Nokia 301 won't start up

When I switch my Nokia 301 off, it won't start up again.
To get it to start, I have to remove the battery for more than 10 minutes, plug it into a charger for an hour or so, and then it will start up.
If I try to turn it on soon after plugging the charger in, the screen flashes brightly and then switches off, and I have to start again by taking the battery out.
Could this be solved with a new battery, or resetting or reflashing the phone, or is there something more serious wrong with the electronics?

Welcome to Nokia Discussions, glastounok.
This might be a hardware issue. You may send it to a Nokia Care Centre for further device diagnostics.
Nokia Care Point locator can be found at http://www.nokia.com/global/support
Good luck

Similar Messages

  • Nokia 301 won't remember time settings

    Last year my provider provided me with this phone, but I only started to use it this weekend. Normally, when you use a new phone, you set the time once and then it'll remember it, not this one.
    There's an option for "automatic time updating" (which has more to do with daylight saving I assumed), but when that option is not turned to on, the phone stays on the time I set once. When this option is turned on, it sometimes updates. Sometimes not. 
    I'm not into apping and internet stuff, but I accidentally clicked a shop sign and it won't even let me get on, because my time setting is not up to date. Also, received and outgoing calls are mentioned (also unanswered ones), but without date & time.
    Is this just me or a known possible mistake? Even more important for me at this time, can it be fixed? Thanks in advance for your help!
    Edit: More info, I'm in Hungary, Telenor is my provider and the firmware is: 2.51 (07-06-13), RM-840
    I tried updating, but I get the message that there's no update available.

    Right now I check my phone, it's 20:01 for real, phone says 19:10. Last time I checked the phone was about 2 hours ago when I tried to call someone, somehow it just seems to "stand still" when not being used for some time?! Every morning it's also 2 or 3 hours behind, but when I have the "automatic update" option on, it sometimes does update after a while, or after I use it.
    *#0000#
    Nokia 301.1
    V 02.51
    07-06-13
    RM-840
    (c) Nokia
    Variant: 376.02
    Virtual Variant: No Virtual Variant
    Language:
    V 02.51
    07-06-13
    (c) Nokia
    E3
    *#0010#
    Is what I typed in the post before, starting with Content Telenor Hungary.
    I appreciate that you're trying to help me!

  • Nokia 6288 won't start

    Hello,
    During updating my phones software by using NSU i got a warning the connection between phone and pc was lost so te update was not finished. Now my 6288 won't start anymore. Does anybody know how to solve this?

    This is true, the phone has completely crashed and only an engineer can now get this working.
    You can find the nearest NCP to you at the Store Locator
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • Nokia 700 - won't start after FP1 update (112.some...

    Just checked for updates today and I had a new OTA update available, yay! So I thought, "Finally, FP1 is here!" Here's what happened afterwards:
    I charged my 700, created a back-up (never forget this step chaps), restarted it, took a deep breath, enabled Wi-Fi and let it update itself.
    So first step went fine, it downloaded the update. Second, it rebooted and started loading the update files while displaying "Updating..." Next, it switched the label to a coups of gears and continued filling the progress bar. And then - the moment of truth - reboot.
    Started initialising normally, then showed NOKIA logo, started the "Loading" animation with the five dots and... that was it. It keeps resetting while at the dots animation. After several tries it just gave up and remained blank. Waited some time and decided to wake it up - same scenario: starts init, several reboots, goes back to off.
    Is it that the OTA SW updated screwed up my device? Really hope not!
    Any words of advice from the community here before I go yell at somebody at one of my carrier's offices tomorrow morning?
    Cheers!

    Brief update - turns the phone is not "bricked" at all, problem is my SIM card.
    It's ancient honestly but should that render the phone useless?
    In short - tried booting without SIM at all - works OK. Tried with relatively recent SIM - OK. When tried with my old SIM (think I got it as a replacement to an even older price back in 1999 or 2000) - boom! Won't power up (keeps rebooting till it gives up at some point).
    Although I'll easily remedy it by getting a new chip in the morning, I was wondering - is Belle FP1 not supporting old SIM cards?

  • Nokia 5800 won't start up three weeks after slight...

    okay, here's kind of a long one.. I bought my nokia 5800 xpressmusic on a £5 a month contract with the catalogue 'Very'.. Apparently this does not include insurance.. Anyway.. the phone worked perfectly for a year.. until i went to the beach and dropped it in a shallow puddle face down.. slowly everything went off... so i took  the battery, sim and memory card out.. a day later it came back on.. it's worked fine for three weeks (apart from the lights on the buttons and the secondary camera on the front).. but last night.. i was on my normal apps when the screen closed down, went black and the backlight was on low.. i tried taking the battery, sim and memory card out and put them back in.. but to no avail.. also I've tried it on charge and tried with a sim without, with memory card without etc.. but nothing seems to be working... this kind of thing has happened before but it came on after a few hours.. but it's been 12 hours.. and i haven't had any luck with it.. i could really use the help because i'm not even half way through my contract with 'Very' and they won't let me cancel it and they won't replace it... Also no message came up after the phone turned off..
    The fact it crashed while i was on apps after it had worked for three weeks after the water accident makes me think it's probably not due to the slight water damage... can you help please?

    serebro_ru wrote:
    The fact it crashed while i was on apps after it had worked for three weeks after the water accident makes me think it's probably not due to the slight water damage... can you help please?
    Don't know why you assume this especially due to corrosive nature of saline as opposed to fresh water; it takes a while for faults to start showing up after such immersion unfortunately.
    Happy to have helped forum with a Support Ratio = 42.5

