Nokia 301 wifi or BT tethering for ipad????

Hi,
is it possible to get a wifi access point at the Nokia 301? Its a S40 mobilephone..dont know if JoikuSpot will work.
cheers
Solved!
Go to Solution.

thanks a lot!
don´t get me wrong... by simple i meant something with a "keyboard" on it.. i found that touch displays aren´t the best for working... i use a Samsung Galaxy s1 and i have to drive a lot with the car... its a bit awkward to use a touch phone while driving.. cause the speech control (or how this will be called in english) is stupid as hell. To exept a call u have to twiddle a lot with the mobile phone.. there is no possibilty to start the call with an activatet speaker right away...
Thanks for the Help!

Similar Messages

  • What is the cheapest way to get wifi in a home for Ipad mini - if we already have internet (but no wifi setup)

    Trying to get my sister set up with wifi.  She is getting an ipad mini for Christmas and has internet, but no wifi.  Is there any restriction on the Airport version that this ipad mini will/won't work with?
    I have found many 'used' Airport Express units on Amazon, but just need to make sure that these older models will work with this new ipad mini for her.

    I don't use Facetime, but if it is available on the Internet, she will be able to access it by entering the Web address for the site in the browser of the iPad.
    I just need something inexpensive since we are having to 'add that' for her.
    Since you are familiar with Apple products, the Express would make sense.
    The setup of the Express will very easy from the iPad. Look for the info in this link about Easy Setup:
    http://www.apple.com/airportexpress/#setup
    You can download a manual for the Express Model A1264 by using the link below:
    AirPort Express 802.11n (1st Generation) - Setup Guide

  • Does MMX400R wifi pocket router support for iPad?

    I'm using iPad wifi module.  I'm planning to purchase MicroMax pocket router 400R. I just want to know the pocket router will support iPad.

    no i don't think it does wps. but i think you can still configure the wireless router with the ipad. if you connect to it, just type in the gateway address into safari, logon, and configure
    uncle_tungsten wrote:
    Sorry, I left out an assumption.  The router has not been configured; there is no configured SSIS, username, or password.  The wireless router requires an Ethernet connection be made with a PC, to connect to the IP address of the router and configure it.
       In my case, I want to configure without using a PC.  The router supports the WPS protocol which does not require configuring the SSIS,username, password.  My question was whether the iPad supports that protocol.  Then, I should be able to enable WPS and click the WPS start button on the router.  The iPad should then connect.

  • Wifi extension to outbuilding for ipad

    I have fully converted my detached double garage into a games room with power, and a bt point. What is the best/cheapest way to extend the wifi range from my netgear home hub so that i can use my ipad/connect to icloud in the garage? Have tried a repeater, but solid walls and/or range make this unsuccessful.
    I have heard of wifi extenders which use power supply or shall I buy another router seing as I have a BT point?
    Thanks

    i did as many times. Now i'm online by macbook, the last reply i wrote to u was by ipad! ^^
    and see, now this problem happened again.
    when i'm on mac, the ipad internet (still connected), then i go on a sample website but it says cannot open page. safari cannot open the page bc it is not connected to the internet! IT IS SO WEIRD........
    So?!!?!?......

  • Nokia 301 Tethering

    Does anyone now if the Nokia 301 supports 3.5G tethering with Nokia Suite?
    Ta
    BB
    Solved!
    Go to Solution.

    Not via WiFi. It can tether via Bluetooth and Data Cable to use the phone as a modem.
    Data cable will be the best if you wanna achieve high speeds because transfer speeds over Bluetooth are quite slow.

  • Nokia 301 - worked 5 minutes

    Hey guys,
    I just bought a Nokia 301, after starting it up for the first time and knowing with all the bugs that are on the forum, I decided to updatet it to latest firmware. It downloaded the update, went onto installing it, and after it I got a white screen and after that the phone went dead. I left around 30 minutes, thinking it was working on the background, took the battery out, put it back again, plugged it in the charger but still nothing.
    Holding the power button sometimes it vibrates, but in other cases it's just a black screen in a black plastic case... I contacteted the service and they promissed an exchange phone in 2 weeks...
    I am just wondering if there is any chance to turn the phone on, or I have to wait for the replacement phone? I didn't even made a call with it, like I said it worked for 5 minutes.
    This is far the worst ever experience I ever had with a phone, so far the record was with a Motorola that lasted 4 hours.

    csimby:
    yep, unfortunately the only option would be to take the phone to the a Nokia Care service point (or the shop where you bought it) and get it either reflashed or replaced.
    could you send me the phone IMEI number via private message? That would help us to investigate whether there is something wrong with the update package you downloaded. 
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • Can I use hotspot tethering in iPad mini with wifi??

