Nokia 3110C bluetooth headset trouble (bad sound)

I just updated my phone from software version 5.50 to 6.60 to solve the echo problem that occasionally occurred.
Ok the first problem seems to be solved but now I noticed that the outgoing sound from my headset ( I tried 2 different headsets ) is distorted. I made a comparison with my old 6021 and it is a huge difference. The 6021 sounds much better then the 3110C with the headsets. It looks like the 3110C is gaining the signal to much.
Are there more users who experience this problem?
Message Edited by nico_be on 14-Aug-2008 02:05 PM

I think it is a symptom of the information and knowledge at the user level with Bluetooth.
Not something which the user can be responsible for but the only Bluetooth documentation I have found is highly technical documents and lengthy specification and agreements.
The device documentation is as usual lamentably small and gives no information above basic.
In this particular question I found, because of lack of clear info, I was using the Headset service and should have used the AV service which gave a much improved quality.
Thanks
Nigel

Similar Messages

  • 6682 and bluetooth headset with no sound - Here's ...

    Hello,
    I had an 'no sound' issue with a 6682 and a Jabra BT250 bluetooth headset. I've had the phone for 2 months and used the BT250 with it every day.
    My problem started when I connected a POP connector and wired headset (not the standard Nokia version). From that point forward, when I connect my bluetooth headset all of the correct icons appear on the phone showing the BT headset is connected and the bluetooth connection is functioning, but the sound does not come out of the headset. It comes out of the handset (like a normal call) instead.
    I searched through the forum and found this procedure listed for the N70 and other headsets.
    - Take out the battery
    - Take out your sim
    - Leave it for at least 2 hours
    - Put another SIM into it
    I'm adding these steps
    - Turn on the phone
    - If prompted, enter the correct time and date
    - Pair the headset with the phone
    - The headset should now work correctly
    - Power down the phone and replace the borrowed SIM card with your own.
    - Pair the headset with the phone.
    - The bluetooth headset should now work correctly.
    This procedure correected my problem. A thorough cleaning of the connector contacts did not help.
    I hope this helps someone else.

    Did you ever figure out how to use the headset? I am having the same problem

  • Nokia 6500 bluetooth headset

    hi..can anyone tell me what is the best bluetooth headset for the nokia 6500 classic for when my old headset disconnects when my phone locks... your help would be most appreciated..........skyhook77

    Thanks Psychomania

  • BH501 stereo Bluetooth headset - v/poor sound

    I have paired the Nokia headset with a Bluetake USB Bluetooth adapter and eventually obtained the stereo music through the headset.
    The music played as good quality sound, though it was interrupted every 15 or 20 seconds even though I was sitting only 4 feet from the PC!
    Then when I moved out of the room the music stopped completely.
    Now it is difficult to reconnect the device even though I am again only 4 feet from the PC. When it does reconnect the music quality is very poor and also while the Status shows the signal is Good, the Activity is not changing at all!
    I have updated the drivers and software for the USB adapter with no change in the sound.
    Please can you tell me how to reconnect to this device with full data flow and the previous high quality music?
    Thank-you
    Nigel

    I think it is a symptom of the information and knowledge at the user level with Bluetooth.
    Not something which the user can be responsible for but the only Bluetooth documentation I have found is highly technical documents and lengthy specification and agreements.
    The device documentation is as usual lamentably small and gives no information above basic.
    In this particular question I found, because of lack of clear info, I was using the Headset service and should have used the AV service which gave a much improved quality.
    Thanks
    Nigel

  • Nokia 6500 slide, headset trouble

    i hav a nokia 6500s - 1 V 10.00
    i jus started using the headset. i plugged the headset..bt the phone did nt recognize it..( atleast, i dint show tht headset icon thingy )...i went to settings > enhancements  but onli found two options, tv cable and charger. so i plugged in the headset, and activated tv out...i cud use it to hear muzic, bt nuthin else, no radio......and the sound quality was horrible.
    after sumtime, the sound quality got better..n i chkd the screen, n thers the headset icon. i agn went to settings > enhancements n ther nw was a third option, headset!!!! i was surprised becoz im damn sure it wasnt ther b4..
    bt nw agn the phone doesnt recognize is n i hav to activate tv out to listen to muzic
    can nybdy plz help me solve this problem.
    n sorry for the loong post..i figured, if im explainin ma problem, i mite as well explain it in detail  

    Hello,
    I've recently got a new 6500 slide, it's an O2 model but I'm using it on Virgin (or T-Mobile as the phone tells me!)
    Anyway, it was fine for a couple of weeks and I'm very happy with it generally, until yesterday when mid call the other person could no longer hear me, and now the same on every call I make or receive. It seems as though the microphone has just simply given up, I've tried taking the sim and battery out for a few minutes - just on the off chance really but as I thought that didn't work!
    Also, and this isn't so much of a problem, just strange - whenever I take the cover off the back I lose my wallpaper!
    Anyone got any ideas.....??

