Nokia 3650 disconnects after dialing ISP

Using the Nokia IR 6210_8xxx script, I am able to successfully establish a Bluetooth connection with my Nokia 3650, but after dialing it simply disconnects.
I can manually dial the ISP from the 3650 and listen to the handshake.
Prior to installing Tiger, I was able to do a dial-up connection using the Nokia 3650 as a modem.

Thanks Alexander and Stephen — oh that I had found Stephen's link before I got my phone to work, it might have saved me hours of fun, but as I was sitting on a remote Scottish Island, it was only after I got it to work that I could read it.
The Nokia now works perfectly on the UK's O2 service (albeit at a pitiful 9,200) and I even took half a dozen photographs with the phone, transferred them to my iBook, then sent them via the telephone attached to an e-mail.
I never discovered what the problem was other than painstakingly repeating the pairing and bluetooth dial-up settings until both the phone and the computer believed me.
The only small sensitivity I have discovered is that it is completely reliable if I put the bluetooth dongle in the USB socket with the machine switched off, then fire it up.
I know that it is slow using the phone as a modem on the GSM network, but even paying for the extra time involved, it is nowhere near as expensive as being charged at the data rates on GPRS.
George

Similar Messages

  • Nokia CK20W Disconnects after 3 seconds

    Hi All.
    I have a Nokia Ck20W fitted in my car which has worked well for two years. When I had a problem with my Nokia phone, I used an HP Ipaq as a back-up.
    When I tried to connect the Ipaq it showed that the connection had been made, but the disconnected almost imediately.
    I have just upgraded to an HTC Desire but the same thing happens. I do not even get the opportunity to enter the pass code before it disconnects.
    My wife's phone (and all my previous phones) works fine on the CK20w and the HTC Desire connects every time to the Nokia CK7w which is fitted in my wife's car.
    Has anyone had a similar problem?
    Thank you in advance.

    Can't offer any help for you unfortunately but was wondering if you managed to get your HTC Desire to connect to the CK20W in the end. Was thinking of buying a CK20W kit of ebay for myself and was also looking at upgrading to the Desire in the near future but if you didn't get the two devices to connect I'll get the CK300 kit instead.

  • Nokia 3650 problem

    I have a Nokia 3650. The problem I now have is when the phone is turned on I get a note saying 'app close' then in about 5 to 10 seconds restricts most anything I can do with the phone except make calls. I cannot get into the settings to explore the problem.
    Thanks for any help.

    I have a Nokia 3650, But I am not faced with this problem.
    What happens to mine is that when I turn it on, The screen goes white and then the Nokia logo appears.
    This is normal right? Well this isn't.
    After the Nokia logo appears it disappears and the screen is still white. Then the Nokia logo appears again. Then disappears and after a minute or so the phone goes off altogether.
    Whats wrong with it?
    Sincerly,
    Charlie x

  • PAP2T Dialout disconnects after 15 seconds. Dialin Fine...???

    I have the PAP2t, I am using Gizmo5 service.
    I can get calls dialed in no problem.
    Dialing out, I get a problem  -  all calls are disconnected after 15 seconds - always the same!.  I have tried a ton of different settings and resetting to defaults, upgrading firmware...  Any ideas?
    Solved!
    Go to Solution.

    Thanks, but I just got it fixed.  Was a problem with my (dare I say?) Netgear router - WRV2000.  All the netgear's router latest firmware (from a year or more) all are incompatible.  Had to downgrade firmware to something that worked 1.1.3.9
    Now works like a charm...

  • USB Modem 21M-02 disconnects after 20 sec

    Hi,
    I have the problem with my newly bought Nokia USB Modem 21M-02. When I try to use it with Play operator (260-06) in Poland (I try 3 different SIM cards) modem disconnects after about 20 second after plugging it into USB. During this short period I can connect with it to Internet, send/receive SMS, browse phone book. Then after about 20 seconds it disconnects, the  signaling diode becomes red fast flashing, communication with modem is not possible. I checked this modem with different computers with Windows XP, Windows Vista and MacOS and problem doesn't disappear. What is interesting the problem disappear if I change SIM card to any provided by other operator. So there is no problem with Aero2, Plus, T-mobile.
    Any advice? Please help.
    Is there any possibility to update firmware? Currently there is M1.7.0.
    Przemo

    I have the same problem, but I'm using Cisco UCME 9.1
    Jabber for iPhone version is 9.1.2.21344
    Disconnects exactly after 8 seconds.
    Please help somebody!

  • Headset appearing when unplugged in Nokia 3650

    Dear,
    I am having Nokia 3650 since 3-4 years.I didn't had any problem since then.Two days ago I had bought headphones for my Nokia 3650.It worked that day and it is working now too.But the problem is when I unplug the headphone,it doesn't get unplugged from my phone and displays as it is connected.
    I had switched off and switched on my phone but of no use.
    One more problem had occurred if the headphone logo goes off while switching on after few minutes later or if I receive any call it shows headphone logo again.
    One more problem is the real player stopped playing music or I am unable to listen the music.
    Please help me.Its a bit urgent.
    Regards,
    Sheetal.

    If the 3650 is a pop-port phone then what you're describing is absolutely characteristic of moisture in the connector.
    I suggest you take the phone to your nearest Nokia Care Point so they cantake a look at it.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Nokia C7 Dead after turn off, never turn on

    Help me with this problem. I've bring the phone to shop and they sent to nokia care but after i got home. the problem arise again. Now i've been disconnect about 2 days.
    The phone would not turn on anymore.

