Nokia 5500 Network Re-connection Problem

I've had a 5500 for a couple of months now, and have found that if it looses reception (e.g. in a lift) it can fail to re-connect to the network (on exiting the lift).
Both myself and my partner have the same phone, and it's possible to have one with good signal and one with none. If the faulty phone is switched off and on again, it will connect immediately and work correctly.
Has anyone else experienced this problem, and if so, did they find a resolution?
Both phones are running firmware v3.18. Thanks for you time.

FIRMWARE PROBLEM DON"T THINK IS THE ONLY ONE
I THINK THERE ARE A LOT OF BUGS
JUST WAIT IF A NEW XTRRA FIRMWARE COME
NOW SEEN IS 3.55
I WILL TRY IT SSOON

Similar Messages

NOKIA 5500 SPORT - USB Connectivity problems

When connecting my 5500, the message "new hardware found", "portable device driver" and "NOKIA 5500 Sport" pops up all the time, I rpt: All the time..
I am able to make a back-up, but I am not able to read dato in the nokia browser (liike contacts)..
Can you help me ??
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Operativsystem:
Microsoft Windows XP
Bygg 2600
Service Pack 2
Språk: Norsk (bokmål)
Språk for ikke-Unicode-programmer: Norsk (bokmål)
Lokal: Norsk (bokmål)
Inndataspråk: Norsk (bokmål)
Nokia PC Suite:
Versjon 6.83.14.1
Språk: Norsk
Connectivity Cable Drivers:
Versjon 6.83.9.0
PC Connectivity Solution:
Versjon 7.7.10.0
Microsoft Outlook:
Versjon 11.0
Bygg 8118

Excuse my ignorance to NOKIA forums.. But what is "WPD loop posts" ??

Nokia 6700 USB cable connectivity problem -fixed-

Ok, got my 6700 today. Everything worked like a charm, until I tried to connect it to my PC using the supplied USB cable. I downloaded and installed the latest Nokia PC suite which supports this phone (7.1.30.9) and connected the phone. Vista was unable to install a driver, and the phone was listed in the device manager as 'unknown usb device'. The phone display reported 'no response from host' after plugging in the usb cable.
I searched online for a solution, and tried the following:
- repaired the install of the Nokia connectivity cable driver: no success.
- deinstalled the nokia pc suite, ran the pc suite cleaner, rebooted and reinstalled the pc suite: no success.
- threw away the unknown usb device in the device manager and plugged the cable back in so that Vista would try to install the driver again: no success.
- tried other USB slots (not behind HUB): no success.
At this point I was so frustrated that I decided to take out the supplied 1gb micro sd card and transfer some data to it using a card reader. When I looked in the root of the sd card, I noticed that there was an executable called pc-suite.exe there, among some other files. I decided to delete those files to see if they were causing the problems, I deleted the following files:
- autorun.inf
- launcher.exe
- pc-suite.exe
- qf
Replaced the micro sd card in the phone, plugged in the usb cable and voila: connection! Everything worked like a charm.
During my online search I noticed I wasn't the only one experiencing connectivity problems with the 6700. Maybe this fix will help other people as well, that's why I decided to post it here. ;-)
Peter

Thanks Peter, nice job - same problem, your solution is working. Shame on Nokia - i have so many problems with E52, and now with 6700 - why ? Is it so difficult to make a reliable software ? So disappointed ... maybe Apple is the solution - but after 10 years with Nokia why change with Apple ?

Nokia n8 wlan wifi connectivity problems

I purchased Nokia N8 about 2 months ago. Lovely phone, camera etc. However I am having serious issues with wlan/wifi. I have set up my phone to connect only to wifi or wlan. I believe I have all the settings correct. But when I try to connect to the web I keep getting the message that connection charges will be incurred etc and when I click on it goes online using my phone internet ie O2 wap service or my O2 internet service. Therefore I am being charged even though I have connected to wifi. I have tried everything but this is getting really annoying. I am abroad at the momen and my hotel has free wifi etc. Even when I have gone into my O2 store I might aswell be talking to the wall. No good. I should have purchased an Apple I4. Can someone please help me.
Solved!
Go to Solution.

