Nokia 5800: Setting the Messages save to Memory Ca...

Software version:
V 21.0.025
Custom Version:
21.0.024.382.02
The settings for Messages cannot be set to Memory Card. It always sets to Nokia Phone.
I cannot be able to create a new Profile in Profile Settings.
Please help me. Thanks

I can mark all the messages, but the option to copy them to phone memory does not appear! I'm using the lastest firmware for my Nokia 5800.

Similar Messages

I have set the Message History setting to delete messages after 30 days. Since doing this, Messages app is quite buggy.

I have no need to keep huge, old Messages conversations, so I recently set the Message History to delete messages after 30 days. Since doing this, however, I have noticed that the Messages app has become fairly buggy. Sometimes I'll open the app and it will look like there's no conversations, and the app prompts me to send a new message. Sometimes, I'll open the app to reply to an incoming message and my response will hang at 90% sent and then when I go back to the conversation list, it displays my outgoing, as-yet-unsent response as a new message, complete with little blue new message marker. The only way I have found to temporarily resolve these issues is to restart the phone. What's going on here?

Hi,
According to your description, I understand that you need to apply a rule to delete messages older than 30 days for all mailboxes in your environment. Is it right? If I misunderstand, please point it out.
As all above suggestions, we can use retention tags and retention policies in Exchange 2013 to achieve it. To apply it, we can try the following steps:
1. Login to Exchange Admin Center(EAC) in Exchange 2013 as an administrator.
2. Click compliance management > retention tags.
3. Click New Tag > applied automatically to entire mailbox(default).
4. Edit the Name, Retention action and Retention period(30 days), then
Save it.
5. Click Retention Policies tab > New.
6. Edit Name and add the Retention tags you created a moment ago. And
Save it.
7. Navigate to Recipients > Mailboxes.
8. In the list view, use the Shift or Ctrl keys to select multiple mailboxes.
9. In the details pane, click More options.
10. Under Retention Policy, click Update.
11. In Bulk Assign Retention Policy, select the retention policy you created to apply to the mailboxes, and then click
Save.
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

Can I set the default save location in text edit to dropbox?

I'm happy with dropbox for now and want to set the default save folder to a dropbox folder but I cannot see how to do this.
Can it be done? Or do I need a 3 party text editor?
Thanks
Tom

You cannot. Because this option both takes much longer and reduces the quality of files, it has to be chosen specifically.
In any case, when you save a PDF file from Word. this process does not involve Acrobat or Adobe software in any way.

How to set the message in the status bar...

hai,
how to set the message in the status bar...
let us say "inserted data successfully, or opening page followed by the link clicked on the screen....."
kindly help me out

sunil,
do not use advise by Ashutosh with WebDynpro.
Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
wdComponentAPI.getMessageManager().reportSucces("Record inserted");
VS

Troubleshoot-Adapter engine:Error Setting the message status to DLNG failed

Dear Experts,
We use SAP RFC- PI-JDBC(MSSQL). here the Data(message) successfully transfered to mssql table but the status is been set to DLNG failed, And it finally shown as SYSTEM ERROR.
QoS required: ExactlyOnce , here The Message has got inserted in that particular table and in PI adapter the status turned to DLNG faild and the service again tries to send the same message which is not possible becoz the data is set for primary value.
2010-09-15 09:59:48 Success Message successfully received by messaging system. Profile: XI URL: http://XXXXX:50000/MessagingSystem/receive/AFW/XI Credential (User): YYYY
2010-09-15 09:59:48 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-09-15 09:59:48 Success Message successfully put into the queue.
2010-09-15 09:59:48 Success The message was successfully retrieved from the receive queue.
2010-09-15 09:59:48 Error Setting the message status to TBDL failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 09:59:48 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 09:59:48 Success MP: Entering module processor
2010-09-15 09:59:48 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 09:59:48 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 09:59:48 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 09:59:49 Success Database request processed successfully
2010-09-15 09:59:49 Success MP: Leaving module processor
2010-09-15 09:59:49 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-09-15 09:59:49 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 10:37:01 Success The message was successfully retrieved from the receive queue.
2010-09-15 10:37:01 Success The message status set to DLNG.
2010-09-15 10:37:01 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 10:37:01 Success MP: Entering module processor
2010-09-15 10:37:01 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 10:37:01 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 10:37:01 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
Thanks in advance for your valuable answer.