  • Nokia C7 won't start anymore

    Hi all!
    To briefly describe the problem:
    - bought the phone 5 days ago; tried it to see how it works- installed PR1.2 as an update throgh phone's update function to have the latest software available;
    - 3 days ago it suddenly stopped; It started again after five minutes (meanwhile I couldn't make it start whatsoever);
    - yesterday while transfering a picture through OVI to the computer, the phone closed; I couldn't make it work again; I searched the internet and the only thing that worked was to leave the phone in the fridge for 5 minutes and then turn it on but it only works for some time then closes again;
    From what I see in the other threads, this is a common problem. Is there any proper workaround available or the only solution is to get it back to the the store I bought it and hope they'll replace the motherboard? Is there anywhere any information regarding the source of the problem? (I read it's probable to be a sensor of heat)

    Hello,
    Regardless the reason what’s causing this issue and whether your phone
    temporarily wakes up after being in fridge, the fact is that your new phone
    isn’t working as it should. For that phone needs to be either checked by Nokia
    Care point and then repaired or swapped by the retailer. As phone is brand new,
    warranty naturally covers the costs.
    Putting the phone into fridge for a while obviously isn’t a solution and if
    done frequently, may even damage the phone more, as rapid temperature changes
    cause air humidity condensing inside the device. Also opening the phone and
    trying to repair according to some instructions found from internet causes the
    warranty to expire, so I definitely wouldn’t recommend that either.

  • Nokia C5 won't start

    I have a recently purchased Nokia C5 that in mid conversation just died. No warningsignals or anything, it just died. Every time I start the phone it buzzez (vibrates) but not like it usually does, just a sort of warningbuzz or something and nothing happens. I tried charging it, thinking it may be the battery, but an hour later nothing has changed. It doesn't even show that it is recharging. I've tried taking out the battery, taking out the simcard, taking out the microsd and all at the same time - Nothing! 
    What the h*ll is wrong with my phone?!

    Next thing to try is a Hard Reset:
    Press and hold these three buttons * + 3 + Green call button. now push the power on. keep those buttons pressed, until you see timezone selection screen.
    (Buttons to hold are STAR, THREE, GREEN CALL BUTTON)
    After doing this unfortunately you'll loose you data from phone memory, and it'll be in out of box condition.
    And if Hard Reset fails, next thing is to visit your local Nokia Care point and let them fix it for you.
    http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • Nokia 301 settings won't affect

    I have problem with my new Nokia 301. Software version is 8.02.
    When I modify settings, for example "device settings-> help text activation" or "Start-up tone" it always turns on itself after I have turned them off and close the menu.
    Also, when I set "Display settings->Notification details" to "Show", it won't show the notifications. For two days they showed but magically disappeared and won't come back again.
    Same problem with setting for dataconnection, it is always online even if I set  "Packet data connection" to "When needed".
    Changing settings won't affect at all. Is there something wrong with phone memory or is this common problem with this software?

    Abi99 wrote:
    akyttala wrote:
    dataconnection is always online even if I set  "Packet data connection" to "When needed".
    Single SIM? Does this help? Do you use WhatsApp, IMAP or Exchange?
    Single SIM. It won't help, as settings changes themselves, sometimes right away, sometimes after few hours. I found that there is setting to disable mobile data connection entirely, but it also changes itself back on for a while.
    I don't use Whatsapp, IMAP or Exchange.

  • Nokia 301 dead after software update

    I just updated my Nokia 301 from its software version 2.something to the latest (8.03 I believe). After the update process the phone is dead. It won't start up, nothing.
    Is there anything I can do?

    Beck_DK:
    we are investigating your report about Mail for Exchange.
    pbomta:
    Nokia 301 does not support SW updates via Nokia Suite (like all the more recent phones), so that would be the expected result.  
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • X11 won't start (sets monitor to standby) with nVidia card

    Hello everyone!
    I'm having some trouble getting my computer to work properly. Yesterday it was working perfectly, but today it would't start again. After some troubleshooting I've determined that the problem lies with X11 and the graphics driver. The bootloader, grub, and arch itself, boots perfectly in runlevel 3, but the moment you run "startx" it would appear to be loading for a while and finally the screen goes to standby mode and there is no way out of that other than reseting the computer using the reset button. I've tried uninstalling the nvidia drivers and installing nouveau drivers, but it still won't start X, this time arround, it would just hang up with a white screen.
    I've also tried removing xorg.conf and also using nvidia utility to generate a new one, but neither seems to work.
    /var/log/Xorg.0.log doesn't report any errors, it just gives different info from the configuration and the graphics card and just ends there.
    I've tried booting with a debian live USB but it would't boot either (the computer would just restart). I've also tried a Kubuntu live USB, this time arround, it would start to boot but the graphics appeared to be corrupted (strange colored noise all over the screen) and eventually it would just hang up. Using nomodeset Kubuntu finally booted (using vesa I guess?), but the same didn't work in Arch (I'm guessing because I have the nvidia drivers installed instead of nouveau).
    In conclussion, something appears to be wrong with the graphics card, I dont't know if it's a software problem or a hardware problem, as it started from one day to the other, without any upgrades in between, and it just doesn't work in any of the 3 distributions I've tested.
    Any suggestions in what to do to troubleshoot this?
    Thanks in advance,
    Santiago.-

