Nokia 5800 restarting automatically after firmware...

recently i had updated my firmware through phone itself,after that its getting restarted automatically once or twice in a day. Since the problem persists i reinstalled the s/w through system also.but the problem is still there ,can anybody help me

hi, I had same problem when I upgraded my damned 5800 to version 50. At first after the upgrade, it was reseting once in 2-3 minutes. I decided to format sd card and after that reseting times reduced to twice a day espicially after sending sms. Changing the microsdhc card with an old one with 1 GB capacity, compeletely solved the problem. Yesterday I bought a brand new micro sdhc : Verbatim 8GB class 4; but its the problem : its not working well. its slow and while connecting to pc it causes some fault. but the restarting problem is solved. Please recommand me a good microsdhc card.

Similar Messages

Nokia 5800 Screen Problems After Firmware Update V...

Hi all,
I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
Heres what I've done to resolve the problem:
- remove the battery, memory and sim cards for a few hours.
- reboot the phone without the memory card(eliminating any corrupt setup files).
- reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
- tried running the updates on all XP, Vista and Windows 7.
Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
Thank you all for your help.

There is another way to hard reset your phone and it is as follows.
With your phone powered off, press and hold Green + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
Always remember to backup your phone before performing resets as your data may be lost.
This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

Nokia 5800 XM: Problems after firmware upgrade

Hello all,
I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
Thanks in advance for your help.

Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

SSRS 2008 R2 Services not restarting automatically after reboot

SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAM

Hi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support

Server0 node restarts automatically after 10 minutes...

Hello Portal ppl..
I have encountered a troublesome porblem at My portal server.
Server0 node restarts automatically after 10 minutes...showing yellow status..
Following is developer trace of server0 node:
[Thr 373752] Tue Dec 30 12:52:01 2008
[Thr 373752] JLaunchISetClusterId: set cluster id 12403050
[Thr 373752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 373752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 377684] Tue Dec 30 12:53:00 2008
[Thr 377684] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Following is developer trace of jcontrol.exe node:
[Thr 379212] Tue Dec 30 12:51:37 2008
[Thr 379212] JControlICheckProcessList: process SDM started (PID:379984)
[Thr 379212] Tue Dec 30 12:51:57 2008
[Thr 379212] JControlICheckProcessList: process server0 (pid:380868) died (RUN-FLAG)
[Thr 379212] JControlIResetProcess: reset process server0
[Thr 379212] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID12403050 1230620106 -bz D:\usr\sap\E70\SYS\global
JControlStartJLaunch: program = D:\usr\sap\E70\JC01\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\E70\JC01\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
-> arg[02] = -DSAPINFO=E70_01_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\E70\JC01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_359972
-> arg[06] = -nodeName=ID12403050
-> arg[07] = -jvmOutFile=D:\usr\sap\E70\JC01\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\E70\JC01\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\E70\JC01\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\E70\JC01\j2ee\os_libs;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
[Thr 379212] JControlICheckProcessList: process server0 started (PID:358680)
Please Help.....

Hi,
To see the log files,
You can create an iView based on the below par file
com.sap.portal.runtime.admin.logviewer.
Use the component default in the PAR File.
Preview this iview to see the console for logs.
And regarding your error,Please check if the there is free space in the Hard Drive of USR folder
Also recheck the JVM settings according to Note 723909 - Java VM settings for J2EE 6.40/7.0.
Based on the 32 bit or 64 bit OS,the parameter values differ
Following are the Parameters for 64 bit OS.
-XX:MaxPermSize=512M
-XX:PermSize=512M
-Xmx2048M
-Xms2048M
-XX:NewSize=320M
-XX:MaxNewSize=320M
Hope it helps.
Cheers,
Santhosh

Motorola DROID X Restarts Automatically After I Shutdown

My Motorola DROID X Now Restarts Automatically After I Shut It Down (50% of the time?). It worked great at first.
I have used soft & hard resets & this problem persists.
Is there a software fix for this?

Thank you Vanessa for acknowledging the problem and for Verizon working on a solution!
Mike
VanessaC_VZW wrote:
Good morning and thanks for all the feedback!
This issue has been lifted up, as there have been other reports of the Droid X powering up on its own after being turned off. Our product team is working to resolve this; however, there is no date on a software resolution yet. Once a software update becomes available, it will be pushed through your phone.
We appreciate your patience.
Thank you,

My iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

my iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

I am having the same issues--just got off phone with customer service rep--was told that my phone is in recoveyr mode and that I would have to restore it, however, the only things that would be restored would be from my last backup which was in November 2013! I was also told that apple users should not update as soon as the update is available (so why are they sending it to us if they're not sure that there will be any problems!!!). I can't restore now since I am in work--will do it when I go home tonight. In the meantime, I am without a working iphone for the day! This is horrible--I see I'm not the only one who has experienced this!

How to get Mavericks server that is connected to a UPS to restart automatically after a power outage.

