Nokia 520 restarts with SD card after Amber

hi
My Nokia 520 restarts with a SD card inserted. I have used a Sandisk 16Gb and then a Samsung class 10 card.
The issue was not present before the Amber update !!
Could anyone who has experienced a similar issue suggest a solution ?
thanks
ran

hi
thanks for the answer. Actually the Italia Nokia support suggests to use class 10 cards and specifically Nokia cards. The Sandisk website also suggest to use only certain models of SD cards and all of them are class 10. The first SD card i have used is a Sandisk and it is not a class 10, maybe a class 6. I saw that lots of users are affected by this issue and i would like to know how they solved (if they did).
ran

Similar Messages

8110 shutting off, dropping calls, restarting with "media card removed" error message

we have a brand new AT&T red pearl 8110, OS v4.5. We have not loaded any applications on the phone, and we do not have a media card installed. Several times now the phone just shuts off, then restarts itself. this even happens during the middle of a phone call. It is my wifes phone so i cannot give any more specifics, but she says she has noted now that it says something like "media card removed" right before it shuts off, then the white screen comes with the hourglass of death, then it verifies security settings and is back to "normal". Any ideas? I am within the 30 day window ot return, but figure this must be a fixable problem (or am hoping so). Thanks!

My BB pearl started by doing the same thing. For the past month or so it has randomly been doing this. Today it has been shutting down then rebooting and 10 seconds after it reboots it does it again. I had to call T mobile and they are sending out a replacement. I cant even retrieve my contacts.

Lumia 520 : No new features added after amber upda...

I updated my Lumia 520 through OTA. After the process I could not find any new features and the about section does not show "Amber".
What should I do?

The 'Amber' version is found in Settings > extras+info and make sure you get the additional apps required which you can all find HERE
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Problems with SD Card After Reboot

Hi, I formatted my SD Card through my Xperia Z3 with Lollipop.I erased all data from Spotify, included the folder spotify.music.Installed the Spotify again with the SD Card connected and all worked fine.I did download from all my albuns, and verified on File Commander, and all data were in SD Card. The problem-->>>After reboot the phone the SD Card isn´t recognized.I did all procedure again, and all return to work, but every time that I reboot the phone, I have to do do all these again. I tested format the SD Card and reboot my phone many times, and it´s all right.It´s necessary only a logon Spotify and the next reboot the SD Card don´t read more. Please, can you help? Thanks a lot!!!

Hi Spotify Family, My problem was resolved.I changed my SD. After was 128GB Ultra SandiskNow 32GB normal Sandisk -> http://www.bslive.com.br/acessorios-informatica/149-cart%C3%A3o-de-mem%C3%B3ria-32gb.html Remember that you have to erase all cache and uninstall the Spotify again before input the new SD Card. Good Luck for All

Problems with TV - Card after Kernel Upgrade

Hi Folks,
since the last Kernel Upgrade I've got problems with my tv tuner card. Since ever I had to set the tuner manually to 38. But now it seems that its not enough just to set this type.
I used this script to set up my card correctly:
modprobe -r cx88-dvb cx88-blackbird cx8802 cx88-alsa cx8800 cx88xx
modprobe cx88xx tuner=38
modprobe cx8800
Now I've got weired sound and only a few stations, with a very poor picture quality. After reloading the modules with the script dmesg says:
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type 38, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
From my (limited) point of view the problem is, that tuner-simple does not loads the correct tuner type? I've looked into modinfo from tuner-simple but there is no parameter for type... What else could be the problem?
Thanks in advance
Badcel

Hi cjpembo,
my Card looks like:
01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
If I don't specify any module parameters, the tuner type 0 is selected.
ACPI: PCI interrupt for device 0000:01:07.0 disabled
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
Badcel
Last edited by badcel (2008-08-24 09:46:18)

Lenovo Ideacentre K410 won't boot with video card after OS crash and refresh

I purchased a Lenovo Ideacentre K410 from Fry's some time ago. It came with Windows 8. I added a GeForceGTX650. Everything ran fine until yesterday, when the system black-screened in the middle of a Windows 8 update. The update was running from the control panel. After the black screen, I finally got the system to boot again by removing the video card. Even then it said the OS was messed up and offered to refresh it. I allowed it to refresh the OS. Now Windows 8 boots, but not if I put the video card back in. Thanks!

