Nokia 5610 - how to make calls ring only on headph...

Nokia 5610 - how to make calls ring only on headphone and not on phone???
Could someone help me out please??? I tried everything... Nothing works!!!

Surely if you put the phone on silent and connect the headphone? That works on mine.
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992

Similar Messages

  • How to make calls on Skype

    I want to speak to people on Skype

    pls i want to know how to make call with Skype. If am calling some one the person will not pick the call it look as if the person is not seeing the call. pls ur help.thnx

  • How to make call recoder supported nokia Lumia

    My lumia phone has windows 8. In my phone call recoder is not running.

    has more to do with recording call anonymously in the USA as totally illegal, so MS probably blocked it because of this.
    all the call recorders only record what you are saying during a call, unless you put it on speakerphone...for obvious reasons.

  • How to make call reject?

    I have CallManager 4.2 and I want to make call reject functionality when the phone is on-hook and ringing. There is only answear and iDivert softkeys in this mode. It is possible to make iDivert to invalid number but I'm looking for more elegant solution.
    Thanks

    Are you using H.323 to the GW ?
    If so it could be possible to idevert to a service that disconnects the call and does not actually answer or give busy tone. Howeve depending on the network, that may have the same effect to the caller.

  • How to make a ring-type colorbox selector

    Hi,
        How to make a color selector as shown in the attached pic and vi? I have thought about using ring control, but I couldn't put a colorbox as the item inside the ring. Someone familar with this?
    Thanks.
    PS: attached vi is for Labview 5.1.1, I want to rewrite in labview 2010.
    Solved!
    Go to Solution.
    Attachments:
    resistor decoder.vi ‏108 KB
    Resistor Decoder.JPG ‏32 KB

    If you need future upconversion there is an Upconvert Requests Thread that you can use. There is also a corresponding Downconvert Requests Thread.
    As far as the code is concerned:
    Iit's not clear whether this VI was meant to run continuously or not. There is no outer loop for the VI, so the original programmer might have used the Run Continuously button. This is a bad idea, since that button is intended to be used for debugging purposes, not for normal operation.
    The VI has a minor bug. The numeric indicator for the result value has only 1 significant digit. Thus, for the colors black, green, silver it shows an answer of 0.1 but the actual value of the indicator is 0.05. 
    The original programmer used decorations to hide the numeric increment/decrement controls on the picture ring. This is not necessary. Simply right-click on the control select Visible Items -> Increment/Decrement to hide them.
    The colors shown aren't exactly correct. Some are missing. See here: http://samengstrom.com/24614782/en/read/4_Band_Resistor_Color_Codes  and here: http://en.wikipedia.org/wiki/Electronic_color_code

  • How to make call on Mobile from OCCAS

    Hi all,
    how we could make call on mobile from OCCAS, what type of configuration we have to do and what type of media server required. Also indicate if there is any simulator for media server.
    Regards

    Hello,
    The normal method is to use a PSTN gateway (SIP protocol supported) to connect the OCCAS and the MSC.
    And if only peer to peer voice call, no need to use the media server.
    Regards.

  • How to make call from MOTOROLA V3C

    hI ALL
    I m trying to make a call in flashlite brew thru
    getURL("tel:022-67508053"); but not able to make a call
    022 is Mumbai std code in India AND 67508053 is the landline
    number .. Also let me know how to make a call to mobile.
    Thanx in advance..

    Use numeric symbols only in the argument - no any "-" or "(
    Alex

  • How to make DFF Read Only ..

    Dear Friends,
    I have 3 segments in the Additional Personal Details DFF in HRMS. I want to make only the 2nd segment read-only not all the segments.How can we achieve this can any one pls let me know about this ...
    with regards
    Swpana

    Hi,
    Review the following documents and see if it helps.
    Note: 438215.1 - How To Make DFF Segments Read Only Using OAF Personalise
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=438215.1
    Note: 750679.1 - How To Make Only Some Of The Segments Of A Descriptive Flexfield Read Only On OA Framework
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=750679.1
    Note: 149452.1 - How do you make a descriptive flexfield display only?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=149452.1
    Regards,
    Hussein

  • SRM 7 Header Delivery Tab-- how to make fields read only

    Hi Experts,
    We are upgrading from SRM 4 to SRM 7.
    In SRM 7
    Create Shopping Cart--> In General Data Click the link Set_Values --> Go To Delivery Address/Performance Location tab
    All the fields here are input ready, how can we make these read only?
    Thanks a ton
    Anubhav

    Please I need help too on this :
    When I try to create a SC I get the default address as below which was the og unit address :
    It is picking the address from the Org unit :
    Now If I check the user attributes That I have now added address number data should have been populated .   The attributes address are also seen correctly below in the attributes section below :
    The attributes address are also seen correctly below in the attributes section below :
    However when I create a SC 1001000515 created in test it has Delivery address as blank stored :
    Please can soe  one guide me is this a bug ?

