Nokia 3710 - PC usb connection problem

I have the latest firmware on my 3710 and the settings on Connectivity are set USB Data Cable to PC Suite.
When I connect the USB Cable from my PC to the phone, my PC which runs Windows 7 Home Premium does not even recognized that there has been some kind of USB connection. Is my phone faulty?

Nokia doesn't supply USB cables with all its phones. So it may b the case. From where did u get that cable? And is it new or used? If its a Nokia Original & its not working then u can check the compatibility on the Nokia Website of ur region.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

  • NOKIA 5500 SPORT - USB Connectivity problems

    When connecting my 5500, the message "new hardware found", "portable device driver" and "NOKIA 5500 Sport" pops up all the time, I rpt: All the time..
    I am able to make a back-up, but I am not able to read dato in the nokia browser (liike contacts)..
    Can you help me ??
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Operativsystem:
    Microsoft Windows XP
    Bygg 2600
    Service Pack 2
    Språk: Norsk (bokmål)
    Språk for ikke-Unicode-programmer: Norsk (bokmål)
    Lokal: Norsk (bokmål)
    Inndataspråk: Norsk (bokmål)
    Nokia PC Suite:
    Versjon 6.83.14.1
    Språk: Norsk
    Connectivity Cable Drivers:
    Versjon 6.83.9.0
    PC Connectivity Solution:
    Versjon 7.7.10.0
    Microsoft Outlook:
    Versjon 11.0
    Bygg 8118

    Excuse my ignorance to NOKIA forums.. But what is "WPD loop posts" ??

  • Nokia N900 USB connection Problem

    Hi,
    Nokia N900 USB connection Problem.
    I am very embarrassed to admit this but.......
    I removed something (I cannot remember what) and now when I connect my Nokia N900 to my pc using the data cable it starts charging only.
    Previously I could choose between "mass storage" mode and "PC Suite" mode.
    Now I cannot access any files on my phone from my PC.
    can anyone help please?
    Thank you in advance.

    Problem Solved!!
    I had unckecked USB status menu in the powatool app.

  • After upgrade to ios 6 usb connection problems with car stereo

    Hi Everyone,
    after ios upgrade to ios6 i am not further able to use the iPhone 4s as music device - having usb connection problems ("not readable"). I am sure, that the upgrade ist the culprit; worked fine before. My car stereo is built in a Volvo XC 60; the device is connected via the standard usb cable by apple.
    Any Ideas?
    Thanks
    Ivo

    (same problem thread): see also https://discussions.apple.com/message/20185146#20185146 (not fixed)

  • N78 USB CONNECTIVITY PROBLEMS

    Hy guys,
    Since i've bought my N78 i've been able to connect the phone via cable only one time. After that, every time i've tryed to connect my n78 via cable my computer doesn't recognize my Phone.
    When I plug USB cable in one of the USB ports, Windows XP gives me back an error that says "USB devices not recognized - One or more devices connected to the computer has not worked correctly. Windows is not able to recognize it".
    I've reinstalled PC suite thousands of times,but nothing changes.
    My phone has the 12.046 software version. I know that there'e a newer version but how I can update it if my PC does not recognize the phone, and hence, PC suite is not able to connect to the phone.
    Many thanks for you help
    m

    you have another option in updating via Firmware Over The Air. you can do this by entering *#0000# in the standby screen and selecting Options > Check for updates. if an update is not available over NSU, then it may be on FOTA instead for your product code. this method of updating only takes about three to five minutes anyway. remember to do a hard reset (three-finger hard reset) after updating your phone to the new firmware.
    so you can probably update from 12.046 to 20.149 or 21.002. USB connectivity problems are probably due to problems with the USB cable or the computer, i have had no problems at all with USB connectivity in all the time i've had my N78, even under 12.046 firmware.
    let us know how it goes.
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • E66 usb connection problem

    Hello,
    i own a Nokia E66. Since i updated my phone i cannot connect it to the pc using the usb cable. There is a file in the phone called 2002aa97.sis and after the update it says that this file is corrupted. This file is responsible for the usb connection. Is there a way to download this file?? Or any other solution??
    Thanks in advance

    I have got exactly the same problem in Nokia E51.
    PC Suite 7.1.26.0; WinXP SP 3; HP 6730b; Nokia E51 (240.01) RM-244, firmware 300.34.56
    LChmiel
    Today: Nokia E51 (240.01) RM-244, firmware 300.34.56, PC Suite 7.1.30.9; WinXP SP3; HP 6730b

  • Ovi can't find Nokia N8 via USB connection, but Bl...