For all people experiencing problems with N8 (and some C series phones) and WLAN connections : Is your router a Linksys, Alcatel, Thompson or Speedtouch?
I had a Speedtouch 585 router v7 and couldn't connect to my home WiFi, but could connect at my friends' Wi-Fi's. I tried renaming the SSID with no blanks, manually setting the IP's and DNS, but the problem persisted. And the problem was the router. Since the firmware upgrade, the QoS (Quality of service) parameter cannot be tampered with. You have to turn it off manually. To do so, do this :
1) Open a command line window (start-->accessories-->command line OR start-->run--> type "cmd")
2) type telnet 192.168.1.254 and press enter (this was the router's IP address in my case, it may be 192.168.1.0 or 192.168.0.1) (If it doesn't connect right-click the connection icon at the bottom of the screen-->properties-->TCP/IP and note the IP address)
3)enter your username and press enter (default admin)
4)enter your password and press enter (default <blank>)
5)the router command line logo should appear. Type wireless and press enter
6)type qos and press enter
7)type config mode disabled and press enter
8)type saveall and press enter
9)type exit and press enter
Find your WiFi in your N8 as usual (delete any previous access points of your WiFi if any) and set it as first in priority (in N8 : settings-->connectivity-->settings-->network destinations-->internet)
You are ready !
Thanks to the original writer here : http://morgis.net/Nokia%20ugyldig%20server%20navn.htm

Nokia C3-00 Internet Connectivity problems

For the last two days, I've been having a problem with connecting to the Internet from my C3 - I can't connect at all.
I always get the "Link not available, try again" and "Service not available" and "Packet data authentication failed" messages on all my browsers. I'm nowhere close to WiFi or WLAN networks, so I have to use the Internet settings via my mobile provider.
I have restarted it, formatted the phone via 'restore factory settings', but none of those options helped. I can't update the software on my phone...because my Internet is not working.
I've read a lot of forum discussions on this problem with C3 - is it that the phone is doomed to go down this route eventually, one way or another?
If anyone knows what I can do to restore my online life, please help me.
Solved!
Go to Solution.

vandy1947 wrote:
my mail in c3-00 had nt been wrking
Does this answer your question?
vandy1947 wrote:
now my wi-fi connectivity […] is not working
That should work still. Nokia C3-00 » Menu » Settings » Configuration » Personal » Is there a Access Point and a Web configuration? Are both activated?

Nokia E71 - PC Suite connectivity problem

Hi, I am using E71 since 1 year and use to connect to my LAPTOP on PC Suite. Since One month i am facing problem that the phone is not getting connected to my LAPTOP. Drivers are installed , PC suite upgraded to 7.4.x, checked at Nokia care center, No success. When I click on PC Suite, it looks for connectivity and gives an error as check for connector drivers. I got my LAPTOP also verified by service centre and confirmed LAPTOP is good with any other device except with this. Meanwhile If I connect the same E71 with same cable to another LAPTOP which is installed with PC Suite is connecting well and even at Nokia support center it worked with their PC. I could not find a solution. on how to resolve this. Pl. help me.
I have enclosed screen shorts for reference. My LAPTOP has 4 USB ports and device is detected and drivers are installed on all the 4 ports. But it is not detected from PC SUITE.
BUT IF I CONNECT THE PHONE IN MASS STORAGE DEVICE, IT IS WORKING FINE.
Enclosed file is .docx file, pl. remove .txt in the extension and read.
Rgds, CMK
Attachments:
E71_Connection Error.docx.TXT ‏368 KB

Problem just solved. I installed Microsoft Windows XP Home Edition SP2 operating system and now it works perfectly, so the problem was just that the performance edition operating system caused the drivers not installing properly. But now I have another kind of a problem. I am using the N96 as a modem for Internet. I can only get a speed of approx 45kb/s, while I have got almost 110kb/s with another computer using the same cable. Is it caused because of the USBv1.1 slow USB version? But shouldn't it still be able to do better than 45kb/s, while it transfers files with OK speeds? When I use the Bluetoothv1 USB Dongle, it works with about the same speed but only when using the performance edition, not when using the home original OS. When using home edition OS it works about 5kb/s, but it could have been just temporary. But my main question is, still, that how could I get the speed faster? I have installed the windows KBxxxxxxx patch, but still it works pretty slow, just about half of the speed it is supposed to work.
Message Edited by jupstejuho on 14-Feb-2009 10:10 PM
Phones history: Nokia 3210 > Nokia 5210 > Nokia 9210 Communicator > Nokia 3230 > Nokia N91 > Nokia N96
Current phone: Nokia N96, Elisa Finland Network Branded, v11 Unbranded Firmware [MADE IN FINLAND] Product Code: 0573582

NOKIA C5-03 Internet connectivity Problem..

