Nokia 5233 messages lost after phone restart

Hi,
I'm having a weird problem with my nokia 5233.  It happened to me twice now that after restarting the device, I would lose all of my messages including messages in my folders and drafts and even sent messages.  I have opted to save all my messages in my memory card, which is Kingston 4GB. What might be causing the problem and if I can recover my messages, as I have very important messages in there..........And if there is any solution on preventing this catastrophe again................
Thanks
Iftikhar

This seems to be a common issue with the S60 mobile operating system.  No comment from Nokia regarding a resolution so far.
My E75 phone has also experienced the disappearing-messages-act saved in my SD card when my phone restarted from a low battery shut down.  Inbox/Draft/Sent Items were completely wiped out.
I tried to change the SMS location from SD Card to Phone Memory then back to SD Card again.
I also tried to (safely & properly) remove the SD Card then reinserted it back.  Still no go.
The worst part is that I spent 3 days searching the Internet and found that it's not rare for this problem to occur on an S60 platform yet no resolution from the web nor does Nokia offer any solution to it's customers.
They're about to lose a 12 year loyal and solid Nokia Fan (along with his friends and relatives to migrate to the Blackberry & iPhone Bandwagon) soon if they can't help us retrieve the important messages that was wiped out from our inbox. <sigh>..
Pictures and all other files stored in the SD Card are still intact.  It's just my 3,000++ important SMS that's wiped out.

Similar Messages

  • JMS Messages lost after server restart

    Hi All,
    We have an environment where Oracle SOA 11g is configured to use Weblogic JMS (Database persistence). The JDBC stores have been created to hold the persistent JMS messages. However we have observed that after server restart the messages are getting lost from the queue (non consumed messages as well).
    Is there any configuration which we are missing?
    Regards
    Subhankar

    Hello Subhankar,
    Which Weblogic version are you using? What are the configuration parameters of the JMS queue you defined? During server shutdown/restart, do you see any errors in the server log?
    I would suggest you to raise a case with support as it may require an inspection of your environment and settings to find out the root cause.
    Regards,
    Anuj

  • Nokia 5233 messaging problem

    I hav amonth old nokia 5233 ,whenever i message more than 3-4 people it gets very slow......during that time i cant open another application.......
    Is this problem with all nokia 5233 or my cell has a problem?
    plz help....

    hey dude see that which memory are you taking in use..........
    if u are using memory card than it will take as usual long time which is as said ur problem......but if u use phone memory as primary memory in case of messaging thn it wont take long time.................
    the same was the problem for me nd followed the same nd it worked............

  • Plz plz help nokia 5233 half display after update

    i,ve nokia 5233 update in my mobile device with GPRS internet software version v21.1.004(7mb file)and it got half display after updaTE…
    any soloution for that.. i update with latest version….
    i also try with Nokia Software Updater in my pc and update again software version v21.1.004(120 mb file).
    i also try set format(green button+red button+cemera button+set on) but problem is any budy ve any idea so plz
    i also try fectory reset.but prob is still.any budy ve any idea so plz plz .
    Solved!
    Go to Solution.

    There have been reported some issues with the 5800 similar to yours, and it seems that the devices affected were devices where the enduser had changed the screen to an non-official one, and after the update the screen was not working like it should.
    If you have done a non-official warranty voiding screen change to your device (yourself that would mean), youre for your self.
    If that isn't the case, I'm sure it isn't, you will have to seek help at a Nokia care point if you've already done what you've written. The hard reset should wipe your phone memory and set your phone back to "basics". - No need of doing the factory reset move after doing a hard reset as it does less than the hard reset and nothing that the hard reset hasn't done.
    Now it seems like you've updated through ota first and then tried to reinstall the fw again. then done a hard reset? - You will need to take it to a Nokia care point as there nothing more we can do for you.
    There could be a hardware issue which has just occured at the same time doing the update.
    Clicking the "contact us" tab at the top right of this page will lead you to the nearest care point!
    Cheers!

  • Missing clock widget after phone restart

    Hi. After restarting my Z3 phone clock widget (preinstalled) vanish from homescreen and it isn't available from widget pickery What should I do to get them back?
    Each end is happy. And if is not happy, it's not the end.

