NOKIA 5530 NOT DISPLAYING NAME WHEN RECIEVING TEXT...

My partner has purchased this phone today and everytime she recieves a text its only displayin the phone number and not the name of her contact... we have tried everything and cant seem to sort the problem, we would be extremely greatful for any help,
thank you in advance

Have read through this: http://techyoddsandends.blogspot.com/2009/09/problems-with-caller-id.html
If the contact is ID'ed correctly with incoming calls but not with incoming messages, I reckon it's more of a problem induced by operator branding. If it were down to duplicate contacts, the phone would not be able to ID incoming calls either.
Mind you, I'm assuming that caller ID works for calls since you only said that it didn't for messages. If it messes up calls as well then jimmyireland is probably right.
Message Edited by grschinon on 27-Dec-2009 02:42 PM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Please help! Nokia 5530 just displays "call" when ...

    OK guy, yes i have searched the forum but noone has asked this for this specific model and for other models noone seems to have a definate answer as to how to solve the problem.
    . My display shows "call" rather than the contacts name when a call comes thru
    . Text messages display the contacts name perfectly
    . I have no double entries ie "emergency" as 12345 and "John" as 12345 which wouldnt solve the problem because text messages display the name
    . All my contacts are saved to phone memory and none are on sim card
    . There was some bug/issue causing messages not to come thru in itially but that was resolved by (i cant quite remember, perhaps deleting the sim  - but whatever it was worked)
    So anyone resolved the issue for the 5530? Its driving me insane, and i'm blonde so cant think of another way
    Thanks
    Solved!
    Go to Solution.

    Hey I'm in Ireland
    Well a lot of different prefixes are in my contacts. ie for landlines just the regular prefix you'd use from a differen part of the country, some international contacts like +17whatever for the states or +44 for UK and some Irish contacts with mobile prefix 087,086 or +35387 if somebody i hadnt stored messaged me ....
    Its weird because EVERY contact name displays on receiving a text message

  • 0vendor is not displaying name attribute when I maintained master data.

    0vendor is not displaying name attribute when I maintained master data.
    Details: I have four records in the 0vendor infoobject (sand box). I have to show these four records to the client. As i have free hands I maintained master data in the name field and finally activated master data. But when I add the name attribute to the vendor charecteristic in the query designer; it is displaying name attribute as # . Any idea how to display the names of the four vendors in the zquery.
    Also do you know the transaction to copy standard query to Zquery?
    Thanks in advance.

    Dear Les
    For 0VENDOR, Set Property as Key & Text, try once again.
    Yes, you can copy the standard query very well.
    Open the Standard query & using SAVE AS, you can copy to "Z" queries.
    Hope, now you will get some idea
    Regards
    Saravanan.ar

  • I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

    i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
    UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
    style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
    when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
    example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
    names !today date or tomorrow date etc * priority high,low ,medium etc</big>

    This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
    I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
    On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
    Here is a link to the System Info from Photoshop on the Mac
    Here is a screenshot of my System Overview on the Mac
    Here is a screenshot of my Photoshop performance preferences on the Mac
    I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
    Here is a link to the System Info from Photoshop on the Windows computer.
    Here is a screenshot of the system overview on the Windows
    Here is a screenshot of my Photoshop Performance preferences on the Windows computer
    I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
    I have not recieved any error messages
    I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
    Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

  • Phonebook not displaying names in groups.