Hi macaria,
Welcome to Lenovo Community Forums!
It might be that the Video Card is Bad that caused the Crash,
The system prompt you for a repair since it was not turned OFF properly when the computer Crashed.
Have the GPU Card tested on another computer or try a different GPU on your system.
Regards
Solid Cruver

Nokia 603 problem with headset audio after updatin...

Nokia 603-White
Prior belle fp2 sound was working fine, after updating to belle fp2 headset sound turns too noisy, reinstalling update is of no use as i came to know that these update actually update the rom better to patched ROM. Once you have a buggy update it is hard to fix it by updating, The only solution i see is the BOX Flushing. I am pretty sure this is a software issue, as i have tried different headset and also changed the audio jack. Visiting the Nokia care is a pathetic experience. I already visited once, they charged me for doing nothing, when my cell was in warantee period. Cell was returned as it was. I don't believe on nokia anymore, i am expecting someone can help me in this situation.

It can be the same issue, as there are actually two microswitches in there: one for diverting analog output from the speakers to the phones, and another one for switching analog to digital when a TOSlink cable is plugged in.
Do you see a red dot of light way in the back? If yes, then the jack got switched to digital mode.

Low FPS with nVidia card after updating to OS X 10.4.3

I know this question has been asked before, but I can't find an answer anywhere...
Is there an easy fix to this problem (i.e. not re-installing the OS)?
Has apple said anything about this issue?
Is there a way to install the old drivers for the nVidia card?
Thanks for your help!
Dual 1.25 GHz G4 Mac OS X (10.4.3) GeForce4 Ti 4600

Dear keg55 try to answer the points you (sorry for my bad English, I'm from Russia):
- +5V voltage is present on the USB-ports.
- After the operating system is not working only the mouse and keyboard, but after sending the computer into sleep mode (press on / off) ports are included. To enable the ports necessary every time you reboot go into sleep mode.
- To reinstall your operating system from the MAS result does not. After reinstalling the bug persists.

Connectivity issues with AE card after v4.2 update on 10.3.9

Teach me not to read up on updates before installing them, though I suppose I shouldn't have to....grr. Stupid lack of quality control.
Anyway, I have a 1.25ghz PB running os 10.3.9, and my network was running just fine before I installed the update. Afterward, when I opened up Safari, I had full, fast connectivity for about 15 minutes. Then certain sites, like the MacAddict forums and Yahoo, simply refused to open (they timed out), and several others would take five or six tries to get through (all other tries would time out) Some sites would open consistently, but the vast majority of those I could even contact would not load properly or completely. Most would either not load graphics, hang midway through the transfer, or never reach 100%
Oddly, my connectivity through other non-web ports (AIM, bittorrent) seems unaffected.
My wired ethernet capability is still fine as well, no problems with any browser, so long as I'm plugged in (to the netgear router at the moment).
This same problem occurs with Safari, Mozilla and IE (yeah, I even tried IE) So I doubt it's the Safari 1.3.1 update that I installed at the same time.
It also occurs on both an AEBS and a Netgear WGR614, so it's not a matter of the AEBS firmware.
I've tried rebooting, resetting, reinstalling the 4.2 software from the standalone package, reinputting my network settings, deleting pref files, etc. All to no avail.
If anyone has any clue what's going on, I would much appreciate the help.

Sadly I don't have answers either. I'm not sure what happened but as of the last few days i've been having the same problems. There are also times when my mac mini wont even connect to the base station.
What I find strange is that my sister has the same airport firmware installed and her machine is unaffected. I'm on hold with apple atm, so we shall see what they can figure out.

