Nokia 3230 unable to connect to internet via USB c...

when i use CA-53 cable to connect to internet using nokia pc suite7.0.8.2 (one touch access) an error message pops up "unable to connect to the speified device make sure the modem is configured properly" but i can easily connect to internet via bluetooth other functions like file manager , contacts , messages and back up can be accessed by using the CA-53 cable

I called a vw dealership (in South Australia) today because I have an iphone5 and a Tiguan and experienced the same thing (after i had purchased the lightening/30pin adapter).
I was advised that the media interface software is not compatible with iphone5. VW will eventually update the software according to ol'mate at the dealership, but it will be at an expense to the consumer allegedly.
I know that there is a iphone/vw media cable one can purchase from VW however, I believe this to only work with iphone4 or older?
Maybe try an older generation ipod to use for the car if all ur music is in itunes?
if anyone can correct me, I'd be more than happy to know... going to try my older generation ipad and see if there is any truth to the tale.... eventually. Until then i'll stream via bluetooth :-)
Sheree

Similar Messages

HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

GOT MINE FIXED -
THE 7.0.3 update reported my iPhone as LOST or STOLEN to Verizon.
They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
They said "we've been doing this ALL MORNING."
Hope this works for others, too!
You blow bright orange chunks, Microsoft, er, I mean, Apple.

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

Nokia N8 Can't connect to internet via WIFI

HI!
I have some problems to connect to internet via wi fi! I can connect to my wifi adaptor on my pc(hot spot) with no issues but it wont be able connect to the internet I checked this issue whit a sony ericrson xperia x8 and theres not any problem but my N8 cant connected to internet.
Solved!
Go to Solution.

alucard3 wrote:
Resolved by unofficial but efficiently hotfix.
http://www.n8fanclub.com/2012/12/wlan-connectivity-software-update-for.html
Hi am having the same problem but the link above does not work?
Thanks
ledders

Unable to connect to Internet via Airport Express - 'cannot contact server'

I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
The connection works fine via Ethernet cable.
Any ideas?

Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
Any other ideas?

Unable to connect to internet via wifi

I have had this problem ever since I received my preordered Dinc. I can successfully connect to the internet via wifi anywhere but at my place of employment (very frustrating). The Dinc sees and connects to the wifi but when I open the browser the following pop up window appears:
“Security warning
There are problems with the security certificate for this site.
This certificate is not from a trusted authority”
I then have a choice to continue, view certificate, or cancel. When I view the certificate it states the organization, The Go Daddy Group Inc, unit, Go Daddy Class 2 Certification Authority and validity:
VZ tech support stated that they never heard of it and recommended that I call HTC.
HTC said that this is a common problem and that Go Daddy uses a variable wild card for their SSL. The conversation ended when they said that there is nothing that can be done.
I finally contacted Go Daddy who said that they need the account number without that there is nothing that they can do.
Laptops, Iphones, and other cell phones can get on the internet.
My questions to this board are:
Has anyone else had this issue?
Does anyone know of a fix?
Who is responsible for the fix VZ or HTC?
Do you think that when (ever) the OTA update to Froyo will fix this?
Thanks to all

I'd talk to your IT dept at work.

Unable to connect to internet via Airport (wirelessly)

I have 2 Macbooks at my house. One can connect to a password protected wireless connection just fine, the other is unable to. I have Mac OS X 10.5.8 and 10.4.(something) on the other.
When I enter in the WEP code and try to connect to the server, it says that I am unable to. I am 100% positive that the password is correct.
I have tried deleting my preferred networks and my keychain passwords for networks and nothing has worked.
Thanks you

The computer was allowed to connect before, and has until about a day ago.
I'm not sure what kind of password it is, but I cannot change any of the settings just to put that out there.
I have tried both the Airport icon, and through internet connect. no luck either way.
Not sure about what the router is in, but it should be accessible since it was before and other computers and iPhones can connect to it just fine.

Nokia N80 won't connect to internet via airport extreme

My Nokia N80 connects to the internet through a wireless network at work (not sure of the set up) but won't connect to my wireless network at home which is airport extreme with 128bit encryption. Any clues?
Thanks in advance

Probably a WEP key issue.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
iFelix

Mac mini unable to connect to internet via router

I can't seem to connect to the internet using my mac mini.i use a netgear wireless router which has my imac,and 2 windowsxp PC and a maxtor network drive connected ,these all work on the network.
The macmini(no airport) is connected using an ethernet cable and a netgear powerline ethernet adaptor.
I cant solve the problem!Can anyone help me please?
Dan
themint

Hi Dan
Have you confirmed that the Netgear Powerline adaptor works fine with other computers on your network?
On your mini, if you go into System Preferences - Network - Built-in Ethernet, what are your TCP/IP settings? Are they the same as for the iMac?
Matt

E6 cant connect to internet via usb cable

Hello,
My phone is Nokia E6. I've installed Nokia Suite (v: 3.6.36) on my pc.
I connect usb cable to E6 and pc. Run Nokia Suite. And then I connect my pc to internet. I expect E6 will connect too but it's just not working.
Can you help me on this?
Solved!
Go to Solution.

@rebulanyum
Have you tried both via Bluetooth and USB connectivity as per this resource?http://www.nokia.com/hk-en/support/product/e6-00/troubleshooting/?qt=Modem&comp=nokiatroubleshooting...
Happy to have helped forum with a Support Ratio = 42.5

8220 unable to connect to Mac via USB connection

hello
I installed the software, but none of the file transfer menus are available.
please help
thanks,
Llyane

I called a vw dealership (in South Australia) today because I have an iphone5 and a Tiguan and experienced the same thing (after i had purchased the lightening/30pin adapter).
I was advised that the media interface software is not compatible with iphone5. VW will eventually update the software according to ol'mate at the dealership, but it will be at an expense to the consumer allegedly.
I know that there is a iphone/vw media cable one can purchase from VW however, I believe this to only work with iphone4 or older?
Maybe try an older generation ipod to use for the car if all ur music is in itunes?
if anyone can correct me, I'd be more than happy to know... going to try my older generation ipad and see if there is any truth to the tale.... eventually. Until then i'll stream via bluetooth :-)
Sheree

Nokia c5 unable to connect with pc in pc suite mod...

nokia c5 is unable to connect with computer via pc suite mode but it get connected via mass storage mode . So i am unable to connect internet in my pc through my mobile. Whenever i m connecting my mobile , hardware installer of computer can't install my mobile due to code 39 shown in Computer.

is your pc with ovisuite? Try with pcsuite

When i try to load ios 7 to my i phone i receive error message unable to connect to internet however my internet is connected

I am trying to download ios 7 using i tunes application - get screen saying got download - press to download then recieve message unable to connect to internet please check connect and retry - however I am connected and so is my phone via wireless - I can not get past this error message please help. many thanks

Moved to Adobe Digital Editions forum.
Neil

My macbook pro cannot connect to internet via wifi

I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
Monireh

When you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Nokia 3230 unable to connect to internet via USB c...

Similar Messages

Maybe you are looking for