    Xorg.0.log
    [ 35.560]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 35.560] X Protocol Version 11, Revision 0
    [ 35.560] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 35.561] Current Operating System: Linux arch 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
    [ 35.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    [ 35.562] Build Date: 01 November 2013 05:10:48PM
    [ 35.562]
    [ 35.562] Current version of pixman: 0.30.2
    [ 35.562] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 35.562] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 35.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 4 21:35:07 2013
    [ 35.576] (==) Using config file: "/etc/X11/xorg.conf"
    [ 35.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 35.577] (==) ServerLayout "Layout0"
    [ 35.577] (**) |-->Screen "Screen0" (0)
    [ 35.577] (**) | |-->Monitor "Monitor0"
    [ 35.577] (**) | |-->Device "Device0"
    [ 35.577] (**) |-->Input Device "Keyboard0"
    [ 35.577] (**) |-->Input Device "Mouse0"
    [ 35.577] (==) Automatically adding devices
    [ 35.577] (==) Automatically enabling devices
    [ 35.577] (==) Automatically adding GPU devices
    [ 35.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 35.603] Entry deleted from font path.
    [ 35.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 35.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 35.604] Entry deleted from font path.
    [ 35.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 35.604] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 35.604] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 35.604] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 35.604] (WW) Disabling Keyboard0
    [ 35.604] (WW) Disabling Mouse0
    [ 35.604] (II) Loader magic: 0x7fdc20
    [ 35.604] (II) Module ABI versions:
    [ 35.604] X.Org ANSI C Emulation: 0.4
    [ 35.604] X.Org Video Driver: 14.1
    [ 35.604] X.Org XInput driver : 19.1
    [ 35.604] X.Org Server Extension : 7.0
    [ 35.604] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 35.605] (--) PCI:*(0:1:0:0) 10de:0421:1682:2353 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
    [ 35.606] Initializing built-in extension Generic Event Extension
    [ 35.606] Initializing built-in extension SHAPE
    [ 35.606] Initializing built-in extension MIT-SHM
    [ 35.606] Initializing built-in extension XInputExtension
    [ 35.606] Initializing built-in extension XTEST
    [ 35.607] Initializing built-in extension BIG-REQUESTS
    [ 35.607] Initializing built-in extension SYNC
    [ 35.607] Initializing built-in extension XKEYBOARD
    [ 35.607] Initializing built-in extension XC-MISC
    [ 35.608] Initializing built-in extension SECURITY
    [ 35.608] Initializing built-in extension XINERAMA
    [ 35.608] Initializing built-in extension XFIXES
    [ 35.608] Initializing built-in extension RENDER
    [ 35.608] Initializing built-in extension RANDR
    [ 35.609] Initializing built-in extension COMPOSITE
    [ 35.609] Initializing built-in extension DAMAGE
    [ 35.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 35.609] Initializing built-in extension DOUBLE-BUFFER
    [ 35.619] Initializing built-in extension RECORD
    [ 35.629] Initializing built-in extension DPMS
    [ 35.638] Initializing built-in extension X-Resource
    [ 35.647] Initializing built-in extension XVideo
    [ 35.656] Initializing built-in extension XVideo-MotionCompensation
    [ 35.665] Initializing built-in extension XFree86-VidModeExtension
    [ 35.673] Initializing built-in extension XFree86-DGA
    [ 35.682] Initializing built-in extension XFree86-DRI
    [ 35.690] Initializing built-in extension DRI2
    [ 35.690] (II) LoadModule: "glx"
    [ 35.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 36.111] (II) Module glx: vendor="NVIDIA Corporation"
    [ 36.111] compiled for 4.0.2, module version = 1.0.0
    [ 36.111] Module class: X.Org Server Extension
    [ 36.111] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 36.126] Loading extension GLX
    [ 36.126] (II) LoadModule: "nvidia"
    [ 36.136] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 36.195] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 36.195] compiled for 4.0.2, module version = 1.0.0
    [ 36.195] Module class: X.Org Video Driver
    [ 36.197] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 36.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 36.197] (--) using VT number 2
    [ 36.248] (II) Loading sub module "fb"
    [ 36.248] (II) LoadModule: "fb"
    [ 36.259] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 36.270] (II) Module fb: vendor="X.Org Foundation"
    [ 36.270] compiled for 1.14.4, module version = 1.0.0
    [ 36.270] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.270] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 36.270] (II) Loading sub module "wfb"
    [ 36.270] (II) LoadModule: "wfb"
    [ 36.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 36.271] (II) Module wfb: vendor="X.Org Foundation"
    [ 36.271] compiled for 1.14.4, module version = 1.0.0
    [ 36.271] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.271] (II) Loading sub module "shadow"
    [ 36.271] (II) LoadModule: "shadow"
    [ 36.271] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 36.272] (II) Module shadow: vendor="X.Org Foundation"
    [ 36.272] compiled for 1.14.4, module version = 1.1.0
    [ 36.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.272] (II) Loading sub module "ramdac"
    [ 36.272] (II) LoadModule: "ramdac"
    [ 36.272] (II) Module "ramdac" already built-in
    [ 36.274] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 36.274] (==) NVIDIA(0): RGB weight 888
    [ 36.274] (==) NVIDIA(0): Default visual is TrueColor
    [ 36.274] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 36.274] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 36.274] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 36.274] (**) NVIDIA(0): Enabling 2D acceleration
    [ 50.151] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 50.256] (II) NVIDIA(GPU-0): Display (Samsung SMB2330H (CRT-0)) does not support NVIDIA 3D
    [ 50.256] (II) NVIDIA(GPU-0): Vision stereo.
    [ 50.256] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
    [ 50.256] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 50.256] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.85
    [ 50.256] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    journalctl -xb
    -- Logs begin at Sat 2013-08-17 21:55:41 ART, end at Mon 2013-11-04 22:01:35 ART. --
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 364.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 368.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuset
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpu
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuacct
    Nov 04 21:59:09 arch kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    Nov 04 21:59:09 arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: e820: BIOS-provided physical RAM map:
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007fbb4fff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbb5000-0x000000007fbf7fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbf8000-0x000000007fd4bfff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd4c000-0x000000007fd51fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd52000-0x000000007fd52fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd53000-0x000000007fd54fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd55000-0x000000007fd56fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd57000-0x000000007fd57fff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd58000-0x000000007fd5bfff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd5c000-0x000000007fd6afff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd6b000-0x000000007fefffff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    Nov 04 21:59:09 arch kernel: NX (Execute Disable) protection: active
    Nov 04 21:59:09 arch kernel: SMBIOS 2.4 present.
    Nov 04 21:59:09 arch kernel: DMI: /DG31PR, BIOS PRG3110H.86A.0071.2010.0318.1704 03/18/2010
    Nov 04 21:59:09 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Nov 04 21:59:09 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    Nov 04 21:59:09 arch kernel: MTRR default type: uncachable
    Nov 04 21:59:09 arch kernel: MTRR fixed ranges enabled:
    Nov 04 21:59:09 arch kernel: 00000-9FFFF write-back
    Nov 04 21:59:09 arch kernel: A0000-E7FFF uncachable
    Nov 04 21:59:09 arch kernel: E8000-FFFFF write-protect
    Nov 04 21:59:09 arch kernel: MTRR variable ranges enabled:
    Nov 04 21:59:09 arch kernel: 0 base 000000000 mask F80000000 write-back
    Nov 04 21:59:09 arch kernel: 1 base 07FF00000 mask FFFF00000 uncachable
    Nov 04 21:59:09 arch kernel: 2 disabled
    Nov 04 21:59:09 arch kernel: 3 disabled
    Nov 04 21:59:09 arch kernel: 4 disabled
    Nov 04 21:59:09 arch kernel: 5 disabled
    Nov 04 21:59:09 arch kernel: 6 disabled
    Nov 04 21:59:09 arch kernel: 7 disabled
    Nov 04 21:59:09 arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Nov 04 21:59:09 arch kernel: found SMP MP-table at [mem 0x000fc620-0x000fc62f] mapped at [ffff8800000fc620]
    Nov 04 21:59:09 arch kernel: Scanning 1 areas for low memory corruption
    Nov 04 21:59:09 arch kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00000000-0x000fffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7f800000-0x7f9fffff] page 2M
    Nov 04 21:59:09 arch kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7c000000-0x7f7fffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00100000-0x001fffff] page 4k
    Nov 04 21:59:09 arch kernel: [mem 0x00200000-0x7bffffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fa00000-0x7fbb4fff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fd6b000-0x7fefffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
    Nov 04 21:59:09 arch kernel: RAMDISK: [mem 0x37a14000-0x37d01fff]
    Nov 04 21:59:09 arch kernel: ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL)
    Nov 04 21:59:09 arch kernel: ACPI: XSDT 000000007fd53f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: FACP 000000007fd51d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
    Nov 04 21:59:09 arch kernel: ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7FD56F40/0x000000007FD52F40, using 32 (20130517/tbfadt-522)
    Nov 04 21:59:09 arch kernel: ACPI: DSDT 000000007fd4c010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117)
    Nov 04 21:59:09 arch kernel: ACPI: FACS 000000007fd56f40 00040
    Nov 04 21:59:09 arch kernel: ACPI: APIC 000000007fd51f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: HPET 000000007fd5ad10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
    Nov 04 21:59:09 arch kernel: ACPI: MCFG 000000007fd5ac10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: No NUMA configuration found
    Nov 04 21:59:09 arch kernel: Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    Nov 04 21:59:09 arch kernel: Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: NODE_DATA [mem 0x7fefb000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
    Nov 04 21:59:09 arch kernel: Zone ranges:
    Nov 04 21:59:09 arch kernel: DMA [mem 0x00001000-0x00ffffff]
    Nov 04 21:59:09 arch kernel: DMA32 [mem 0x01000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: Normal empty
    Nov 04 21:59:09 arch kernel: Movable zone start for each node
    Nov 04 21:59:09 arch kernel: Early memory node ranges
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00001000-0x0009efff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00100000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: On node 0 totalpages: 523496
    Nov 04 21:59:09 arch kernel: DMA zone: 64 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA zone: 21 pages reserved
    Nov 04 21:59:09 arch kernel: DMA zone: 3998 pages, LIFO batch:0
    Nov 04 21:59:09 arch kernel: DMA32 zone: 8124 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA32 zone: 519498 pages, LIFO batch:31
    Nov 04 21:59:09 arch kernel: ACPI: PM-Timer IO Port: 0x408
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    Nov 04 21:59:09 arch kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Nov 04 21:59:09 arch kernel: ACPI: IRQ0 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ2 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ9 used by override.
    Nov 04 21:59:09 arch kernel: Using ACPI (MADT) for SMP configuration information
    Nov 04 21:59:09 arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Nov 04 21:59:09 arch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    Nov 04 21:59:09 arch kernel: nr_irqs_gsi: 40
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbb5000-0x7fbf7fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbf8000-0x7fd4bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd4c000-0x7fd51fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd52000-0x7fd52fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd53000-0x7fd54fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd55000-0x7fd56fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd57000-0x7fd57fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd58000-0x7fd5bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd5c000-0x7fd6afff]
    Nov 04 21:59:09 arch kernel: e820: [mem 0x7ff00000-0xfed1bfff] available for PCI devices
    Nov 04 21:59:09 arch kernel: Booting paravirtualized kernel on bare hardware