    I have bring the phone to shop as I faced same problem (Nokia C7 Dead after turn off, never turn on) and they sent device to nokia care center. I got the new cell phone as it was in guarantee/warantee period(I am appriciating the service/help provided from Nokia side, Thanks a lot). On the same day I took that new cell to home and faced same problem again. The phone is not getting switched ON . I am disconnected from world for last 2-3 weeks as the same issue occurs twice.  This is very opposite to Nokia's statement "Connecting people". Any help From Nokia?????
     I'll provide the device details if Nokia going to help.
    Thanks in advance for support !

  • SQL Developer on Linux hangs when disconnecting after VPN reconnect

    Hello,
    I have a problem with using connections after general link failure (Cisco VPN disconnect in my case, lost of route to Oracle DB).
    When I reconnect to a VPN and I'll try to disconnect from a previously opened (before general link failure) connection, I need
    to wait more than 10 minutes to complete this process. SQL Developer is completely unusable during this time.
    Steps to reproduce:
    1. Connect to VPN
    2. Open connection in SQL Developer to host accessible only by this VPN
    3. Restart VPN
    4. Try to do anything with this connection (disconnect, execute sql in opened SQL Worksheet, view tables, etc.)
    This bug is not new in recent versions, I'm using SQL Developer from over 2 years and this bug was always with me. But if I remember correctly in earlier versions (<3.0) I couldn't reuse the connection to execute sql (hanging SQL Developer for more than 10 minutes) but disconnecting would succeed without a problem.
    Maybe SQL Developer should move connection management to separate thread to resolve this issue... or is there another solution?
    I'm using SQL Developer 3.1.07.42 @ Linux 3.0.4
    For VPN connectivity I use vpnc
    When I restart VPN connection I'm loosing TUN interface and all routes.
    I have tested this issue on a few versions of SQL Developer on Windows XP, including 3.1.07. There is no problem with disconnecting after vpn failure on Windows.
    Maybe I should fill some bug report? When I can do such thing? Metalink?
    Best regards,
    Irek Slonina

    Hi Irek,
    Possibly you can resolve this issue by altering the type of the connection that becomes non-responsive upon a VPN reconnect. What type are you currently using: Basic, TNS, etc?
    In this forum thread (for Windows, unfortunately, not Linux), although different from your case, the solution used Thick/OCI driver, not Thin/Basic:
    Windows 7 VPN
    I have no VPN client on Linux (much less vpnc), only Cisco AnyConnect on Win XP, so I cannot test your scenario.
    Regards,
    Gary
    SQL Developer Team

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • Wifi disconnects after about a minute after i am no longer using my computer . Why is this happening?

    After logging into my wifi connection, which does take some time to do.
    Why does my wifi disconnect after not using my computer for a few minutes?
    I am on osx lion  10.7.5

    Computer entering sleep mode after few minutes?

  • HT1222 I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

    I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

    Have you restarted your phone?
    If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
    Check for the app again after the phone starts back up.
    ~Lyssa

  • Skype account keeps disconnecting after 30 seconds

    hi guys,
    its driving me nuts.  my skype account keeps disconnecting after 30 seconds and i haven't even done anything.  it does it on windows, and on my iphone too.
    what's going on? is this a problem with skype?  i've seen similar posts. and i'm using skype 6.20

    That generally means there is an issue with your Microsoft account.  You may have to verify some settings in your account to make sure a configuration isn't causing it.  The only solution I'm aware of is temporarily unlinking your account.  I do not know if reconnecting it will resolve the issue right away.
    https://support.skype.com/en/faq/FA12211/

  • Nokia N70 disconnect the calls and turn on the lou...

    Hi Dudes,
    I have Nokia N70 now i am facing the problem in N70 that is my Nokia N70 disconnect the calls and turn on the loud speaker automatically. i had gave my phone to nokia care center to fix this Bug. When i gave the phone the IEMI Number was same that is mentioned on the N70 Box, but now i have took my N70 back from the nokia care center i am facing the same problem again and my IEMI Number do not match my actual N70 Box.
    I am confused and afraid that something has happened to my phone.
    Please tell me what to do know...
    Urgent and quick response needed

    sounds like you there could of been a mix up or you got a recondintioned unit back try a factory reset and see how you get on did you not get a report from nokia?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Wireless disconnect after login with Remote desktop with wpa2

    We have 5508 wireless controller with 1142 aironet acess points.... we configured Radius authentication on ACS 5.3  for wireless users
    when we take remote desktop connection of wireless client ... it disconnects after 10 sec.
    and  when we logged in to client ... connectivity was lossed  .. I have to reconnect Manually  to client..
    It's really frustrating for all our service engineers to work remotly ....... Please Help

    Hi Santosh,
    which vesrion of sw u r running on WLC ?
    Open Caveats on 7.4.100.0, CSCuc78713 could be related to this;
    CSCuc78713
    Symptom: Wireless client cannot receive broadcast packets after broadcast key rotation.
    Conditions: Dynamic WEP; 7.0.235.0, 7.2.110.0, and 7.3.101.0 controller software releases.
    Workaround:
    • Executes the config advanced eap bcast-key-interval 86400 in the middle of the night
    • Change security setting to WPA2, and so on.
    Regards

  • Why does my phone disconnect after 4 hours of call time

    why does my phone disconnect after 4 hours of call time? Is there anyway I can change this?

    You mean that you're on a single call for 4 hours continously, and then it disconnects?
    If so, contact your wireless carrier.  That's a cellular connection issue.

Maybe you are looking for