Nokia 5230 - using it with the car speaker

i possible to use the nokia 5230 with my car speaker. I want to use my phone on the car speaker, while driving. I am able to use aux to connect the nokia to my mp3player in the car, but i cant seems to use it on the voice calls. (it works fine if i use it to play mp3 on the phone)
is there any instruction how to use Nokia5230 with car speaker system?

The phone would work connected by a 3.5 to 3.5 lead in as much as if you received a call whilst connected the music would stop and you would hear the caller through the car speakers, but you would still have to use the mike on the phone to speak to the caller . You need a bluetooth car kit to use it for calls properly. A work arround would be to use a splitter lead (one 3.5 extender with 2 inputs) then plug your phone into both a wired headset and the cars auxiliary input ! But doing this would mean a lot of wires !!!
http://www.amazon.co.uk/3-5mm-Audio-Headphone-Splitter-Cable/dp/B002NPSTNU
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology.

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology. Is there a fix for the iPhone 5 to allow call pickup via the Acura?
Thanks

HI Friend,
Probably the problem it is because your iPhone 4 and your car have the same Bluetooth technology ( 2.1 ), but iPhone 5 has new Bluetooth technology ( 4.0 ).
http://www.apple.com/iphone/compare-iphones/

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

My Nokia 5230 has not showing the Photos and video...

My Nokia 5230 has not showing the Photos and videos(from Memory Card) in gallery. and Music library has not updating. Please send me the solution.

It has been released 3.3 version of NS which is working fine with Thunderbird
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

Help using Shuffle in the car

I actually have a couple of questions, all related to the SHuffle I bought a week ago. I primarily want to use this in the car, using my car stereo speakers as I was doing with my iPod and Belkin FM transmitter (before my wife commandeered the "main" iPod as our home stereo!). Problem is the transmitter that works for the iPod has a different kind of plug (twi different "male" parts) than the Shuffle (only one prong)> So I bought the Belkin cassette adapter at the same time as the Shuffle. That worked beautifully the first time I used it; after that, everytime I put it in the cassette deck, the cassette deck ejected it after trying to "play" the cassette. I'd appreciate any suggestions on this; I already returned the Belkin cassette adapter to the store. Has anybody had this problem with the "Monster" adapter advertised on this website? It's so easy to use the iPod in the car; I never imagined it would be so hard to do the same with the Shuffle!
Also, when I tried to get "support agent chat" on this website, and entered my Shuffle's serial number, I was told that my iPod was purchased in March, 05, and so I wasn't eligible for support! (I bought it last week.) Any suggestions there?
Thanks for any comments, docjohn

I use a cassette adpater with the shuffle all the time.. in two different cars
usually when im driving to and from work, or jsut around town
no problems there
the apple store online sells a second FM transmitter that is only a single mini plug and is battery operated (and will thus work with any item that has a mini jack on it example: your computer)
try that...yes the fm transmitters for the ipod and ipod mini will not work witht he shuffle because they use the ipod and mini ipod's extension port to draw power.
hope this helped
as for your tape ejecting...beats me
I have a 1990 corolla so its not smart enough to eject a tape...maybe your car stereo knows its not a real tape :P

I have a problem with the phone speaker

I started yesterday to have a problem with the phone speaker, I cant hear anything when using the normal speacker, but its ok when using the loud speaker. I dont know what happened. its not working nether with phone calls nor calling apps such as viber

If you have a docking station try putting it on there. I lost my sounds, docked it and they came back immediately.

Can an iPhone 4 use bluetooth in the car?

Can an iPhone 4 use bluetooth in the car?

NightNinjaPDX wrote:
No I wish, I have a Mustang
Hey, nothing wrong with that. My first car was a Mustang. I loved it.

I purchased songs from 2 different computers using itunes with the same apple id. I had 1 iPod I used for these but I just recently got an iPhone and I was wondering why it wasn't letting me put my purchased songs on my iPhone?

I purchased songs from 2 different computers using itunes with the same apple id. I had 1 iPod I used for these but I just recently got an iPhone and I was wondering why it wasn't letting me put my purchased songs on my iPhone?

You can transfer iTunes content from an iTunes library on a single computer only.
Since these songs were purchased with the same iTunes account, you can download the song that is not in your iTunes library on the computer you will be syncing your iPhone with. Or you can download the song or songs direct on your iPhone.
http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

Can I purchase an iphone3g and then use it with the apple golf app as a golf gps without having to be on a cell plan or data plan?

If I purchase an iPhone 3g, can I then use it with the apple golf app without having cell or data service?

You do not need have cell service for the GPS to work.
If the iphone is new, then you would have to activate it with a carrier in order for it to work at all.
If it is used, then you can use it without wireless service:
Using an iPhone without a wireless service plan

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

I have purchased a eos 6d. When I use it with the iPhone app the connection dies after about five m

I have a 6d and when I use it with the iPhone app the camera turns off after about five minutes and the connection is lost. So when I am photographing wild life I keep having to break cover to reactivate the connection. Is this correct or is there a way to keep the connection alive.

You just need to go into the menu and set the camera's sleep mode to "off" or "never". It sounds as if it's currently set to 5 minutes.
Letting the camera sit active continuously, i.e. preventing it from going into sleep mode, will drain the battery(ies) a lot faster. I don't have a 6D, nor do I leave them on full time (in fact I set sleep mode to a very short duration, since tapping any button on the camera quickly re-awakens it).... so I really don't know how quickly a battery will drain. But you might be prepared with spares. If battery life is too short for you purposes, you could add a battery grip which will double the battery capacity.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

TS1702 I bought the megallan road gps I can't use it in the car on the road why what do I need to do

I bought the Magellan road gps can't use while in the car what do I need to do while in car traveling

Which model of the iPad do you have ? Only the 3G/4G models have a built-in GPS chip, if you have the wifi-only model then you will need an external GPS for it.

I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

Nokia 5230 - using it with the car speaker

Similar Messages

Maybe you are looking for