Nokia 5610 security code
I have bought a 5610 XpressMusic few days ago. But the problem is that when i want to change the Security code to my own desired code i get a code error when i enter preset code 12345. I have never changed the preset code before. I'm getting this error all whenever I try to change the security code. What could be the problem?
Take the handset to a nokia Service centre.
They can reset this for you.
A point to note is thats its not advisable to share your handsets imei number for security purposes.
Nokia Lumia 520
iphone 6 Plus.
Be happy !!
Similar Messages
-
Hi, How do I reset the security code of a nokia 5110? I have to add that I don't know the code. Please help, Thanks
The Nokia default security code is 12345. If you have changed it at any point you will have to take your phone into a Nokia Authorized Service point and have them reset it for you
-
hello i bouth 5610 express music frum a guy that lives in egypt so anyway its used phone and there is security code on it... and he dont know the code and so do i is there anyway to reset security code? if ill go to nokia service point they will fix it? how much it will cost? or if ill go to phones shop they will fix it? how much it will cost?
deviltoster wrote:
Like i say in the first post i have tried all codes like 12345 1234 00000 0000 1212 123 no one works so anyway ill call nokia before i go to personal phone shop
Your first post said nothing about trying any codes yourself, and phoning Nokia to ask them a security code if the default one does not work will be wasting your time and theirs.
Just take it to a repair shop, they will require a proof of purchase and it will also cost you to have it reset.
Keep in mind all the data on the handset will be erased.
Message Edited by adamf on 24-Jan-2009 04:17 PM
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left. -
Nokia Belle upgrade on Nokia X7 - Security Code er...
I have just upgraded to Belle software but now there is an annoying thing were I keep getting asked for a security code (which I hadn't used previously) on boot up, if you put the default code in it fails(12345,00000), but if you cancel you can still operate the phone normally.
Very odd...Anyone have any fixes for this?
thanx in advance!skyee wrote:
Hi all,
here's our official Q&A on this.
Q: After the update to Nokia Belle, my phone asks me to enter new security code. I do this and get an error message stating “code error”. What should I do?
A: Please try again a few times. There are very rare cases in which the phone incorrectly asks for new a security code but does not accept the entered code. In that situation the problem vanishes by entering any code until the phone stops asking for it. After this, the code you had entered before the update works again normally.
Br,
yvonne
my E7-00 is asking for a security code in start up, not for a new security code , can i treat it the same ? knowing that i was using a different code than the default before the update.
please advice.
Haikal -
Helloo,,,a have buy nokia 5130 xpressmusic,,,but when i want to set pasword on keyboard,,a dont know the master/security codee,,a try most them,,the default 12345,,but doesn't work,,i try with unlock master code,,but still doesn't work,,, does everybody have idea how i can find or change the security codee,,pleaseee i neeeddd helpp
If you bought the phone new and the default 12345 does not work, then the security code should be in the papers you received with the phone or maybe printed on the box.
If you bought it second hand then the previous owner should be able to help you.
Otherwise you'll have to take the phone to your nearest Nokia Care Point with proof that you are its owner (invoice in your name with the phone's IMEI number, and photo ID) and they'll be able to reset the security code for you. Do a backup before having this done because it might entail a full reset of the phone, which will erase all your data.
Alternatively, you could attempt a firmware update with Nokia Software Updater. A firmware update often resets the security code back to the factory default (but not on all models).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
i have a nokia 6230i. 1 month old bought on 02 pay as you go. but have been using my contract 02 sim in it. now i have decided to use the pay as you go sim because bills are to high. put the pay and go sim in the phone and its coming up security code. iv tried the default number 12345 but it wont unlock. the security code has not been changed.
it works with any other sim card in it apart from the one it came wiv. can you help?You have to wait 15 minutes if you have tried three times before you entered 12345. It locks.
Thanks, dan. -
Nokia 7373 - Security Code Forgotten
Hi,
I can't perform a master reset on my phone or delete contacts from the phone as I seem to have forgotten my security code (although I do still know my PIN so can access and use the phone). So far I have tried the following codes:
0000
1111
12345
and the one that was generated by my IMEI number from another website
...but each time I get a "Code Error" message. I phoned Orange and they told me that you can't change the Security Code yourself and that it must be 1111 or 12345 but obviously these don't work and Orange are wrong. Any help would be much appreciated as I want to give the phone to my sister as I've recently had an upgrade.
Thanks. JeannieThe default security code is 12345. If that does not work then someone has changed it.
The ONLY way to reset this code is at a nokia care point. They may charge for the service and you may lose all data from the phones memory.
They will also need to see proof of purchase/ownership before they will do it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.
Message Edited by psychomania on 27-Oct-2008 03:22 PM -
While i was using my Nokia 1208 last night, it spontaneously turned off. When i turned it back on and typed in my PIN, it requested a security code. The default 12345 wouldn t work and i have never changed the code. This is the 2nd time this has happened to me and the first time it was just impossible to fix it so i bought a new 1. Can some please help or post of you have had a similar problem!
if the default code is not 12345 the operator must have changed it try calling them
try removing battery for ten minutes 1st then repeat the proccess if that fails call operator
or try the following
1. Get the phone reflashed.
2. On some phones the reset function will also reset the code to 12345.
You could try the second option but no guarantees it will work on your phone. Also, you may lose all your data if you reset the phone so remember to back it up before resetting.