    Hi
    I just got a new macbook pro and when I connected my iphone to it, it erased all my contacts. So I manually put them in but now instead of displaying them by letter, eg-A-NAMES,B-NAMES,C-NAME,D-NAMES. It just shows one single list of people.
    Does anybody know what I can do to fix it.
    Thanks
    Aditya

    It depends on if your iphone is not displaying your contacts alphabetically or is address book not displaying names alphabetically.
    If it is the iphone, go to home screen > settings > phone and check the contacts section to see how the names are supposed to be sorted and displayed.
    If you have the settings correct, try power-cycling or resetting the iphone.
    Both shut the power down so you can turn back on. This link will help.
    http://docs.info.apple.com/article.html?artnum=305740
    If the reset does not resolve the issue, you might think about restoring the iphone. This link will help.
    http://docs.info.apple.com/article.html?artnum=305744
    If it is the address book that is having the issue, check the address book preferences to see how the names are supposed to be sorted and displayed.
    If these are set correctly, you can rename your address book preference file.
    To rename the file:
    Make sure you quit out of address book.
    Open finder and drag the following file to the desktop.
    ~\library\preferences\apple.com.AddressBook.plist
    This will reset any preferences you have set in address book.
    Hope this helps out.

  • Why exchange rate is not displayed correctly when I create the PO in SRM?

    Hi Gurus,
    Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
    But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
    Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
    But when the PO is transmitted to R/3, the exchange rate is the correct.
    My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

    Hi Muthu,
    I'm in Extended classic.
    I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
    Two checks of budget exist:
    1.- When creating PO (exchange rate date of delivery date of the SC's item)
    2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
    If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
    Now my question is: It is a standard behavior? (to take different exchange rate)

  • Background of Virtual keyboard in iOS8 for iPad not display properly when pop up in Column mode.

    Background of Virtual keyboard in iOS8 for iPad not display properly when pop up in Column mode.
    Device:iPad 4
    OS:iOS8.0
    Repro Steps:
    1.Navigate to any page that virtual keyboard will be used.
    2.Use your finger slide on virtual keyboard to make it in Column mode.
    3. Hide the virtual keyboard in Column mode.
    4.Tap on any field to use the keyboard again.
    Actually result:
    Background of Virtual keyboard not display properly when pop up in Column mode.(It's fine in iOS7)
    Please refer to the image:

    Are you running the latest Adobe Reader Version i.e. 11.0.1? Can you please share the file where you are encountering this issue to [email protected]?

  • PDFs not displaying images when opened in Google Chrome.

    My PDFs are not displaying images when opened in Chrome. They do display in other browsers and when saved to the desktop. I have tested on multiple machines. Is there a problem with how they are saved? Here is a test: http://www.omnils.com/userfiles/files/Brochures/KL-003_REV_0914_APEX_CR_SPEC_SHEET_lo.pdf

    "... a known Chrome issue."  The resolution lies with Google for this - nothing you can do (other than disable the "in house" browser add-on and enable Adobe's (if you have Reader or Acrobat installed)).
    A similar issue exists with other, contemporary, browser releases.
    The "fix" is these software houses to deploy PDF viewer browser add-ons that actually comply with ISO 32000.
    Perhaps their lazy approach reflects the attitude of "Hey, Adobe will get the hit not us."
    Provide your users a feed-back mechanism; you'd be able to respond with the suggestion that they ping on the appropriate software houses to provide adequate software.
    Be well...

  • Data selected is not displaying but when refresh the browser it displays

    The system brings back a record after the record is selected from the database. The data is in memory but is not display. When the browser is refreshed, the data displays.

    Sorry but this is an internal system. The problem is baffling because there seems to be no consistency in its patterns. Sometimes when we pull up an account, it would show the info. Other times the same information does not come up. We thought it could be missing records, i.e. orphaned rows, but this isn't the case. It is quite odd and especially hard to bug because we can't consistently replicate it.

  • My nokia 5530 wont turn on when i press power butt...

    Hey guys,
    my nokia 5530 wont turn on when i press power button
    I can't do a hard reset because i can't turn on ..
    Anyone have the solution please ?..
    I already try this :
    " /t5/Nseries-and-S60-Smartphones/nokia-5530-wont-come-on/m-p/581891 "

    Try removing the memory card, and turning it on while plugged it.
    Also try it with a new battery.
    This also happened to me once, I even hard reset it and nothing happened. Turned out to be that the battery died suddenly.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Nokia N95 not displaying callers name when call co...