    Nov 04 21:59:09 arch kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Nov 04 21:59:09 arch kernel: PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86528 r8192 d24064 u524288
    Nov 04 21:59:09 arch kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
    Nov 04 21:59:09 arch kernel: pcpu-alloc: [0] 0 1 2 3
    Nov 04 21:59:09 arch kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515287
    Nov 04 21:59:09 arch kernel: Policy zone: DMA32
    Nov 04 21:59:09 arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: Checking aperture...
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: Calgary: detecting Calgary via BIOS EBDA area
    Nov 04 21:59:09 arch kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Nov 04 21:59:09 arch kernel: Memory: 2045916K/2093984K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 48068K reserved)
    Nov 04 21:59:09 arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Nov 04 21:59:09 arch kernel: Preemptible hierarchical RCU implementation.
    Nov 04 21:59:09 arch kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Nov 04 21:59:09 arch kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Nov 04 21:59:09 arch kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Nov 04 21:59:09 arch kernel: NR_IRQS:8448 nr_irqs:712 16
    Nov 04 21:59:09 arch kernel: Console: colour dummy device 80x25
    Nov 04 21:59:09 arch kernel: console [tty0] enabled
    Nov 04 21:59:09 arch kernel: allocated 8388608 bytes of page_cgroup
    Nov 04 21:59:09 arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Nov 04 21:59:09 arch kernel: hpet clockevent registered
    Nov 04 21:59:09 arch kernel: tsc: Fast TSC calibration using PIT
    Nov 04 21:59:09 arch kernel: tsc: Detected 2399.803 MHz processor
    Nov 04 21:59:09 arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.58 BogoMIPS (lpj=7999343)
    Nov 04 21:59:09 arch kernel: pid_max: default: 32768 minimum: 301
    Nov 04 21:59:09 arch kernel: Security Framework initialized
    Nov 04 21:59:09 arch kernel: AppArmor: AppArmor disabled by boot time parameter
    Nov 04 21:59:09 arch kernel: Yama: becoming mindful.
    Nov 04 21:59:09 arch kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Nov 04 21:59:09 arch kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Nov 04 21:59:09 arch kernel: Mount-cache hash table entries: 256
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys memory
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys devices
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys freezer
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys net_cls
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys blkio
    Nov 04 21:59:09 arch kernel: CPU: Physical Processor ID: 0
    Nov 04 21:59:09 arch kernel: CPU: Processor Core ID: 0
    Nov 04 21:59:09 arch kernel: mce: CPU supports 6 MCE banks
    Nov 04 21:59:09 arch kernel: CPU0: Thermal monitoring enabled (TM2)
    Nov 04 21:59:09 arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    Nov 04 21:59:09 arch kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    Nov 04 21:59:09 arch kernel: ACPI: Core revision 20130517
    Nov 04 21:59:09 arch kernel: ACPI: All ACPI Tables successfully acquired
    Nov 04 21:59:09 arch kernel: ftrace: allocating 20100 entries in 79 pages
    Nov 04 21:59:09 arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Nov 04 21:59:09 arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
    Nov 04 21:59:09 arch kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    Nov 04 21:59:09 arch kernel: perf_event_intel: PEBS disabled due to CPU errata
    Nov 04 21:59:09 arch kernel: ... version: 2
    Nov 04 21:59:09 arch kernel: ... bit width: 40
    Nov 04 21:59:09 arch kernel: ... generic registers: 2
    Nov 04 21:59:09 arch kernel: ... value mask: 000000ffffffffff
    Nov 04 21:59:09 arch kernel: ... max period: 000000007fffffff
    Nov 04 21:59:09 arch kernel: ... fixed-purpose events: 3
    Nov 04 21:59:09 arch kernel: ... event mask: 0000000700000003
    Nov 04 21:59:09 arch kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Nov 04 21:59:09 arch kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
    Nov 04 21:59:09 arch kernel: Brought up 4 CPUs
    Nov 04 21:59:09 arch kernel: smpboot: Total of 4 processors activated (19206.35 BogoMIPS)
    Nov 04 21:59:09 arch kernel: devtmpfs: initialized
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fbb5000-0x7fbf7fff] (274432 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd52000-0x7fd52fff] (4096 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd55000-0x7fd56fff] (8192 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd58000-0x7fd5bfff] (16384 bytes)
    Nov 04 21:59:09 arch kernel: RTC time: 0:59:05, date: 11/05/13
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 16
    Nov 04 21:59:09 arch kernel: ACPI: bus type PCI registered
    Nov 04 21:59:09 arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: not using MMCONFIG
    Nov 04 21:59:09 arch kernel: PCI: Using configuration type 1 for base access
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: probably your BIOS does not setup all CPUs.
    Nov 04 21:59:09 arch kernel: mtrr: corrected configuration.
    Nov 04 21:59:09 arch kernel: bio: create slab <bio-0> at 0
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Module Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Nov 04 21:59:09 arch kernel: ACPI: EC: Look up EC in DSDT
    Nov 04 21:59:09 arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Nov 04 21:59:09 arch kernel: ACPI: SSDT 000000007fd56c10 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Dynamic OEM Table Load:
    Nov 04 21:59:09 arch kernel: ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Interpreter enabled
    Nov 04 21:59:09 arch kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    Nov 04 21:59:09 arch kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Nov 04 21:59:09 arch kernel: ACPI: Using IOAPIC for interrupt routing
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
    Nov 04 21:59:09 arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Nov 04 21:59:09 arch kernel: ACPI: No dock devices found.
    Nov 04 21:59:09 arch kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Nov 04 21:59:09 arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
    Nov 04 21:59:09 arch kernel: PCI host bridge to bus 0000:00
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x10: [io 0xf130-0xf137]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x14: [io 0xf120-0xf123]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x18: [io 0xf110-0xf117]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x1c: [io 0xf100-0xf103]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x18: [mem 0xfb120000-0xfb120fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: supports D1 D2