Always remember to backup your phone before performing resets as your data may be lost.
First try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Nokia 9300i security code locked
Hi.Does anybody know what to do if I forgot the security code number and the system is locked on Nokia 9300i ?The phone is usless.I tried the master code but it does not work at this problem.
thanksIf google or searching this forum offers no solutions then your only option at this stage is to take the phone to a nokia care point along with proof of ownership.
http://europe.nokia.com/support/repair-and-recycle/repair/care-points
If you cannot provide proof of ownership, (such as a purchase receipt or original box) then it's entirely at the care points discretion as to whether they will help you. -
Yesterday I switched on my Nokia 500 with pin code and security code with out any trouble,but after few minutes it restarted and security code is not accepted, ,I can answer the incoming calls, but i cant connect it to nokia suit help me with this ,
The default is 12345 have your tried that?
If you cant fix this it will have to sent to a nokia care point.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Nokia 2760 security code forgotten
Hello I put a security code on my Nokia 2760 and I have not used it some time (4 months) because I do not have money to put credit on my SIM card .
And now I am trying to use the phone and I can not use it, it ask me for security code and I do not know it anymore.
What I should do please help me?Thanks in advance for your answers. And sorry my mistakes in writing.
I do not have an USB cable I did not received one when I bought my phone.
Solved!
Go to Solution.Hi emanuelleu,
Thanks for your post and welcome to the Nokia forum.
We are really sorry for this inconvenience.
In order to fix this issue, I would advise you to visit your local nokia care point. Your phone will be reseted to the default code "12345".
Hope this helps and feel free to post any other questions you may have.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated. -
when i switch on my nokia 500, it always ask the security code. so, please give me steps to off this setting.i want that mobile should not ask the code while switching on.
Please take following steps & you will get solution
1# go to menu> tools > settings > general > security > phone & SIM card
2 # now set ''PIN code request'' as ''off''
3# set '' phone auto lock period '' as ''none''
4 # set '' allow remote lock'' as ''no''
# If this is helpful, please click on ''accept as solution'' & add ''kudos'' i.e. Blue Star.
Thanks for reading Happy to help.
Using Nokia E63-1 (308.07)
510.21.010 (28-03-2011)
RM-437 [S60v3 FP1] -
I locked my self out of my Nokia C3, I was entering a new Security Code and I miss pressed a button and don't know what my password is. I've been trying for 3 days straight.
I contacted my Provider and they couldn't doing anything for it, because I couldn't retrieve the PUK Number.
So if anyone knows how I can fix this please help!
Also what information do I need to help Nokia fix my problem faster?
Thanks,
AhmedThe ONLY solution is to visit Nokia Care and get it Reset.. In absence of back-up.. you tend to lose your important data...
-
Nokia 1110 SECURITY CODE NO.
Hi,
I have a problem with my Nokia 1110.
I can not recall my private security code No.
Is there any way to find it or reset the phone?
Your answer may help me so much.
Thanks,The only way to reset that is to flash some new software on it.
If you are still stuck take it to your local Nokia Service Centre and they can reset it for you.
www.nokia.co.uk/repair
Nokia N95
V 20.0.015
0546553 -
hey well i got a nokia C6-00 and i put a security code that i forgot
PLZ HELP!!
Solved!
Go to Solution.hey well some people tell me that i can fix it by software update (but it doesnt work without lock code) and other people tell me i can hit simultaneously keys on the keyboard that will format it
Please helpp if u know a way that can help me through these two suggestions and thanx
Maybe you are looking for
-
Report to capture Unplanned Delivery
Greetings ALL, Is there a report that will capture Unplanned Delivery Costs, located in tcode MIRO? Or a report that will show me if the PO History consists of Subsequent Debit/Credits? Thanks, Minh Pham
-
Best practice for action that needs to execute after a successfull login
hi all; i am looking for a good approach for dealing with the following scenario: i have a jsf command link with an action - everyone have access to this page. when the user clicks the command, the next page is a realm protected resource, so the logi
-
What is SAP recommended approach to create multiple Sender Idoc_AAE adapters channels?
Hi All, We have more than 100 interfaces which receives Idocs from multiple SAP ECC Systems. What is the best approach to use Idoc_AAE sender adapter with multiple communication channels for One system and for multiple SAP systems as well. Q) How man
-
Which RFC describes the illegal subnet masks (255.255.255.254, 255.255.255.255)?
-
Error when refreshing essbase using Planning 3.5.1
Hi - I am trying to refresh Essbase using Hyperion Desktop. I get an error message that says "errors detect (1018,5): member cannot be set to specified data storage attribute. Level zero dynamic members must have an associated member formula. -214721