Nokia 5610d-1 shutting down 2 second after start

Hi!
How to reset NOKIA 5610d-1 to factory settings?
I tryed to enter *#7780# but i have no time to enter all this digits. I tryed 100 or 200 times and now i can enter this code too fast to see next screen and security code request. But it's no more possible to enter the code before the phone goes down.
The problem comes with some theme installed. Batteryes are charget completely. 
I heared something about safe mode, but can't find any information for this model.
Please help! 

format nokia 5610d-1

Similar Messages

  • My MacBook Pro shuts down within seconds after starting with a Gray Screen and Apple Logo, a bar comes at the bottom.

    My MacBook Pro starts with a Gray Screen and Apple Logo, a bar comes at the bottom, but after few seconds the machine shuts down. This was bought approx 1 year back. Please help!!

    jayanta.ray,
    which model MacBook Pro do you have (did you buy it new?), and which version of OS X is installed on it?

  • A135-S2266 shuts down 4 seconds after start

    I have tried everything I know to get this machine to start. It had been dormant for about 8 months after shutting down suddenly while browsing the internet. I fully charged the battery and the front panel lights work properly. When I press the start button the fan comes on for about 4 seconds and then shuts down. No video either in the screen or an external monitor. I have tried replacing the memory and disconnecting the hard drive to no avail.I have tried startup on both battery power and external charger power.
    Any help will be appreciated.

    Many items can cause this to occur.  Shutdown is the unit way of preventing further damage.  Feasible the hard drive is in failure mode. There maybe dust build up around the fan and exhaust ports needing cleaning, check the power adapter and cables for any signs of fraying/split aspects.  You mentioned 'replaced memory' feabile you are using an incompatible module not set to work with that unit. Resetting the hard drive you must ensure that the pin connectors are aligned completely and fully pushed in.  Just some areas for you to work on to see if they resolve the problem.

  • Imac shuts down 5 seconds into start up. Troubleshooting not working.

    Imac shuts down about 5 seconds after starting.

    Aubrey2320 wrote:
    iMac, purchased last year
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.
    OOW:  Take your Mac to your local Apple Store or an AASP.  Diagnostic testing is FREE!
    Other OOW options:
    How to save money on Mac repairs with your credit card’s extended warranty
    Troubleshooting not working.
    There is nothing anyone here can do as you did not provide any of the steps you've tried to solve your problem.  Need details to avoid the been there done that scenarios.

  • Mac pro shuts down 5 seconds after first time starting up

    my new mac pro won`t start up properly, I push the start button, the start up image appears on my display and 5 seconds later the computer shuts down without any visible reason or notification. It`s a Mac Pro bought in the US and I`m trying to use it in Europe...
    I`ll appreciate any advice you can give me!

    Try a SMC reset.
    DALE

  • Why does my IMac shut down five minutes after start up?

    I have a 21" Imac, purchased 2010. If I don't login to a user account within five minutes of start up the IMac shuts down.  It used to go to a sleep mode.
    My OS is Mavericks, 10.9.3.  I also have the latest security update.  A message comes on the start screen within one minute.  It reads, if you are having trouble entering your password press the start button to shut down, then press again to enter a recovery OS.  If I login within 5 minutes of start all is well.
    Thanks, Gary

    I have a 21" Imac, purchased 2010. If I don't login to a user account within five minutes of start up the IMac shuts down.  It used to go to a sleep mode.
    My OS is Mavericks, 10.9.3.  I also have the latest security update.  A message comes on the start screen within one minute.  It reads, if you are having trouble entering your password press the start button to shut down, then press again to enter a recovery OS.  If I login within 5 minutes of start all is well.
    Thanks, Gary

  • IPad 1 pre-installed applications shutting down just seconds after loading with no apparent reason

    I've been using a second-hand iPad 1 running the highest available version of iOS for around a week now, but recently, when I wanted to use a preinstalled application they would load, but just around a second later I would be at the home screen again.
    (I'm not really in the mood to explain deeper right now, I'll reply to any questions I'm asked...)

    Is it just the pre-installed apps, or most all apps.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Unfortunately, since these were pre-installed apps, you can't delete the app and re-download.
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
     Cheers, Tom 

  • Computer shuts down 5 seconds after mouse stops moving

    As soon as the computer turns on it comes up with the shutdown/restart box. Have to press escape to cancel the shutdown. If the mouse is moving it is fine but as soon as it stops, 5 seconds later the box comes up and tries to restart. If I let it, it restarts and happens again.
    Any ideas?

    Try a SMC reset.
    DALE

  • Mail shuts down 10 seconds after opening.