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
    Nov 04 21:59:09 arch kernel: ACPI: \_SB_.PCI0: notify handler is installed
    Nov 04 21:59:09 arch kernel: Found 1 acpi root devices
    Nov 04 21:59:09 arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Nov 04 21:59:09 arch kernel: vgaarb: loaded
    Nov 04 21:59:09 arch kernel: vgaarb: bridge control possible 0000:01:00.0
    Nov 04 21:59:09 arch kernel: PCI: Using ACPI for IRQ routing
    Nov 04 21:59:09 arch kernel: PCI: pci_cache_line_size set to 64 bytes
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7fbb5000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: NetLabel: Initializing
    Nov 04 21:59:09 arch kernel: NetLabel: domain hash size = 128
    Nov 04 21:59:09 arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Nov 04 21:59:09 arch kernel: NetLabel: unlabeled traffic allowed by default
    Nov 04 21:59:09 arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Nov 04 21:59:09 arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Nov 04 21:59:09 arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Nov 04 21:59:09 arch kernel: Switched to clocksource hpet
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI init
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP registered
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0400-0x047f] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x1180-0x119f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0500-0x053f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffb00000-0xffcfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfc800000-0xfc800fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed20000-0xfed7ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:02: [io 0x0290-0x029f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:04: [dma 2]
    Nov 04 21:59:09 arch kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:05: [dma 0 disabled]
    Nov 04 21:59:09 arch kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:06: [dma 4]
    Nov 04 21:59:09 arch kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
    Nov 04 21:59:09 arch kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI: found 12 devices
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP unregistered
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 2
    Nov 04 21:59:09 arch kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP: Hash tables configured (established 16384 bind 16384)
    Nov 04 21:59:09 arch kernel: TCP: reno registered
    Nov 04 21:59:09 arch kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 1
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Boot video device
    Nov 04 21:59:09 arch kernel: PCI: CLS 64 bytes, default 64
    Nov 04 21:59:09 arch kernel: Unpacking initramfs...
    Nov 04 21:59:09 arch kernel: Freeing initrd memory: 3000K (ffff880037a14000 - ffff880037d02000)
    Nov 04 21:59:09 arch kernel: Scanning for low memory corruption every 60 seconds
    Nov 04 21:59:09 arch kernel: audit: initializing netlink socket (disabled)
    Nov 04 21:59:09 arch kernel: type=2000 audit(1383613146.559:1): initialized
    Nov 04 21:59:09 arch kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Nov 04 21:59:09 arch kernel: zbud: loaded
    Nov 04 21:59:09 arch kernel: VFS: Disk quotas dquot_6.5.2
    Nov 04 21:59:09 arch kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Nov 04 21:59:09 arch kernel: msgmni has been set to 4001
    Nov 04 21:59:09 arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Nov 04 21:59:09 arch kernel: io scheduler noop registered
    Nov 04 21:59:09 arch kernel: io scheduler deadline registered
    Nov 04 21:59:09 arch kernel: io scheduler cfq registered (default)
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Nov 04 21:59:09 arch kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
    Nov 04 21:59:09 arch kernel: vesafb: scrolling: redraw
    Nov 04 21:59:09 arch kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Nov 04 21:59:09 arch kernel: vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90002400000, using 1216k, total 1216k
    Nov 04 21:59:09 arch kernel: Console: switching to colour frame buffer device 80x30
    Nov 04 21:59:09 arch kernel: fb0: VESA VGA frame buffer device
    Nov 04 21:59:09 arch kernel: intel_idle: does not run on family 6 model 15
    Nov 04 21:59:09 arch kernel: GHES: HEST is not enabled!
    Nov 04 21:59:09 arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Nov 04 21:59:09 arch kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Nov 04 21:59:09 arch kernel: Linux agpgart interface v0.103
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
    Nov 04 21:59:09 arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Nov 04 21:59:09 arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: mousedev: PS/2 mouse device common for all mice
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: RTC can wake from S4
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    Nov 04 21:59:09 arch kernel: cpuidle: using governor ladder
    Nov 04 21:59:09 arch kernel: cpuidle: using governor menu
    Nov 04 21:59:09 arch kernel: drop_monitor: Initializing network drop monitor service
    Nov 04 21:59:09 arch kernel: TCP: cubic registered
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 10
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 17
    Nov 04 21:59:09 arch kernel: Key type dns_resolver registered
    Nov 04 21:59:09 arch kernel: PM: Hibernation image not present or could not be loaded.
    Nov 04 21:59:09 arch kernel: registered taskstats version 1
    Nov 04 21:59:09 arch kernel: Magic number: 5:843:960
    Nov 04 21:59:09 arch kernel: memory memory11: hash matches
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: setting system clock to 2013-11-05 00:59:07 UTC (1383613147)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    Nov 04 21:59:09 arch kernel: Write protecting the kernel read-only data: 8192k
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
    Nov 04 21:59:09 arch systemd-udevd[58]: starting version 208
    Nov 04 21:59:09 arch kernel: Floppy drive(s): fd0 is 1.44M
    Nov 04 21:59:09 arch kernel: SCSI subsystem initialized
    Nov 04 21:59:09 arch kernel: ACPI: bus type USB registered
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver usbfs
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver hub
    Nov 04 21:59:09 arch kernel: usbcore: registered new device driver usb
    Nov 04 21:59:09 arch kernel: ACPI: bus type ATA registered
    Nov 04 21:59:09 arch kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Nov 04 21:59:09 arch kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Nov 04 21:59:09 arch kernel: libata version 3.00 loaded.
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