I Have Nokia C5-03 bought before 4 months.
I use BSNL Prepaid card, 3G/EDGE enabled.
I am facing problem of not being able to connect to internet via 2G/3G reliably.
whenever I try to connect to internet, 7 out of 10 times it gives me message"
"connection not available.pls check connection settings".
Many a times after restarting the phone, internet gets connected.but not always.
I also own Nokia N73. But whenever I insert the same SIM card in it, it never failed to connect to internet, neither it has given me such problem in last 4 years.
In only In Nokia C-5 03 I Need to struggle for getting connected to net.
2 times I visited Nokia service center, but they have only formatted it and installed software to it and gave it back.
I have also installed latest version software to my handset from nokia site to fix any bug if it has any..
But it doesn't work..
what i need to do..?
Your Plans May Fail.. But Dont Fail to Plan..

Hi maheshjc,
Welcome to the Nokia discussion boards!
Have you asked the operator to send through the relevant connection settings for your device? This should just be a simple text which asks you to automatically configure and setup these settings once they have been sent through.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Having network printer connection problems using a Macbook Pro

I hope a "greater mind" can suggest a solution to the following problem:
Up until 2 days ago, I was successfully connected to the network printer at my office using both my Macbook Pro at work and at home (both wirelessly, OS 10.6.8). From yesterday, however, I now only receive the following message when I send a file for printing: "network host (and then its IP address) is busy. Will try again in 10 seconds."
All right, my system admin. advised me to re-install the printer on both computers. I did. In printer set-up, 1) Protocol: Line Printer Daemon - LPD; 2) Address: the IP address of the printer; 3) Queue: secinmac. This is the queue name specifically for Mac use and given to us by the company who installed our network printer; 4) Name: we use the printer's IP address; 5) Location: left blank; 6) Print Using: Generic PCL Laser Printer. Further for 6), in the "installable options" dialog box, I click "Duplexer". Then, finally, I click "ADD". The printer is added.
However, when I try to print a file, I continue to get the "busy" message. The file spools for about 3%, and then the "busy message" appears, and I cannot print. You can imagine how frustrating this is when the problem has arisen from one day to the next! A colleague who also uses a MacBook Pro sent a file to print on the network printer today, and he had no problems! I, however, have no success !
Any ideas that can help me? Thanks, in advance!

Thank you for taking the time to respond.
Yes, I tried this when I was reading a bit of Apple communities history on this matter, and it did not work. I also tried this, and then rebooted my Mac, but to no avail! While I was at the office today, my system admin also logged into our network and tried to get something to print on his Mac, but he now has the same problem as I do.
He gets the "busy message", too !
I'll try to see if I can get a solution from APPLE by going through my support service agreement.....From reading the history on this issue, I would have thought that APPLE would have worked on this to come up with a fix by now...!
Thank you again for your suggestion! Cheers.

Nokia 5800 Low GPRS connection Problem In canada /...

Hi ,
i bought a Nokia 5800 phone , from Middle East , but they come from europe in general
I live in Canada thought and my Connection to FIDO GPRS is veryyy Loww take a minute to log on evry page .....a friend told me that the problem is because you bought it from outside Canada leaded to make it low cause the Hz that the phone is exepting isnt the same as the Hz of Canadians operators .......so my question is : dos anyone know what shold i change/update? to make my conectivity compatible with the canadian/american connectivity??
Thanks a lot for anyone
P.S: Connection to Wifi is PERFECT! cause its international...if you guys understand

In fact.. a no. of users have this issue..
/t5/Connectivity/5800-memory-full-in-PC-Suite-mode/m-p/743651/highlight/true#M32680

Lion OS x network/printer connection problem.

