Nokia 5300 chinese language setting missing

My phone is Nokia 5300 Express Music. The first time i'm using Nokia PC Suite, going to update some software. The software is firewall update. After updated, i realized my phone language setting is changed. Chinese and Malay language is gone and others language like romana, deutsch and something else was appear. I think maybe is the software updated so the language setting also changed. So i might need help to change the language setting back to chinese cause i need chinese language to use for my phone book in chinese words.
Anyone is know about any software to help me fix my problem???
Hope to hear some good advice and help from nokia supporter.
Thanks & Regard!

Your phone was intended for sale in a part of the world other than where you are. The importer/retailer installed the appropriate language packs for you but didn't tell you that this was the case. If you have a gripe against anyone, it's against the importer/retailer.
We can't direct you to the Nokia care points for your country because we don't know what your country is. What you can do is go to http://www.nokia.com and follow directions to support for your country from there.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

Nokia 5800XM Chinese language is missing

can someone tell me why after i update the new software 31.0.10, my chinese languages is missing!!!can someonw help me..

http://techyoddsandends.blogspot.com/2009/09/my-language-has-disappeared-from-my.html
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Contacts (ip 4, ios 5, chinese language setting, icloud):

after using ios 5, all newly created or edited contacts cannot be sorted (apple uses alphabetical order) together with all other contacts, but started it's own listing at the bottom. strange...
eg, added "leo". but it cannot be listed together with other names starting with "L", but started to be under "L" after the normal "Z" names...
it's made the management quite messy.

Ok. So after too much of a fight with the iPhone, here is what i think got back the contacts on my phone.
Step 1: Setting -> Mail, Contacts, Calendars -> iCloud : Switch off everything.
Step 2: Go back to main setting page.
Step 3: Make sure you see "Inactive" under iCloud.
Step 4: Hit the home button
Step 5: Close iTunes and start it back up.
Step 6: Unplug your iPhone from the computer and plug it back in.
Step 4,5,6 is to make sure you are starting a new session.
Step 7: Sync iTunes.
Step 8: Check your contacts. They should have come back up
Step 9: Setting -> Mail, Contacts, Calendars -> iCloud : Switch on everything.
Choose the option "merge" when you get it.

Nokia 5300 video problem

Hi.
I have a nokia 5300: i can set a video for incoming call but, when i receive a call, its volume is less than the original video. What can i do?
TNX
Ps sorry for my horrible english :/

XMichael,
I suggest that you drop a message to Nokia :
http://www.nokia.co.uk/A4222231
CheeRiOS!

Chinese language pack on English-language Nokia E7...

I'm based in Manila and just bought a Nokia E72 cellphone here locally in the Philippines. The unit is labeled E72-1.
I needed a cellphone which can display Chinese-language (both Traditional & Simplified Chinese) characters.
Unfortunately, this E72 I bought here only has the English language.
I've read that the Nokia E72 in Hong Kong / Taiwan / Singapore can display both English and Chinese language.
Is it possible to have the Nokia E72 add a Chinese language pack to display Chinese characters? I really need the Chinese display capability since I regularly have contacts who send me important SMS messages with Chinese characters.
If it's not possible to add the Chinese character display capability, I may be forced to let go of this Nokia E72 and perhaps have to order it instead from Hong Kong (or perhaps Taiwan or Singapore) where I presume the Nokia E72 there will have the English + Chinese display capability built-in.
Although not as important as the Chinese-display capability, I would also like if it could have Chinese language input capability installed on this E72. Is this also possible?
Note that I don't need the phone system menus/commands to be displayed in Chinese language (and actually prefer them to be English language). I only need the phone to display/input Chinese characters in the SMS messages.
Please advise so that I can make a decision as soon as possible, whether to let go of this locally-bought E72 with only English language and instead procure a unit from abroad with the Chinese language display (and input) capability.