    Nov 04 21:59:09 arch kernel: ehci-pci: EHCI PCI platform driver
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
    Nov 04 21:59:09 arch kernel: FDC 0 is a post-1991 82077
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: version 2.13
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: scsi0 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi1 : ata_piix
    Nov 04 21:59:09 arch kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
    Nov 04 21:59:09 arch kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: MAP [
    Nov 04 21:59:09 arch kernel: P0 P2 P1 P3 ]
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ata2: port disabled--ignoring
    Nov 04 21:59:09 arch kernel: scsi2 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi3 : ata_piix
    Nov 04 21:59:09 arch kernel: ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
    Nov 04 21:59:09 arch kernel: ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: debug port 1
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: 8 ports detected
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata4.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
    Nov 04 21:59:09 arch kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Nov 04 21:59:09 arch kernel: ata4.00: configured for UDMA/133
    Nov 04 21:59:09 arch kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write Protect is off
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Nov 04 21:59:09 arch kernel: sda: sda1 sda2 sda3 sda4 sda5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Attached SCSI disk
    Nov 04 21:59:09 arch kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Nov 04 21:59:09 arch kernel: tsc: Refined TSC clocksource calibration: 2399.950 MHz
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Nov 04 21:59:09 arch systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Nov 04 21:59:09 arch systemd[1]: Set hostname to <arch>.
    Nov 04 21:59:09 arch kernel: Switched to clocksource tsc
    Nov 04 21:59:09 arch systemd[1]: Failed to load default target: No such file or directory
    Nov 04 21:59:09 arch systemd[1]: Trying to load rescue target...
    Nov 04 21:59:09 arch systemd[1]: Starting Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Reached target Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Listening on Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Starting Setup Virtual Console...
    Nov 04 21:59:09 arch systemd[1]: Starting Apply Kernel Variables...
    Nov 04 21:59:09 arch systemd[1]: Started Set Up Additional Binary Formats.
    Nov 04 21:59:09 arch systemd[1]: Started Load Kernel Modules.
    Nov 04 21:59:09 arch systemd[1]: Mounted FUSE Control File System.
    Nov 04 21:59:09 arch systemd[1]: Mounting POSIX Message Queue File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Huge Pages File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Configuration File System...
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Service...
    Nov 04 21:59:09 arch systemd[1]: Started Journal Service.
    Nov 04 21:59:09 arch systemd-journal[120]: Journal started
    -- Subject: The Journal has been started
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The system journal process has been starting up, opened the journal
    -- files for writing and is now ready to process requests.
    Nov 04 21:59:09 arch systemd[1]: Starting Create list of required static device nodes for the current kernel...
    -- Subject: Unit kmod-static-nodes.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Coldplug all Devices...
    -- Subject: Unit systemd-udev-trigger.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Debug File System...
    -- Subject: Unit sys-kernel-debug.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-sda4.device...
    -- Subject: Unit dev-sda4.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-sda4.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device...
    -- Subject: Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Temporary Directory...
    -- Subject: Unit tmp.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started File System Check on Root Device.
    -- Subject: Unit systemd-fsck-root.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-fsck-root.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Remount Root and Kernel File Systems...
    -- Subject: Unit systemd-remount-fs.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting Root Slice.
    -- Subject: Unit -.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice Root Slice.
    -- Subject: Unit -.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting System Slice.
    -- Subject: Unit system.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice System Slice.
    -- Subject: Unit system.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device...
    -- Subject: Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Apply Kernel Variables.
    -- Subject: Unit systemd-sysctl.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-sysctl.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted POSIX Message Queue File System.
    -- Subject: Unit dev-mqueue.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-mqueue.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Huge Pages File System.
    -- Subject: Unit dev-hugepages.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-hugepages.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Configuration File System.
    -- Subject: Unit sys-kernel-config.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-config.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Debug File System.
    -- Subject: Unit sys-kernel-debug.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Temporary Directory.
    -- Subject: Unit tmp.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create list of required static device nodes for the current kernel.
    -- Subject: Unit kmod-static-nodes.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started udev Coldplug all Devices.
    -- Subject: Unit systemd-udev-trigger.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Create static device nodes in /dev...
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Remount Root and Kernel File Systems.
    -- Subject: Unit systemd-remount-fs.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Load/Save Random Seed...
    -- Subject: Unit systemd-random-seed.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has begun starting up.
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Nov 04 21:59:09 arch systemd[1]: Started Load/Save Random Seed.
    -- Subject: Unit systemd-random-seed.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create static device nodes in /dev.
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mail