    I have disabled apps, but none is related to clock widget. Disabled e.g.: google drive, dynamic wallpapers, evernote, chrome... But nothing with clock. It worked fine till my first phone restart (11 days since buying)
    Each end is happy. And if is not happy, it's not the end.

  • Message lost after rollback

    I have three queues setup. A Base queue, Backout queue and a Hold queue.
    A test application reads from Base queue and rollback() the session. After attempting to deliver the message two times, the JMS application sends the message to Backout queue after the third rollback().
    My application (MsgRequeueApp) reads the message from Backout queue and waits for some time, adds some headers for its own use, sends the message again to Base Queue. The test application reads the re-queued message and rollback() three times. At the end of the third rollback(), the message is lost. I was expecting the message to go back to Backout Queue.
    1. MsgRequeueApp does not log any new messages. So, it is not reading any new message.
    2. I am monitoring the queues from weblogic's Admin console. The message is not present in Base Queue / Backout queue / Hold queue.
    Note: There is a different logic that would send messages to Hold queue. But I am not testing that right now.
    Here is the log after I enabled logging (Headers, Body)
    ####<Feb 4, 2013 10:56:31 AM CST> <> <> <1359996991531> <116727> <> <> <SystemModule-0!TESTBOQ> <ConsumerCreate> <<anonymous>> <MC:CA(local):OAMI(DefaultServer.jms.connection19.session20.consumer22)> <> <>
    ####<Feb 4, 2013 10:56:31 AM CST> <> <> <1359996991552> <840437> <> <> <SystemModule-0!TESTBASEQ> <ConsumerCreate> <<anonymous>> <MC:CA(local):OAMI(DefaultServer.jms.connection23.session24.consumer26)> <> <>
    ####<Feb 4, 2013 11:05:11 AM CST> <BEA1-00037A05C5399E472B1E-574C53746F72655F44656661756C74446F6D61696E5F46696C6553746F72652D30> <> <1359997511266> <249265> <ID:<237345.1359997510782.0>> <> <SystemModule-0!TESTBASEQ> <Produced> <<anonymous>> <> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;false&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997510782&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:22 AM CST> <> <> <1359997522152> <866698> <ID:<237345.1359997510782.0>> <> <SystemModule-0!TESTBASEQ> <Retry exceeded> <<WLS Kernel>> <> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;true&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997510782&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:22 AM CST> <> <> <1359997522152> <885695> <ID:<237345.1359997510782.0>> <> <SystemModule-0!TESTBOQ> <Produced> <<WLS Kernel>> <> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;false&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997510782&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:31 AM CST> <BEA1-00077A05C5399E472B1E-574C53746F72655F44656661756C74446F6D61696E5F46696C6553746F72652D30> <> <1359997531207> <716965> <ID:<237345.1359997530728.0>> <> <SystemModule-0!TESTBASEQ> <Produced> <<anonymous>> <> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;false&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997530728&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:31 AM CST> <BEA1-00027A05C5399E472B1E-574C53746F72655F44656661756C74446F6D61696E5F46696C6553746F72652D30> <> <1359997531209> <972000> <ID:<237345.1359997510782.0>> <> <SystemModule-0!TESTBOQ> <Consumed> <<anonymous>> <MC:CA(local):OAMI(DefaultServer.jms.connection19.session20.consumer22)> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;false&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997510782&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:41 AM CST> <> <> <1359997541259> <230216> <ID:<237345.1359997530728.0>> <> <SystemModule-0!TESTBASEQ> <Retry exceeded> <<WLS Kernel>> <> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;true&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997530728&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:41 AM CST> <> <> <1359997541259> <250889> <ID:<237345.1359997530728.0>> <> <SystemModule-0!TESTBOQ> <Produced> <<WLS Kernel>> <> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;false&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997530728&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    ####<Feb 4, 2013 11:05:41 AM CST> <BEA1-000A7A05C5399E472B1E-574C53746F72655F44656661756C74446F6D61696E5F46696C6553746F72652D30> <> <1359997541304> <943009> <ID:<237345.1359997530728.0>> <> <SystemModule-0!TESTBOQ> <Consumed> <<anonymous>> <MC:CA(local):OAMI(DefaultServer.jms.connection19.session20.consumer22)> <&lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mes:WLJMSMessage xmlns:mes="http://www.bea.com/WLS/JMS/Message"&gt;&lt;mes:Header&gt;&lt;mes:JMSDeliveryMode&gt;PERSISTENT&lt;/mes:JMSDeliveryMode&gt;&lt;mes:JMSExpiration&gt;0&lt;/mes:JMSExpiration&gt;&lt;mes:JMSPriority&gt;4&lt;/mes:JMSPriority&gt;&lt;mes:JMSRedelivered&gt;false&lt;/mes:JMSRedelivered&gt;&lt;mes:JMSTimestamp&gt;1359997530728&lt;/mes:JMSTimestamp&gt;&lt;mes:Properties/&gt;&lt;/mes:Header&gt;&lt;mes:Body&gt;&lt;mes:Text&gt;TestCase1&lt;/mes:Text&gt;&lt;/mes:Body&gt;&lt;/mes:WLJMSMessage&gt;> <>
    Can someone help me figure out how I can debug what is going wrong here?