I'd like to add some more information which may or may not be exactly useful for those who have the same issue as mine:
Adding as much Chinese as possible on the E72 without Chinese language pack:
http://europe.nokia.com/support/product-support/e72/software
Mobile dictionary language packages Translate words into the language of your choice. Add new languages to your pre-installed Mobile dictionary application from Mobile dictionary download page >>Text-to-Speech language packages and voice packages
Let your phone read your messages out loud with Text-to-speech, a tool which allows you to listen to text messages, multimedia messages, and emails. To utilize your Message Reader application download language packages and voice packages at the Text-to-speech page >>
1) Using the above page, one can download Chinese dictionary (Traditional and Simplified Chinese versions available).
It seems that after installing both dictionaries for the Mobile Dictionary application, I can fire up the Mobile Dictionary app and choose Target language to Traditional and Simplified Chinese. The Traditional Chinese characters don't seem to display (some characters display while others are "square boxes"; but the Simplified Chinese characters appear to display correctly.)
So, it appears that the dictionary app can display Chinese characters (at least Simplified Chinese) after installing, although the SMS messages still display "square boxes" where there are Chinese characters.
2) Download Chinese [Mandarin] (or Chinese [HK]) language text-to-speech. Now even though the E72 doesn't display Chinese characters (they show up as square boxes), I can use the msg reader to read those "square boxes" messages and it will read them in Chinese. So at least, that's one way of having Chinese read back to you although the characters themselves can't be displayed. (Set Language Detection to "On" in the Speech settings so it automatically recognizes Chinese; or one could also set the Voice Language to Mandarin Chinese so that even the voice prompts are read in Mandarin Chinese -- however, if Language Detection is set to "Off", it will try to read English SMS messages as per Chinese pinyin -- ie. incorrectly.).
One bug I notice is that for Chinese character email messages (Nokia Messaging). If I set my Language to English, but set the Speech setting of Language Detection to "On", and then activate the "Listen/Read" email messages, then the Msg Reader will hang up the phone. I had to use a utility called JBakTaskman to forcefully close Msg Reader (if don't have JBakTaskman, then have to turn off the phone and turn it back on). So it looks like while the Language Detection can auto-detect Chinese characters in SMS messages and read them properly in Chinese, it seems to hang up in Email Messages.

Chinese Language for Nokia 5800 Express Music

I have recently updated my nokia software version from V21.0.025 to V31.0.101 using the nokia software updater. However i notice that my Chinese, Malay & Indonesia languages have all dissapeared.
Can anybody help me please.

Looks like you bought a phone that was meant for another region and the language pack containing Chinese was installed afterwards by the retailer. The retailer should have told you this. When you updated the firmware, the phone reverted back to its original language set. Worst of all, the warranty may not be valid in your country.
Anyway, language packs can only be installed by Nokia Care Points and you will lose it again the next time you update your firmware.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Missing Text when logged in chinese language

Dear Experts,
I have created a smartform to print barcode which will be triggered through a custom program.Everything is fine when logged in EN but when logged in chinese language one of the window text/information is missing in the layout.All the attributes/parameters of this window are normal and same like other windows.
I debugged the smartform to see the language parameters being passed in the run time for this window and found everything is quite same with other windows but I really can't figure it out why this particular window text is missing.
The text/info. printed through this window is a value that comes from the print program.
I also tried the option translate into other language in the attributes but not really useful.
Any help is greatly appreciated <offer removed by moderator>.
Regards.
Edited by: Thomas Zloch on Feb 23, 2012

Hi,
I am not sure , but if output and Font have no problem, then this can also be due to output device type used for smartform / PDF printing.
Check if output device type is different in EN and ZH in table TSFDEVTY.
Regards,
Ramya

UTF8 character set conversion for chinese Language

Hi friends,
Would like to some basic explanation on UTF8 feature,what does it help while converting the data from chinese language.
Would like to know what all characters this UTF8 will not support while converting from chinese language.
Thanks & Regards
Ramya Nomula