  • Nokia 301 app store problems

    I have a problem with the Nokia Store app in my Nokia 301 (single SIM) RM-841 v.8.02 S40 phone. It's an unlocked phone.
    I opened the store app and it said there was a required update. I said yes and it updated. However, after that, the Nokia Store app doesn't work properly and hangs, and it also displays the icon with a key over it. The Nokia internet doesn't work properly either after the store app update.
    I tried to use the recovery tool wich I downloaded from Microsoft. I installed it, connected the phone with the appropiate USB cable, followed the instructions. The recovery tool detected my phone but after that, it just doesn't seem to work and it says installation failed and gets stuck at 10%.
    What can I do to solve and/or fix the issue to be able to use the Nokia Store app again and the Nokia internet browser.
    I have Windows 7 of 64bit.
    Can anyone help me?

    On the first (differ), you have to say YES, or the download does not work.
    On the second (keep), depends on the app. However, I go for NO usually.
    The built-in apps do not have the download URL embedded, when you first update. Furthermore, even the next updates are going to show that warning because the webserver scripts redirect while updating. Therefore, this message. Botching. This is actually a software-bug in the app and webserver scripts. With one experienced computer scientist, this would not have happened.
    If you do not keep the data, you start all over – except for apps which store your data online, like the Nokia Store. If you start over, you make sure, you do not have RMS with unexpected settings. This is important, if you used an already updated app, which FOTA downgrades. Because you do not know, if FOTA downgraded an app, NO is the safe way. We saw that with Nokia Xpress on some models. Anyway, again, a software-bug because apps can be designed to handle unknown/future settings easily. Botching.

  • Microsoft Forefront Server Protection Eventing Service won't start?

    Hi Guys,
    When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
    we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
    Event 465
    Source: ESENT
    FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
    fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
    Event 301
    Source: ESENT
    FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
    Event 454
    Source: ESENT
    FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
    Event 1076
    Source: FSCEventing
    The Forefront Protection Eventing Service has stopped.
    Thank you very much!
    Arnel

    Hi Arnel,
    Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
    from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
    Event Id 465
    Hope this helps.
    Best regards,
    Justin Gu

  • C3-01 won't start after charging

    I'm so angry right now but I will try and be cool about this!
    I bought C3-01 mobile phone about four months ago and it is already causing me problems.
    The mobile phone simply won’t start after charging. Last time i charged it, it miraculously came to life only, and only after annoying me for about hour and a half. Now I fear it is completely dead!
    Battery was not completely empty so the phone should still start even if the wall socket is broken. Which is not, wall socket works perfectly.
    Nothing helps! I tried removing the battery and then restart. Removing the battery then removing the sim card, memory card and that piece of “advanced technology” simply won’t start!
    I didn’t buy my new phone so that I can use my old Motorola mobile, which btw., still works after 4 years of intense usage.
    I will never buy Nokia again!

    Hi,
    Sorry to hear that your phone is not starting after charging.
    I would suggest one more thing, which maybe helps. If you have another battery, please try.
    If not,  i would recommend to visit Nokia Care Point in your area.
    To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
    Br
    Mahayv

  • Nokia 301 - worked 5 minutes

    Hey guys,
    I just bought a Nokia 301, after starting it up for the first time and knowing with all the bugs that are on the forum, I decided to updatet it to latest firmware. It downloaded the update, went onto installing it, and after it I got a white screen and after that the phone went dead. I left around 30 minutes, thinking it was working on the background, took the battery out, put it back again, plugged it in the charger but still nothing.
    Holding the power button sometimes it vibrates, but in other cases it's just a black screen in a black plastic case... I contacteted the service and they promissed an exchange phone in 2 weeks...
    I am just wondering if there is any chance to turn the phone on, or I have to wait for the replacement phone? I didn't even made a call with it, like I said it worked for 5 minutes.
    This is far the worst ever experience I ever had with a phone, so far the record was with a Motorola that lasted 4 hours.

    csimby:
    yep, unfortunately the only option would be to take the phone to the a Nokia Care service point (or the shop where you bought it) and get it either reflashed or replaced.
    could you send me the phone IMEI number via private message? That would help us to investigate whether there is something wrong with the update package you downloaded. 
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • N97 Camera won't start

    Hello everybody,
    We I open the lenscover of my n97, the screen turns black (sometimes I see the buttons on the side, but not the option button) and the camera won't start. Also via the menu it doesn't work. The screen stays black and the only way to turn the camaera-application off is to turn the phone off.
    I haven't done a hard reset yet, because I hope someone has got the same problem and could solve it easier.
    Greetz,
    John

    if your phone updated to the latest firmware? and you just might have to consider the first two options. make sure you take your battery card out and back up all your data. the first option will restore default settings but you will not lose any data. try that and see what happens.
     1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
    2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance. 
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Maybe you are looking for

  • How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials

    Hi, We dont want to use the default JPA provider "Toplink *Essentials*" that comes with OC4J. Rather we want to use Oracle Toplink 10.x I downloaded [Oracle Toplink 10.x|http://www.oracle.com/technology/software/products/ias/htdocs/1013topsoft.html]

  • Database View ---- Execution Time

    Dear experts, I hv to improve the performance of a report in which a view has been used. I hv debugged the program, when control goes to query that is fetching data from view, taking very long time. Can anything be done to improve the performance of

  • HT4847 iOS 6 software update.

    I want to download the iOS 6, but it says I don't have enough available storage for it yet i have 5 GB of free storage on icloud. Does this not contribute to the storage needed for the software update? My phone is only the 8 GB iPhone 4. Can I not ge

  • Time Capsule backup not working anymore after upgrade to Snow Leopard

    Hi, after I upgraded to Snow Leopard I started the backup process with the time capsule. Within several days I tried this about 5 times and the iMac crashed or froze after some time doing the backup - but it never completed. I then deleted the whole

  • Ztables or  custom tables

    hi to all abap gurus my querry os as follows have u ever created ztables so far . if so pls tell some situtations (scneraios) where u have created z tables . it is one of the interview question asked ? pls tel, in deatail . points will be rewred for