    Well I guess I'm having problems all around with my new phone
    Anyways when I call somebody that I have in the contacts I don't get his/her name in the ballon, it only displays the number and not the name, same thing goes for incomming calls It just won't show the callers name and only shows the number for some reason, I tried re-adding the contacts, deleting them and writing them again but nothing works.
    Is there anyone that can help me ?

    First in contacts -options-settings check you are using only one memory phone! Not sim or sim and phone memory (several ) Next you need to check you don't have multiple entries, that is to say a number with more than one name attached to it, could be John, John Smith, Smithy, johnnie all with 1234567 as number, but in fact the same person, but the phone doesn't know this so only shows the number, you must use contacts from Phone memory and only have one contact attached to a number for caller id to work (it is fine to have several contact number attached to one contact, but not the other way round), this is a common problem and is always multiple entries, suggest checking your contacts in Ovi Suite is the easiest way to check !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Nokia 2310-not displaying caller name

    I've just bought a Nokia 2310 as they're very cheap as a standby phone but have a problem. I've copied the numbers from my simcard to the phone but if someone calls the phone, when it rings it only displays the number and not the name. This is obviously pointless as I would never know who's calling and makes missed calls a nightmare.
    What have I done wrong?

    The number in your phonebook has to match the one which is calling EXACTLY. So not 0489/235647 for instance, but you need to enter this number as +33489/235647 in your phonebook (the sign is important too). +33 is the country number of course.
    If you're still not sure, save the number from messages you have recieved and enter that in your phonebook. Doing this will ensure that the messenger's or caller's name is displayed.
    This is something I feel the manual should have adressed. You have no idea how much this **bleep** me off, until I found it a day later.
    k thx

  • Plain text emails do not display content when Usin...

    While testing the Nokia E71 as a possible phone to enable those of our workers who sometimes go on the road to access their emails using, an IMAP4 connection, I noted plain text emails just displayed the sender and subject line.  The text of the message itself is not displayed.  HTML emails all seemed to work perfectly it was just the plain text ones which did not work.
    I checked the emails in our test IMAP4 account using a standard email client and they displayed in full correctly.
    Has anyone else seen this and if so is there a way to fix it?

    Hi Peter
    Actually, Captivate does have an essentially unlimited number
    of undo levels. But that number may appear to be different. The
    number of levels starts when you begin editing the project. If you
    close and re-open a project, that starts the undo process over.
    I've tested and I gave up after about 280 or so undos.
    Where Captivate doesn't allow an undo, it normally warns you
    with a rather catastrophic looking dialog.
    Cheers... Rick

  • Displaying the senders name when a text message is...

    The 5800 and 5530 don't dispaly the name of the sender when a text message is received, right?
    Well so I thought. and I wasn't too happy about it as all my previous phones had this facility.
    Then a few days ago I got a message on my 5530 and when I looked at the screen there waa white star overlaying the image of the sender on my contacts bar.
    Great, I thought, I'd never noticed that before! But how could this be? I haven't had a firmware upgrade or anything.
    Since then I've found that I occasionally get the star on messages from this one contact, but not on messages from any of my other contacts.
    What's going on?  I've searched the web and can find no references to this at all.
    Have any other users noticed this feature? And can anyone explain why it doen't work for all contacts?

    you will have a double entry of the contact, if more than one name attached to a number the phone doesn't know who sent it,eg if you have John Smith and Johns Mobile attached to 123456 then the phone sees the number and doesn't know who sent it, check your contacts and delete duplicate/multiple entries, many threads on this subject on the forum. Always the reason !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Just purchased an IPod for my daughter and it's displaying my name when she texts

    I just purchased an IPod for my daughter. I added it to my Itunes account and when she text's or Facetimes it comes up with my name. How can I get it to come up with her name?

    Maybe here:
    https://discussions.apple.com/message/18187638#18187638
    It seems you have to make sure that email address is added to the Contacts app and her name associated with the address for that contact.

Maybe you are looking for