This is driving me crazy. Is there anyone running Mavericks as a mission critical server on Backup Power Supplies that has a way to get the servers to restart automatically after a power outage. The UPS vendors all have software for Windows, but not Macs, and the setting in System Preferences, doesn't work with the UPS's Iv'e tried (2 different APC models (Smart and Back-UPs), one Triplite (Smart) and one CyberPower, (all claiming to be Mac compatible))

APC do apparently still do a command-line daemon (PowerChute Network Shutdown) which monitors over the network the UPS and will cleanly shutdown the Mac. For lower-end UPS devices these are typically connected via a USB cable and the built-in Apple System Preferences let you control the options - if it is a model supported. There is however a big limitation of using a USB connection which is that you can only connect a single computer to a UPS via USB and of course most companies have multiple servers.
It maybe that what is happening even if you use APC's software is the following -
Power failure detected by UPS
Signal sent to Mac
Computer does a clean shutdown
Power restored
UPS has no way to tell Mac because it is shutdown and Mac does not support 'Wake on LAN' if fully shutdown
The Mac does have an option to 'Startup automatically after a power failure'. However this might only take place if the Mac is not cleanly shutdown, it could be that if the Mac is cleanly shutdown it does not count this as a power failure. If this is correct then there is nothing that can be done as users to resolve this, the only way it could be resolved would be if Apple provided a way for a tool like APCs software to both do a clean shutdown and set a flag as this being due to a power failure so that when the Mac does detect the power being restored it triggers the Mac in to booting.
In the dim and distant past when Macs used ADB to connect keyboards and mice the ADB interface did support an external power-on signal. This does not exist for USB.
Personally I have regarded the APC software (PowerChute Network Shutdown 3.0.1) to be so badly supported and so old as to be too risky to use. It lists 10.7 and 10.8 but not 10.9 and uses Java 1.6 which itself is unsupported. There is a third-party tool you might want to look at called NUT (Network Ups Tools) see http://www.networkupstools.org
NUT is free and lets you do clever things like -
Connect a single computer via serial or USB to the UPS
Act as a 'server' over the network to other computers sharing the UPS
When power failure is detected the NUT 'server' sends a signal to the NUT 'clients' so all of them know that there is a power failure and can do their own clean shutdowns
This gets round only being able to connect a single computer via USB.

Phone hangs and restarts automatically after sim c...

phone hangs and restarts automatically after sim change in my lumia 520.
why is it happening? Can anyone help?

Teh SIM you put in was that anew or a used SIM? if not new get it replaced for one.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

My nokia 500 restart automaticly what should i do ...

my nokia 500 restart automaticly what should i do ? I also updated it once but problem prist nd some times its camera also doest open plz suggest me what should i do ??

Hi ARehman,
Welcome to the Forum.
Could you check if your phone is up to date? Enter *#0000# on your keypad to display your current software version.
You could check the latest software for Nokia 500 here. If your phone needs to be updated, I would advise you to download Nokia suite and connect your phone to your PC.
Pfrancoise.
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

I am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

i am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

basically i bought this phone from canada & using it in india. i tried to contact apple support in india, they told that the warranty is valid in the country where you purchsed this phone. very ammazing. Apple is a very big brand name & they are not serving their costumers in other country. any suggestions?

Nokia 5800 stays connected after POP3 mailbox chec...

Hello,
I have configured POP3 mailbox account, and after manual checking for new mail, GPRS connection keeps active even if I close my mailbox. Automatic retrieval and Notification is turned off.
Firmware V 21.0.025
Nokia 5800 XpressMusic

Ok, it's realy strange, I tryed one more time, and now all is working properly: I can Connect/Disconnect, by closing mailbox with software key it promts for connection to break. The only thing I noticed that sometimes when I press red button, mailbox closes without promt for disconnection, connection keeps alive (main indicator), but if I open Messages there is no connection icon on on my mailbox as usualy in most cases by closing with red button. Anyway... it's working now.
I also found information, that there was also such kind of problem to others and another way to break connection is long press of red button.
Nokia 5800 XpressMusic

Nokia 5800 restarts when opening themes

Hi, I have been experiencing a problem with my nokia 5800 ,, everytime i go to the themes panel from settings the phone restarts , what could be the problem ? please help ...
Thanks

go to application...file mgr and then select ur card and and in option u can get format ...
after formatin you can get rid of this problem...but first of all backup all the files

Nokia 5800 completely crashed after a failed softw...

Whilst carrying out a software update my computer lost connection with the internet, this turned my phone off, after trying to continue with the update which was un-successful I unplugged my phone from the computer, this resulted in my phone completely crashing? Now when I switch it on it just vibrates for about 20 seconds with nothing on the screen! After it has finished vibrating it is then completely shut down again. I have tried some methods of starting up but to no avail as I'm limited as to what I can do with it as it is touch screen!
Any advice & help would be much appreciated.
Cheers
Al

I bought a brand new Nokia 5800.... As Nokia site sayings Nokia 5800 can plays music up to 35 hours... But my Nokia 5800 plays only 18 hours... My phone has original battery and latest firmware version... Please let me know about this matter...
Glad to help

Xperia L is turned off and restarting automatically after the 15.3.A.0.26 update.

After the new update to Build Number : 15.3.A.0.26 My Zperia L is getting switched off and restarting automatically while using the google chrome for internet surfing.I tried software update using sony pc compain for more than 8 times. Tried out all the facilities provided by sony,but it didn't come to use.My phone was working properly before this update.now i cant even use it,i dont know when its going to restart,when its going to freeze.tried out all the possible helps from sony.please find a solution.And don't provide any lame updates like this.sony mobiles are getting worse after the software updates.Please provide a stable firmware.Hoping for a favourable reply.

Do you experience the same problem in safe mode?
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
If you do, please reinstall the phone software using Update Service:
http://www.sonymobile.com/global-en/tools/update-service/
You could also try to remove SIM and SD card from the phone and try the phone without to see if you experience any problems.

Nokia 5800 restarting automatically after firmware...

Similar Messages

Maybe you are looking for