  • Bad sound in Bluetooth Headsets when input is Bluetooth

    I have three different Bluetooth Headsets:
    Plantronics Voyager Legend
    Plantronics M155
    Jawbone Era
    And have same problem.
    When I set Audio Input to Bluetooth Headset then output sound became very bad quality.
    I discovered problem!
    Look this screenshot.
    I can't select 44100 Hz and 2ch-32bit!!
    Why? I can select Format: 44100 Hz 2ch-32 bit only with Internal Microphone.
    I tried my Headsets with Macbook Air and Macbook Pro - problem present in both notebooks

    up

  • SOUND OF ONE SPEAKER OF NOKIA BH103 BLUETOOTH HEAD...

    SOUND OF ONE SPEAKER OF NOKIA BH103 BLUETOOTH HEADSET IS TOO LOW..I RESETED THE HEADSET..THEN TOO,THE PROBLEM PERSISTS

    Hi: i am able to do the pairing and I can use the handsfree phone but I cannot hear the sound from my U tube through my stereo headset. Can you help.

  • Re-connecting a Bluetooth headset after being more...

    I have a N80 and a Nokia HSW3 Bluetooth headset. It paired no problem. I switch on BT on my N80 1st, then switch on the BT headset and they connect no prob.
    However if I leave the car for example leaving the headset swictched on in the car, when I return, it doesnt seem to auto reconnect to the headset.
    Can this be done? do I have to do something to achieve this?
    Please help, it says nothing in the manuals
    thanks
    My N80 is on Orange purchased in June 2006 firmware v 3.0617.06 03-05-2006
    Cheers
    Andy

    no one got this problem? Is my handeset or headset faulty then?
    thanks
    My N80 is on Orange purchased in June 2006 firmware v 3.0617.06 03-05-2006
    Cheers
    Andy

  • No sound on my Sony Bluetooth Headset because Windows 7 can't find Bluetooth peripheral device driver

    SO, I am dealing this problem for the second day in a row and no working solution still. I own the latest iMac 2014 (though the model is exactly as 2013) 2,7 Ghz with Bluetooth 4.0, I've installed through Bootcamp Windows 7 x64. My bluetooth headset Sony DR-BTN200 http://store.sony.com/bluetooth-headphones-zid27-DRBTN200//cat-27-catid-All-Home -Theater-Headphones (which is on Bluetooth 3.0 and of 2013 year model) is working fine with Mavericks and Yosemite on my MBP, but not working as it should on iMac with Windows 7..
    THE PROBLEM: I find the headset, connect it, but afterwards Windows writes that no drivers for Bluetooth peripheral device were found (3 or 4 encriptions like this, so, 3-4 drivers needed). The headset itself guarrantees fine working with Windows 8, the producer doesn't give any drivers to install, you won't find them on Sony's website - it should work as plug-n-play, they say those drivers are preinstalled on Windows 8.
    WHAT I'VE TRIED: So, the problem, as I've read from many-many-many sources is common for everybody running Windows on Mac devices. In cases with notebooks it is easy to solve (if you know it) - download the Bluetooth software from Broadcom (the producer of Bluetooth adapters/receivers of  Macs) http://www.broadcom.com/support/bluetooth/update.php - install, it finds the devices and istalls correct driver. This worked with my MacBook Pro 2010, on iMac it stucks on recognizing devices - nothing happens next, like it doesn't recognize any bluetooth device. Downloading many other drivers packages didn't help either, nor Toshiba Bluetooth helpers could detect Bluetooth headset to properly download the correct drivers (though it was already recognized by Windows, just couldn't connect properly), nor different other programs like Bluesoleil, Blue manager and so on.
    On other notebooks and computers many try to install manually the drivers, usualy Microsoft Windows mobile-based device support. I've tried to install many drivers, all of the Broadcom drivers I've found (including the Broadcom Bluetooth 3.0 USB driver that makes the headset work on MBP), and I must say that Windows recognizes (doesnt show the yellow triangle next to the icon of the driver) only for the Microsoft Windows mobile-based device support driver. Though it's like that, the sound still is not playing out of my headset. On MBP after the drivers were installed, I chose the device in Printers and devices and there was an option of Control (maybe I remember the name wrong), it went first in the right-click menu, and aftewards there was a page were I could connect my headset through ticks/checks on different options. Nothing like this appears if I install any of the drivers on iMac (nor Broadcom, nor Win mobile-based). I must also mention, that some kind of package that I've downloaded from Toshiba or Acer's Broadcom Bluetooth kit, I don't remember, installed some bluetooth drivers (Bluetooth Audio, "receiver" if I recall it correctly and 2 more), that were recognized as right drivers for peripheral device when I connected my headset, but even then - no sound came out of the headset.
    HELP ME: What shoud I do? I've tried all of the methods that are on the net. Sony store won't help me out, because the problem is not in the device - it's in the software/hardware of "your iMac". The headset works with Mac OS, should work fine with fully-Windows PCs, it just doesn't with iMacs on Bootcamp Windows. The interesting thing is that updating windows to Windows 8 might also not help, since Sony guarrantees only work on pre-shipped with Win 8 devices, not with the upgraded devices. I do think the problem is with drivers, that Mac's Bootcamp utility doesn't come with pre-installed Bluetooth drivers for connecting Bluetooth headsets, only for the Apple mouse and keyboard. I must also mention that I've tried to install manually many of the Broadcom drivers, all of which were for Bluetooth 3.0 or 4.0, they didn't help.
    It's awfull that I've got the latest iMac, so the latest hardware and face such problems. I only think that a cheap 5-7$ bluetooth-usb adapter could help, maybe it could recognize the headset and therefor install its own drivers for its manufacturer. But I don't imagine how would it work and connect since iMac has a peinstalled Bluetooth receiver. Is there a software sollution? An app or driver?