My iphone 4G restaet with redflashing screen after that i am try to turn on but dose not work

Dear All:
My iphone 4G GSM restart with redflash screen after that i have try to turn it on , but dose not work , still black screen ( dead)
Best Regards

Yes Mate I had connected to computer

Using Automator to open a program with a delay after a programmed restart

Hi to all! With my old PowerPc I used to start unattended sessions of my Newsreader (Unison) overnight simply putting Unison in my Login elements window, and programming a restart at a fixed hour. Unfortunately, with my very fast new iMac this doesn't work: Unison opens too fast after the programmed restart, before a network connection has been established, and Unison is unable to see the NewsServer online when it starts (error "nodelist not found", typical of a not yet established Internet connection). Note that I downgrade to Unison 1.8.x to do this, as the Unison 2.x program cannot be closed with a session running to resume it after start: it simply defaults to "Pause transfers" after quitting, and need a clic on "Resume" after reopening.
Obviously, what I need is to introduce a "wait (say) 2 minutes before the opening of Unison", or anything that can check the Internet connection before Unison starts. May anyone instruct me to do this with Automator and/or AppleScript?
In fact, I tried to generate a workflow in Automator, with a Pause after the start of the process, then the instruction to open Unison. I put the saved workflow in my Login elements, but it didn't work on my iMac 27, i7Core, Snow Leopard installed. I added an "execute workflow" at beginning of the process, but the Pause command gives always an error and the process stops before Unison' opening.
Any suggestion or help in writing an Automator or AppleScript workflow/script to be put among the startup items?
Thanks a lot!

I am trying to use Automator to restart an application. I figured how to quit the application, however when I relaunch it, it asks for password permission... how can I use automator to enter the password? or is there a way to launch the software with password in a script?

HT201407 Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help

Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help

Is the SIM from the carrier the device is locked to?
Has the device ever been hacked or jailbroken?
Have you tried simply removing and re-installing the SIM? What about replacing the SIM?

Yoga 13 SDXC Card Shutsdown Computer and it cannot restart with card installed

Hi,
I have read on the forum that people are using the SDXC cards with their Yoga 13's.
I have purchased a Sandisk 64Gb SDXC ExtremePro card but when I put it into the Card Reader a blue screen comes up saying " Your PC ran into a problem and needs to restart." It also gives and error with this message saying: PAGE_FAULT_IN_NONPAGED_AREA (TosExt.Sys). It cannot restart again until I remove the card, the same thing happens in SAFE MODE also or if I try to start the computer with the card inserted already. The card is brand new and I bought it in a reputable shop. I have tested the card in a Lenovo ThinkPad X230 and it works fine. I have also tried to insert a different standard SD card into the Yoga but the same thing happens. I have reinstalled the driver for the reader but the problem still remains. The OS is Windows 8 64 bit. The card is in ex FAT format and I re-formatted it again just to be safe but still no luck.
I was not able to find anything regarding this online but saw that some people here have similar problems.
I would really appreciate if someone could help or at least let me know if there is a way of contacting Lenovo about this problem, I see that they will only accept emails regarding the ThinkPad product line.
Thank you in advance and best regards to all!

I have also problems while inserting a sdcard but not on a Lenovo. I just give here what I observed but I have no direct solution
1. I bought last year a Samsung chronos and it was impossible to put a sd card. Each time I get the blue screen with the message page_fault_in_non_paged_area (tosExt.sys). When I contacted Samsung they of course do not understand and suggest that I reinitilize completely the computer which I did. At this moment it was possible to insert a sd card without problem but as soon as I have installed my usual sotfwares it came back to the same situation : impossible to put a sd card.
2. I bought meanwhile a second computer, an Asus Zen book, and got exactly the same problem. Both computer are operated under windows 8 but the upgrade 8.1 does not change anything.
3. the only way I can read a sd card in both these computers is to use a USB adaptor. In this case there is no problem.
4. I recently bought a Yoga pro 2 from Lenovo. Surprinsingly with the same kind of sofware installed, I can use directly a sd card.
This seems to be a tricky problem

Sim problems- I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

arun kumar chenna123 wrote:
i have updated my iphone to ios4.1. after installation, it is showing as"The SIM card inserted in this iPhone does not appear to be supported. only compatible sim cards from a supported carrier may be used to activate iphone. Please insert the sim card that came with your iphone...."
how to solve this problem. I don't have any sim cards that came with iphone.
Please help out to solve this problem.
It sounds like the phone was hacked or jailbroken, and updating it locked it to the original carrier. As it is not possible to update to any version other than the current one (5.1) the fact that you updated to 4.1 pretty much confirms the phone was hacked. There is no solution that you can get in an Apple forum.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Nokia 520 restarts with SD card after Amber

Similar Messages

Maybe you are looking for