Nokia 2760 how to turn on the loud speaker and how...
i have the 2760 phone how do you turn up the volume can't hear when someone is talking and how do you turn the loud speaker on any help is welcome
when in call select options you will see activate loudspeaker when in call to higher volume use the volume toggle to adjust loudness
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Similar Messages
-
How do i turn off the external speaker on my brand new iPod touch
how do i turn off the external speaker on my brand new iPod touch - it is very annoying
Just turn the volume fully down using the lower button on the upper left side of the iPod.
You can also go to Settings>Sounds to turn off alert and ringer sounds. -
what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem
Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers -
I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks
Hello Terryfrank,
Congratulations on your new laptop! Also, thank you for the details of the issue you are experiencing with transferring your iTunes Library to your new computer.
I notice that you are coming from the article “iTunes: How to move your music to a new computer,” and it sounds like you might have used the Home Sharing method outlined in that article.
With Home Sharing, you can stream content from another computer, and it sounds like that is how you have it currently set up. The last step is to import the content to your new computer. Use these steps on the new computer (while the old computer is on) to import the music to your new computer’s hard drive:
Once your new computer sees the Home Share from your old computer, click that Home Share on the left side of iTunes on your new computer.
Select the content in the Home Share that you want to transfer to your iTunes library on your new computer, or choose Edit > Select All to choose all of it. Then, click the Import button in the bottom-right corner of iTunes.
Wait for the content to finish transferring.
Additionally, if you want to transfer your playlists, you can export them from the old computer to the new computer:
Transferring playlists
If you want not only your content but also your playlists to exist on your new computer, you will want to transfer a copy of all your playlists from your old computer. To do this, choose File > Library > Export Library on your old computer. Save the XML file that is created to your desktop.
Send the playlists file to yourself as an e-mail attachment, use an external drive, or use file sharing to move the playlists file to your new computer. Once the file is on your new computer, open iTunes and choose File > Library > Import Playlist. The import process will remove any items from the playlists that you didn't share via Home Sharing.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thank you for using Apple Support Communities.
Best,
Sheila M. -
?( How turn off the onboard speaker???
MSI kt3 ultra2...I just wondering how to TURN OFF the onboar speaker?
Hi,
do you mean onboard audio AC'97 ? or onboard buzz speaker?
If it's the buzz speaker, I think you might have to solder the buzz speaker off the board (that voids warranty too!)
If it's the onboard audio, it can be disabled in the BIOS, integrated peripheral - onboard AC'97. -
After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
switching off wifi and on again or going into airplane mode did't help!
This problem happens only with ad-hoc wifi networks not with normal ones.
(Ad-Hoc network was created on XP Computer)Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much. -
The music i being played on the loud speaker while...
hey all... i have an n79 phone and it has the firmware 11.049.... while am listening to music via the headset... and the mobile is silent... when someone send me a msg ...the music starts to play on the loud speaker not on the headset... how is that if the mobile is set to be silent and the headset is connected.... anyone have this mobile plz try it... and if u have got any way to solve this issue please notice me... thanx all
Message Edited by kholio_baddawi on 10-Mar-2009 02:35 PMTry this and see if it solves your problem.
1) Swipe up to display and access the control center.
2) On the right of the AirDrop cell you should be able to see another cell with the name of the TV the phone claims to be connected to.
3) Tap on that cell and you should get a list that allows you to choose where videos should be sent to. Select the iPhone. The name of the cell should now become "AirPlay".
Does this solve your problem? -
Safari icon has turned into the generic icon and doesnt work anymore
Safari icon has turned into the generic icon and doesnt work anymore
Reinstalling Mac OSX 10.5 (Archive and Install) may be the step.
-
when i take a call or dial a call in the high density traffic area or noicy area i can't hear properly so at that time i put my phone in the loud speaker mode.
I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you -
Help!! First of all I am a senior and have no idea what I am doing. Turned on the Apple tv and it said downloading the lastest -cannot remember the rest.
There was a Apple symbol and a dowmload space under it. Nothing is happening. It has been about 25 minutes. What do I do??It probably did not turn itself off. It most likely went into "sleep".
Did you try to restart the Apple TV? That is what solved the problem for me.
Go to the main AppleTV menu - you might have to press the Menu button a couple of times to get there - select Settings, then Select General, scroll down to Restart and select that.
As long as you don't have a "Do not unplug" message on your screen, unplugging the power cable, waiting a minute, then plugging it back in should accomplish the same thing. I always prefer using the menu method over unplugging.
If that doesn't work, I fear you might have to contact Apple. They will likely tell you to restore your AppleTV to factory settings. That will be a pain in the neck since they will need to walk you through it. They might do that for you at an Apple store. I'm a senior citizen too, and it's easy for me to look helpless - even though I've worked in computers and networking for a very long time.