    So, finally I found what worked for me: Re: Full Bluetooth functionality in Bootcamp (audio, A2DP, FTP, OBEX) third variant, none of first 2 worked.. The only trouble was to find the correct link since on Acer site there is no download link. I've googled for "Bluetooth_Atheros_7.4.0.96_W7x64_A.zip" since this is the archive the guy is actually talking about. The 4th link on google was http://www.laptop-software.com/Acerdriversdownload.php?GDFiles/Driver/Bluetooth/ Bluetooth_Atheros_7.4.0.96_W7x64_A.zip?acerid=634556349384706773&Step1=Notebook& Step2=Aspire&Step3=Aspire%204830Z&OS=721&LC=en&BC=Acer&SC=PA_6 and I chose to downlad from the first download link. Then the steps are:
    1) unzip the folder
    2) don't look for x64 or x32, there is only a one installer called "Bluetooth_Suite_win7"
    3) install Bluetooth_Suite_win7
    4) after it installs Windows starts downloading and recognizing drivers, I don't know how it actually works, but it also downloaded and recognized the unrecognized before drivers for my Bluetooth headset.
    5) Restart Windows
    6) Turn on headphones - they connect automatically, everything works and works great, the quality of sound is exactly the same as it was on Mac OS, nothing that would bother me.
    ****, it took me 2 full days... finally...

  • Nokia Purity (in-ear) - the solution to bad sound ...

    I read a lot of review about bad sound on the Nokia Lumia phones but I tried various hifi headphones on it and it was amazing. The main issue is that you cannot equalize the sound to match your headset. I wanted a headset with controls and microphone that could match my hifi headphones, and I decided to try these. The packaging is amazing and the design matches the Lumia 800 (black) and everything feels high quality. There are many shapes of earpads for them to match your ears. 
    I first tried the ones that are already on them, and I found the bass too high. Then I changed the pads and got too little bass. Then I tried some pads in between and the sound is perfect 
    So even if you cant change the bass on the phone itself, you now can by changing the pads on the headset.
    I will comment more on sound quality as they get "broken in".

    Smiley,
    What you suggest isn't really a SOLUTION to bad iDVD photo quality, because you aren't creating a DVD that can be played back with a DVD player.
    You are simply suggesting an alternate approach for distributing slideshows which requires the receiver have a computer. iPhoto/iMovie give you several options on prepairing slideshows/movie for various methods of distribution (CD, email, etc).
    Some DVD players will also play jpg files from a CD or DVD and that avoids the mpg-2 compression quality loss, but a TV set image is still a TV set image.
    which gives you over 90 pictures for a 10 MB slideshow
    A lot of email programs aren't happy with a file that size, and of course, since you have created a QuickTime movie, your PC friends will also need to install QuickTime. The Flip4Mac Studio application will let you convert your QuickTime movie to a WMV movie for those with PCs.
    I'm glad you found an approach that you are happy with.
    If you open the file in Quicktime and got to Window > Show Movie Info, you will see that it lists each JPEG within the package, along with a transition component. It doesn't compress the images into a video file, but rather references the original images within the .Mov package
    BTW, there are several different CODECs that can be used in the .MOV file container - Photo JPEG is just one.
    QuickTime Pro offers more saving options than the standard version, so I recommend you invest in QuickTime Pro. You will be able to create your slideshow directly in QuickTime Pro.
    F Shippey

  • Need a high quality Bluetooth Headset for my Nokia...