I am trying to connect a Macbook Pro, Lion OS x to a Canon MP530 printer on a wireless network. I already have another Macbook Pro (Snow Leopard OS x) set up to this wireless printer/network, and it works just fine. When I try to connect the Macbook Lion OS x, I get error messages stating "An error occurred while trying to add the selected printer. Unable to communicate with the printer at this time." I thought it was a printer driver problem, so I downloaded the correct updated driver for the Canon MP530 from both the Apple and Canon websites to the Macbook Lion OS x. When I try to setup the Macbook Lion OS x on the printer/network again, the Macbook Lion OS x acts like it doesn't see it the updated driver when it gives the message stated above about "an error occurred........"
On the bright side, I am able to connect the Macbook Lion OS x to the wireless printer network via the Snow Leopard OS x by print file sharing just fine. The problem with this is that the Snow Leopard OS x Macbook has to be on. If this computer is not on, than the Lion Macbook will not be able to print.
Connecting the Macbook Lion OS x directly to the printer also works.
The Macbook Lion OS x on the network does not appear to "see" the updated Canon MP530 drivers. For some reason, the Macbook Lion will not communicate with the network printer, without going through the other laptop. Is the Canon MP530 compatible with the Lion OS x operating system on a wireless network at all?
Is there a way to connect the Macbook Lion OS x to my network directly without having to go through the Snow Leopard OS x Macbook?
Resetting the printing system doesn't work either.

Understood. But I meant are you still able to install this Canon driver. With you trashing the BJPrinters folder previously, there should have been no Canon driver files on this Mac. And given that you have had no luck installing the Gutenprint driver I was wondering if you also had the same problem with installing the Canon driver. I am guessing that you were at least able to install the Canon driver, even though it won't let you print.
So with you not able to install the Gutenprint driver suite I would say that you have the following options.
1. Continue printing via the Snow Leopard share. Not ideal but the cheapest solution at this stage.
2. Download and install PrintFab (www.printfab.net). This also supports Canon printers but it costs 49 euro. But there is a 30 day trial so you could see if this will install and let you add the networked printer.
3. Replace the 3rd party print server with an Airport Express. The Airport USB port will allow you to use the Canon supplied driver.
4. Replace the MP530 with a new printer that has built-in wireless.

Nokia Music with 5800 Connection Problems

Hi All,
Trying to update music from my PC to my 5800XM with Nokia Music 1.2
When I connect using the USB cable and I select any of the 4 connction options, it tells me that I have selected the wrong connection type, but not which type to select.
I have to transfer the music manually either by removing the MicroSD and inserting into my laptop or via USB connection to my PC. This, of course, doesn't transfer the album covers, which is part of the reason for using Nokia Music.
Also transferring MP4 movies doesn't work using Windows/not via OVI.
Regards,
Mark

dropping the phone would result in hardware damage and hardware damage would be obvious. cracked screen, phone constantly rebooting, etc etc.
What i have problem with is this, let's suppose dropping the phone NEVER caused the underlying issue, nokia care can turn around and say, you dropped it, it's your fault, but what if it was not? how exactly does nokia prove otherwise, part of the testing of the phones is to test stuff like being dropped, why else do they have machines which simulate this? the fact is phones are supposed to take a little punishemnet, just because the phone shows signs of it being dropped should not auto matically qualifiy it to being void, plenty of other eletronics out there, torches, mp3, phones can take a beating much more than she did and anyone else and warrenty not be void, this is just a cheap excuse to make more money and not repair the phone.

Nokia PC Suite Update Connection Problem

My Nokia Pc Suite version 6 worked perfectly from my laptop to Nokia N70 through a USB Bluetooth connection (MSI Bluetooth device and BlueSoleil Software)
I downloaded and installed Nokia PC suite 6.82. The new PC suite opened but when I tried to connect a the following message apeared: "There is no available connection type and therefor connection to the phone cannot be established. The wizard will exit"
BlueSoleil was connected to the phone through the USB device all the time.
I deleted version 6.82 and reinstalled version 6 which now also fails to connect!!!!!!!
Am I stupid or what!!!

Hello Everyone
I've been experiencing the same issue (cannot connect to the device or similar message given by the Nokia PC Suite software) for 4 weeks now and until recently put the problem down to the Bluetooth Stack software driver provided by Toshiba with my new laptop. The reason for why I thought it was Toshiba's fault (and spent hours over the last 4 weeks on the phone to their support department) was because each time the connectivity issue arose I managed to resolve it by uninstalling and re-installing the Toshiba Bluetooth stack software driver via the Windows Add/Remove programs which then allowed the PC Suite Software to recognise my Nokia N73 software. I found that reinstalling the Nokia PC Suite software did not resolve the issue although I am convinced that it is the cause of the issue. Therefore, you may wish to try reinstalling whichever Bluetooth driver software (the one provided by your hardware provider or the MS windows one) just to see if this resolves the problem.
Please note though that almost every time that I install new software onto my laptop e.g. anti virus etc the connectivity issue resurfaces and I have to reinstall the bluetooth software to overcome. I have resigned myself to doing this as at least I know that it works although Nokia really ought to fix this once and for all in their software.
By the way, I am also using Nokia PC Suite version 6.82.22.0 and have never had an issue with connecting via a USB cable.
Good luck!