    Can I use hotspot tethering in iPad mini with wifi??

    You can use an iPhone (if your carrier supports it) as a personal hotspot for your iPad and use the phone's cellular connection to go online with your iPad - your iPad will see the phone as a wifi network.
    If you are asking if you can share an internet connection from a wifi-only iPad then you can't, only cellular models potentially allow you to share its connection with other devices/computers.

  • IPad 2 constantly drops WiFi connection when tethered to iPhone via Hotspot

    I have a wifi only iPad 2 that I tether to my iPhone 4 via the personal hotspot. The iPhone and the iPad are constantly being separated throughout the day and my problem is that when the iPad gets back in range of the iPhone hotspot it won't reconnect at all! In fact the iPad no longer sees the iPhone as a wifi option in the network list even though the iPhone hotspot is running just fine (other devices cam still see and connect to the iPhone hotspot)
    I have to turn off the iPhone hotspot, wait 2 seconds and then turn it back on. Then the iPad sees the hotspot again and connects.
    Also if I turn the auto lock off on the iPad so that it never locks, then it will reconnect to the iPhone hotspot just fine. But the problem with turning auto lock off is that the screen has to stay on all day!
    There is obviously something wrong that is happening when the iPad locks. It drops the wifi connection and then does not reconnect when I turn the screen back on.
    Is there anything I can do to make sure the iPad reconnects to the hotspot whenever I get back in range without having to keep it on all the time?
    Message was edited by: dawgma

    I found this post on another thread and tried it for tethering my iPad 2 to my iPhone 4 and so far it's worked great. Good luck!!
    jlchatelain
    Re: iphone 4s - HOTSPOT - WILL NOT STAY CONNECTED
    Mar 13, 2012 1:20 PM (in response to coalxman)
    I have been having that problem for 6 months and my IT guy finally found a solution by mining the web. I don't know the source of the answer to give credit but it works !
    Text of blog posting below:
    t does, thanks! I was getting really frustrated with connecting my iPad to my 4S via Personal Hotspot. After a fresh boot of the phone it would work as expected but if the connection was terminated (say by switching hotspot off and on) or after the two hadn't been connected for a while it got into this state where I could see and connect to the hotspot but it would drop a few seconds later then try again over and over.
    After a lot of experimenting I finally figured out that there seems to be a pretty serious bug in the hotspot's DHCP server. AP discovery and WPA authentication work great but in this weird state the iPhone will not give the connecting device an IP. The only solution to fix the DHCP server is to reboot the phone.
    That being the case, grasshoppertrekker's advice is bang on - you need to give the connecting device a static IP address. This gets around the DHCP issue.
    For the less technically inclined, here's how to do that with an iPad:
    - Reboot your phone and connect to the hotspot as usual and ensure the connection works
    - On the iPad go to Settings - WiFi and tap the arrow to the right of your iPhone's name
    - Write down all the values you see under the DHCP tab
    - Tap the Static tab (or Manual)
    - Enter in the same values you just write down
    - Hit "WiFi Networks" at the top to go back
    The iPad will now reconnect using the same settings as DHCP would have given it, but without relying on the broken DHCP server.
    Optional extra: Instead of using whatever DNS values the DHCP server (and by extension your mobile data ISP) gives you, use OpenDNS IP's instead. This will speed up YouTube due to their partnership with Google and prevent your ISP from traking your web usage via DNS interception. To do this enter the following into the DNS field under the Static tab: 208.67.222.222,208.67.220.220 (note the comma)
    Like (0)

  • Transfer app for nokia 301

    Hi!
    I purchased a nokia 301 device. I would like to transfer my contacts from my old phone, a nokia 700. I would like to install the Transfer app but I do not have a data connection, there is no wifi in this device and of course neither nokia suit nor nokia pc suit recognize nokia 301. So is there a way i could install this app on my phone, so i can transfer my contacts?
    Solved!
    Go to Solution.