    Hi everyone
    can any of you recommend a really good Bluetooth Headset for my Nokia N80 ?
    want something with crystal clear sound, no distortion and one that fits nice and snuggly without being uncomfortable...
    Thanks....

    Hi, I use the Nokia HB-900 with my black N80 and they work flawlessly together, PTT is perfect, Voice quality is like nothing you have ever exprienced in a bluetooth headset, the noice canceling in BH-900 and the extended boom truely sets this headset apart from what you have used before and the long battery life is just great. i realy like the look of it and it is the only headset i actualy wear in public without feeling stange, its pretty light and comfortable, i forget i am wearing it and it doesn't swing around or move when i turn my head, it's quality is good and matches the n80 finish ( i have the one with the black extendable boom ) and works perfectly, it also has a blue light on it that matches the blue light on my n80. it's worth every penny. when i use it the people on the other end of the line do not believe that i am using a cellphone as the voice quiality is great due to digital voice processor and the noise cancelation of BH-900, you can't go wrong whit this one.

  • My T530 is not showing the paired Bluetooth headset in "Sound"

    I just paired my Samsung HM1700 Bluetooth Headset to use it as headphone.
    The pairing was successful, although I didn't need to enter the pairing code, mlaptop found it, and installed necessary drivers, also I see it in the Devices & Printers.
    But when I went to "Sound" setting to set it for the headphone to listen under "Playback", I don't see it...
    I hope someone can help me!
    Thank you. 

    It sounds like you have a bad USB driver for the phone. That software is installed with iTunes. Like I said earlier, you need to make sure to uninstall everything using that support document. That clears out all Apple software. Do that without the phone attached to the computer of course. Once you have reinstalled everything, then try and connect it. It should load the USB driver and begin to work.
    Let me ask you this. How many pictures do you have in the camera roll? If you have a large number of them and  you have not imported them to the computer, there could be a corrupt picture causing you some problems. While that was known in the past to cause syncing problems, I thought that was fixed. If after you uninstalled iTunes the phone was recognized as a camera, I suggest importing the pictures and then deleting them from the camera roll and try the process all over with uninstalling and reinstalling iTunes. See if that helps.

  • Nokia Maps and Bluetooth Headset

    Whenever I have my bluetooth headset connected and I'm using Nokia Maps (2 or 3) the volume for navigation keeps switching itself off.
    It's not the volume on the headset as this works fine and I can make calls without the volume dropping.
    I turned the volume up on my N96 and the next time I get voice directions by NM the sounds drops away again, pretty annoying.
    I've re-installed NM maps a few times including the sound files just in case that was the problem and I now that I've moved to NM3 I was hoping the problem might have gone away....it hasn't.
    Does this happen to anyone else? Anyone got a fix?
    Oh and does anyone else think the Female (UK) voice in NM3 sounds fed up when giving directions?

    Hi,
    I seem te have the same problem with N82 connecting to standard bleutooth peugeot carkit.
    I raised a call with nokia buth they seem to not want to support because of third party. I hooked up an HTC S740 from my buddy this one works like a charm.
    Looks like nokia is going into headset modes, see headset icon. Then all sound should go to headset. However my carkit supports also handsfree and it seems like the connection with my nokia keeps ending up in headset!
    nokia please help, this has nothing to do with the carkit!
    Kind regards Christian 

  • System sounds through the Bluetooth headset while listening to audio

    Not sure if anyone had this issue, I have read a few about cars and bluetooth connections but no mention of system sounds not operating.
    I was using Motorola S9 bluetooth headset and the music was fine, but after I returned home I noticed that I had missed several text and some email notifications. The sounds operated correctly without the headset connected so, my only guess is would it be related to the Bluetooth operation?
    Thanks, Joe.
    Post relates to: Pre p100eww (Sprint)

    Could this be patched in the 2.0 release? I can't wait til christmas; no really, I hope they don't take that long to release the update.

  • No sound on Youtube with my bluetooth headset

    Hello world !
    I've have a curious problem with Youtube.
    When i go on youtube with my bluetooth headset on my head, the sound of the videos is not in my headset but in the speakers of my PC
    But i have no problem with other sites like Jamendo for example. Have you got an idea ? xD (Oh and my web Browser is Firefox )
    Thank you for reading this post.

    Hi there!.
    I'm just curious: Have you tried the minitube client (you can install it through the official repos). See if you get output there when trying to see a video.
    That is the best bet I think you have in terms of the software you use to see flash content. You could also try the google-chrome package of the AUR and check how does that browser react to the BT headset (there are differences between the flash plugin of Firefox and Google's).
    I hope this helps you in some way while someone smarter than me sorts out your issue.
    Best of Luck

Maybe you are looking for