Hi Vinaygam,
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
See above error, It cannot the Duplicate Key in your log table. Duplicate means repeated as a same data.So kindly check once your data.
IF,I assume your scenario is Synchronous, If you are using any sender JDBC adapter just check with your Quality of Service and set it to "Exactly once".
so kindly do it.
Thank you,
Sateesh
Edited by: sateesh kumar .N on Sep 17, 2010 8:17 AM

Manipulate / set the Message-ID?

Hi folks!
I have the following question! Is it possible (e.g. in a java-mapping) to explicitly SET / CHANGE the message-ID of a subsequent message?
Short description of the task we have to implement: We get a big XML which includes many seperate invoices. Each invoice has some "unique data which identifies the invoice uniquely". This data should be used as "message-ID" within XI (monitoring, retry, ...) So I like to use BPM to SPlit the big XML and send the separate XML Invoice asynchronously to a subsequent process. The message-ID for this asynchronous sending-process should be SET to some identifier which is included in the XML Invoice itself ...
Any ideas how to accomplish that? Is it possibly to SET the message-ID (to read it one can use the "MESSAGE_ID" System constant within java-mapping or java function - I know). Has anybody done that already?
Thanks for any input you can give on this ...
Best regards, Andy

As Michael stated above ...
All the info so far is regarding getting the values of runtime constants (and the special case of getting them in the BPE environment) but not how to SET them (if even possible) - maybe one solution is that I use the HTTP Sender Adapter to post the message to the XI Integration Engine itself - in this POST one could manipulate the "MSGGUID" Parameter for defining the Message-ID explicitly?
Could this work?
Thanks, Andi

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim even if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

Doesn't sound like it. It sounds like you're being logged-off.
Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc?
If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
You need to know which it is, as these will have very different causes, and different places to look for a solution.

FM required for setting the message body with values from table

Hi all,
I have a retq wherein in tcode VL31n when i create the IBD,after saving the document,i need to send a mail to few people in the FI dept with the foll deatils:
Inbound delivery no.
A. Bill of Lading no.
B. Bill of Lading date
C. No. of containers
D. Invoice no.
E. Invoice date
F. Supplier name
G. Vessel name
H. Name of the receiving port
I. Final Destination,,
J. Expected date of arrival
The method used is SAVE_AND_PUBLISH_DOCUMENT.i get all these deatils in the table it_xlikp.But is there any FM by means of which i cna read these values and set the message body with these values and send this as a mail using the FM SO_DOCUMENT_SEND_API1?Full points will be awarded..Any help is appreciated..
Regards,
Disha.

HI Disha
Check out these links. They will surely help
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
If you find this answer useful, please reward me for the same.
Good luck
Karthik Potharaju

Nokia 5800: cannot open messages, error when start...

In the last day, I've had an issue with my 5800 whereby when a new text message arrives, I am not able to open it fully. It seems stuck in the inbox. This has happened about 3 times.
I restarted the phone and got this message:
"Unable to install from memory card. Go to application manager" (or something like that).
I went to the application manager, but there was nothing in there.
When I went back to the messages inbox, all messages (inbox, draft, sent) were gone.
I've tried changing back and forth between the phone (C and memory card (E drives, but nothing is showing.
Any advice would be more than helpful. Thanks.

Hi, may also help if once you've cleared all messages if you go to options in messaging and select other, memory in use; select E:Mass memory, or F: Memory Card . Sorry if you're already aware of this, but it does help, also , after using usb cable always check this setting as , for some unknown reason, phone reverts to C, after being connected to computer! If there are messages you may need, sync with ovi, before deleteing. Hope this helps.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Nokia 5800 - Loses the wireless connection

Hello.
I have a Nokia 5800 cellphone from a week ago.
I have a problem with the WIFI (Wireless connection).
If I connect to a WIFI, in approximately 5 minutes the connection hangs, losing the connection. It seems random hangs.
It happens in all applications, and I have to connect again.
I tried with several different connections (WIFIs), and the same result.
Sometimes it stays connected longer, but generally falls.
Anybody know it can be, and the solution?
Thank you very much.

