown the same problem. Trying to download a file this week I discovered I could nudge it a long by switching between the 2 different wireless networks/routers now have to download the file.
I have tried clearing out system cache's, deleting and recreating network connections, even reinstalling OS10.5 (but keeping user accounts), and it still seems to be happening.
I have run Apple hardware test, and no errors have been found.
I've checked my log files but nothing seems to stand out as being a problem, but i don't really understand what I'm looking at!
Unlike other reports, my network connectivity and signal bars are all ok - I can even connect in to the router console, but i can't connect out to the internet.
Does anyone have any ideas please? What can i look for in the logs ? Is there someway to check to see if its a problem with my built in Airport card?
Thanks in advance.

You have my sympathies....
A few things I guess but not necessarily in this order or everything:-)
-Removed non Alpha characters from my SID
-Changed the cable from my modem to my router
-Reset my Modem and checked all other connections
-I gave my account Admin permissions while I running updates and tidy ups (which reminds me I must change it back)
-The tool I used to clear caches etc was a freeware download called Onyx (http://www.titanium.free.fr/pgs2/english/onyx_leopard.html) based on a recommendation I heard in a podcast - take backups and use at own risk
-Minimised the channel clashes with other routers and switched other wireless devices/routers off that could conflict.
-Tidied up any dead or unnecessary connections in Network System Preference panel, and made my Network to the top!
-Installed update to iStat Pro 0 you might try un-installing and reinstalling
Good luck

Error: Network Connection Timed Out

I am beyond ****** off at the moment. My iTunes was working perfectly until two weeks ago, and now it insists my Network Connection Timed Out when I try to access the store or update podcasts.
It can't be my internet connection, because as you can see, I'm able to access the internet. For some reason it's this specific copy of iTunes (7.5), because the iT7 downstairs works perfectly. Of course, since Apple are so fecking stingy, I can't add a few files from there without wiping everything off my iPod.
So here's the run-down:
I'm using a Dell Inspiron 8600, Windows XP, browsing with Firefox and attempting to load the latest podcasts onto my iPod Shuffle. I don't give a toss about downloading songs, I just want to update my podcasts without having to search the net for the source file.
I ran the Network Diagnostics and it insists the Conneciton to iTunes failed, suggesting I adjust my cable (i don't have one - it's wireless) or flush my dns settings (which i've done several times).
I found a thread on these forums from March and tried every solution:
- uninstalling and reinstalling itunes... doesn't work.
- opening Internet Explorer 7, then opening iTunes... doesn't work.
- searching for a host file and removing the phobos apple line... doesn't work. The phobos line wasn't there
- using itunes 7... doesn't work.
- flushing my dns... doesn't work.
- turning off my firewall.... doesn't work.
- avoiding clashes with mcafee or zone alarm... doesn't work, cos i don't use those
I think it's appalling that I've tried all this, and i'm still no closer to knowing what the problem is, and that Apple failed to respond to any of the other people's problems in the earlier thread. And that i spent about ten minutes signing up to this fecking forum just to ask for help. Surely support should be readily available to anyone!
Can anybody help me? In the other thread, people found alternative sites for buying music, but has anyone got an alternative, ipod-compatible podcasting program?

I have this same problem. Here's what I can add to this discussion - iTunes accessed the iTunes store a day or two ago. I have a home network and can access the internet from all of the networked PCs. I can access the iTunes store from all of the networked PCs using Internet Explorer. I can access the iTunes store from my laptop iTunes. I can not access the iTunes store from my workstation PC. I get the same "network connection timed out" message. I downloaded and installed a new (same version) of iTunes on the workstation PC. both the laptop and the workstation are running the same OS (Windows XP SP2), both are Dell computers, both are accessing the internet via a wired connection to the same switch and the same router. All other internet connections work fine.
What's different? In the last couple of days my Workstation lost access to a network printer. I worked with HP for over an hour to re-establish network connection to that printer with no success. I have access to the same networked printer from my laptop.
The IP address for the network printer is identical to what it was when it was installed - HP suggests looking for a change to the IP address. I made no changes to the workstation PC, the home network or the router, ISP, or internet connection.
But, it seems to me that the loss of access to the HP networked printer and the inability of iTunes to access the iTunes store are related.
I also called Apple and attempted to get technical support. I own 4 iPods with 104 Gbs of storage on them, I own 1900 CDs and iTunes has 36.5 days of music loaded into it.
I purchased Apple Care on all of the iPods - it's expired and they never warned me. They want to charge me $29 to fix this problem - even though I no longer can purchase music via the iTunes Store, so I need to pay $29 in order to gain access to the iTunes store to spend more money with Apple?! Not a smart business decision. I own a few other PC based music programs and more than willing to transfer all of it out of iTunes and into one of the other products. I'll sell all the iPods on eBay and purchase other MP3 players if I must.
But, I suspect the problem is (1) Apple doesn't have a documented answer to this problem, (2) the level 1 techs that answer the support phone are clueless - they just e-mailed me the same article from the Apple website that I told them I read and does not apply to my problem, and obviously does not resolve my problem. (3) Apple is not setup to resolve this type of problem with their level 1 support, and they can't escalate the problem without charging us.
I'll try again on Monday, may even purchase Apple Care first and then use that. The Apple Care Tech Support is typically better than the free level 1 call in support.
Suggestions, comments, etc. are all appreciated.
nlc
<SCRIPT language=JavaScript>

</SCRIPT>

The network connection could not be made

I'm getting this for some but not all of my 13,000+ songs in iTunes match. I've tried 3 different computers, a variety of Mac, Windows, Windows 7 and iPhones running ios 7.
I've managed to see some of my songs and download 1,000+ songs to a newly authorized computers. Its distressing because I had a hard drive crash a while ago and I am beginning to think I've lost mucho music.

i have iTunes 6.02 and i can't connect...
here's what i posted in my own thread:
"iTunes could not connect to the Music Store. An unknown error occured (-3221). Make sure your network connection is active and try again."
i'm connected to the internet... i've tried little things that i've read in other threads.. but i'm at a loss. no matter what i do, i get this error message.
my itunes has given me problems for a little while. i uninstalled it and reinstalled it twice already. it doesn't recognize when i put a cd in.... and when i can get it to play songs (i have to manually open it from the file menu) i can't get it to get CD info, it still says "Track 1, etc..."
i have no idea what to do...
if you could help, that'd be amazing.
nevermind... i can't even get it to play my cd at all now. i get this pop up when i try to import: "The file "Track01.cda" cannot be imported. An unknown error occured. (-50)"

Nokia 2700 loss network connection!

Similar Messages

Maybe you are looking for