Nokia 3110c problem when trying to start

Hello. I have a problem. I can't start my phone....more detailed, when I start it up, the screen remains white and the only thing that appears is the battery sign and after 3-4 white/black screens the phone stops. If i try again to start it, same thing happens. I heard that the memory card could be a problem but, even if I remove the card the problem remains.
Is there any solution to this?
Thanks.

Try flashing your phone. Sometimes a slightly corrupt firmware might compromise the performance of the phone as a whole. But there is also a possibility that it's a hardware problem.
And you could only do that by means of sending your phone to the Nokia Care Centre near you.
Kind regards

Similar Messages

Facing problem when trying to start the addon manually

Hi,
I have created an add-on using simple addon installer project. The prepared addon has been installed successfully. After installation, when trying to start the addon manually by Add-On Manager,
The addon exe is giving an error message at the line when try to instantiate the SboGuiApi.
"SAPbouiCOM.SboGuiApi SboGuiApi = new SAPbouiCOM.SboGuiApi();"
The error message is -
"Could not load file or assembly 'Interop.SAPbouiCOM, Version=6.8.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
and finally it gives an error message "Add-On connection timed out".
Note: At the development end we have tested it on our two systems its working properly. But on the production system its giving the error
Please help!! its urgent...
Regards,
Ashok

Hi suresh,
I have tried it number of times, but the problem not been addressed yet.
Or can you please clearify what exactly do you mean by UIAPI.
What we have did at our end is -
Just removed the SAPbouiCOM.dll from the references and add it again.
"I am using SBO 2005A SP01 PL-31"
If you have any more ideas please reply back
Thanks for prompt response
Regards,
Ashok

Problem when trying to start Weblogic server

Hi,
I have a problem when in was trying to start the weblogic server from the
Weblogic Console.It Loads all the necessary files and finally it comes out
giving an error "Server start message not received in allotted time, server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company

Hi!
I'm quite sure that this is a time out problem. I need about 3 minutes to start
up my weblogic server. It's no problem to start it from a command prompt
(startWeblogic.cmd), but using weblogic console application I always got a time
out after 120 seconds. On a faster computer, where the start up process can be
finished in less then 120 seconds it was no problem to start the server with the
same amount of EJBs.
Does anyone know how to increase the time out parameter for the weblogic console
application?
Best reagards,
Przemek
Ramesh wrote:
Yes Its resource problem i suppose..
My friend who is working with WL advised me to us 128 MB RAM to work with
Weblogic server.
Justin i need one more help
I registered my servlet in Weblogic.properties.But when i try to load
it from the command tab says "Property change error on LOAD".I dont know
what
properties i have to change to load this.
Even the existing example servlets i coundnt Load.!!!!
Can any one help on this problem
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I actually got WL to work on my system yesterday. I found that it was aresource
problem. I had to shut down my X Server; if you don't know what the XServer is,
it's (basically) the app that runs a window manager. It was consuming toomuch
of my processing time. WL is now the only thing running on that machine.
Since you have NT, You may want to try shutting down all uneccesarydevices and
app's.
Ramesh wrote:
My System is
Win NT 4.00
Pentium pro 199 mhz
and 80 mb RAM
Is that because of the Memory Problem?
I dont know because i am able run it well when it trought command
prompt.
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I posted a comment about this last week and have to receive a reply. Ialso saw
a post from April about this and there were no replies to it, either.
My problem exists on Linux whether I use the console or not. What are
the
specs
for your machine?
Mine:
Linux 2.2.15
P/Pro 199 MHx
128 MB RAM
Ramesh wrote:
Hi,
I have a problem when in was trying to start the weblogic server
from
the
Weblogic Console.It Loads all the necessary files and finally it
comes
out
giving an error "Server start message not received in allotted time,server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company--
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Przemyslaw Rychlewski Tech@Spree Software Technology GmbH
mailto:[email protected] http://www.tech.spree.de
Tel +49 (0)30 235 520-34 Bülowstrasse 66
Fax +49 (0)30 217 520-12 10783 Berlin

[Solved] Font problem when trying to start qmon (sun grid engine)

When I tried to start the qmon (queue monitor program), the error message show up as below:
[root@sge01 ~]# qmon
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-bold-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--20-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--12-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--24-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-bold-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--12-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--10-*-*-*-p-*-*-*" to type FontStruct
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 514
Current serial number in output stream: 525
[root@sge01 ~]#
I have all the fonts from the official depository installed (verified by the command # pacman -Ssq font ). I use LXDE and the system has been updated.
Is there anything I can do to run this program?
Last edited by teetee1 (2013-08-28 04:24:40)

Thanks for the link. I was able to solve the font errors quickly, which is great!
Unfortunately some other errors remain:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 478
Current serial number in output stream: 489
I've tried to follow instructions from the links below:
http://ubuntuforums.org/showthread.php?t=1778584
http://www.edaboard.com/thread139363.html
But realized I already have the xorg- 100dpi and 75dpi fonts by checking with the pacman command: pacman -Ssq 100dpi (and 75dpi).
Any help is greatly appreciated.