    I just bought my Nokia N8-00 a week ago along with my girlfriend who got her phone last Tuesday. We have both the same problem with Ovi Suite 3.0.0.284 is not recognizing the phone is connected to the computer with the USB-cable that came along with the phone.
    The computer discover the phone and add it in explorer with the USB-cable and charging works with no problem. So the cable can't be the source of the problem. It also seems like the phone recognizes that the Ovi Suite is running on the computer. The Bluetooth connection works with Ovi Suite, so I don't think the phones are the problem.
    Remember we have 2 similar phones bought from 2 different big dealers/chains and we have exactly the same problems with the USB-connection in Ovi Suite 3.0.0.284.
    I think this is a software issue with Ovi Suite. Have anybody tried a earlier version with Nokia N8 without this problem? The N8 model is rather new so maybe a earlier version of Ovi suite don't support N8...I don't know...
    Will be grateful for any response to this issue :-I

    Hi,
    I have the same problem running Vista and Ovi ver. 3.0.0.290. I ran through your steps but no change. It's a brand new N8 and the phone will not show as a New Device via the USB connection. Although configured to start when connecting the phone via USB, Ovi will not start so I assume the connection is not established between Ovi and the phone. My laptop sees the phone just fine and files can be transfered vie Explorer. Any other ideas? Much appreciated. 
    Thank you in advance!
    Screenshot attached.
    Attachments:
    OviUSB Connection Problem.jpg ‏31 KB

  • Nokia Music with 5800 Connection Problems

    Hi All,
    Trying to update music from my PC to my 5800XM with Nokia Music 1.2
    When I connect using the USB cable and I select any of the 4 connction options, it tells me that I have selected the wrong connection type, but not which type to select.
    I have to transfer the music manually either by removing the MicroSD and inserting into my laptop or via USB connection to my PC. This, of course, doesn't transfer the album covers, which is part of the reason for using Nokia Music.
    Also transferring MP4 movies doesn't work using Windows/not via OVI.
    Regards,
    Mark 

    dropping the phone would result in hardware damage and hardware damage would be obvious. cracked screen, phone constantly rebooting, etc etc.
    What i have problem with is this, let's suppose dropping the phone NEVER caused the underlying issue, nokia care can turn around and say, you dropped it, it's your fault, but what if it was not? how exactly does nokia prove otherwise, part of the testing of the phones is to test stuff like being dropped, why else do they have machines which simulate this? the fact is phones are supposed to take a little punishemnet, just because the phone shows signs of it being dropped should not auto matically qualifiy it to being void, plenty of other eletronics out there, torches, mp3, phones can take a beating much more than she did and anyone else and warrenty not be void, this is just a cheap excuse to make more money and not repair the phone.

  • Ovi Suite/ PC Suite USB Connection Problem

    I had  problem connecting the phone through USB selecting either PC Suite mode and Media Transfer mode, (the phone will display the USB logo beside the battery status for a few seconds if i select the modes mentioned above, then the logo will go missing as if no USB connection, can't browse the files through Windows Explorer and the Ovi Suite didn't detect the phone)
    however i can connect through Mass Storage mode and browse the mass storage and also view images in Image Transfer mode
    P.S. previously it is working normal, but today it started to act like that
    may i know what is the problem?

    Hi vakuuy
    Thank you for posting and welcome to Nokia forum! 
    To use your phone as a modem to connect a compatible PC to web.
    Install the Nokia Suite to your PC. The latest Nokia Suite includes the compatible drivers.
    Connect the data cable and select Connect PC to Web. The confirmation is displayed: Connect PC to web mode activated.
    When the necessary Windows software is installed to your PC, accept the installation. If asked, accept the connection as well and the internet browser of your PC will open. 
    Check the connection settings (Internet Access Point) from your phone for your PC. Select Web > Options > Settings > General > Access point.
    If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

  • Nokia 5800 XpressMusic USB Connection

    Hello!
    I'm having a little problem with my phone's USB connection. When I'm copying files from my PC to phone, it always disconnects at some point by itself. It seems like it disconnects, when it searches for mobile networks and always when someone calls me.
    I'm running all the latest software on my phone and PC (Windows Vista Service Pack 2 + all updates & newest Nokia firmware version [checked from both PC and through phone, reinstalled too] ). The drivers are freshly installed, so they should be newest too. Also, can someone please tell my, if I can turn on my LEDs, like flashlight?
    Thank you!

    Sorry for double post, but now I'm very sure, that it disconnects, when it searches for mobile networks.
    Always, when my speakers start to make noise, it disconnects and I have to re-connect it again.
    Sorry for bad english

  • Nokia c5-03 usb connecting error

    hi i have nokia c5-03.there is no memory card present in my phone.but when i connect my phone to pc through cable the erroe comes in there (memory card not present usb connection may not work as expected) anyone know what's the reason is this... plz help!

    Answered your question in the other forum mate.

  • Usb connectivity problems with 2330

    i was sold a ca-50 usb data cable to connect my phone to pc.  ive downloaded pc suite 7.1  and its just not working.  Any ideas?  Have I got wrong cable? Or do i need to change the settings on my phone?

    You have the Nokia 2330 classic? I don't think that model has a usb connection other than a special connection to use for Nokia care points.