Nokia 3710 - PC usb connection problem

I have the latest firmware on my 3710 and the settings on Connectivity are set USB Data Cable to PC Suite.
When I connect the USB Cable from my PC to the phone, my PC which runs Windows 7 Home Premium does not even recognized that there has been some kind of USB connection. Is my phone faulty?

Nokia doesn't supply USB cables with all its phones. So it may b the case. From where did u get that cable? And is it new or used? If its a Nokia Original & its not working then u can check the compatibility on the Nokia Website of ur region.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

P965 PLATINUM / REALTEK network adapter connectivity problem

hi,
I cannot connect my PC with my laptop using a crossover ethernet cable. All of the crossover cables I have tested operate as expected when used to connect other computers. A fact that complicates things more is that the connection status is indicated as "connected" in the network connections window but no packets are received at all.
My configuration:
MSI P965 PLATINUM (flashed with v1.2 BIOS)
OS: Windows XP PRO SP2
REALTEK driver version: 5.654.721.2006
Network IP, mask and gateway are manually assigned.
Note1: The network adapter works totally fine when connected with my router using a straight UTP cable.
Note2: My brother's PC (which has exactly the same configuration as mine) has the same problem.
Thanks in advance

Thank you all for your tips.
Please note that network file sharing is enabled. If I use my ADSL router as a gateway (it is 192.168.1.1 as you can see in the ipconfig commands output) the computers do communicate.
Problems arise when I use a crossover or straight cable to connect directly my desktop and laptop. Some things I have tried:
- I have disabled the firewalls on all computers.
- If I ping the localhost (127.0.0.1) I get packet replies. However, when I ping the other host I get timeouts.
- I have set the connection speed manually from the device manager to 100mbit/full. Still no good.. :(
P965 PLATINUM (DESKTOP PC)
Code: [Select]
C:\Documents and Settings\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : desktop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-16-17-EF-3B-04
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
ACER ASPIRE 1403 (LAPTOP)
Code: [Select]
C:\Documents and Settings\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/100 Network Connection
Physical Address. . . . . . . . . : 00-02-3F-B1-F7-89
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.99
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Is there any utility to check my network adapters? It is a VERY weird situation, because on both adapters the green light is constantly ON, and the orange flashes from time to time. I assume this means that on hardware level everything is fine. Moreover, I cannot believe that there is a firewall/AV that interferes, because even if I shut them down, I still can't ping the other host.
Thanks in advance

Nokia N78 Bluetooth A2DP Connection Problem

Hi there!
My phone model is Nokia N78, type: RM 235, software version 30.011.
I got a SONY DRC-BT15 Bluetooth Receiver, which is like this one http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&lang...
Nokia N78 is said to support A2DP Bluetooth connection but how can I turn on the A2DP Bluetooth connection? Can anyone help me?
I have no problem pairing and connecting my N78 to SONY DRC BT-15 but the sound I hear through the SONY device is definitely not A2DP at all. The sound sucks. When I connect my SONY DRC-BT 15 with my MacBook, I can choose to listen by Mono or Stereo Mode, and when I choose the Stereo Mode(I guess it's what we call A2DP), the sound through the SONY device is good.
So how can make the SONY headset to connect to N78 via A2DP to listen to good music?
I have been trying for hours. This problem makes me crazy.
I would really appreciate your help.

ganchiau wrote:
Thanks for showing me the specifications and reminding me of the DRM issue. Just one more question: When there's no DRM issue, does the A2DP turn on automatically and connect to my bluetooth headset (which supports A2DP of course) automatically too? Or how do I switch to the A2DP connection mode on N78? I just don't know where to turn A2DP on!
Thanks a lot.
Pairing provides the profile in a handshake protocol so yes, it should work.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Nokia 5500 Network Re-connection Problem

Similar Messages

Maybe you are looking for