Problem when trying to start BEx Analyzer (7.0)

Hello - We have completed an upgrade of a sandbox to NetWeaver BI 7.0 (from BW 3.5) and we are getting ready to have users start to test to find functionality issues. When I start Business Explorer (7.0), it opens Excel (2003) with no problem and the menu appears and the icons appear to be active. However, when I mouse over any of the menu items, the text is in German, and if I click on any of them nothing happens. I have run the sapbexc710.xla spreadsheet and it comes up with some yellows (version on PC is higher than expected), but no reds.
Is there a known solution to this? This is the first time we have tried to run the 7.0 version of BEx Analyzer, but we have been using the 3.5 version for a couple of years.
Any assistance is greatly appreciated!
Regards,
Blair Towe

Hi,
You need to install this support package.....bi710sp05_500-10004472
Regards
Prasad Nannuri

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

When trying to start Firefox I keep getting message saying "A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I've started a new Profile but Profile Manager keeps telling me the Default one is still in use.

When trying to start Firefox again I got a message saying "Close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time." This question is addressed in Mozillazine but nothing I've tried from there seems to work. I started a new Profile from the Profile Manager which at least gets me up and functioning, but weirdly enough the Manager also tells me the old (Default) profile is still running, though I can't find a way to close it. I also can't find the Default profile in my profile manager. can anyone help?
== This happened ==
Just once or twice
== i thought I'd exited Firefox and was going in again.

Had this problem on my MacBook after I deleted my profile (the profile folder is named something like asd8f7as.default). The solution for me was to open profiles.ini and delete the information about the profile I had deleted. It should look something like this:
[Profile0]
Name=default
IsRelative=1
Path=Profiles/2xr4hi1g.default
Delete, save, problem solved.

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1. I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem. Strangely enough PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

Hi There, I have a problem when trying to print either Email or from a web page.

Hi There,
I have a problem when trying to print contents fro either Email's or from web pages, the problem started after i opened Google earth and it down loaded Google Chrome i do not like Google chrome so i removed it from my pc via add and remove programmes since then when i try to print an email i get what looks like the computer settings for writing the email and not the text same for web pages, as anyone come across this problem before i can print any word or spreadsheet documents but problem is with email's and web pages.
Many Thanks.

Something changed on your system, possibly when Google Chrome installed. It could be many things, but what it boils down to, is it needs to go back to the way it was. Either by removing whatever else might still be left from the install, or maybe by reinstalling the printer itself.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Problems when trying to migrate from 6.0 to 6i

Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, Michael

The migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue

Error when trying to start Apache Chemistry Workbench (./workbench.sh)

Hi colleagues,
when trying to start the Apache Chemistry Workbench with ./workbench.sh (as described in Unit 4 of Week 3 of the SAP HANA course), i'am getting the following error:
Can someone please help me?
Thanks and regards
Thorsten

Hi Dieter,
yes, that solved the problem. I'am using MKS Toolkit under Windows, so that i can use the bash in the command prompt. I thought wrong. ;-) With the batch file it works fine.
Thanks
Thorsten

Auroraservice error when trying to start http Server (9iAS)

Hi
my problem is that when trying to start oracle http server I get the error message:
syntax error on line 14 of mod__ose.conf
AuroraService-directive already in effect for this sever
what does it mean and what can I do?
thanks in advance

Thanks, I now see the ASP.NET 20 version. I am now getting the following error.
Server Error in '/OSoft' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +264
   System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +877
   OSoft.Services.Platform.Logging.Logger.logError(Object source, String user, String err) +0
   OSoft.Consumers.ZFP.WebBase.PageBase.logException(Exception ex) +312
   OSoft.Consumers.ZFP.WebBase.PageBase.WriteException(Exception ex) +24
   OSoft.Consumers.ZFP.WebBase.PageBase.page_load(Object sender, EventArgs e) +2313
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407

Help - Photoshop Elements 8 crashes when trying to start Organizer

Photoshop Elements 8 crashes when trying to start Organizer. Funny, that starting the Photoshop Editor is not a problem and works fine.
I deinstalled the software and then installed it again, but had no effect.
What can I do?
Nick

The Organizer preferences may have become corrupted, needing to be automatically re-built on a re-start.
Close Elements.
Click the Start Button and then your user name (in place of mine) and navigate to:
C: Users >> 99Jon >> AppData >> Roaming >> Adobe >> Elements Organizer >>8.0 >> Organizer
Delete the PSA file (with key symbol) and delete Status.dat
After deleting these two files re-start the program
AppData may be a hidden system file. See the link to reveal hidden files.
http://windows.microsoft.com/en-GB/windows-vista/Show-hidden-files

ITunes 10.4.1 does not open (Win XP, 32 bit) crashes always when trying to start

iTunes 10.4.1 does not open (Win XP, 32 bit) crashes always when trying to start Itunes.
Tryed to repair, new installation, nothing worked.
Can anybody help me, any idea?
Thank you, mrlavazza

Sorry for this late answer. I had not to time hanging around on the pc. Thank you for your help.
I solved the problem, lucky!
After deinstalling all Apple Software (except safari) I started the PC again and installed Itunes another time.
It worked, so I am happy, still not knowing what was the problem.
The best thing is, that my mediathek is still running (I hoped so, it was put on another harddrive.)
Updates should not stress that way...
Thanks again for supporting,
mrlavazza

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

Nokia 3110c problem when trying to start

Similar Messages

Maybe you are looking for