  • Nokia C2-00 USB Modem Problem

    Dear Sir,
     I am using Nokia C2-00 (Dual Sim). I connected this device with my pc through usb data cable.
     Now in device manager it is shown as Nokia C2-00 USB Modem # 2 on port 15.
     I am using Microsoft Communications Control Version 6.0 to send messages.
     All other nokia mobile sets send sms through abvoe control perfectly but when I attach Nokia c2-00 then no message is sent to mobile.
     I want to ask should I change some settings in nokia c2-00 or there is another software to install in my pc.
     I am using following softwares
    Nokia Suite 3.2.100
    Nokia PC Suite 7.1.180.94
    PC Connectivity Solution 12.0.27.0
    Connectivity Cable Driver 7.1.78.0
    Maps Service API 4.0.29.0
    Nokia nPlatform 3.2.100.0
    Detected USB drivers:
    - Default Hub Driver for USB 6.1.7600.16385
    - USB Modem Driver 6.1.7601.17514
    - EHCI eUSB Miniport Driver 6.1.7601.17514
    Please help

    tqmd1 wrote:
    Dear Sir,
     I am using Nokia C2-00 (Dual Sim). I connected this device with my pc through usb data cable.
     Now in device manager it is shown as Nokia C2-00 USB Modem # 2 on port 15.
     I am using Microsoft Communications Control Version 6.0 to send messages.
     All other nokia mobile sets send sms through abvoe control perfectly but when I attach Nokia c2-00 then no message is sent to mobile.
     I want to ask should I change some settings in nokia c2-00 or there is another software to install in my pc.
     I am using following softwares
    Nokia Suite 3.2.100
    Nokia PC Suite 7.1.180.94
    PC Connectivity Solution 12.0.27.0
    Connectivity Cable Driver 7.1.78.0
    Maps Service API 4.0.29.0
    Nokia nPlatform 3.2.100.0
    Detected USB drivers:
    - Default Hub Driver for USB 6.1.7600.16385
    - USB Modem Driver 6.1.7601.17514
    - EHCI eUSB Miniport Driver 6.1.7601.17514
    Please help
    With regard to modem issue, can you tell us more what's the exact concern? Do you encounter any error message? Are you using Nokia Suite or Nokia PC Suite to do this? 
    When you send messages or connect to the internet, Nokia Suite uses the SIM card that is in the internal SIM card holder of the phone. This card goes by the name of SIM1, unless you have renamed it. To send a message or create an internet connection with the other SIM card, swap the SIM cards in your phone.
    Hope this helps. 

  • Acura USB Connection Problems After iOS 8.2 Update

    I have a 2014 Acura MDX and prior to the iOS 8.2 update, I could play music either via Bluetooth or the USB connection through the iPod "source" (though the USV connection had far superior sound).  After the update, the USB connection doesn't work anymore. Same cables used and the iPhone picks up a charge so it is not a bad connection. Anyone else having the same issue?

    this happens also to me. Opel Astra / GM version in Europe.
    8.2 totally killed audio via USB cable. Connecting results in "no supported audio files found"

  • USB connection problem

    Whenever I connect my tab to any PC or laptop with the help of USB cable, it doesn't get connected. It doesn't show pop up window regarding USB connection. USB slot is working very well. Tab gets charged through it well. Functional trouble it is. Will anybody solve it ?

    Hello, and Welcome to the HP Support Community! Need a few details. Which tablet are you asking about? What OS is on your PC? Tried another cable? Usual suggestion is to disconnect the devices, and reboot both the computer and the tablet.  Check the settings on the tablet in Settings/Storage/ <options icon, top right corner - looks like 3 blocks stacked vertically>/ USB computer connection. See if MTP is checked.  It should be for transfer of all file types.  Connect the devices.  If still no joy, try unchecking MTP and try PTP.  This should make the tablet appear as a Camera.   I had to do this with an old Win XP computer to get it to "wake up" and make the connection.  I then switched back to MTP and all was good! WyreNut

Maybe you are looking for

  • EchoSign iOS 2.2.0 is Available on Apple Store

    I wanted to continue to keep the community updated on some of the new product innovations we're delivering. EchoSign 2.2.0 is now available for download on Apple Store. Highlights of the release Supports documents with calculated fields, online or of

  • AppleScript Event Handler Error

    While running iChat, I wanted to have notifications show up when some of my buddies log on so I don't have to guess who it was that logged on. I set for an AppleScript to run when buddies are available to Auto Accept.applescript and I get error -1708

  • Hibernate creating Dynamic Mapping File

    Hi All, I am supposed to create the Mapping Hbm file dynamically at run time. I learnt that this can be acheived from a Java class file using Xdoclets. But in my case i have to do it from a Xml File. Can this done by xdoclets or anything else? Parsin

  • Icon Problem on Windows 7

    I recently tried to virtualize AutoIt3 and although everything works, the icon isn't working right. Although the icon in Windows Explorer appears correctly, when running the vApp, it appears in the Windows taskbar with no icon. Any thoughts?

  • After Effects CS5 crashing when I try to make a new comp

    First it was crashing when I imported files, now I fixed that but it's crashing when I try to make a new comp (may affect other things too, that's just what I noticed). It was working fine for 3+ months until now and I haven't had anyway software or