    Do you have a redelivery limit set on the producer or the destination? If you do, a message may be discarded once the limit is reached depends on your delivery-failure-params on the destination. You can configure to have the messages put into an error destination once they reach their redelivery limit.

  • Content Lost after Portal restart

    Hi Guys,
    i have installed a EP 7.0 with SPS14. i Created some content (roles, Iviews, Themese etc.) But after restarting the portal everything is lost. Also i deployed SPS 16 after restart components are on SPS 14 again.
    Did someone ever noticed such a behaviour?
    best regards,
    Kai

    hi!
    Here you go with Release notes for nw2004~
    http://help.sap.com/saphelp_nw04/helpdata/en/44/50c12c97c01193e10000000a155369/frameset.htm
    for installation etc - go here-
    https://websmp207.sap-ag.de/instguides ->SAP NetWever

  • Messages missing after phone replaced in iPhone 5 + iOS 7

    Hi,
    I recently got my iPhone 5 replaced from the service center. After that I am not able to access my older messages. When I checked the icloud drive, I can see that a new device has been created for my fresh piece. I have used the newer device for sometime now, so, there is data on this also. I think "Restore and Reset Data" might help me get the data from my older phone?
    All I need are the messages from my older phone that is on the icloud backup. Can anyone please help?
    Thanks,
    Arka.

    Hey arkafrommumbai,
    Thanks for the question. It sounds like you have received a new replacement iPhone and would like to restore it with the backup of your previous device. The following resource should assist you in doing so (simply skip to the “Set up your new device” section and proceed):
    Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/ht2109
    Thanks,
    Matt M.

  • SnapDrive transport protocol settings lost after service restart.

    Hi everyone,
    On one of our SQL Servers we have SnapDrive v.6.4.2, OS is Windows Server 2008 SP2, the server is in a workgroup, not in a AD Domain.
    In SnapDrive transport protocol settings we have a storage system defined and everything works fine, but after restarting the SnapDrive service (mostly because of a server restart) the storage settings disappear (the storage system is no longer defined) and SnapDrive cannot see the VMDK LUNs, therefore SnapManager cannot take SQL Server backups.
    Any help or suggestions regarding a solution to this problem will be greatly appreciated.
    Regards,
    Sezgin

    I am experiencing the same issue and the OS is Windows server 2003 SP2.  Even after adding the transport protocol settings I dont see LUNs getting displayed.

  • Messages lost after rebuilding mailbox

    Inbox had a message that said it was damaged --rebuilt as suggested and then each message in it said that it had not yet been downloaded from the server. Tried rebuilding it again and now all of the messages are gone. Then tried importing inbox.mbox which produced a selection of email that did not resemble the original inbox.
    Are my original inbox messages retreivable?