  • How to make fields Read only on all tabs in one go with the help of feeder classes in SAP EHS?

    I have a requirement where once we press SAVE button i have to make all the fields read only in tabs highlighted below.Which is the best method to do it.?
    There are number of fields in all these tabs and we want to make them read only on particular Action event.How to do it?
    Thanks,
    Vimal

    Hi Vimal,
    As I understood you reformulate this question at this page. I will try to help you there.
    Kind regards, Aliaksandr.

  • How to make F-02 only can "park" , not "post" .

    Use F-02 to key FI document , how to make it only can "park" , not "post" .
    I  try to use "PFCG" to find whether any "Authorization object"  to control it ,but i didn't find.
    anyone can help me ? Thank you !
    http://file.itpub.net/forum/201112/07/1518204gdl7ylj0pz1117m.jpg

    Hi:
        Authorization object F_BKPF_BES is used to detain this. If you revoke activity 01 out against a particular GL Authorization group as assigned in F_BKPF_BES , user would not be able to post the transaction. He will only be able to park ..However if you want to make it t code specific then please make use of screen variant and disable the post button in F-02.....
    Regards

  • Facetime not ringing on sleep mode? how to make it ring on sleep mode on my MBA

    my facetime does not ring on sleep mode? how make it ring on my MBA on sleep mode?

    COnnect your iphone to your computer. Once itunes detects your iphone it will ask you if you want to restore and update. Click on that and follow the dirction

  • HT201232 reacently I buy the Ipad Air 2, Insert the sim. how to make calls or recevie calls ?

    recently I buy the Ipad Air 2, Inserted the sim.   I cant able to make calls for with out facetime for other people and also I am not getting incoming calls

    An iPad can only use cellular data services. It cannot be used as a telephone. For that you need the iPhone. You can make calls using Skype or Face Time.

  • Is there additional ring tones? or How to make custom ring tones?

    Hi,
    I am thinking about adding additional ring tones.
    Is there any site I can download the ringtones for cisco 7940, 7960, 7940G, 7960G?
    or
    Can I make custom ring tones by myself?
    If there is an application to do the ring tones, pls anyone let me know?
    thanks

    Hi San,
    Just to add a note to the great tips from Ingo and Bethany (+5 points each folks for your nice work here :)
    Here we go :)
    PCM File Requirements for Custom Ring Types
    The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones:
    •Raw PCM (no header)
    •8000 samples per second
    •8 bits per sample
    •uLaw compression
    •Maximum ring size-16080 samples
    •Minimum ring size-240 samples
    •Number of samples in the ring is evenly divisible by 240.
    •Ring starts and ends at the zero crossing.
    •To create PCM files for custom phone rings, you can use any standard audio editing packages that support these file format requirements.
    Configuring a Custom Phone Ring
    To create custom phone rings for the Cisco Unified IP Phone 7965G and 7945G, follow these steps:
    Procedure
    Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section.
    Step 2 Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide.
    Step 3 Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section for information about how to format this file and for a sample Ringlist.xml file.
    Step 4 Save your modifications and close the Ringlist.xml file.
    Step 5 To cache the new Ringlist.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or disable and re-enable the "Enable Caching of Constant and Bin Files at Startup" TFTP service parameter (located in the Advanced Service Parameters).
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/6_1/english/administration/guide/7965cst.html#wp1097651
    There is a nice little Step by Step here;
    http://www.globalknowledge.com/training/whitepaperdetail.asp?pageid=502&wpid=473&country=United+States
    Or search sites like this one;
    http://www.adman.net/cisco/ringtones/browse.asp
    Hope this helps!
    Rob
    PS: Interesting tunes from your link Bethany, I'd love to hear "Scar Tissue" as a ringtone, pretty cool :)

  • Nokia 5230 - how to make bigger clock ?

    Hello all,
    I bought Nokia 5230 - it has S60 v5 system. I can not find how to make clock bigger than it is now. See the following picture (the right one) http://www.pizero .net/wp-content/uploads/2009/01/redhz49.jpg - I think, that it is possible.
    In the middle of the screen, I have "Add contact" icon. I want to replace it with bigger clock. How can I do that ?
    Thank you in advance.

    Google themes . HTC clock etc .
    and thats a dead link you posted
        jje

Maybe you are looking for