    I don't have any "to do's" in my calendar as stated in other discussion topics.
    I cleared my mail cache . . . cleared cookies . . . I just don't know what else to do.
    I'm sure the switch to Leopard is causing the problem.

    that may be an entirely different issue.
    how many accounts do you have? and where are you trying to send from.
    for each account you should have an outgoing server set up. See mail>preferences>accounts>account information, when clicking on outgoing mail server you will see a list of all the smtp servers you have, the first one being for the account that is highlighted in the left hand side column. what you could do is to click on the "edit server list" and then go to advanced, and then re-enter your password and click ok, see if that solves the issue. If it does not you may want to change the port, but before you do that you may want to browse this forum for your ISP to see what server port others use.
    Furthermore, depending on where you are trying to send may make a difference. For example, if you are at home, with your own internet connection, you might send without a problem. But if you are at a friend's place on his/her internet connection you might not be able to send, as his/her ISP might prevent you from doing so, in which case you may need to add their smtp info to your outgoing server list.
    Finally, it might just be a case of your ISP being temporarily down, and just being patient.
    hope this helps

  • Reader X shuts down 10 second after opening a pdf.

    I re-installed the reader, same result. It worked fine till couple of days ago. No other new software installed before. Anybody know this problem? What about a solution ?
    Thanks

    Its really difficult to answer this qithout sufficient information. Please let me know the following:
    1. Your OS
    2. The version of Adobe Reader. You can get the same by clicking on Help > About Adobe Reader.
    3. Are there any 3rd party plugins installed.
    4. Does launching the Preferences Dialog (You can get it by cliking on Edit > Preferences) result in the same behavior.

  • Macbook pro shuts down two minutes after start up

    Hi
    Can anyone help with a problem on my Macbook Pro. I have had it for two days and loaded all of my info and set up everything as I would like it and it froze.
    I waited and waited and in the end had to power down. When I restarted it I get the spinning wheel for about two minutes then it just shuts off the power. I have tried to start in safe mode etc to no avail.
    I feel so unlucky with Apple as month ago I bought myself a new Imac and within three weeks the hard drive failed. They have replaced it with a new one but now this problem is making me feel unsure about Apple am I just unlucky? Thank you

    The forum you want MBP
    http://discussions.apple.com/category.jspa?categoryID=190
    Or try Using Snow Leopard also
    http://www.apple.com/support/macbookpro

  • Mac Mini Tiger: halfway thru install dvd for snow leopard, install stops due to needing Leopard first. Unable to find command to exit installation, I force ejected dvd, now computer shuts down thirty seconds into powering up.

    No combination of keys held down while powering up, nor unplugging from power source, will give me a screen, or utilities, or rebuild; the machine just shuts off thirty seconds after starting to power up.

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Then try booting from install DVD.
    It sounds like the SN DVD was an upgrade-only disk. Those only upgrade from Leopard,

  • My ipad shut down and restart after

    Hye
    My iPad shut down and restart after alone CAN you ex plain me what CAN i do

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • My IMAC seems to have died after power surge. It shut down and won't start.  What shall I do?

    my IMAC seems to have died after power surge. It shut down and won't start.  What shall I do?

    I would recommend you try an SMC reset at this point:
    Resetting the System Management Controller (SMC)
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    If that fails to solve it, it is probable that the power surge damaged some of your iMac's hardware components, and will need to be repaired at an Apple Authorized Service Center.

  • HT3964 my macbook air keeps coming up with a message" are u sure u want to shut down..etc" after which it switches off by itself. now it's off and will not power on altogether. any suggestions?

    my macbook air keeps coming up with a message" are u sure u want to shut down..etc" after which it switches off by itself. now it's off and will not power on altogether. any suggestions?

    Does it power on if you plug in the charger?
    But to be honest I see in your description it says 'Late 2011' so there is a good chance you have warranty right, I would take it to Apple store and let them sort it out

Maybe you are looking for

  • [SOLVED] /sbin/init does not exist error on boot

    Hi all, Let me first say that Arch Linux is a great distribution and I couldn't be more happier with it! Thanks to everyone who is involved in building it. However, as the subject line suggests, I have run into a problem. I have tried every trick in

  • Looking for a sports video camera that is compatible with the mac

    Looking for a video camera that can record sports well and is also compatible with the mac. I've been using iMovie to edit videos for a highlight reel of my highschool soccer games that I coach.

  • .dmg files open disk utility. Can't install new software

    For the last few months I've not been able to download and launch disk images (.dmg files).  Instead of a dialogue asking if I want to launch the downloaded file or some other natural step in launching the disk image, I hear the hard drive boot as if

  • Opening Office Documents from Flash

    Hi, we're working with a product called ProForm to create online courses that are Flash-based.  It's a pretty cool product, created by Rapid Intake and using ActionScript 2 as the basis. In a recent course I've been running into a problem.  I've crea

  • Phased SAP implementation - Quick qestion

    Hi,          We are having a phased implementation for the plants in SAP and BI is also going live at the same time. Only few plants are going live at the time of Go-live and the rest of the plants will be implmenting SAP in a phased manner. BI needs