I have had this happen as well sitting right across from my router. Can be working fine and then all of a sudden kicks me out to the home screen. Since there is no connection failure message I have to conclude that it is a random bug, possibly with the built in browser. I have not tested this with Opera Mini yet to see if it is hardware or software related.
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

Nokia 5800 recieving text messages

I have just recently purchased a Nokia 5800, why is it when i recieve text messages the senders name doesnt appear? all it says is 'one new message', is this standard for nokia phones ?

Hopefully you are still following this thread and will see this:
Skyestream have released a version of skyecaller that is compatible with the 5800xm. This will give you the senders name and photo when you receive a message.
Get it here:
www.skyestream.com/cart/shopcart_sc3_main.htm

Nokia 301 set the alarm tone

Hi,
is there a way to set different clock alarm tone? (I didn't manage to find it in the user guide)
Thank you
Solved!
Go to Solution.

farby is righ....
When you are setting the alarm time, if you scroll down there is an option to set the Alarm tone - Standard, Radio, Open Files, Tone downloads.
Use Open Files > Alert Tones and there are some different tones you can use there.
Edited to add: And while mucking about with it myself, up popped the message that you can switch your phone off at night and the alarm will still go off to wake you up. That's a nice feature.... though considering all the questions about battery life, how will that work!? Just checked the 206 does this too, is this a general feature of Nokia phones?

How can I set the default save format for photoshop edited photos?

I just spotted that some of my photos that I've edited in Photoshop from Lightroom are a whopping 450MB. Looking deeper I found that they are saved as uncompressed TIFF files, this despite the default save format for Photoshop in Lightroom's preferences being set to ZIP compressed TIFF files. So why doesn't this setting work and how can I make Photoshop save things compressed?

Sounds funny but first tell us what version of PS you have, what version of Lr and which OS. Thanks.

API to set the Message State

Hi,
is it possible to set the PI Message State to Application Error in Message Mapping or/and in Adapter Modul ?
best regards,
Hai

Hi,
in case you want to get the whole soap fault message (do not use soap evelope) and handel it youself. You may want to set it to application fault and forward the fault message to caller.
regards,
Hai

Does the Nokia 5800 support the SU-33W with Mobile...

I have a Nokia N73 and a SU-33W, and I was thinking about upgrading, but according to the Nokia SU-33W support pages very few phones support the device (or DVB-H in general for that matter).
Strangely I found a movie on youtube of someone with a Nokia 5800 that is using it with the SU-33W:
Nokia 5800 and SU-33W
There is also some mention of this on some other sites:
daily mobile
But on the Nokia 5800 or SU-33W page on the Nokia site there is no mention of this. Also the Manual of the 5800 doesn't mentions anything about DVB-H compatibility through the SU-33w.
Is this a special kind of Nokia 5800? Or is it just a normal 5800 with updated firmware that added the functionality?
Solved!
Go to Solution.

Yes Nokia 5800 does support SU-33W ,go to http://www.nokia.it/telefoni_accessori/accessori_nokia/tutti-gli-accessori/casa-e-ufficio/adattatori... it's all Italian as they are one of the few countries who are operating this service, I found the N85 version works with the 5800 ( the N73 version did not) , download the file (sis) that means it's a sybian file (Nokia) now you need to open it to install, the way I done it was to email the file to your 5800 ,open the email click on the sis file in the email to open it and it will ask you if you wanrt to install, click yes, I think when I done it it may have said incompatable I ignored that, so install and hey presto you have MobileTV in your applications you will see the MobileTV Icon, if you have the SU-33W paired it will search for program guides for TV but will find none as they don't exist in UK and you will see other options like you can check the battery level on the SU-33W from the 5800 (cool) , there are no DVBH service in UK at the moment.hope, this helps you guys

Nokia 5800: Setting the Messages save to Memory Ca...

Similar Messages

Maybe you are looking for