    eliakwu, scoobyman is right, because Symbian and Series 40 devices offer Bluetooth SyncML (OMA DS). Nokia Transfer is about Windows Phone, Android and iPhone devices because those only offer Bluetooth PBAP.
    Another way would be a SyncML service on the Internet, like GMail, because then you can transfer your contacts and with some SyncML services even your calendar items. However, you stated you do not like Internet.
    eliakwu wrote:
    neither nokia suit nor nokia pc suit recognize nokia 301
    Yes, Nokia Suite does not work, which is confirmed.
    PC Suite works after installing the latest Connectivity Driver. Furthermore, do not select the ‘sync and connect’ USB mode because this is PTP. Instead, select the modem mode (USB CDC WMC  and ACM). Then, the PC Suite works for several other users on this board. Of course the Map Loader and the Software Updater do not work. Although I am not sure whether the PC Sync feature is enabled. As I do not own a Nokia 310 myself, can anyone else confirm that?

  • HT1414 My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email for

    My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email format?

    Change it to an email address.
    -> https://appleid.apple.com/

  • I want to enrol in the developer program but am unsure which one to enrol in. I currently work fro a business employing 2-3 people and have clients asking about apps for ipad iphone and i also run my own personal marketing business with my wife.

    Which developer prgram do i enrol in.
    I work for a small company which my brother and myself run and i also have my own business which i run with my wife.
    Which developer program do i enrol in for creating ios apps for clients for ipad and iphone?

    Choosing an iOS Developer Program / Which Developer Program is for you?

  • My MacBook works fine wifi everywhere except for home.  The home wifi is fine with the iPad and iPhone.  How can I fix my MacBook?

    My MacBook works fine wifi everywhere except for home.  The home wifi is fine with the iPad and iPhone, so I assume the issue is with my computer.  My computer works fine on wifi networks elsewhere.  The only problem is at home.
    The computer "connects to the wifi," but browsers and other internet-dependent software do not work.  Curiously, if I connect the ethernet cord that doesn't work either. Usually if I reset the modem to factory settings twice (for some reason, once doesn't do the trick), my computer will fully connect to the wifi.  However, in a few days, it goes back to not working.
    Today, resetting the modem didn't work. I could only get wifi connection while in safe mode, but not in normal mode.  So, the issue seems to be software not hardware. I have tried starting new accounts in normal mode, but those also don't connect properly to internet.
    Not sure if this is relevant, but this problem started when my building switched internet providers from ComHem to Telia (I live in Sweden).
    What do you recommend I do?
    Thanks!
    PS I use Snow Leopard: OS 10.6.8

    Not unless the modem is causing a problem.
    What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

  • How do i get a wifi connection at home for my ipad from a imac

    how do i get a wifi connection at home for my ipad from a imac

    If you have a wired connection to the iMac and you are asking about using the iMac for the Internet connection for the iPad, you will need to use Internet Sharing on the Mac.
    No clue which OS version you run on the Mac, but here is a link to help with 10.6 and this will get you started. You can Google " Internet sharing with Mac OS ...." and come up with a number of support articles.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8156.html

  • I am unable to connect my mobile hotspot as wifi for ipad - Always dismiss

    I am unable to connect my blackberry mobile hotspot as wifi for ipad  but during connecting message comes as dismiss

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Maybe you are looking for

  • Re: Scaling up the Express Development Environment

    Paul, We have two BM's and two AM's. We had two full-time developers and 2 part-time. BM1: 25 classes BM2: 8 classes AM1: 65 windows AM2: 22 windows 2-3 classes in each BM had to be duplicated becauses of the problem that you mentioned. What we did t

  • Link phone to apple ID

    Tried an android phone for 3 days and Apple removed my phone/number from my Apple ID account. Now I'm back with the iPhone and I can't link to my Apple ID. How do I re-connect?

  • Labview program to unistall and install new/updated software programatically

    Hi,  I want to create a labview program to install and uninstall teststand deployment programatically. Query : I have teststand deployment made and ready,wanted to deploy in 5 test PC's and for very first time it did work good. Now when I made update

  • Procedure that just won't work (newbie)

    CREATE OR REPLACE PROCEDURE NODB_LOAD AS -------------Declare neede variables--------- t_schedule_number; t_month; t_year; prev_schedule_number; differencetable = Dt; rowcount = 0; DECLARE TYPE nodb_cur IS REF CURSOR RETURN joltsdata%ROWTYPE BEGIN OP

  • Export Database in 9i

    Hi there, I want to know if there is any way to scheduale ana automatic export for a specific user, and if there is a way for that, how can i do this? Please be specific. Thanks in advance.