Not exactly sure what you are looking for, but on MetaLink, there are numerous detailed papers on NLS character sets, conversions, etc.
Bottom line is that for traditional Chinese characters (since they are more complicated), they require 4 bytes to store the characters (such as UTF-8, and AL32UTF8). Some mid-eastern characters sets also fall in this category.
Do a google search on "utf8 al32utf8 difference", and you will get some good explanations.
e.g., http://decipherinfosys.wordpress.com/2007/01/28/difference-between-utf8-and-al32utf8-character-sets-in-oracle/
Recently, one of our clients had a question on the differences between these two character sets since they were in the process of making their application global. In an upcoming whitepaper, we will discuss in detail what it takes (from a RDBMS perspective) to address localization and globalization issues. As far as these two character sets go in Oracle, the only difference between AL32UTF8 and UTF8 character sets is that AL32UTF8 stores characters beyond U+FFFF as four bytes (exactly as Unicode defines UTF-8). Oracle’s “UTF8” stores these characters as a sequence of two UTF-16 surrogate characters encoded using UTF-8 (or six bytes per character). Besides this storage difference, another difference is better support for supplementary characters in AL32UTF8 character set.
You may also consider posting your question on the Globalization Suport forum which pertains more to these types of questions.
Globalization Support

The general language setting for my Ipad is simplified Chinese, but my appstore is all in korean

the language setting for my ipad is simplified chinese, but the appstore are all in korean, what's wrong with my ipad 2? and how can I fix it?

Sounds like your Apps Store is set to the wrong country for the AppleID you are using on your iPad. You need to go to the Apps Store on your Computer, and then scroll down to the very bottom of the screen. There you will see a little flag button. Click on it, and select the flag for the correct country. That should fix your issue.
Hope this helps!
Cheers,
GB

How to change the language setting in Adobe Flash CS6, from Chinese to English?

How to change the language setting in Adobe Flash CS6, from Chinese to English?

Unless you have a multilanguage serial/ installer, you are on Creative Cloud or care to run through language swap you can't. Retail serial numbers are language specific and most Adobe apps cannot be coerced or switched on the fly since without the proper language resources installed, this won't work...
Mylenium

How to download chinese language to nokia 113?

Any way to download Chinese language to Nokia 113?
Solved!
Go to Solution.

Those models that are sold in China and countries that uses Chinese as a primary language

I had a Singapore SIM in my Iphone 4S and now i'm in Hong Kong. After I inserted Hong Kong SIM, the playlists in My Music got changed to Chinese characters from English. How to change it back to English? My language setting is only English

I had a Singapore SIM in my Iphone 4S and now i'm in Hong Kong. After I inserted Hong Kong SIM, the playlists in My Music got changed to Chinese characters from English. How to change it back to English? My language setting is only English

What you have mentioned happen to me. I posted new stuff just now. https://discussions.apple.com/thread/4450344

Help! Itunes App on iP4 is set to chinese language?

How to change the language of itunes app on iP4 if it was already preinstalled. other apps were ok, it only the itunes app is set to a chinese language. will someone help me?

Hi., Ms. Carolyn, thanks for the response, but I think that option refers to the general settings for Language. I'm referring solely to the itunes app installed on the iP4. thanks for the additional reply in advance.

Language setting for windows live account security - keep receiving chinese communication when my account is in English

I keep receiving important security emails from [email protected] in Chinese language when my language selection is in English.
Can someone help to advise me what setting do I need to change to correct this? Thanks

1. Go to https://account.live.com/proofs/Manage
2. Scroll down and set your language to EN-US > Save
3. Under "Security info helps keep your account secure," remove your current email address and re-add it.
(You may have to use a temp email account if you only have one email address for receiving security related emails from Microsoft.)

SOS nokia 5800 v 31.0.008 change my language set

I have just update my 5800xm to V31 using nokia software updater.
the same way I used before to updated frome V21 to V30.
But this time it change my language set from 23 to 1.
My phoe model :5800 XpressMusic type: RM-356 code:0578174
Is any way to change back. Please, Please help I really need it
for travel. Thanks!!!!!

the only way you can get it back is to take it to nokia care for them to install it for you at a small fee. that means that your phone was not meant for your region to begin with and had added languages after it was already designated for another part of theworld. you will lose the language again if you update your phone or have to reformat it in the future.
it looks like your product code is for France. where do you live ?
Message Edited by radical24 on 15-Sep-2009 03:42 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Nokia 5300 chinese language setting missing

Similar Messages

Maybe you are looking for