Sorry I can't offer any better advice. -
The only time the sound/speaker and mic don't work is when I answer or make a call
The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty -
My ipod wont play music solely through ear phones it will only play through the main speaker and the earphones together. Is this able to be fixed??
I am also experiencing some problems with the new software version, I bought the Belkin TuneBase for my car 25 days ago it had been working fine since I upgraded my Ipod 2 days ago, you know that sometimes if you don't get good reception you can change to a diferent preseted station on this Belkin Transmitter but since this Ipod upgrade I can't change to a diferent station and also i can't disconect it like before because before it said you were ok to disconect and I'm afraid to return because perhaps afterall is a software problem.
-
How do you Turn off the front Speaker
Hi everyone,
I hope this isn't too much of a stupid question since the answer is probably very simple, but I just cant seem to figure it out...
Does anyone know how to turn the music coming from the front speaker in the Mac Pro?
Any advice is appreciated,
Thanks
Terry
Mac Pro Mac OS X (10.4.7)Thank you everyone, unfortunately I can't find the right setting under the control panel
Here's a strange variation to this that I'm wondering
if anybody else has seen.
I plugged in some analog speakers via the line-out in
the back and set the output to the line-out.
Everything goes thru these speakers EXCEPT when I
play a quicktime movie. That is, double-click a QT
movie and it opens (although in the Finder, not
Quicktime Player) and the sound comes out the front
speaker -- which should only get the system sounds
(as I have it set in the sound preferences).
Anybody else see this strangeness?
Mac Pro 2.66, 1GB RAM,
320/320/320/320 RAID1/0 HD Mac OS X (10.4.8) -
How do I turn off the fancy flick and pinch features in the iPad?
I'm using my iPad with my son who is severely physically handicapped. He can't do a simple single finger tap and instead uses all five fingers on the pad while moving his hand back and forth. This actually works just fine within the apps he wants to play with, however he often accidentally switches apps, pulls down the calendar, or pulls up more options because he is accidentally performing fancy moves on the pad by mistake. Can I turn off those features - or maybe lock the screen so it's "stuck" in one app and can't move to another by accident?
You can turn off the multitasking gestures which may be causing the screen to move form app to app when he swipes left to right or swipes up from the bottom.
Go to Settings>General>Multitasking gestures>Off. That should help some.
Unfortuantely - You can't turn off the notification center - the calendar that pulls down from the top. If you swipe down from the top, that is always going to appear on the screen.
And there is no way to simply lock into one app. You can lock the screen orientation via the side switch or in the task bar at the bottom of the iPad - double tap the home button and swipe to the right to find the screen lock icon all the way on the left - it isn't locked by the side switch.
There may be iPad cases that will aid you in preventing your son from accidentally performing these screen movements with his hands, however, you would have to search for those with a Google search or maybe post a more specific question in this help site in order to get input from others in similar circumstances. You need something along the lines of a kiosk case - but one that allows more freedom of touch. -
I have transferred my itunes content and playlists to a new computer using home sharing. Now I want to use my new computer only, so need to 'turn off' the old one. What do i do?
Hello shiv99,
Welcome to the Apple Support Communities!
I understand that you have used Home Sharing to play the music from one computer on another, but now you would like to only use the new computer. It sounds as though you have set up the content to share between computers, but have not actually I’m ported the media from the old computer to the new one. I would suggest following the troubleshooting steps located in the attached article to import you music from the old computer to the new one. After that process is complete, you can turn off Home Sharing if you would like and the content will be in the iTunes library on your new computer.
iTunes 12 for Mac: Use Home Sharing to import items from another iTunes library
Have a great day,
Joe
Maybe you are looking for
-
Unable to caluclate cost in CJ20 for wbs and network level.
Hi All, I have a query in the project Builder(CJ20N). I created Project>WBS Elements>Network> and posted costs via assigning activity. If I select an activity and go to edit>Costs, the "calculate costs" option is activated. ( I get "Message Costs w
-
Dear Experts, How can I extract the ABC Analysis report in MC40 to excel? Thanks in advance, Mel
-
I dont know how this happened, but recently i have not been able to work on iWeb for a period of time (less than a couple of minutes) without it closing automatically. It gives me an error message saying 'iWeb quit unexpectedly while using the SFWord
-
Creating Excel Using OLE through ABAP
Hi Experts, Can anyone help me in running an abap program to give an Excel file using OLE.. Regards, Seshadri
-
SXPG_COMMAND_EXECUTE failed when executing cleanuplogs in TR DB13
Hi, I am getting SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error when executing cleanuplogs program in DB13. I have the correct DBHOSTNAME configured in profiles, my SAPXPG rfc is pointing correctly to the database. Also I have the requi