    No, it isn't clear. I still don't know what does "I attempted to import files from it (unsuccessfully)" mean, nor what does "I then tried to reconstruct the inbox from the mac back up" mean. These statements are too vague.
    The only items within an *.mbox folder used by Mail 2.x are Info.plist and the Messages folder. Any other files you may see there are almost certainly Mail 1.x files that Mail 2.x leaves there after the conversion. This is poorly explained in Mac OS X 10.4 Mail: Some mailbox files used by Mac OS X 10.3 are not deleted after importing. The article only talks about mailboxes in ~/Library/Mail/Mailboxes/, but the same could also be said about mailboxes in any of the "POP-" account folders.
    As long as you keep a backup copy of the old files for a while (at least, until you're sure everything was converted properly), they can safely be removed from the Mail folder. OnyX has a Cleaning > Misc Options > Temporary and obsolete items option for getting rid of all those files.
    Note that if you see strangely-named Messages-T0x... folders, these aren't old files from previous versions of Mail, but rather an indication that there is something amiss. More specifically, these are temporary folders created by Mail 2.x during an import or a reindexing process (e.g. rebuilding a mailbox) that Mail should have deleted when done. Their presence is a clear indication that something didn't work as expected.
    Importing a mailbox that still has the old files there would produce different results depending on how you try to import it. Importing it as Other, for example, would cause Mail to look at the old mbox file only, ignoring everything else, which almost certainly is not what you want.
    In order to import the current mailbox contents, you must first move all the *.emlx files out of the Messages-T0x... folders and into Messages proper, then get rid of the (now empty) Messages-T0x... folders. In Mail, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions. Note that Mail wants you to select the folder that contains the mailbox to be imported, not the *.mbox folder itself.

  • Wireless keyboard name does not stick, connection lost after reboot/restart

    I know this topic has been addressed many times but I might have additional info to this.
    I tried to rename my wireless keyboard. The name stays as long as I only let the computer sleep.
    As soon as I do a restart/reboot and the connection is lost again, it's name is set back to the old name.
    This might be related to the reason why it looses it's connection over and over again.
    Does anyone know where this "name" is stored? There must be a plist file or something somewhere where the name is kept, maybe that's the file which is corrupt and must be deleted.
    I also was wondering if it is possible to "reboot" the keyboard itself, maybe this setting is stored on the keyboard itself and it cannot properly maintain it.. that might be a reason why for some users the keyboard replacement has helped.
    Michael

    So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
    My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
    So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
    Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

  • Network savings are lost after system restart

    I am new to Unix. I have an Ultra1 170E with Solaris 7. I configured the network with ifconfig hme0 plumb; ifconfig hme0 131.107.x.xxx netmask 255.255.255.0 broadcast 131.107.x.255. However, each time I restart the system it only retains 127.0.0.1. Thanks in advance for your help.

    Check the following files:
    /etc/hostname.hme0 and /etc/hosts file on your system.
    The /etc/hosts file should have the ip address and hostname.
    The /etc/hostname.hme0 file should have the ip address of this
    machine.
    After ensuring the above, reboot the system and it should
    show up correctly.
    Thanks
    -Manish

  • Bookmarks favourites are lost after a restart of computer, why

    when I leave Firefox and perform a restart all my favourites that are under the Bookmarks Menu are lost. How do I ensure that they are still available at all times.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Bookmarks_not_saved

  • IPad  upgrading to iPad2- all messages lost after restore.

    I couldn't find this anywhere, but I thought I saw someone talking about it a couple of weeks ago.
    I have an iPad and just got my new iPad2.
    The 'restore' worked just fine, but all the messages I had on Mail are gone.
    Anyway to get them back?
    Most are still on my Mail application on my Mac, but it was handy having them there.
    (using POP, not IMAP)
    sorry for any reposting.

    From what I u dear stand there is no way to get them back on the iPad.

  • Messages are getting lost during server restart

    Hi,
    we have a clustered environment.
    soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
    Queues are configured on each server.
    Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
    When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
    we are following the below procedure for server start
    1) pause soa_server1 queues then bounce soa_server1
    2) pause soa_server2 queues then bounce soa_server2
    3) pause soa_server3 queues then bounce soa_server3
    We are observing there is a message lost after server bounce...
    thanks in advance
    anvv sharma

    Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
    How did you find that messages are getting lost?
    Regards,
    Anuj

Maybe you are looking for